Eco-Materials Processing and Design X

Preface
A. Materials for Renewable Energy and Energy Saving
Utilization of Gneiss in Asphalt Concrete Mixtures
Preparation of Sb:F:SnO2 Films and their Application in Low-E Glass
Evaluations of Hydrogen Properties on MgHx-Nb2O5 Composite by Mechanical Alloying
Fabrications and Evaluations of Hydrogen Permeation on TiN-5wt%Ni Membrane by Spark Plasma Sintering
Synthesis, Characterization and Electrochemical Performance of Li2Mn0.7Fe0.3SiO4 Prepared from Solid-state Reaction
Ironmaking Process Parameter Analysis and Optimization for the Blast Furnace
Evaluations of Hydrogen Permeation on ?-Al2O3 Synthesized by Sol-Gel Process
Porous TiO2 Layer Encapsulated Silicon as the Anode Material for Lithium Secondary Batteries
Effect of SiC on Microstructures and Properties of Cordierite-Mullite Multiphase Ceramics Material
Development of an Automated Design System for Oil Pumps with Multiple Profiles (Circle, Ellipse and Involute)
Electrochemical Properties of LiFePO4/C Composite Improved by High Energy Milling
Research of BOF Protection Technology by Slag Splashing
Study on Transition Characteristics of Poly(Ethylene Glycol)/ Selected Fatty Acids Phase Change Materials
Preparation and Microstructural Characterization of Al2O3/ZrO2 Nanocomposites to Use in the Femoral Head of Hip Replacement
Effects of Atomizing Gas on Microstructural Characteristics and Mechanical Properties of Spray Formed High Si Steels
Binder-Free Pellet Fabrication of Ultra-Fine Poly-Si Powder for Economical Production of Solar Grade Si Ingot
Influence of Different Interlayers Metals on Properties of Diffusion Bonding Joint of Tungsten to Copper
Micro Mechanical Property Measurement of Nickel (99.9%) Thin Film Using Vision Strain Measuring Method
Preparation and Characterization of Sulfonated Poly(ether Sulfone) Using 4,4-Bis(4-Hydroxylphenyl)valeric Acid for Proton Exchange Membrane Fuel Cell Application
Effects of Flow Characteristics in Polymer Electrolyte Membrane Fuel Cell
B. Eco-Materials Processing and Design for Reduction of Environment Impact
Estimation of Energy Requirements and Atmospheric Emission in Continuous Casting Process for Al Wire
Synthesis and Microstructural Control of In2O3(ZnO)3 Layered Compound by Microwave-Heating
Eco-Friendly Grain Refinement for A3003 Alloy
Studies on Filming of Corn Starch
Analysis of the Grain Orientation and Texture of Friction Stir Welded Magnesium Alloy
Densification of Alumina Powder by Using PECS Process with Different Pulse Electric Current Waveforms
Experimental Study of Non-Sintering Block for Reducing Surface Temperature Using Recycling Bottom Ash
Microstructures and Electrical Properties of Random-Oriented (Bi,La)4Ti3O12 Thin Film Deposited by Pulsed-DC Sputtering Method
A Method of Preparing Grinding Medium of White and High Performances Using Natural Bauxite Ore
Lignin-Quaternary Adsorbent: Synthesis, Characterization and Application for 2, 4, 6-Trinitrotoluene (TNT) Adsorption
Synthesis of Ca-Al-Si-O Compounds from Local Wastes
Removal of Particles and Dissolved Metals in Motorway Runoff by Filtration and Adsorption Using the Expanded Polypropylene Media
Development of Eco-Debinding Process Using Supercritical Extraction of Low Molecular Organic Binders in Ceramic Bodies with Nano-Sized Capillary Structure
Thermoplastic Modification to Konjac Glucomannan with Methyl Acrylate
Reinforcement Design of Poplar Glulam
The Optimum Design of Production Technology of the Poplar LVL
Synthesis of Magnetite Nano-Particles and Powder Activated Carbon as a Novel Material for Water Treatment
Development of Non-SF6 Strip Casting Process for Mg Alloys
The Influence of Sn Addition on the Corrosion Behavior of Mg-5Al-1Zn Alloy
Reliability Analysis of the Structural Laminated Veneer Lumber
Effect of Nitrogen Content on the Hot Ductility during Hot Deformation of Stainless Steels
Effect of Warm Processing Parameters on the Precipitation of ?'-Phase in 2205 Duplex Stainless Steels
Effect of Calcium on Solidification Behavior of Mg-Sn Based Alloys
A Study on the Formability of AZ31B Magnesium Alloy Sheet with Experiment and Simulation

In Situ Fracture Behavior of AZ51 and AZT513 Alloy
Evaluation on Solar Heat Reflective Coatings to Reduce Asphalt Concrete Temperature
Eco-Fabrication of Metal Nanoparticle Related Materials by Home Electric Appliances
Research on Crosslinking of Polylactide Using Low Concentration of Dicumyl Peroxide
Sodium Lignosulphonate-Polyvinyl Alcohol Bioadsorbent: Synthesis, Characterization and Adsorption for Pb (II)
Synthesis and Thermal Properties of Etherified Konjac Glucomannan
Development of Environmental-Friendly Water-Retentive Asphalt and its Characteristics
Field Applications of Urban Non-Point Source Pollutant Reducing Treatment System with the Expanded Polypropylene(EPP) Media for Treating PAHs from Road Runoff
Effects of Pair-Mineralizer on Burnability of Clinker and Formation of Mineral
Effect of Final Annealing Temperature on Antibacterial Precipitate of Copper-Bearing Ferritic Stainless Steel
Collapse-Type Shrinkage in Plantation-Grown Eucalyptus Cells When Subjected to Heat-Steam Treatment
Characterization of Power Plant Bottom Ash and its Application to Cement Mortar
The Effect of Aging on Synthesis of Zeolite at High Temperature
Synthesis of Zeolite Added Clay and Sewage Sludge
Explicit Finite Element Analysis of the Plunge Stage of Tool in Friction Stir Welding
Synthesis of Silicon Carbide Powders from Iron Tailings
Key Technology for Extraction, Thermoplastic Modification and Application of Lignin
Influence of CdZnTe/Au Contact on the Wire Bonding Property between the Down-Lead and Au Electrode
Practical Recycling Application of Power Plant Coal Ash for High Performance Shotcrete Material
Recycling of Waste Concrete and Fly Ash for Recycled Aggregate Concrete: Fundamental Characteristics Evaluation
Tensile Properties of AZ91D Magnesium Alloy Coated by Plasma Electrolytic Oxidation
Material Research of Eco-Product Design
C. High Performance Materials
Study on Micro-Hardness and Electrical Conductivity in as Cast Cu-Fe-P Alloys
Fabrication and Characterization of AZ91/CNT Magnesium Matrix Composites
Numerical Simulation of Perforated Hollow Sphere Structures (PHSS) to Investigate Mechanical Properties
Influence of SO3 Content on Drying Shrinkage Cracking Resistance of Cement-Fly Ash Stabilized Crushed-Stones
Research on Magneto-Rheological Fluids Torsional Damper and Control System Applied to Controlling Carbon Fiber Strain
Effect of Deformation Parameters on Deformation Behavior of Ti14 Alloy during Semi-Solid Compression
Effect of CaO Addition on High Temperature Tensile Properties of Mg Casting Alloys
Precipitation Prediction and Experimental Clarification of Mg-Al-Sn System
Synthesis and Properties of Polyurethane-Based Actuator with Poly(dimethyl Siloxane)
Electrical Property Characterization of Plasma Sprayed Polycrystalline Silicon

In Vitro Assessment of Antibacterial Activity and Cytotoxicity of Silver Contained Antibacterial HA Coating Material
The Effect of Filler on the Properties of Silicone Rubber
Development of Composite Binder System for Shell Mold in Precision Casting of Thin Stainless Steel
Improving Contact Damage Resistance of Thermal Barrier Coatings by Incorporating Buffer Layer
An Investigation on Erosion Wear Characteristics of SiC Particle Reinforced Steel Matrix Surface Composite
Microstructure and Magnetic Properties of Undercooled Fe-80at%Ni Alloys
Synthesis of High Purity Ti3SiC2 Powder by Vacuum Sintering
Deformation Behavior and Microstructure of Low Carbon High Manganese Steels in Tensile Strain
Mechanical Property of FRP Bar and Design Method of Hybrid FRP Bar
Fracture Behavior of Plasma-Sprayed Thermal Barrier Coatings with Different Bond Coats upon Cyclic Thermal Exposure
Resistance to Permanent Deformation and Low-Temperature Cracking of Porous Asphalt Mixture Using the Tafpack Super Additive
Investigation on Preparation and Performance of Micro-Powder Rubber Modified Asphalt
Influence of Aging Time on Sigma Phase Precipitation in SAF2507 Super-Duplex Stainless Steel
Dielectric Property of Laminated AlN/BN Ceramic Composites
Fabrication and Hardening Treatment for SiC/AlN Ceramic Composites
Effect of Aluminum Addition on Synthesis of Ti3SiC2 by Vacuum Sintering
Influence of the Porosity of C/C on the Characterization of C/C-SiC Composites Prepared by Reactive Melt Infiltration Method
Computer Simulation of Fluid Flow, Heat Transfer for the Production of Cu Thin Wire by OCC Process
On Cold Materials of Pavement and High-Temperature Performance of Asphalt Concrete
Characterization of Nanocrystalline CoCrFeNiCuAl High-Entropy Alloy Powder Processed by Mechanical Alloying
Application of Al-Mg Alloy in Bearing Steel
Sigma Phase Precipitation of Duplex Stainless Steel and its Effect on Corrosion Resistance
Fast Densification of B4C Ceramics with Al2O3 as a Sintering Aid by Spark Plasma Sintering
Fracture Characteristics of Vacuum Diffusion Bonded TA2 Titanium to 1Cr18Ni9Ti Stainless Steel Joint with Nb+Ni Interlayers
Investigating the Properties of Machinable Ceramics SiC/C(Graphite) Prepared by Plasma Activated Sintering
Research on the Hot Precision Processing of TiAl Alloys
Low Temperature Transformation of 3 mol% Yttria Stabilized Zirconia Coatings Deposited by Air Plasma Spraying
Analysis of Anti-Seismic Performance of HRB500 Steel in Fire
Preparation of C/C-SiC Brake Materials with Low Cost and High Friction Performance
Preparation and Mechanical Properties of Carbon Nanotubes Reinforced Barium Aluminosilicate-Silicon Nitride Composites
Effect of Precursors on Transmittance and Microstructure of Mullite Ceramics
D. Hybrid Composites for Solving Ecological Issues
Microstructure and Flexural Property of CaCO3 Whisker Reinforced Epoxy Composite Material
Hybrid Tooling Using High Speed Cutting and Other RP (Rapid Prototyping) Technologies
Synthesis of Fe3Si-Ti(C0.3, N0.7) Multiphase Composite Ceramic from Iron Tailings and its Properties
Fabrication and Characterization of Barium Aluminum Silicate-Silicon Nitride Composites
Environmentally Benign Material Removal Processes for the Fabrication of Microdevices
Preparation of Ti/Cu Oxide Coating on Alumina by Sol-Gel Method
E. Nano-Sructure Materials
Preparation of Nano-Sized ZnO Powder by Freeze-Drying
Preparation and Properties of PP/PLA /Multiwall Carbon Nanotube Composites Filaments Obtained by Melt Compounding
The Microstructural Deformation of the Montmorillonite Particles/Polypropylene/Polylactic Acid Nanocomposite Filaments Infused with Plasma Treated Montmorillonite
Effects of Eu2+, Dy3+ Contents and Particle Sizes on the Luminescent Properties of SrAl2O4 Phosphor by the Sol-Gel Process
Growth of Highly Orientated and Well-Aligned ZnO Nanowhiskers Using Aqueous Solutions
The Strain Rate Sensitivity of Plasma Treated Nano TiOx Particles/PP/PLA Nano-Composites Filaments
Crystallization and Mechanical Properties of Nano ZnO/PP/PLA Composite Filaments
Investigation of Microstructure and Machinability of the B4C/BN Composites
ZnO Nanorods Synthesized in Large-Scale via Sonochemical Method and its Sensing Potential towards Methyl Mercaptan
Preparation and Properties of Nanoclay/TPS/Asphalt Ternary Binders
Dispersing Single-Walled Carbon Nanotubes in Water by Adsorption of Polyphenols
Synthesis and Characterization of FePt Nanoparticle/Single Walled Carbon Nanotube Composites
Effect of Nano-Sized Metal Colloids on Color Change of Photosensitive Glass by Using X-Ray Irradiation
R-Curve Behavior of Machinable SiC/h-BN Nano-Composites
Preparation and Electrocatalytic Properties of Single Walled Carbon Nanotube/Platinum Nanoparticle Composite
Fabrication Process for Nanorod Array Structure by Using Aluminization and Internal Oxidation of Nickel
Fabrication and Formation Mechanism of Flowerlike Bicephalous TiB2 Nanowhisker Clusters
Fabrication of La Doped ZnO Nanorods via a Solvothermal Route
Preparation of Silver Nanoplates in SDBS System
Preparation of Chitosan Grafting Acrylic Acid Supported Palladium Fibrous Catalyst and its Application in Hydrogenation
Synthesis and Luminescent Properties of Porous YVO4:Sm Nanoplates
Effect of Surface Nanocrystallization Method on Fatigue Strength of TA2
Fabrication of Nano-MgO Reinforced Fe-Cr-Ni Composites by Reactive Hot Pressing
F. Biomaterials
Adsorption and Deposition of Cu (II) on Modified Valonia Tannin
Applied Study of Fibre Padding and Ceramic in Micro-Polluted Water Treatment

In Vitro Cytocompatibility of Plasma-Sprayed Dicalcium Silicate/Zirconia Composite Coating

In Vitro Cytocompatibility of Silver-Containing Hydroxyapatite Coatings
Extraction of Lignin from Pulping Black Liquor by Organic Acid
Study of Machinable Dental Glass Ceramics
Response of MG63 Osteoblast-Like Cells on Pyrolytic Carbon Coated Carbon/Carbon Composites
Corelation of Colorimetric Parameters with Collapse-Shrinkage Properties in Plantation-Grown Eucalyptus Based on Eco-Furniture Materials
Study of Nano-Hydroxyapatite/Polycarbonate Composite for Bone Repair
Fabrication of a High Performance Ti Alloy Implant for an Artificial Hip Joint
Polymerization and Characterization of Functionalized Poly(L-Lactide)
Synthesis of Fluorine-Containing Organic Silane Reagent
G. Recycle and Re-Use/Replacement of Hazard Materials
The Comprehensive Utilization of EAF Dust and Pickling Sludge of Stainless Steel Works
Design of Inner Wedge-Form Tool in Precision Recycle of Digital Paper Display
Removal of Zn (II) from Aqueous Solution by Copolymer of Grafting Acrylic Acid onto Deacetylated Konjac Glucomannan
Thermodynamic Consideration of CaO Added Mg Alloys in Recycling Process
Improving Effect of Mineral Admixtures on Volume Stability of Steel Slag Mortar
Properties of Cement Paste Using Mine Tailing and Polymer Materials
Flexibility Modification of KGM Membranes by Maleic Anhydride
Effect on Compressive Strength by Mixing Ratio of MSWI Melting Slag/Bottom Ash
Use of Recycled Calcium Slag for Clean Steel Refining
Compressive Strength of Brick Made from Waste Materials
Adsorption of Phosphate from Aqueous Solution with Blast Furnace Slag Activated by Hydrated Lime as Sorbent
H. Photocatalysts
Investigation of Electronic Structures of F-Doped TiO2 by First-Principles Calculation
Indium-Sensitized UV Photocatalysts Made from Alkali Titanate Microfibers
Preparation and Characterization of Fe-Doped BiVO4
Influence by Difference of the Photocatalyst Nanoparticle Shape to Skin
Preparation and Photocatalytic Performance of Nano Titania-Coated Beads
Improvement in Photocatalytic Activity of TiO2 by Addition of Small Amount of TiO2-xNy
Photocatalytic Properties of TiO2-Coatings Mounted on CaAl2O4:Eu2+, Nd3+ without Light Source
A New Preparation Method of Visible Light Responsive Titanium Dioxide Photocatalytic Films by Sol-Gel Method
Effective of SiO2 Addition on the Self-Cleaning and Photocatalytic Properties of TiO2 Films by Sol-Gel Process
Synthesis of Mn-N-Codoped TiO2 Photocatalyst and its Photocatalytic Reactivity under Visible Light Irradiation
Preparation of Titanate Nanotubes by Hydrothermal Method
Photocatalytic Activity of Porous TiO2 Film Prepared by Dip-Coating Technique Using Sol Containing Trehalose
Preparation of TiO2 Thin Films and its Superhydrophilic Properties
Light Conversion by Size Control of Inorganic Phosphors
Properties Predicting of Transition Metal-Doped Anatase TiO2
Buried-Layer Bared AZO/TiO2 Semiconductor Coupled Films and their Photocatalytic Properties
I. Multifunction of Materials
Effects of Electrical Discharge Energy on Machining Performance of Sintered NdFeB Magnet
Development of Porous Material with High Young's Modulus and Low Thermal Expansion Coefficient in SiC-Vitrified Bonding Material-LiAlSiO4 System
Viscoelastic Analysis on High Temperature's Stability of Asphalt Pavement
Preparation of Superfine Molybdenum Powder by Reduction Process
The Electrodeposition of Nanostructured Ni-TiN Composite Films
Electrodeposition of Nanocrystalline CoNiFe Thin Films Prepared by Cyclic Voltammetry
Multiferroic and Piezoelectric Behavior of Transition-Metal Doped ZnO Films
Preparation and Properties Fluoralkylpolysiloxane Modified Polyurethane Films
J. Porous Materials
Preparation of Bioactive Porous Titanium-Molybdenum Alloy through Powder Metallurgy
Research on Physical and Mechanic Properties of Green-Growing Porous Concrete for Ecological Slope Protection
Porous Silicon Nitride Ceramics Prepared by Reduction - Nitridation of Diatomite
Structure Change and Improvement of the Mechanical Properties of Lotus-Type Porous Copper by ECAE Process
Fabrication and Properties of Pressureless Sintered Si3N4/BN Composite Ceramics with La2O3-Al2O3-Y2O3 as Sintering Additives
Porous Materials with Hybrid Structure Produced by Nitriding Partially-Sintered Silicon
Abrasive Grain Efficiency and Surface Roughness in Machining Magnesium Alloys by Newly Developed Cup-Type Diamond-Grinding-Wheels
A Novel Method for the Preparation of Porous SiC
Fabrication of Clay Foam Ceramics Using Silicon Carbide and Ferric Oxide as Foaming Agents
Mechanical Behaviour of High Density Polyethylene Based Foams
Fabrication of Porous Metals with Directional Pores through Solidification of Gas-Dissolved Melt
Geopolymer Concrete Fabricated by Waste Concrete Sludge with Silica Fume