Eco-Materials Processing & Design VII

<ul><li>Fabrication of Photocatalytic TiO₂ Thin Film Using Innovative Aerosol Deposition Method</li><li>Titanium Oxide-Based Photocatalysts: -From Fundamentals to Practical Applications-</li><li>Design of Efficient TiO₂/SiC Photocatalysts from TiC-SiC Nano Particles for Degradation of Organic Pollutants Diluted in Water</li><li>Bioactivity of Plasma-Sprayed TiO₂ Coating in Simulated Body Fluid by Hydrofluoric Acid Treatment</li><li>Nitride Formation on Titanium under Irradiation of Intense Pulsed Ion Beam</li><li>VOC Decomposition by Photocatalytic Wall Paper</li><li>Photo-Decomposition Property of Thermal Sprayed TiO₂ Coatings</li><li>Hydrogen Production by Catalytic Decomposition of Methane over Carbon Nanofibers</li><li>Photocatalytic Oxidation and Decomposition of Acetic Acid over TiO₂, TS-1 and Ti-MCM-41 Catalysts</li><li>Impact Evaluation to Human Body Skin of Titania Photocatalyst Fine Particles</li><li>A Novel Formulation for the Modification of Transition Metal Oxide Surfaces for Antifogging Optical Application</li><li>Dispersion Stability of TiO₂ Powder Synthesized by Homogeneous Precipitation Process at Low Temperatures</li><li>The Electrochemical Properties of Poly(acrylonitrile) Polymer Electrolyte for Li/S Battery</li><li>Correlation of Superhydrophilicity and Photocatalytic Activity in the TiO₂-Based Porous Thin Films</li><li>Photocatalytic Properties of Mesoporous TiO₂ Films Derived from Evaporation-Induced Self-Assembly Method</li><li>Influence of Deposition Parameters on Adhesion/Cohesion of Plasma Sprayed TiO₂ Coatings</li><li>A Comparison of Different Preparation Methods of Fe-Mo-Mg-O Catalyst for the Large-Scale Synthesis of Carbon Nanotubes</li><li>Photocatalytic Characterization of Plasma Sprayed TiO₂ Coating in Environmental Engineering Application</li><li>Microstructure Characterization on TiO₂ Based Anodes</li><li>Preparation and Antibacterial Activity of Silver Ions-Substituted Hydroxyapatite/Titania</li><li>Photocatalytic Decomposition of NO_x Using Ti-, V-, and Mo-MCM-41 Catalysts</li><li>Influence of Doping on the Antibacterial Effect of TiO₂ Nanoparticles</li><li>Raman Spectroscopic Investigation of Nitrogen-Doped Titanium Dioxide Nanoparticles</li><li>Characterization and Synthesis of Functional TiO₂ Sol-Gel Coatings on the Glass</li><li>Photo-Oxidation Decomposition of TiO₂ Photocatalyst for the Construction Materials</li><li>Preparation of Ternary Compound BaLi₂Ti₆O₁₄ by the Sol-Gel Process</li><li>Dependence of Yellow Phosphor on Optical and Electrical Properties of the White Light Emitting Diode Chip</li><li>Effect of Hydrothermal Conditions on the Cation Exchange Capacity of MSWI Fly Ash</li><li>Mechanical Properties of Nanocrystalline HVOF Coatings</li><li>Characterization of Li_1-xNi_1+xO₂ Prepared by Using Tartaric Acid as a Complexing Agent</li><li>Nd³⁺-Doped TiO₂ Nanoparticles Prepared by Sol-Hydrothermal Process</li><li>The Effect of Substrates on the Characteristics of Titania Nano-Coated Particles Prepared by Fluidized Bed Chemical Vapor Deposition (FBCVD)</li><li>Photocatalytic Properties of TiO₂ Coatings Prepared by Cold Spray Process</li><li>Effects of Constituents in Bio/Photocatalytic Hydrogen Production System Using Experimental Design Tool</li><li>Nanosized Titanium Oxynitride and Molybdenum Oxynitride Particles Assembled in Mesoporous Silica MCM-41</li><li>Simulation of Electric Upsetting and Forging Process for Large Marine Diesel Engine Exhaust Valves </li><li>Appearance of Indium Oxide Nanorods in MOCVD Growth</li><li>Compressive Deformation Behaviour of a Closed-Cell Aluminum</li><li>A Simple Reliable Method of Selecting Epoxy Molding Compounds for High Power Short Wavelength Light Emitting Diode Packages</li><li>Evaluating the Electrochemical Properties in the Protection Potential of Material for Use in Al Vessels in Seawater</li><li>A Slow Strain Rate Test Experiment to Evaluate the Characteristics of High-Strength Al-Mg Alloy for Application in Ships</li><li>Effects of Current Density on the Formation of Anodic Oxide Films on AZ91</li><li>CdSe/ZnS Quantum Dots Loaded Solid Lipid Nanoparticles: Novel Luminescent Nanocomposite Particles</li><li>Corrosion Behavior of Chromium Cast Iron and Steel in Hot Concentrated Alkaline</li><li>In-Situ Joining of Combustion Synthesized Ni-Al Alloys with Al Casting Alloy</li><li>Evaluation of Microstructure on SiC_p/AZ91 Magnesium Composite Fabricated by Rotation-Cylinder Method</li><li>Sliding Friction and Wear Properties of Composite Reinforced by Mullite</li><li>Enhancement of the Characteristics of the ALD HfO₂Film by Using the High-Pressure D₂ Annealing</li><li>Improvement of the Core Loss of SiFe by Optimizing the Operation Conditions of the Laser Scribing</li><li>Nanocrystalline Structure of Organic Photoconducting Materials Derived by Microwave Recrystallization Method</li><li>Microstructures and Wear Properties of Al Matrix Composites Fabricated by Two Different Processes</li><li>Dispersion Stability of Ni Nanoparticles in Ethanol with Poly (1-Vinyl-2-Pyrrolidone)</li><li>Effect of Heat Treatment on Microstructure, Tensile Properties and Damping Capacity of Mg-Zr Wrought Alloy</li><li>Microstructures and Mechanical Properties of Mg-Zn-RE-Ca Casting Alloys</li><li>Characteristics of Thin Film of Nano-Hybrid Synthesized from Acrylic Resin and Colloidal Silca-Silane Sol</li><li>Properties of Coating Films Synthesized from Nano Colloidal Silica and Alkoxy Silanes</li><li>Effect of Processing Parameters on the Fabrication of Al₂O_3p/Al Composites by In-Situ Reaction Process of Molten Al</li><li>Effects of Processing Parameters on the Mechanical Properties of SiC_p/AC8A Composites by Pressureless Metal Infiltration Process</li><li>Wear Characteristics of Particulate Reinforced Metal Matrix Composites Fabricated by a Pressureless Metal Infiltration Process</li><li>Modification of Mg₂Si Morphology in As-Cast Mg-Al-Si Alloys with Strontium and Antimony</li><li>Chipless Forming Process Using Rotary Swaging Machine with Four-Dies</li><li>Microstructure Analyses and FE Simulation of Automotive Product in the Hot Forging Process Using Aluminum Alloys</li><li>Castability, Tensile and Creep Properties of Mg-xAl-Zn with Variation of Al Content</li><li>Development of Manufacturing Process Using Cold Incremental Forming Technique for Micro-Alloyed Non-Heat-Treated Material</li><li>Development of Cube-Textured Ni and Ni-W Alloy Tapes by Focused Infrared Heating</li><li>Shape Memory Effect and Superelasticity of an Equiatomic Ti-Ni Alloy with Surface Sulfide Layers</li><li>Electrochemical and Structural Properties of Si/Ni/Cu Electrode Films Fabricated with Different Methods</li><li>Reciprocating Sliding Wear Behavior of Inconel 600 Mated with SUS 304 Stainless Steel at Elevated Temperatures</li><li>The Cavitation Behavior of Fe-Cr-C-Si-Ni Alloys</li><li>Effect of Tin on the Microstructures and Mechanical Properties of a Au-Pt-Cu Alloy</li><li>Effect of Indium on Bonding between Porcelain and Au-Pt-Cu Alloy</li><li>Fabrication and Magnetic Properties of Mullite Based Nanocomposites with Embedded FeCr Alloy Nanoparticles</li><li>Al-La-Ni-Fe Amorphous Alloys and Amorphous-Crystalline Composites Produced by Mechanical Alloying</li><li>Net-Shape Forming of TiAl Automotive Parts for Fuel Efficiency</li><li>Effect of Al on Microstructural and Mechanical Characteristics of Plasma Electrolytic Oxide Coatings on Magnesium</li><li>Effect of Impurity and Gas Nature on Microstructure of SiC Microtubes in Double Step Reaction Process</li><li>Modified Fabric and Its Electromagnetic Protection Characteristics</li><li>Interfacial Reaction between Molten Al Alloys and Titanium Matrix Composites</li><li>Preparation and Characterization of Chemical Activated Fibers on Various Carbon Fibers</li><li>Fabrication of Ni Sulfides by Thermal Sulfidation</li><li>Fabrication of Nickel-Silver Rods and Plate through a Small Cross Section Continuous Casting Process</li><li>Combinational Effects of Ni Precursors on Ni/YSZ Cermet Anode</li><li>Optimization of Sheet Metal Process Parameters of a Shield Case Piece Using Computer Simulation</li><li>Development of 2-Cavity Die Casting Process for AM50 Mg Steering Column Lock Housing Module</li><li>Synthesis Nanosized MgAl₂O₄ Spinel Powder with Excellent Sinterability</li><li>High Temperature Deformation Behavior of Pre-Sintered Al-10Si-5Fe Based Alloy</li><li>Mechanical Behavior of TiB₂ Nanoparticles Reinforced Cu Matrix Composites Synthesized by In-Situ Processing</li><li>Microstructures and Tensile Properties of Fe-40Al Intermetallic with High Boron Content</li><li>Fluidity of A356 Alloy during In-Ladle DTC Rheocasting</li><li>High Temperature Mechanical Properties of Ni-Al-Cr Based Alloys with Refractory Alloying Elements</li><li>Microstructural Control of 7075 Al Wrought Alloys through Thixoextrusion Route</li><li>Thermal and Phase Evolutions of As-Milled Powders Fabricated by Mechanical Alloying in the TiH₂-C System</li><li>H₂S/CO₂ Corrosion Behavior of Tubular Goods under High Temperature and High Pressure</li><li>Improved Heat and Corrosion Resistance of Mg-Al-Zn Alloys by Additions of Minor Alloying Elements</li><li>Characteristics of Spent Foundry Sand - Loess Mixture as Ceramic Support Materials</li><li>The Transfection Efficacy of Chitosan-DNA Nanoparticles on MGC803, SMMC-7721, MG63 Cells</li><li>Characteristic Evaluation of Extrusion Parameters on Direct Extrusion Process of 3003 Al Alloy Used for Automotive Condenser Tubing</li><li>Vacuum Diffusion Brazing of Al5052 Alloys Using Ag-28Cu Insert Metal</li><li>Morphological Evolution of Primary Solid Phase in Semi-Solid Slurry during the Isothermal Holding</li><li>Thermal Conductivity of Hot-Pressed BN Ceramics</li><li>Evaluation of Oxidation Behavior of the C-B₄C-SiC Composite through Continuous Measurement of Mass Change and Gas Concentration</li><li>Modeling for Optimum Thermal Property of Wave-Typed Heat Sink by Computational Simulation</li><li>High Temperature Oxidation of TiAl(La)N Coating Deposited on a Steel Substrate by Arc-Ion Plating</li><li>High Temperature Oxidation of WC-ZrN Superhard Nanocomposite Film</li><li>High Temperature Oxidation of Electroplated Cr-C Coating</li><li>Cyclic-Oxidation of Ti₃SiC₂ and Ti₃AlC₂ between 900 and 1200 degreesC in Air</li><li>Synthesis and Structural Investigation of Nano-Sized BaTiO₃ Powders</li><li>Analysis of Deformation Characteristics in Wave-Typed Heat Sink Composed of Fin and Base</li><li>Thermal Stability of 40Cr Steel with Surface Nanocrystallization</li><li>Recrystallization Behaviors and High Temperature Tensile Properties of Mg-Al-Sn-(Zn) Wrought Alloys</li><li>Improvement of Corrosion Resistance of Stainless Steel by ZrO₂-SiO₂ Sol-Gel Coatings</li><li>Fabrication of Nano-Sized Gold Dot Array Using Bi-Layer Nano Imprint Lithography</li><li>Microstructure Evolution with Solidification Rates in IN 738LC Superalloy</li><li>TGO Growth Behavior with Thermal Fatigue and Its Effect on Fracture Behavior of Thermal Barrier Coatings</li><li>Relationship between Microstructure and Tensile Strength in the Directionally Solidified (23-27) at. % Al-Ni Alloys</li><li>Sub-100nm Hybrid Stamp Fabrication by Hot Embossing</li><li>Characterization of Fe-Mo Alloyed Nanoparticles Synthesized by Chemical Vapor Condensation Process</li><li>Growth of CNTs on 304 Stainless Steel Using Sparked Iron as a Catalyst</li><li>Abnormal Grain Growth Mechanism in Alumina</li><li>Effect of MgF₂ Additive on the Mechanical Properties in Hydroxyapatite / Zirconia Composites</li><li>Estimation of Low Cycle Fatigue Life on the Accumulated Hysteresis Energy of ?????_p for Direct Aged Alloy 718 (Ni-Based Superalloys)</li><li>The XPS and GDS Study of SrBi₂Ta₂O₉/ZrO₂/Si (MFIS) Structure According to Heat Treatment Effects of ZrO₂ Buffer Layer</li><li>Effect of Slag Layer on Flow Patterns in a Gas Stirred Ladle</li><li>Effect of Melt Depth and Nozzle Type on the Mixing Behavior in Bottom-Blown Steelmaking Ladle - A Water Model Approach</li><li>The Effect of Cold Equal Channel Angular Process on Texture of Magnesium Alloy (AZ31)</li><li>Kinetic Analysis of the Decomposition of Calcium Carbonate Using Danyang Limestone</li><li>Effect of Frit Content in Ag Paste and Thickness of Transparent Dielectric on Yellowing Phenomenon</li><li>Effect of Thermo-Mechanical Variables on the Dynamic Ferrite Transformation Induced by Hot Deformation in 0.22C-Mn Steel</li><li>Formation of Ultra Fine Ferrite and Determination of Critical Strain in the Strain Induced Dynamic Transformation for 0.22C-Mn Steel</li><li>Prediction of Flow Curves and Micro-Structural Evolution in Strain Induced Dynamic Transformation of Low Carbon Steel</li><li>Textures and Mechanical Properties of Melt-Extruded Al-Cu Alloys</li><li>Effect of Electromagnetic Stirring on Orientation Distribution Function of Primary Solid Phase of Al-Cu Alloy</li><li>Cell Sensing Margin of Lead-Free (Bi,La)₄Ti₃O₁₂Thin Film Deposited on MTP Cell Structure in High Density FeRAM Device</li><li>Hydrogen Absorption Kinetics of Ti-Nb-Cr Alloys</li><li>Effects of La₂O₃ on the Piezoelectric Properties of Lead-Free (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ Piezoelectric Ceramics</li><li>Quantitative Analysis of Micro-Macro Domain Transition of PNN-PT-PZ(x) System at Higher PZ Content</li><li>Effects of Void Formation within the Pb-Free BGA Solder Balls on the Mechanical Joint Strength</li><li>Interfacial Reaction and Joint Strength on Cu UBM with Pb-Free Flip Chip Solder Bumps</li><li>TEM Observation of Interfacial Reaction Layers Formed Between Pb(Lead)-Free Sn-3.5Ag Solder and ENIG Plated Cu Substrate</li><li>Reliability of Sn-Ag-Cu Flip Chip Package with Underfill under Thermal Shock</li><li>The Effect of Boron on the Sliding Wear Behavior of Iron-Based Hardfacing Alloys for Nuclear Power Plants Valves</li><li>Sliding Wear Behaviors of Steam Generator Tubes in Various Environments</li><li>Fabrication of Lead Free Micro Solder Powder by Melts Dispersion Technique</li><li>Etching Mechanism of Pb-Free Glasses in Acid Solution for Barrier Ribs in Plasma Display Panel</li><li>Thermal Properties of Bi₂O₃-B₂O₃-ZnO Glass System</li><li>Formation of Layer on Bismate Frit Surface during Wet Milling</li><li>Development of Novel Wastewater Reclamation System Using Microfiltration with Advanced New Membrane Material and Electrodialysis</li><li>Changes in Adsorption Characterization of MSWI Fly Ash by NaOH Treatment ( ? )</li><li>Evaluation of Pelletized Adsorbent Made for Removing VOCs by MSWI Fly Ash ( ? )</li><li>The Effect of Meta Kaolines on the Activation of Waste Concrete Sludges</li><li>Fabrication Characteristics of Mineral Wool Fiber Used the Waste</li><li>Application of Media Manufactural by Waste Plastic to Stormwater Treatment in Urban Drainage System</li><li>Recycling of Waste Coal Fly Ash: Synthesis of Zeolite-Like Minerals from Residue Yielded by Extraction of Aluminum Ions</li><li>Polymer/Inorganic Composite Materials for Quick Repair of Cement Concrete Pavement</li><li>Luminescence Porous Ceramics Using Recycling Glass</li><li>Effect of Pair-Mineralizer on the Reaction of Alite and Calcium Langbeinite Formation</li><li>Zeolite Synthesis from Coal Bottom Ash for Recycling as an Absorbent of Heavy Metals</li><li>Stabilization Behavior of Heavy Metals Derived from Wastes on Cementitious Minerals and Hydrates</li><li>Effect of Slag Compositions on the Extraction of Metallic Components from the Used PCB</li><li>Low Temperature Synthesis of Porous Cordierite from Fly Ash</li><li>Fabrication and Characterization of Porous Ceramic Panel Using Recycled Glass Powder</li><li>Formation Characterization of Ultra-Fine Cu Powder from Cu(OH)₂ Slurry by Wet Reduction Method</li><li>Characterization of Friction Materials Reinforced by Porous Mullite</li><li>A Study of Ga₂O₃ Nanomaterials Synthesized by the Thermal Evaporation of GaN Powders</li><li>Characteristics of SnO₂ One-Dimensional Nanomaterials Synthesized on TiN-Coated Substrates by the Evaporation of Sn Powders</li><li>Self-Propagating High-Temperature Synthesis for Aluminum Oxynitride (AlON)</li><li>Effect of Hydrogen Content on Characteristics of Cu/C: H Films Coated on Polyethylene Terephthalate Substrate Prepared by ECR-MOCVD Coupled with a Periodic DC Bias</li><li>Effects of Annealing Atmosphere on the Optoelectrical Properties of ZnO Thin Films Grown by Atomic Layer Deposition</li><li>Sputter-Deposited Cr as an Alternative to Electroplated Cr</li><li>Environmentally Friendly Polyurea Microcapsules of Pesticides by PVA Mediated Interfacial Polymerization</li><li>Removal of Bilirubin by Albumin-Fixed Polysulfone Membrane</li><li>Effects of Anodizing Time on Anodizing of Mg-Al Alloy in Alkaline Solution</li><li>Energy Efficiency Alloy Design in PSN-PMN-PZT Ceramic System for Piezoelectric Transformer Application</li><li>Vibration-Damping Capacity of Lotus-Type Porous Magnesium at Room Temperature</li><li>Microstructural Transformations of an Amorphous Fe₉₀ Zr₁₀ Alloy Induced by High-Energy Ball-Milling</li><li>A Study for Microwave Enhanced Synthesis of NIR Absorbing Materials</li><li>Hydrothermal Syntheses of Nickel Nanosheets and Their Morphology</li><li>Characterization of Ni Nanopowders Produced by Electrical Explosion of Wire Technique</li><li>Effect of Physical and Chemical Change of Lignocellulosic Fiber on Heavy Metal Ion Removal</li><li>Surface Characteristics of the Engineered Polymeric Media for Filtration and Adsorption in Urban Runoff</li><li>Preparation of Nickel Powders by the Reduction of Hydrazine of Ni(OH)₂ Reactant Slurries from Nonaqueous Media</li><li>Synthesis of Nickel Powders by the Reduction of Hydrazine from Diethanolamine Solution</li><li>Mechanical Properties of Copper Hollow Sphere Manufactured by Sintering Process</li><li>Nano Scale Material Property Measurement of MEMS Material Using Piezo Actuated Material Testing Machine</li><li>Effect of Indium on the Microstructures and Mechanical Properties of Dental Gold Alloys</li><li>Rheological Characteristics of Mg-Al Alloys with Ceramic Particles for Meta Foam</li><li>An Amperometric Biosensor Using Prussian Blue Modified Electrode</li><li>Preparation of Activated Carbon Fibers by Chemical Activation Method with Hydroxides</li><li>Preparation of Porous Hydroxyapatite Scaffolds for Bone Tissue Engineering</li><li>Synthesis of Biodegradable ?-TCP/PLGA Composites Using Microwave Energy</li><li>Synthesis and Magnetic Properties of Fe/SiO₂ Nanocomposite Powders by the Chemical Vapor Condensation Process</li><li>Fabrication of Nanoscale SiC-Based Ceramic Patterns with Near-Zero Residual Layers by Using Imprinting Technique and Reactive Ion Etching</li><li>Preparation of Silver Metallic Sponge from Macroporous Carbon Template</li><li>Synthesis of Polymeric Precursor for Oxidation-Resistant SiCBN Ceramic Microstructure via Soft Lithography</li><li>Influence of the Cup's Edge Geometry on the Transferred Stresses to the Ball/Cup Interface in all Ceramic THR</li><li>Effect of Pouring Temperature and Holding Time at Semi-Solid Region on the Morphology of Primary Solid Phase in Semi-Solid Slurry</li><li>Fabrication and Microstructure of ZnO-TiO₂ Composite Membranes by a Reverse Micelle and Sol-Gel Processing</li><li>Fabrication and Microstructure of ZnO-SiO₂ Nanoparticles by a Reverse Micelle and Sol-Gel Processing</li><li>Investment Casting of Ti Alloys for Biomedical Application</li><li>Controlled Release of Active Substance from Biodegradable Copolymer Matrix</li><li>Comparison of Silicon Coatings Deposited by Vacuum Plasma Spraying (VPS) & Atmospheric Plasma Spraying (APS)</li><li>Environmentally Conscious Gas Mixtures for Magnesium Melt Protection</li><li>Hydrogen Permeation and Surface Characteristics of Pd-Coated Ni-Nb-Ta Amorphous Alloy Membrane</li><li>Comparison of Hydroxyapatite Synthesized under Different Conditions</li><li>Densification Mechanism of Fine Ni-20Cr Powder during Pulsed Electric Current Sintering</li><li>Influence of Two-Step Sintering on Transparency of High Purity Alumina</li><li>Radio Frequency Interference Characteristics of Plate-Like Soft Magnetic Powders-Polymer Composites</li><li>Synthesis and Properties of Bulk Amorphous/Nanocrystalline Aluminum Alloy Composites</li><li>Design for Environment (DfE) of Ultralight Aluminum Camshaft Development</li><li>Tribological Analysis of Al₂O₃/TiO₂/ZrO₂ Nanocomposites as an Alternative for THR Materials</li><li>The Characteristic of the La₃Ga₅SiO₁₄ Single Crystal Grown by Vertical Bridgman Method in Ar Atmosphere</li><li>Preparation and Characterization of a New Type of Sr-Contained Hydroxyapatite Bone Cement</li><li>High Grade Purification of Sericite by Hydrocyclone and Magnetic Separation</li><li>Fabrication and Properties of High Strength Al-8Fe-2Mo-2V-1Zr Alloy Produced by Melt Spinning Techniques</li><li>Low Elastic Modulus ? Ti-Nb-Si Alloys for Biomedical Applications</li><li>Surface Modification of Glass Plate to Enhance Thickness of Silica Aerogel</li><li>Synthesis of AlON Refractory Raw Materials from Aluminum Dross Using Thermite Reaction Process</li><li>Thermopneumatic-Actuated Polydimethylsiloxane (PDMS) Microfluidic System</li><li>Process Development for Cost-Effective Ag-Ni Contact Materials by Simple Solidification Control</li><li>Novel Method to Fabricate Porous n-HA/PVA Hydrogel Scaffolds</li><li>Biomimic Tubulose Scaffolds with Multilayer Prepared by Electrospinning for Tissue Engineering</li><li>A Fast and Low Temperature Eco-Process for Alloy's Joining</li><li>Antibacterial Effect and Security Evaluation on Nano-Hydroxyapatite Bearing Cu²⁺ and Zn²⁺</li><li>Study on Improving Stainless Steel Antibacterial Capability</li><li>Influences of the Crystallization Behavior of n-HA Reinforced PA66 Biocomposite on Its Mechanical Properties</li><li>Foaming Characteristics of Al-Mg Alloy Foam</li><li>Fabrication of Porous Clay Materials with Aligned Pore Structures by Freeze-Drying</li><li>Solvents Effects on Physicochemical Properties of Nano-Porous Silica Aerogels Prepared by Ambient Pressure Drying Method</li><li>Estimation of Environment-Friendly Permeable Pavement at Laboratory Test</li><li>Development of Fiber Filter Media to Control Heavy Metals and Nutrients in Urban Stormwater Runoff</li><li>Use of Bauxite Minerals to Control Pollutant Outflow in Urban Areas</li><li>Preparation of SiC Nanoporous Membrane for Hydrogen Separation at High Temperature</li><li>Kinetics of the SiC Formation from Carbon Thin Film and SiO Gas</li><li>Modification of Natural Zeolite Powder and Its Application to Interior Non-Woven Textile for Indoor Air Quality Control</li><li>Study on the Biomimetic Properties of Bone Substitute Material: Nanohydroxyapatite/Polyamide 66 Composite</li><li>Via/Hole Filling by Pulse-Reverse Copper Electroplating for 3D SiP</li><li>Electrical and Luminescent Properties of Size Controlled ZnO Nanorods</li><li>Structure and Electrochemical Properties of FeS_x Nanoparticles Synthesized by Chemical Vapor Condensation Process</li><li>Effect of Nano-Structures on the Optical Features of Hydrogenated Amorphous Si Films</li><li>Photo- and Electroluminescence of Hydrogenated Nanocrystalline Si Prepared by Plasma Enhanced Chemical Vapor Deposition Techniques</li><li>Nanostructural and Optical Features of nc-Si:H Thin Films Prepared by Plasma Enhanced Chemical Vapor Deposition Techniques</li><li>Effect of Porosity on Fatigue Strength of Lotus-Type Porous Copper</li><li>Microstructure, Mechanical Property and Antibacterial Characteristics of Ferritic Stainless Steel</li><li>Effect of Surface Morphology on Apatite Formation</li><li>Effect of Compatibilizers on the Properties of Nano-Hydroxyapatite Reinforced Polyamide 66 and High Density Polyethylene Blends</li><li>Study on the Properties of Microwave Absorption of Zinc Oxide Whisker</li><li>Preparation of Single-Phase Aragonite Precipitated Calcium Carbonate Used as an Inorganic Eco-Material</li><li>Inhibition Mechanism of Magnesium Ion on Carbonation Reaction with Ca(OH)₂ and CO₂</li><li>Hydraulic Properties of Tetracalcium Aluminoferrite with Adsorption of Silicate Ions</li><li>Growth of ZnO Thin Films by Metalorganic Chemical Vapor Deposition Using Isopropyl Alcohol for Oxygen Precursor</li><li>Growth of Carbon Nanorods on Tungsten Filaments of Light Bulbs</li><li>A Tetragonal Phase in Cr(N,O) Thin Film Prepared by Pulsed Laser Deposition</li><li>Clarification of Wire Heating Process in Pulsed Wire Discharge with High-Speed Gas Puff</li><li>Mechanical Properties and Machinability of Si₃N₄/hBN Composites Prepared by Pressureless Sintering</li><li>Micro Groove Forming on AlN/hBN Composites Using Powder Blasting Process</li><li>Microstructural Development of SiC Ceramics by Liquid-Phase Sintering with Spark Plasma Sintering Technique</li><li>Change of Formation Yield and Characterization of PCC Particle Synthesized with Impurity Ions Contents by Carbonation Process</li><li>Fabrication of Ceramic Microchannels with Tailored Pores</li><li>Electrical Properties of (Ba,Sr)TiO₃ Thin Films with Self-Seed Layer Deposited by R.F. Magnetron Sputtering</li><li>Microstructure and Electrical Properties of R.F Magnetron Sputtering Derived PZT Thin Films Deposited on Interlayer for Pyroelectric IR Sensor</li><li>Factors of Nozzle Design Affecting on Supersonic Flow in Cold Spray Process</li><li>Preparation of Electrically Conducting Ceramic Foams</li><li>Silicon to Silicon Wafer Bonding at Low Temperature Using Residual Stress Controlled Evaporated Glass Thin Film</li><li>Effect of the Palladium Mid-Layer on the Cyclic Oxidation of Platinum Aluminide Bond Coating</li><li>The Effect of Tungsten Content on Nanocrystalline Structure of Ni-W Alloy Electrodeposits</li><li>Materials for Devices Applications in Life Sciences</li><li>Low-Temperature Thermoelectric Properties of Zn₄Sb₃ Prepared by Hot Pressing</li><li>Electrochemical Characteristics of Nano-Silicon/Graphite Composite for the Anode Material of Lithium Secondary Batteries</li><li>Graphite/Carbon Nanofiber Composite Anode Modified with Nano Size Metal Particles for Lithium Ion Battery</li><li>Effects on the Carbon Matrix as Conductor in Sulfur Electrode for Lithium/Sulfur Battery</li><li>Fabrication and Thermoelectric Properties of p-Type Bi₁Sb₄Te_7.5 Alloy Doped with Fe₃O₄</li><li>Characterization of a Piezoresistive Microcantilever as a Sensor for Detecting the Bio-Molecules</li><li>Characterization of Electrical Properties of Si Nanocrystals Embedded in an Insulating Layer by Scanning Probe Microscopy</li><li>Charge/Discharge and Electrochemical Characteristics of Secondary Lithium/Pyrite Battery</li><li>Microstructure and Electrochemical Properties of Post Heat-Treated Li(Ni_1/3Co_1/3Mn_1/3)O₂ Cathode Materials for Lithium Ion Battery</li><li>Effects of Multiwalled Carbon Nanotubes on the Cycle Performance of Sulfur Electrode for Li/S Secondary Battery</li><li>Thermoelectric Properties of Te Doped CoSb₃ -4mol%Zn₄ Sb₃</li><li>Fabrication of YSZ Thin-Film for SOFC Applied by Electron Beam PVD</li><li>Synthesis of Ceria-Coated Copper Oxide Particles for Direct Hydrocarbon SOFCs Anode</li><li>Microstructure and Thermoelectric Properties of P-Type Bi_0.5Sb_1.5Te₃ Compounds Prepared by Spark Plasma Sintering</li><li>Effects of Heat Treatment on Hardness of Nanocrystalline Ni-W Electrodeposits</li><li>The Effects of Si Addition to the Tin Oxide Thin Films on the Electrochemical Characteristics for Lithium Secondary Microbattery Anode</li><li>Effects of Deformation on Atmospheric Corrosion of Galvanized Steel</li><li>Surface Strengthening of Polymer Micromold Using Electroless Ni-P Deposition</li><li>Synthesis and Analysis of Nano-Crystalline LiNiVO₄</li></ul>