Waste to Energy Conversion Technology
Published on 30. October 2018
Book
Paperback/Softback
256 pages
978-0-08-101529-2 (ISBN)
Description
Increasing global consumerism and population has led to an increase in the levels of waste produced. Waste to energy (WTE) conversion technologies can be employed to convert residual wastes into clean energy, rather than sending these wastes directly to landfill. Waste to energy conversion technology explores the systems, technology and impacts of waste to energy conversion.Part one provides an introduction to WTE conversion and reviews the waste hierarchy and WTE systems options along with the corresponding environmental, regulatory and techno-economic issues facing this technology. Part two goes on to explore further specific aspects of WTE systems, engineering and technology and includes chapters on municipal solid waste (MSW) combustion plants and WTE systems for district heating. Finally, part three highlights pollution control systems for waste to energy technologies.Waste to energy conversion technology is a standard reference book for plant managers, building engineers and consultants requiring an understanding of WTE technologies, and researchers, scientists and academics interested in the field.
More details
Series
Language
English
Place of publication
Cambridge
United Kingdom
Publishing group
Elsevier Science & Technology
Target group
Professional and scholarly
Dimensions
Height: 234 mm
Width: 156 mm
ISBN-13
978-0-08-101529-2 (9780081015292)
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Naomi B. Klinghoffer | Marco J. Castaldi
Waste to Energy Conversion Technology
Book
05/2013
Woodhead Publishing Ltd
€205.01
Shipment within 10-15 days
Persons
Naomi B. Klinghoffer is currently a PhD student at Columbia University, USA under the direction of Professor Castaldi. Ms Klinghoffer has presented her work at national and international conferences on all aspects of waste valorization. Professor Marco J. Castaldi is Associate Professor of Chemical Engineering at City University of New York, City College (CCNY), USA. Professor Castaldi is active in the Materials and Energy Recovery Division of ASME and the Research and New Technology Council of AIChE; he has been involved in research and development in waste to energy and gasification technology for the last decade.
Content
Contributor contact details
Woodhead Publishing Series in Energy
Foreword
Part I: Introduction to waste to energy conversion
Chapter 1: Waste to energy (WTE): an introduction
Abstract:
1.1 Energy supply and waste management
1.2 Biogenic fraction of carbon and calorific value of municipal solid waste (MSW)
1.3 Thermal treatment of municipal solid waste (MSW)
1.4 Recycling and WTE
1.5 Contents of this book
Chapter 2: Environmental and social impacts of waste to energy (WTE) conversion plants
Abstract:
2.1 Introduction
2.2 Contributions of WTE conversion to waste reduction and energy generation
2.3 Air quality and residue management considerations of WTE conversion
2.4 Greenhouse gas profile of WTE
2.5 Compatibility of WTE with recycling
2.6 Health and safety aspects of WTE
2.7 Integrated planning for WTE plants
2.8 Future trends
Chapter 3: Lifecycle assessment (LCA) and its application to sustainable waste management
Abstract:
3.1 Introduction
3.2 Energetic comparison of waste to energy (WTE) systems and alternative waste options
3.3 Emissions comparison of WTE systems and alternative waste options
3.4 Advantages and limitations of using an LCA approach to evaluate waste management systems
3.5 An alternative metric to evaluate waste management systems that addresses goal-oriented needs
3.6 Sources of further information
Chapter 4: Feedstocks for waste to energy (WTE) systems: types, properties and analysis
Abstract:
4.1 Introduction
4.2 Types of feedstock for WTE systems and their characteristics
4.3 Testing of feedstocks for WTE systems
Part II: Waste to energy systems, engineering and technology
Chapter 5: Pre-processing and treatment of municipal solid waste (MSW) prior to incineration
Abstract:
5.1 Introduction
5.2 Basic screening processes: mass burn
5.3 Fuel upgrading and enhancement processes
5.4 Advanced screening, separation and processing
5.5 Shredding and size reduction processes
5.6 Conclusion
Chapter 6: Municipal solid waste (MSW) combustion plants
Abstract:
6.1 Introduction
6.2 Principles of combustion
6.3 Mass burn waterwall combustion systems
6.4 Refuse-derived fuel (RDF) combustion systems
6.5 Modular combustion systems
6.6 Advantages and limitations
6.7 New developments
6.8 Sources of further information
Chapter 7: Waste firing in large combustion plants
Abstract:
7.1 Introduction
7.2 Pulverised-coal (PC) units with direct co-firing
7.3 Direct fluidised-bed combustion
7.4 Co-combustion of gasification gas in a pulverised-coal boiler
7.5 Retrofitting a pulverised-coal plant with fluidised-bed units
7.6 Controlling high-temperature corrosion in co-fired units
7.7 Conclusion
Chapter 8: Waste to energy (WTE) systems for district heating
Abstract:
8.1 Introduction
8.2 Waste boilers
8.3 Electricity production in waste to energy (WTE) facilities
8.4 WTE facilities as sources of heat
8.5 Optimizing energy efficiency in WTE combined heat and power (CHP) facilities
8.6 Conclusion
Chapter 9: Gasification and pyrolysis of municipal solid waste (MSW)
Abstract:
9.1 Introduction
9.2 Gasification and pyrolysis
9.3 Products and their applications
9.4 Process analysis and reactor design
9.5 Process modifications for gasification systems
9.6 Environmental effect of gasification
9.7 Technologies in operation
9.8 Conclusion
Part III: Pollution control systems for waste to energy technologies
Chapter 10: Transformation of waste combustion facilities from major polluters to pollution sinks
Abstract:
10.1 Introduction
10.2 Status of waste combustion before 1970
10.3 Air emission regulations and their influence upon technology
10.4 Dioxin emissions
10.5 Environmental impact of emissions from modern waste combustion plants
10.6 Conclusion
Chapter 11: Air quality equipment and systems for waste to energy (WTE) conversion plants
Abstract:
11.1 Air quality considerations and regulations for municipal waste combustors
11.2 Acid gas scrubbing in municipal waste combustors
11.3 Particulate control devices utilized at waste combustion facilities
11.4 Control of nitrogen oxide emissions and hazardous air pollutants from waste combustors
11.5 Air pollution control cost-benefit analysis
11.6 Air quality technology innovations for municipal waste combustors
Index
Woodhead Publishing Series in Energy
Foreword
Part I: Introduction to waste to energy conversion
Chapter 1: Waste to energy (WTE): an introduction
Abstract:
1.1 Energy supply and waste management
1.2 Biogenic fraction of carbon and calorific value of municipal solid waste (MSW)
1.3 Thermal treatment of municipal solid waste (MSW)
1.4 Recycling and WTE
1.5 Contents of this book
Chapter 2: Environmental and social impacts of waste to energy (WTE) conversion plants
Abstract:
2.1 Introduction
2.2 Contributions of WTE conversion to waste reduction and energy generation
2.3 Air quality and residue management considerations of WTE conversion
2.4 Greenhouse gas profile of WTE
2.5 Compatibility of WTE with recycling
2.6 Health and safety aspects of WTE
2.7 Integrated planning for WTE plants
2.8 Future trends
Chapter 3: Lifecycle assessment (LCA) and its application to sustainable waste management
Abstract:
3.1 Introduction
3.2 Energetic comparison of waste to energy (WTE) systems and alternative waste options
3.3 Emissions comparison of WTE systems and alternative waste options
3.4 Advantages and limitations of using an LCA approach to evaluate waste management systems
3.5 An alternative metric to evaluate waste management systems that addresses goal-oriented needs
3.6 Sources of further information
Chapter 4: Feedstocks for waste to energy (WTE) systems: types, properties and analysis
Abstract:
4.1 Introduction
4.2 Types of feedstock for WTE systems and their characteristics
4.3 Testing of feedstocks for WTE systems
Part II: Waste to energy systems, engineering and technology
Chapter 5: Pre-processing and treatment of municipal solid waste (MSW) prior to incineration
Abstract:
5.1 Introduction
5.2 Basic screening processes: mass burn
5.3 Fuel upgrading and enhancement processes
5.4 Advanced screening, separation and processing
5.5 Shredding and size reduction processes
5.6 Conclusion
Chapter 6: Municipal solid waste (MSW) combustion plants
Abstract:
6.1 Introduction
6.2 Principles of combustion
6.3 Mass burn waterwall combustion systems
6.4 Refuse-derived fuel (RDF) combustion systems
6.5 Modular combustion systems
6.6 Advantages and limitations
6.7 New developments
6.8 Sources of further information
Chapter 7: Waste firing in large combustion plants
Abstract:
7.1 Introduction
7.2 Pulverised-coal (PC) units with direct co-firing
7.3 Direct fluidised-bed combustion
7.4 Co-combustion of gasification gas in a pulverised-coal boiler
7.5 Retrofitting a pulverised-coal plant with fluidised-bed units
7.6 Controlling high-temperature corrosion in co-fired units
7.7 Conclusion
Chapter 8: Waste to energy (WTE) systems for district heating
Abstract:
8.1 Introduction
8.2 Waste boilers
8.3 Electricity production in waste to energy (WTE) facilities
8.4 WTE facilities as sources of heat
8.5 Optimizing energy efficiency in WTE combined heat and power (CHP) facilities
8.6 Conclusion
Chapter 9: Gasification and pyrolysis of municipal solid waste (MSW)
Abstract:
9.1 Introduction
9.2 Gasification and pyrolysis
9.3 Products and their applications
9.4 Process analysis and reactor design
9.5 Process modifications for gasification systems
9.6 Environmental effect of gasification
9.7 Technologies in operation
9.8 Conclusion
Part III: Pollution control systems for waste to energy technologies
Chapter 10: Transformation of waste combustion facilities from major polluters to pollution sinks
Abstract:
10.1 Introduction
10.2 Status of waste combustion before 1970
10.3 Air emission regulations and their influence upon technology
10.4 Dioxin emissions
10.5 Environmental impact of emissions from modern waste combustion plants
10.6 Conclusion
Chapter 11: Air quality equipment and systems for waste to energy (WTE) conversion plants
Abstract:
11.1 Air quality considerations and regulations for municipal waste combustors
11.2 Acid gas scrubbing in municipal waste combustors
11.3 Particulate control devices utilized at waste combustion facilities
11.4 Control of nitrogen oxide emissions and hazardous air pollutants from waste combustors
11.5 Air pollution control cost-benefit analysis
11.6 Air quality technology innovations for municipal waste combustors
Index