IMTC 2017 Lightweight Structures
3rd International MERGE Technologies Conference
1st Edition
Published in September 2017
Book
Paperback/Softback
203 pages
978-3-95735-066-4 (ISBN)
Description
Large-scale suitable production processes for the manufacturing of hybrid lightweight components are key technologies of the future. In accordance with the challenges of increasing mobility and climate change, the conservation of resources presents a central responsibility for research and development. Topics such as sustainability, recycling and mass customisation will be of even greater importance in the future. In this context, the variety of the used materials, structures and technologies and their applications have to meet certain requirements.
A successful interaction of research institutes and companies in competition require strong cooperation, solution oriented strategies and marketable applications. This can be achieved by interdisciplinary thinking and acting, knowledge transfer and the networking of numerous actors in the fields of material and natural sciences, production technology, micro electronics, system integration, construction, calculation, simulation and quality assurance.
The conference addresses experts from science and industry to share their knowledge and experience in the research and development of lightweight structures and their manufacturing technologies. The conference contributions are divided into the following key aspects:
Materials, semi-finished products and composite structures for lightweight design,
Processing, systems and application for mass production of lightweight structures,
Modelling and simulation of hybrid structures and their production processes,
Smart systems integration.
A successful interaction of research institutes and companies in competition require strong cooperation, solution oriented strategies and marketable applications. This can be achieved by interdisciplinary thinking and acting, knowledge transfer and the networking of numerous actors in the fields of material and natural sciences, production technology, micro electronics, system integration, construction, calculation, simulation and quality assurance.
The conference addresses experts from science and industry to share their knowledge and experience in the research and development of lightweight structures and their manufacturing technologies. The conference contributions are divided into the following key aspects:
Materials, semi-finished products and composite structures for lightweight design,
Processing, systems and application for mass production of lightweight structures,
Modelling and simulation of hybrid structures and their production processes,
Smart systems integration.
More details
Content
SESSION 1 - Materials, Semi-Finished Products and Composite Structures for Lightweight Design
Laser beam melting of complexly curved honeycomb structures
G. Schlick, M. Binder, M. Illgner
Comparison of manufacturing fiber metal laminates based on thermoplastic and thermosetting material - analyses of mechanical properties and economic effects
M. Trautmann, C. Symmank, A. Schmidt, D. Nestler, L. Kroll, U. Götze, G. Wagner
Manufacturing of lightweight parts by sandwich injection molding of metal-replacement plastics combined with light foams
A. Hüttl, N. Pönisch, P. Bloß
Cold surface treatments on fiber-reinforced plastics by pulsed laser
J. Gebauer, V. Franke, U. Klotzbach, E. Beyer
Influence of the cooling behaviour on the mechanical properties of hybrid laminates with carbon fibre-reinforced plastics
C. Zopp, D. Nestler, N. Buschner, C. Mende, J. Tröltzsch, S. Nendel, W. Nendel, L. Kroll
Adhesive bonding of CFRP-steel lightweight constructions for car body mass production
R. Dietrich, H. Körber, K. Drechsler
Investigation of bio-based polyamide with short fibers for lightweight structures
R. Rinberg, T. Hartmann, A. Nikiforov, A. Doynikov, S. Volfson, L. Kroll
Microstructuring of joining areas in aluminum alloy sheets by jet electro-chemical machining
R. Schimmelpfennig, M. Hackert-Oschätzchen, A. Martin, A. Schubert
Natural fibre reinforced biocomposites - Innovative and optimized processes for series production
A.-A. Ouali, R. Rinberg, W. Nendel, L. Kroll, A. Todorov, H. Cebulla
Impregnability and performance of rCF-nonwovens with epoxy resin
J. Mankiewicz, E. Cleve, M. Heber, J.-S. Gutmann
Mikrosandwich - lightweight for the automotive interior
C. Menzel, B. Stamp, H. Bieder, T. Blumenstock
Tailored fiber placement in thermoplastic composites
A. Spickenheuer, C. Scheffler, L. Bittrich, R. Haase, D. Garray, G. Heinrich
Automated orbital winding of fiber reinforced structural components
R. Wallasch, R. Tirschmann, C. Teichgraeber, T. Ruder, K. Zierold, M. Spieler, W. Nendel, L. Kroll, Ch. Cherif, M. Berger
Prefinished metal polymer hybrid parts
I. Kühnert, M. Gedan-Smolka, M. Fischer, P. Scholz, D. Landgrebe
Optimisation of fibre reinforced plastics by using the life cycle engineering methodology
J. Kaufmann, I. Ribero, P. Peca, U. Goetze, H. Cebulla
SESSION 2 - Processing, Systems and Application for Mass Production of Lightweight Structures
Lightweight piston design in hand-held power tools
C. Karrar, S. Meuser, A. Wolf
FAUSST - bridging the gap between steel and fibre reinforced materials
R. Luterbacher, L. Molter
Multifunctional FRP-aluminum foam setup for battery housings of electric vehicles
R. Schmerler, T. Gebken, C. Lies, M. Kühn, W.-G. Drossel, K. Dröder
Investigation of integral endless fibre reinforced aluminium-polyamide 6 hybrid joints
R. Van der Auwera, T. Gebken, M. Kühn, F.-J. Wöstmann, K. Dröder, M. Busse
Multi-material design for physiologically optimised lightweight car seat
S. Ren, K. Schäfer, D. Nestler, D. Krumm, S. Odenwald, L. Kroll
The most filigree structure made by remote laser cutting
R. Baumann, P. Herwig, E. Beyer
Evaluation of process chains for manufacturing hybrid structures in early design stages - a source of impulses to R&D activities
J. Boll, A. Graf, L. Markov, A. Rautenstrauch, C. Symmank, A. Schmidt, B. Awiszus, U. Götze, V. Kräusel, D. Landgrebe
Advanced joining technology for the production of highly stressable lightweight structures, with fiber-reinforced plastics and metal
H. Seidlitz, F. Kuke, N. Tsombanis
Product-oriented turn-key solutions for fiber-reinforced thermoplastic components
M. Cetin, S. Fenske
Smart process combination for aluminium/plastic hybrid components
A. Albert, W. Zorn, M. Layer, W.-G. Drossel, D. Landgrebe, L. Kroll, W. Nendel
High-performance machining of fiber-reinforced materials with hybrid ultrasonic-assisted cutting
A. Stoll, C. Rüger, K. Busch, T. Mäder, B. Kranz
Automated composite production - in-situ processing of (epsilon) caprolactam and structures made of thermoplastic tapes
N. Müller, L. Reith, P. Zwicklhuber
Life cycle engineering and management methods for designing hybrid structures - cases, potentials and challenges
U. Götze, C. Symmank, A. Schmidt
New additive manufacturing technology for fiber reinforced plastics in skeleton structure
M. Holzinger, J. Blase, L. Kroll
Additive manufactured structures with improved properties for tissue engineering
A. Lanzotti, M. Martorelli, A. Gloria
SESSION 3 - Modelling and Simulation of Hybrid Structures and their Production Processes
Modelling damage and failure in composite materials with probabilistic approach
V. V. Astanin, G. O. Shchegel
Modelling the deformation of continuous fibre-reinforced thermoplastics subjected to hygrothermal loading
T. Grätzl, M. Hille, N. Schramm, L. Kroll
Methodological approach to investigate the behavior of the structure under dynamic loading using multiple criteria decision making method
J. Oleksik, S. Natarajan, T. Vietor
Integrating models for fiber reinforced materials into finite element simulations
R. Dietze, N. Goldberg, R. Herzog, M. Hofmann, J. Ihlemann, A. Meyer, F. Ospald, G. Rünger, R. Springer
Residual stress analysis of fibre-reinforced structures with fibre BRAGG grating sensors
E. Peretzki, N. Schramm, S. Hannusch, J. Ihlemann, L. Kroll
Lightweight car door made out of a net shape and load adapted hybrid fabric
M. Fleischmann, L. Bratge, A. Spickenheuer, L. Bittrich, J. Kaufmann, C. Ehemann, H. Cebulla
SESSION 4 - Smart Systems Integration
Technologies for the integration of miniaturized silicon sensor systems in fiber reinforced composites
B. Arnold, R. Decker, F. Rost, A. Bauer, J. Mehner, L. Kroll, S. Rzepka, T. Otto
Development of activated carbon web for effective EMI shielding applications
V. Baheti, J. Militky, S. Naaem, V. Tunakova, B. Tomkova
Design and economic evaluation of synthetic jet actuators for the integration in heterogeneous composite structures
M. Schüller, M. Walther, M. Lipowski, C. Symmank, A. Schmidt, T. Otto, U. Götze, L. Kroll
Investigation on inkjet printing for electromagnetic compatibility application
M. Hartwig, M. Polomoshnov, R. Zichner, R. R. Baumann
Mass production enabled manufacturing and measurement technologies for hybrid laminates with sensory function
V. Kräusel, A. Graf, R. Decker, F. Ullmann, M. Heinrich, D. Landgrebe, L. Kroll, W. Hardt
Integrated platform for advanced smart textile applications
H. Illing-Guenther, F. Weigand, R. Helbig, F. Ebert
Additive manufacturing of capacitive humidity sensors by screen printing for condition monitoring of FRP composites
T. Seifert, J. Martin, M. Wiemer, T. Otto
Material-integrated composite humidity sensors for condition monitoring of fiber-reinforced plastics
J. Martin, K. Shetty, N. Reimann, S. Neukirchner, U. Fügmann, D. Nestler, A. C. Hübler, T. Otto, L. Kroll
Enhance lightweight design by composites - results of the EU project ENLIGHT
D. Mayer, T. Bein
Hybrid hierarchical composite material based on carbon nanostructures
E. Y. Matsubara, J. M. Rosolen
Realization of sensitive functionality by integration of electromagnetic resonators in composite materials
T. D. Großmann, M. Hartwig, M. Heinrich, R. Decker, C. Symmank, A. Schmidt, S. Kurth, U. Götze, R. R. Baumann, L. Kroll, T. Otto
Development and characterization of highly sensitive thin film strain sensors consisting of nickel-carbon composite for integration in thermoplastic-based hybrid laminates
C. Karapepas, D. Nestler, D. Wett, G. Wagner
Poster Contributions
Regenerated cellulose fiber reinforced unidirectional (UD) tapes for directed lightweight construction in automotive applications
S. Meyer, A. Rapthel, I. Rapthel, R. Kaufmann, J. Horn, P. Hammer, I. Jahn
Improvement of fiber-matrix adhesion of glass fiber reinforced plastics using aqueous silane emulsions
K. Böttcher, I. Roth-Panke, L. Kroll
Go beyond 4.0
A. Willert, R. Zichner, R. R. Baumann, T. Otto
Novel coupling agents based on functional thermoplastics for improvement of interfacial properties between metal and plastic
N. Buschner, I. Roth-Panke, L. Kroll
Assessment of novel adhesion promoting agents suitable for mass-production of metal-plastic composites by means of injection molding
C. Mende, S. Anders, M. Birkner, M. Göring, E. Saborowski, K. Schreiter, I. Roth-Panke, L. Kroll, S. Spange, T. Lampke
Development and integration of film-based sensors for load detection in lightweight structures
M. Moebius, J. Martin, T. Otto
Comfort evaluation of seat cushions
D. Krumm, S. Schwanitz, D. Nestler, S. Odenwald
Bio-based elements for complex shaped structures
C. Siegel, B. Buchelt, A. Wagenführ, R. Rinberg, L. Kroll, H. Cebulla
Silver(I) carboxylates as precursors for joining of copper at low temperatures
P. Frenzel, S. Hausner, G. Wagner, H. Lang
Silver(I) precursors - workhorses for joining and printing processes
J. Noll, S. Hausner, M. Hartwig, K. Shetty, U. Fügmann, G. Wagner, R. R. Baumann, A. C. Hübler, H. Lang
Improved adhesion in natural fiber composites by using maleic anhydride copolymers
R. John, K. Trommler, K. Schreiter, C. Siegel, A. Wagenführ, S. Spange
Digitalization of the textile value chain for fiber reinforced plastic parts
J. Kaufmann, M. Kohlmüller, C. Ehemann, M. Fleischmann, H. Cebulla
Mechanical and rheological behavior of short fiber reinforced high melt strength polypropylene for film extrusion
N. Loypetch, J. Tröltzsch, K. Hase, I. Roth-Panke, L. Kroll
Large-scale production of thermoplastic, fiber reinforced sandwich structures
T. Gläßer, M. Zschyge
Development of electrically conductive activated carbon fabric from kevlar fabric for effective emi shielding applications
D. Karthik, V. Baheti, V. Tunakova, J. Militky, S. Palanisamy
A study on electrical conductivity ageing behaviour of polypyrrole coated glass fabric
S. Palanisamy, V. Tunakova, D. Karthik, V. Baheti, A. Ali, J. Militky
Mechanisms of action for the integration of metal FVK hybrids with novel properties
F. Riedel, D. Landgrebe, G. Töberling, D. Mattheß, T. Lampke, Th. Lindner
Thin hard foam sheets for future lightweight applications
D. Foglia, M. Pichler, M. Weber
Structure and physical properties of injection molded microcellular polyamide (PA) / glass fiber composite
D. Sykutera, M. Grabowski, P. Szewczykowski,
Tribological properties of additive manufactured polymers for lightweight structures
M. Frankiewicz, M. Olejarczyk, P. Gruber
Usage of hybrid magnesium-carbon fibres as reinforcement in biodegradable composites
P. Deptula, Z. Oksiuta, P. Mrozek, J. R. Dabrowski, Cywinski
Interface design of hybrid laminates
K. Jahn, A. Kolonko, N. Buschner, M. Scholze, D. Nestler, I. Roth-Panke, T. Lampke, L. Kroll, J. Tröltzsch
Integration of LEDs based on quantum dots within lightweight structures
J. Langenickel, M. Meyer, A. Weiß, T. Otto
Multifunctional multiaxial thermoplastic preforms based tapes for large scale production
T. Ruder, K. Zierold, Ch. Dedow, S. Rittner, Ch. Cherif
Crash-absorber for automotive use based on a hybrid metal-wire reinforced plastic
C. Ehemann, J. Kaufmann, J. Emmrich, M. Fleischmann, H. Cebulla
Physiologically optimised lightweight car seat in Multi-Material Design
S. Ren, K. Schäfer, T. Timmel, D. Nestler, S. Schwanitz, S. Odenwald
Improved blade element momentum theory (BEMT) for prediction of the aerodynamic performances of horizontal axis wind turbine blade (HAWT)
Y. El khchine, M. Sriti
Consideration of complex stress state when determining strength at three- and four-point-bending
K. Lagoda, A. Kurek, T. Osiecki, S. Mueller, L. Kroll, T. Lagoda
Enka® TecTape - a ready to use hybrid roving with unidirectional glass and thermoplastic fibers
S. Volta, A. Flachenecker, C. Vieth
Injection moulded multistructural parts with 3D printed cores
P. Czyzewski, D. Marciniak, P. P. Szewczykowski, D. Sykutera, M. Bieliski
Application of grinded cork as a filler of polypropylene
P. Szewczykowski, A. Ko ciuszko, . Wajer, A. Ociak, M. Pinkowski, M. Wawrzyniak
Laser beam melting of complexly curved honeycomb structures
G. Schlick, M. Binder, M. Illgner
Comparison of manufacturing fiber metal laminates based on thermoplastic and thermosetting material - analyses of mechanical properties and economic effects
M. Trautmann, C. Symmank, A. Schmidt, D. Nestler, L. Kroll, U. Götze, G. Wagner
Manufacturing of lightweight parts by sandwich injection molding of metal-replacement plastics combined with light foams
A. Hüttl, N. Pönisch, P. Bloß
Cold surface treatments on fiber-reinforced plastics by pulsed laser
J. Gebauer, V. Franke, U. Klotzbach, E. Beyer
Influence of the cooling behaviour on the mechanical properties of hybrid laminates with carbon fibre-reinforced plastics
C. Zopp, D. Nestler, N. Buschner, C. Mende, J. Tröltzsch, S. Nendel, W. Nendel, L. Kroll
Adhesive bonding of CFRP-steel lightweight constructions for car body mass production
R. Dietrich, H. Körber, K. Drechsler
Investigation of bio-based polyamide with short fibers for lightweight structures
R. Rinberg, T. Hartmann, A. Nikiforov, A. Doynikov, S. Volfson, L. Kroll
Microstructuring of joining areas in aluminum alloy sheets by jet electro-chemical machining
R. Schimmelpfennig, M. Hackert-Oschätzchen, A. Martin, A. Schubert
Natural fibre reinforced biocomposites - Innovative and optimized processes for series production
A.-A. Ouali, R. Rinberg, W. Nendel, L. Kroll, A. Todorov, H. Cebulla
Impregnability and performance of rCF-nonwovens with epoxy resin
J. Mankiewicz, E. Cleve, M. Heber, J.-S. Gutmann
Mikrosandwich - lightweight for the automotive interior
C. Menzel, B. Stamp, H. Bieder, T. Blumenstock
Tailored fiber placement in thermoplastic composites
A. Spickenheuer, C. Scheffler, L. Bittrich, R. Haase, D. Garray, G. Heinrich
Automated orbital winding of fiber reinforced structural components
R. Wallasch, R. Tirschmann, C. Teichgraeber, T. Ruder, K. Zierold, M. Spieler, W. Nendel, L. Kroll, Ch. Cherif, M. Berger
Prefinished metal polymer hybrid parts
I. Kühnert, M. Gedan-Smolka, M. Fischer, P. Scholz, D. Landgrebe
Optimisation of fibre reinforced plastics by using the life cycle engineering methodology
J. Kaufmann, I. Ribero, P. Peca, U. Goetze, H. Cebulla
SESSION 2 - Processing, Systems and Application for Mass Production of Lightweight Structures
Lightweight piston design in hand-held power tools
C. Karrar, S. Meuser, A. Wolf
FAUSST - bridging the gap between steel and fibre reinforced materials
R. Luterbacher, L. Molter
Multifunctional FRP-aluminum foam setup for battery housings of electric vehicles
R. Schmerler, T. Gebken, C. Lies, M. Kühn, W.-G. Drossel, K. Dröder
Investigation of integral endless fibre reinforced aluminium-polyamide 6 hybrid joints
R. Van der Auwera, T. Gebken, M. Kühn, F.-J. Wöstmann, K. Dröder, M. Busse
Multi-material design for physiologically optimised lightweight car seat
S. Ren, K. Schäfer, D. Nestler, D. Krumm, S. Odenwald, L. Kroll
The most filigree structure made by remote laser cutting
R. Baumann, P. Herwig, E. Beyer
Evaluation of process chains for manufacturing hybrid structures in early design stages - a source of impulses to R&D activities
J. Boll, A. Graf, L. Markov, A. Rautenstrauch, C. Symmank, A. Schmidt, B. Awiszus, U. Götze, V. Kräusel, D. Landgrebe
Advanced joining technology for the production of highly stressable lightweight structures, with fiber-reinforced plastics and metal
H. Seidlitz, F. Kuke, N. Tsombanis
Product-oriented turn-key solutions for fiber-reinforced thermoplastic components
M. Cetin, S. Fenske
Smart process combination for aluminium/plastic hybrid components
A. Albert, W. Zorn, M. Layer, W.-G. Drossel, D. Landgrebe, L. Kroll, W. Nendel
High-performance machining of fiber-reinforced materials with hybrid ultrasonic-assisted cutting
A. Stoll, C. Rüger, K. Busch, T. Mäder, B. Kranz
Automated composite production - in-situ processing of (epsilon) caprolactam and structures made of thermoplastic tapes
N. Müller, L. Reith, P. Zwicklhuber
Life cycle engineering and management methods for designing hybrid structures - cases, potentials and challenges
U. Götze, C. Symmank, A. Schmidt
New additive manufacturing technology for fiber reinforced plastics in skeleton structure
M. Holzinger, J. Blase, L. Kroll
Additive manufactured structures with improved properties for tissue engineering
A. Lanzotti, M. Martorelli, A. Gloria
SESSION 3 - Modelling and Simulation of Hybrid Structures and their Production Processes
Modelling damage and failure in composite materials with probabilistic approach
V. V. Astanin, G. O. Shchegel
Modelling the deformation of continuous fibre-reinforced thermoplastics subjected to hygrothermal loading
T. Grätzl, M. Hille, N. Schramm, L. Kroll
Methodological approach to investigate the behavior of the structure under dynamic loading using multiple criteria decision making method
J. Oleksik, S. Natarajan, T. Vietor
Integrating models for fiber reinforced materials into finite element simulations
R. Dietze, N. Goldberg, R. Herzog, M. Hofmann, J. Ihlemann, A. Meyer, F. Ospald, G. Rünger, R. Springer
Residual stress analysis of fibre-reinforced structures with fibre BRAGG grating sensors
E. Peretzki, N. Schramm, S. Hannusch, J. Ihlemann, L. Kroll
Lightweight car door made out of a net shape and load adapted hybrid fabric
M. Fleischmann, L. Bratge, A. Spickenheuer, L. Bittrich, J. Kaufmann, C. Ehemann, H. Cebulla
SESSION 4 - Smart Systems Integration
Technologies for the integration of miniaturized silicon sensor systems in fiber reinforced composites
B. Arnold, R. Decker, F. Rost, A. Bauer, J. Mehner, L. Kroll, S. Rzepka, T. Otto
Development of activated carbon web for effective EMI shielding applications
V. Baheti, J. Militky, S. Naaem, V. Tunakova, B. Tomkova
Design and economic evaluation of synthetic jet actuators for the integration in heterogeneous composite structures
M. Schüller, M. Walther, M. Lipowski, C. Symmank, A. Schmidt, T. Otto, U. Götze, L. Kroll
Investigation on inkjet printing for electromagnetic compatibility application
M. Hartwig, M. Polomoshnov, R. Zichner, R. R. Baumann
Mass production enabled manufacturing and measurement technologies for hybrid laminates with sensory function
V. Kräusel, A. Graf, R. Decker, F. Ullmann, M. Heinrich, D. Landgrebe, L. Kroll, W. Hardt
Integrated platform for advanced smart textile applications
H. Illing-Guenther, F. Weigand, R. Helbig, F. Ebert
Additive manufacturing of capacitive humidity sensors by screen printing for condition monitoring of FRP composites
T. Seifert, J. Martin, M. Wiemer, T. Otto
Material-integrated composite humidity sensors for condition monitoring of fiber-reinforced plastics
J. Martin, K. Shetty, N. Reimann, S. Neukirchner, U. Fügmann, D. Nestler, A. C. Hübler, T. Otto, L. Kroll
Enhance lightweight design by composites - results of the EU project ENLIGHT
D. Mayer, T. Bein
Hybrid hierarchical composite material based on carbon nanostructures
E. Y. Matsubara, J. M. Rosolen
Realization of sensitive functionality by integration of electromagnetic resonators in composite materials
T. D. Großmann, M. Hartwig, M. Heinrich, R. Decker, C. Symmank, A. Schmidt, S. Kurth, U. Götze, R. R. Baumann, L. Kroll, T. Otto
Development and characterization of highly sensitive thin film strain sensors consisting of nickel-carbon composite for integration in thermoplastic-based hybrid laminates
C. Karapepas, D. Nestler, D. Wett, G. Wagner
Poster Contributions
Regenerated cellulose fiber reinforced unidirectional (UD) tapes for directed lightweight construction in automotive applications
S. Meyer, A. Rapthel, I. Rapthel, R. Kaufmann, J. Horn, P. Hammer, I. Jahn
Improvement of fiber-matrix adhesion of glass fiber reinforced plastics using aqueous silane emulsions
K. Böttcher, I. Roth-Panke, L. Kroll
Go beyond 4.0
A. Willert, R. Zichner, R. R. Baumann, T. Otto
Novel coupling agents based on functional thermoplastics for improvement of interfacial properties between metal and plastic
N. Buschner, I. Roth-Panke, L. Kroll
Assessment of novel adhesion promoting agents suitable for mass-production of metal-plastic composites by means of injection molding
C. Mende, S. Anders, M. Birkner, M. Göring, E. Saborowski, K. Schreiter, I. Roth-Panke, L. Kroll, S. Spange, T. Lampke
Development and integration of film-based sensors for load detection in lightweight structures
M. Moebius, J. Martin, T. Otto
Comfort evaluation of seat cushions
D. Krumm, S. Schwanitz, D. Nestler, S. Odenwald
Bio-based elements for complex shaped structures
C. Siegel, B. Buchelt, A. Wagenführ, R. Rinberg, L. Kroll, H. Cebulla
Silver(I) carboxylates as precursors for joining of copper at low temperatures
P. Frenzel, S. Hausner, G. Wagner, H. Lang
Silver(I) precursors - workhorses for joining and printing processes
J. Noll, S. Hausner, M. Hartwig, K. Shetty, U. Fügmann, G. Wagner, R. R. Baumann, A. C. Hübler, H. Lang
Improved adhesion in natural fiber composites by using maleic anhydride copolymers
R. John, K. Trommler, K. Schreiter, C. Siegel, A. Wagenführ, S. Spange
Digitalization of the textile value chain for fiber reinforced plastic parts
J. Kaufmann, M. Kohlmüller, C. Ehemann, M. Fleischmann, H. Cebulla
Mechanical and rheological behavior of short fiber reinforced high melt strength polypropylene for film extrusion
N. Loypetch, J. Tröltzsch, K. Hase, I. Roth-Panke, L. Kroll
Large-scale production of thermoplastic, fiber reinforced sandwich structures
T. Gläßer, M. Zschyge
Development of electrically conductive activated carbon fabric from kevlar fabric for effective emi shielding applications
D. Karthik, V. Baheti, V. Tunakova, J. Militky, S. Palanisamy
A study on electrical conductivity ageing behaviour of polypyrrole coated glass fabric
S. Palanisamy, V. Tunakova, D. Karthik, V. Baheti, A. Ali, J. Militky
Mechanisms of action for the integration of metal FVK hybrids with novel properties
F. Riedel, D. Landgrebe, G. Töberling, D. Mattheß, T. Lampke, Th. Lindner
Thin hard foam sheets for future lightweight applications
D. Foglia, M. Pichler, M. Weber
Structure and physical properties of injection molded microcellular polyamide (PA) / glass fiber composite
D. Sykutera, M. Grabowski, P. Szewczykowski,
Tribological properties of additive manufactured polymers for lightweight structures
M. Frankiewicz, M. Olejarczyk, P. Gruber
Usage of hybrid magnesium-carbon fibres as reinforcement in biodegradable composites
P. Deptula, Z. Oksiuta, P. Mrozek, J. R. Dabrowski, Cywinski
Interface design of hybrid laminates
K. Jahn, A. Kolonko, N. Buschner, M. Scholze, D. Nestler, I. Roth-Panke, T. Lampke, L. Kroll, J. Tröltzsch
Integration of LEDs based on quantum dots within lightweight structures
J. Langenickel, M. Meyer, A. Weiß, T. Otto
Multifunctional multiaxial thermoplastic preforms based tapes for large scale production
T. Ruder, K. Zierold, Ch. Dedow, S. Rittner, Ch. Cherif
Crash-absorber for automotive use based on a hybrid metal-wire reinforced plastic
C. Ehemann, J. Kaufmann, J. Emmrich, M. Fleischmann, H. Cebulla
Physiologically optimised lightweight car seat in Multi-Material Design
S. Ren, K. Schäfer, T. Timmel, D. Nestler, S. Schwanitz, S. Odenwald
Improved blade element momentum theory (BEMT) for prediction of the aerodynamic performances of horizontal axis wind turbine blade (HAWT)
Y. El khchine, M. Sriti
Consideration of complex stress state when determining strength at three- and four-point-bending
K. Lagoda, A. Kurek, T. Osiecki, S. Mueller, L. Kroll, T. Lagoda
Enka® TecTape - a ready to use hybrid roving with unidirectional glass and thermoplastic fibers
S. Volta, A. Flachenecker, C. Vieth
Injection moulded multistructural parts with 3D printed cores
P. Czyzewski, D. Marciniak, P. P. Szewczykowski, D. Sykutera, M. Bieliski
Application of grinded cork as a filler of polypropylene
P. Szewczykowski, A. Ko ciuszko, . Wajer, A. Ociak, M. Pinkowski, M. Wawrzyniak