Advanced Materials and Engineering Materials IV
Selected, peer reviewed papers from the 2014 4th International Conference on Advanced Materials and Engineering Materials (4th ICAMEM 2014), October 16-17, 2014, Ningbo,China and October 19-20, Hong Kong, China
Published on 11. February 2015
Book
Paperback/Softback
598 pages
978-3-03835-367-6 (ISBN)
Description
Collection of selected, peer reviewed papers from the 2014 4th International Conference on Advanced Materials and Engineering Materials (4th ICAMEM2014), October 16-17, 2014, Ningbo, China and October 19-20, Hong Kong, China.
The 115 papers are grouped as follows:
Chapter 1: Behavior and Characterization of Materials,
Chapter 2: Material Processing,
Chapter 3: Heat Treatment of Metals,
Chapter 4: Concrete, Rock, Civil Engineering,
Chapter 5: Fluid Mechanics, Heat Transfer,
Chapter 6: Strength of Materials, Accidents, Corrosion,
Chapter 7: Films, Surface Analysis, FPGA and ROM,
Chapter 8: Machine Parts and Mechanisms of Technological Equipment, Control and Automation,
Chapter 9: Sensors and Measurement.
The 115 papers are grouped as follows:
Chapter 1: Behavior and Characterization of Materials,
Chapter 2: Material Processing,
Chapter 3: Heat Treatment of Metals,
Chapter 4: Concrete, Rock, Civil Engineering,
Chapter 5: Fluid Mechanics, Heat Transfer,
Chapter 6: Strength of Materials, Accidents, Corrosion,
Chapter 7: Films, Surface Analysis, FPGA and ROM,
Chapter 8: Machine Parts and Mechanisms of Technological Equipment, Control and Automation,
Chapter 9: Sensors and Measurement.
More details
Series
Language
English
Place of publication
Zurich
Switzerland
Target group
College/higher education
Professional and scholarly
Illustrations
Illustrations, unspecified
Dimensions
Height: 240 mm
Width: 170 mm
Thickness: 30 mm
Weight
1200 gr
ISBN-13
978-3-03835-367-6 (9783038353676)
DOI
10.4028/b-Dhp8aX
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Katsuyuki Kida
Advanced Materials and Engineering Materials IV
Software
02/2015
Trans Tech Publications Ltd
€397.18
Shipment within 10-20 days
Katsuyuki Kida
Advanced Materials and Engineering Materials IV
E-Book
12/2014
Trans Tech Publications Ltd
€211.86
Available for download
Person
Ed. Katsuyuki Kida
Content
Preface, Committees and Sponsors
Chapter 1: Behavior and Characterization of Materials
Preparation and Structure of a Novel PS/Fe3O4 Nanochain
Synthesis and Characterization of Au/Fe3O4 Nanocomposite
Design of Cylindrical Metamaterial Invisible Cloak with Non-Singular Electromagnetic Tensors
Morphology and Crsytallization Control of Multifunctional GdPO4:Eu Nanostructures by Hydrothermal Preparation
Deflagration of Emulsion Explosive
Emulsion Explosives Containing Catalytic Metal Ion
Stability Test of Emulsion Matrix in the Emulsifier
Enhance the Power Capability of TaN Thin Film Resistor by Improving Processes
Study on Low TCR TaN Thin Film Resistors by D.C. Magnetron Sputtering
Application of Dark Field Model of OM in Quantitative Detection of Strengthen Phase in Beryllium Bronze
Study of UV Irradiation on Behavior of NBR Rubber from Oil Seal
Unusual Properties of Anisotropic Magnetodielectric Metamaterials
Application of Nanocomposite Track Membranes for Electron Microscopy Samples Preparation
Magnetic Property of Ni-Doped Bi5Ti3FeO15 Multiferroic Ceramics
Effect of High Pressure Treatment and Synthesis on Multiferroic Properties of 0.9BiFeO3-0.1SrTiO3 Ceramics
Reinforcing Epoxy Resin with Polydopamine-Coated Al(OH)3: A Biomimetic Method to Constructing Organic-Inorganic Hybrid Materials
Optimization of SDC Interlayer for YSZ-Based IT-SOFCs
Ce-Ti-MoOx Prepared by Sol-Gel Method for Selective Catalytic Reduction of NO with NH3
Chapter 2: Material Processing
Experimental Correlation between Metallurgical Parameters, Hardness and Drilling Force and Moment of Al-Si Alloys
The Effection of Discharge Current on Hydrogen Plasma in the Cascaded Arc
Graded Transitions Homogeneity for Ti-50.8%Ni Processed by ECAP
Effects of Cu/Ba Ratio in Precursor on MOCVD-Deposited YBa2Cu3O7-x Films on YYC Buffered Ni-W Alloy Tape
Thermal Cycling Simulation during Remelting Process of the Steel ASTM A743-CA6NM
Extracted from Actinidia Arguta of Wild Fructification Polyphenols Optimization Conditions
Using of the Principle of Autogenous Crushing in the Production of Caustic Magnesia
A Study of Picosecond-Laser Drilling Technique in Ceramics
Welding of Aluminum to DP600 Steel Plates by Refill Friction Stir Spot Welding Process (Refill FSSW): Preliminary Results
The Effect of Laser Processing Area on Nested-Circle Drilling Method
Application of Genetic Algorithm in Cutting Parameter Optimization
A Mechanistic Model for End Milling Cutting Forces in Brittle Porous Material
Evolution of Microstructure in Semi-Solid of Al-2wt%Si-0.5wt%Mg and Al-4wt%Si-05wt% Alloys during Isothermal Holding
Chapter 3: Heat Treatment of Metals
Study on the Heat Treatment Process by Using Residual Heat after Forging of Steel 40MnB
Influence of Aging Treatment on Microstructure and Properties of GH2132
Controlled Cooling of Rotary Furnace Shell
Analysis of the Significant Influence Factors of Spray Quenching Process
Hybrid Analytical-Numerical Analysis of SAE 4150 Alloy Steel Rods Cooling
The Betti Number of Prior Austenite Structure of Repeated Quenching Bearing Steels (JIS, SUJ2)
Effect of Hot Work on Hardness and Impact Toughness of Heat Treated Low Alloy Steels
Microstructure and Mechanical Properties of a Low-Carbon Steel Treated by One-Step Quenching and Partitioning Process
Chapter 4: Concrete, Rock, Civil Engineering
Testing of Pre-Stressing Masonry Wall with Using Different Thickness of Anchor Plates
Study on the Compatibility of Self-Compacting Concrete Thickener and the Cementitious Material
Solving Internal Forces of Piles of Jointless Bridges under the Action of Temperature Using Ordinary Differential Systems
New Knowledge in the Field of Reduction of Shear Stress in the Foundation Structures of Concrete or Masonry Structures
Verification of the Feasibility and Load Carrying Capacity of Models of Bored Concrete Piles
Study of the Cracking Resistance Assessment of Concrete Based on the Anti-Cracking Safety Coefficient Method
Optimization Inversion of the Micro-Properties of Bonded Particle Model in PFC Based on the Asynchronous Particle Swarm Algorithm
Physical Model Testing of Wind Effect on the High-Rise
E???rimental Study of Aerodynamic Loads on High-Rise Buildings
The Research of Waterproof Used on Mudstone
Realization of Optional Method of Determining the Concrete's Freeze-Thaw Resistance with Help of Dilatometer
The Research on the Strength of Cement Mortar with Different Particle Size of Waste Glass Powder
Comparative Analysis of Pile Joints
Chapter 5: Fluid Mechanics, Heat Transfer
Development and Evaluation of Nanofluid Heavy-Duty Coolant
Structure Optimization of Open Turbine Type Agitator
Heat Transfer Simulation of Floor Structural Layer and its Optimization of the Main Parameters
Experimental Investigation on Viscosities of Cu-H2O Nanofluids
Experimental Investigation on Surface Tension of Water-Based Graphene Oxide Nanofluids
Steady State Thermal Behaviour of Ceramic Wick Structure for Application in Two Phase Heat Transfer Devices
Metallic Mesh as Capillary Structure Applied in Heat Pipe Heat Exchanger for Heat Recovery
Heat Sink Cooling Fan and Rotation Speed Effect Analysis on Heat Dissipation of High Power GaN LED Package
Heat Slug Material Variation Analysis on Thermal Dissipation of High Power LED
Thermal Stress Comparison on Copper and Gold Wire Bonded on Aluminium Bondpad
Application of Different Conductive Substrate Materials for Heat Transfer Enhancement in Cooling of Electronic Components
Thermal Simulation Analysis of High Power LED with Varied Heat Sink Fin Design
Convection Condition Variation Analysis on Thermal Dissipation of High Power Single Chip LED
Copper Based Heat Slug Structure Variation Analysis on Heat Dissipation of High Power LED
Heat Dissipation Simulation Analysis of High Power LED via Heat Slug Geometry Variation
Chapter 6: Strength of Materials, Accidents, Corrosion
A Simulation Strategy on the Quasi-Static Axial Crushing Process of Composite Tubes Based on LS-DYNA
Reinforcement Possibilities of Round Timber Bolted Joints
Experimental Research on Strengthening and Fastening for Thick-Section Aluminium Alloy Bolted Joints
The Fire Taking Cotton Flame Retardant Fabric Style Test and Analysis
Research on Compression Performance of Variety Cashmere Sweaters
Study on Preparation and Properties of APP Filled Flame Retardant Silicone Rubber Composites
Inverse Multiquadrics with Optimal Shape Parameter for Stress Analysis of Functionally Graded Plates
Thermal Decomposition Conditions of Emulsion Matrix in the Emulsifier
Enlightment of "May 20" Explosion Accident
"321" Incident Iron Ions Characteristics and Catalytic Mechanism of Thinking
Deflagration to Detonation Transition of Explosives without the Effects of Shock Waves
Effect of Split-Sleeve Cold Expansion on the Fatigue Life of 7050-T7451 Aluminum Alloy
An Experimental Study on Anchor Performance of Bare CFRP Tendons with Bond Type Anchor
Research of Directional Stress Distribution on the Fully Plastic Bulged Pressure Hull
Comparison of Bond Strength of Silicon-Silica and Silicon-Pyrex in Wafer Bonding
Anodic Bonding of Silicon-Pyrex and Silicon-Soda Lime Glass at Room Temperature
Study on Viscosity Evaluation of Foamed Epoxy Asphalt
Vibration of Laminated Composite Plates by Generalized Multiquadrics with Optimal Shape Parameter and Exponent
Shape Parameter Optimization of Inverse Multiquadrics Radial Basis Function for Vibration of Laminated Composite Plates
Silicon Doped Boron and Glass Based Surface Bonding Strength Analysis via Anodic Bonding Approach
Failure Analysis and Precaution of NPN Transistors G3G33A
Chapter 7: Films, Surface Analysis, FPGA and ROM
Effect of the La3+-Doping Concentration on the Properties of TiO2 Thin Films by Sol-Gel Process
The Nano Tungsten Thin Film and its Contacting Property with Aluminium Electrodes
Out-of-Plane Thermal Conductivity of Silicon Thin Film Doped with Germanium
Superhydrophobic Polyimide via UV Photo-Oxidation and Fluoroalkyl Silanization: Changes in Surface Chemistry
Ambient Temperature Based Thermal Aware Energy Efficient ROM Design on FPGA
FPGA Based Low Power ROM Design Using Capacitance Scaling
Theoretical Investigation of Carbon Atom Adsorption and Diffusion on the Surfaces of Cu
Microstructure and Wear Resistance of Nanostructure WC Composite Coatings Prepared by Argon Arc Cladding Injection
Research on Fabrication of TaN Thin Film Resistors by Using Light Field Mask Method for Microwave Circuits
Chapter 8: Machine Parts and Mechanisms of Technological Equipment, Control and Automation
Recognition and Segmentation Method of Adhering Bars Based on Support Vector Machine
Development of a Control System of Testing Machine for Rock Breaking Based on Single-Chip Microcomputer
The Preliminary Study on Wheel-and-Rail Dynamical Model of High-Speed Train
Improving Efficiency and Enhancing Productivity in Transporting Fertilizers by Using Conveyor Belt Cleaners
Utilization of Waste Materials from Industrial Processes of a Brazilian Sugarcane Mill for Energy Production
Active Control of Structural Sound Radiation in an Acoustic Enclosure Using Distributed Point Force Actuators
Control Law and Simulation Analysis of Vertical Take-Off and Landing Stage of Tilt Rotor Aircraft
Non-Linear PID Controller Parameter Optimization of Vertical Take-Off and Landing Stage for Tilt Rotor Aircraft
Study on Multi-Objective Optimization of Hybrid Flow Shop Scheduling Problem
Carbon Nanotubes as a Nonlinear Buckled Beam for Nanoelectromechanical Systems
Chapter 9: Sensors and Measurement
A Silicon Semiconductor Temperature Sensor Applied for RFID Tag
Design of NFC Tag Loop Antenna Based on PCB Material
Velocity Correction of Total Focusing Method and its Application to Ultrasonic Inspection of Composite Laminate
A Label-Free Biosensor Based on Nanoscale Porous Silicon Thin Film for Tuberculosis Detection
The Modern Current Sensors of Synthetic Magnetic Resin Part 3 - Transmission Characteristics and Design of the Sensor Amplifier
STIPA Method in Public Adress Sound Systems and Voice Alarm Systems Part 1: The Theoretical Basis and the Reference Speaker
STIPA Method in Public Adress Sound Systems and Voice Alarm Systems Part 2: Conversion Curves and Bandwidth Effect
The Modern Current Sensors of Synthetic Magnetic Resin Part 2 - AC Current Sensor up to 2 000 amps
Chapter 1: Behavior and Characterization of Materials
Preparation and Structure of a Novel PS/Fe3O4 Nanochain
Synthesis and Characterization of Au/Fe3O4 Nanocomposite
Design of Cylindrical Metamaterial Invisible Cloak with Non-Singular Electromagnetic Tensors
Morphology and Crsytallization Control of Multifunctional GdPO4:Eu Nanostructures by Hydrothermal Preparation
Deflagration of Emulsion Explosive
Emulsion Explosives Containing Catalytic Metal Ion
Stability Test of Emulsion Matrix in the Emulsifier
Enhance the Power Capability of TaN Thin Film Resistor by Improving Processes
Study on Low TCR TaN Thin Film Resistors by D.C. Magnetron Sputtering
Application of Dark Field Model of OM in Quantitative Detection of Strengthen Phase in Beryllium Bronze
Study of UV Irradiation on Behavior of NBR Rubber from Oil Seal
Unusual Properties of Anisotropic Magnetodielectric Metamaterials
Application of Nanocomposite Track Membranes for Electron Microscopy Samples Preparation
Magnetic Property of Ni-Doped Bi5Ti3FeO15 Multiferroic Ceramics
Effect of High Pressure Treatment and Synthesis on Multiferroic Properties of 0.9BiFeO3-0.1SrTiO3 Ceramics
Reinforcing Epoxy Resin with Polydopamine-Coated Al(OH)3: A Biomimetic Method to Constructing Organic-Inorganic Hybrid Materials
Optimization of SDC Interlayer for YSZ-Based IT-SOFCs
Ce-Ti-MoOx Prepared by Sol-Gel Method for Selective Catalytic Reduction of NO with NH3
Chapter 2: Material Processing
Experimental Correlation between Metallurgical Parameters, Hardness and Drilling Force and Moment of Al-Si Alloys
The Effection of Discharge Current on Hydrogen Plasma in the Cascaded Arc
Graded Transitions Homogeneity for Ti-50.8%Ni Processed by ECAP
Effects of Cu/Ba Ratio in Precursor on MOCVD-Deposited YBa2Cu3O7-x Films on YYC Buffered Ni-W Alloy Tape
Thermal Cycling Simulation during Remelting Process of the Steel ASTM A743-CA6NM
Extracted from Actinidia Arguta of Wild Fructification Polyphenols Optimization Conditions
Using of the Principle of Autogenous Crushing in the Production of Caustic Magnesia
A Study of Picosecond-Laser Drilling Technique in Ceramics
Welding of Aluminum to DP600 Steel Plates by Refill Friction Stir Spot Welding Process (Refill FSSW): Preliminary Results
The Effect of Laser Processing Area on Nested-Circle Drilling Method
Application of Genetic Algorithm in Cutting Parameter Optimization
A Mechanistic Model for End Milling Cutting Forces in Brittle Porous Material
Evolution of Microstructure in Semi-Solid of Al-2wt%Si-0.5wt%Mg and Al-4wt%Si-05wt% Alloys during Isothermal Holding
Chapter 3: Heat Treatment of Metals
Study on the Heat Treatment Process by Using Residual Heat after Forging of Steel 40MnB
Influence of Aging Treatment on Microstructure and Properties of GH2132
Controlled Cooling of Rotary Furnace Shell
Analysis of the Significant Influence Factors of Spray Quenching Process
Hybrid Analytical-Numerical Analysis of SAE 4150 Alloy Steel Rods Cooling
The Betti Number of Prior Austenite Structure of Repeated Quenching Bearing Steels (JIS, SUJ2)
Effect of Hot Work on Hardness and Impact Toughness of Heat Treated Low Alloy Steels
Microstructure and Mechanical Properties of a Low-Carbon Steel Treated by One-Step Quenching and Partitioning Process
Chapter 4: Concrete, Rock, Civil Engineering
Testing of Pre-Stressing Masonry Wall with Using Different Thickness of Anchor Plates
Study on the Compatibility of Self-Compacting Concrete Thickener and the Cementitious Material
Solving Internal Forces of Piles of Jointless Bridges under the Action of Temperature Using Ordinary Differential Systems
New Knowledge in the Field of Reduction of Shear Stress in the Foundation Structures of Concrete or Masonry Structures
Verification of the Feasibility and Load Carrying Capacity of Models of Bored Concrete Piles
Study of the Cracking Resistance Assessment of Concrete Based on the Anti-Cracking Safety Coefficient Method
Optimization Inversion of the Micro-Properties of Bonded Particle Model in PFC Based on the Asynchronous Particle Swarm Algorithm
Physical Model Testing of Wind Effect on the High-Rise
E???rimental Study of Aerodynamic Loads on High-Rise Buildings
The Research of Waterproof Used on Mudstone
Realization of Optional Method of Determining the Concrete's Freeze-Thaw Resistance with Help of Dilatometer
The Research on the Strength of Cement Mortar with Different Particle Size of Waste Glass Powder
Comparative Analysis of Pile Joints
Chapter 5: Fluid Mechanics, Heat Transfer
Development and Evaluation of Nanofluid Heavy-Duty Coolant
Structure Optimization of Open Turbine Type Agitator
Heat Transfer Simulation of Floor Structural Layer and its Optimization of the Main Parameters
Experimental Investigation on Viscosities of Cu-H2O Nanofluids
Experimental Investigation on Surface Tension of Water-Based Graphene Oxide Nanofluids
Steady State Thermal Behaviour of Ceramic Wick Structure for Application in Two Phase Heat Transfer Devices
Metallic Mesh as Capillary Structure Applied in Heat Pipe Heat Exchanger for Heat Recovery
Heat Sink Cooling Fan and Rotation Speed Effect Analysis on Heat Dissipation of High Power GaN LED Package
Heat Slug Material Variation Analysis on Thermal Dissipation of High Power LED
Thermal Stress Comparison on Copper and Gold Wire Bonded on Aluminium Bondpad
Application of Different Conductive Substrate Materials for Heat Transfer Enhancement in Cooling of Electronic Components
Thermal Simulation Analysis of High Power LED with Varied Heat Sink Fin Design
Convection Condition Variation Analysis on Thermal Dissipation of High Power Single Chip LED
Copper Based Heat Slug Structure Variation Analysis on Heat Dissipation of High Power LED
Heat Dissipation Simulation Analysis of High Power LED via Heat Slug Geometry Variation
Chapter 6: Strength of Materials, Accidents, Corrosion
A Simulation Strategy on the Quasi-Static Axial Crushing Process of Composite Tubes Based on LS-DYNA
Reinforcement Possibilities of Round Timber Bolted Joints
Experimental Research on Strengthening and Fastening for Thick-Section Aluminium Alloy Bolted Joints
The Fire Taking Cotton Flame Retardant Fabric Style Test and Analysis
Research on Compression Performance of Variety Cashmere Sweaters
Study on Preparation and Properties of APP Filled Flame Retardant Silicone Rubber Composites
Inverse Multiquadrics with Optimal Shape Parameter for Stress Analysis of Functionally Graded Plates
Thermal Decomposition Conditions of Emulsion Matrix in the Emulsifier
Enlightment of "May 20" Explosion Accident
"321" Incident Iron Ions Characteristics and Catalytic Mechanism of Thinking
Deflagration to Detonation Transition of Explosives without the Effects of Shock Waves
Effect of Split-Sleeve Cold Expansion on the Fatigue Life of 7050-T7451 Aluminum Alloy
An Experimental Study on Anchor Performance of Bare CFRP Tendons with Bond Type Anchor
Research of Directional Stress Distribution on the Fully Plastic Bulged Pressure Hull
Comparison of Bond Strength of Silicon-Silica and Silicon-Pyrex in Wafer Bonding
Anodic Bonding of Silicon-Pyrex and Silicon-Soda Lime Glass at Room Temperature
Study on Viscosity Evaluation of Foamed Epoxy Asphalt
Vibration of Laminated Composite Plates by Generalized Multiquadrics with Optimal Shape Parameter and Exponent
Shape Parameter Optimization of Inverse Multiquadrics Radial Basis Function for Vibration of Laminated Composite Plates
Silicon Doped Boron and Glass Based Surface Bonding Strength Analysis via Anodic Bonding Approach
Failure Analysis and Precaution of NPN Transistors G3G33A
Chapter 7: Films, Surface Analysis, FPGA and ROM
Effect of the La3+-Doping Concentration on the Properties of TiO2 Thin Films by Sol-Gel Process
The Nano Tungsten Thin Film and its Contacting Property with Aluminium Electrodes
Out-of-Plane Thermal Conductivity of Silicon Thin Film Doped with Germanium
Superhydrophobic Polyimide via UV Photo-Oxidation and Fluoroalkyl Silanization: Changes in Surface Chemistry
Ambient Temperature Based Thermal Aware Energy Efficient ROM Design on FPGA
FPGA Based Low Power ROM Design Using Capacitance Scaling
Theoretical Investigation of Carbon Atom Adsorption and Diffusion on the Surfaces of Cu
Microstructure and Wear Resistance of Nanostructure WC Composite Coatings Prepared by Argon Arc Cladding Injection
Research on Fabrication of TaN Thin Film Resistors by Using Light Field Mask Method for Microwave Circuits
Chapter 8: Machine Parts and Mechanisms of Technological Equipment, Control and Automation
Recognition and Segmentation Method of Adhering Bars Based on Support Vector Machine
Development of a Control System of Testing Machine for Rock Breaking Based on Single-Chip Microcomputer
The Preliminary Study on Wheel-and-Rail Dynamical Model of High-Speed Train
Improving Efficiency and Enhancing Productivity in Transporting Fertilizers by Using Conveyor Belt Cleaners
Utilization of Waste Materials from Industrial Processes of a Brazilian Sugarcane Mill for Energy Production
Active Control of Structural Sound Radiation in an Acoustic Enclosure Using Distributed Point Force Actuators
Control Law and Simulation Analysis of Vertical Take-Off and Landing Stage of Tilt Rotor Aircraft
Non-Linear PID Controller Parameter Optimization of Vertical Take-Off and Landing Stage for Tilt Rotor Aircraft
Study on Multi-Objective Optimization of Hybrid Flow Shop Scheduling Problem
Carbon Nanotubes as a Nonlinear Buckled Beam for Nanoelectromechanical Systems
Chapter 9: Sensors and Measurement
A Silicon Semiconductor Temperature Sensor Applied for RFID Tag
Design of NFC Tag Loop Antenna Based on PCB Material
Velocity Correction of Total Focusing Method and its Application to Ultrasonic Inspection of Composite Laminate
A Label-Free Biosensor Based on Nanoscale Porous Silicon Thin Film for Tuberculosis Detection
The Modern Current Sensors of Synthetic Magnetic Resin Part 3 - Transmission Characteristics and Design of the Sensor Amplifier
STIPA Method in Public Adress Sound Systems and Voice Alarm Systems Part 1: The Theoretical Basis and the Reference Speaker
STIPA Method in Public Adress Sound Systems and Voice Alarm Systems Part 2: Conversion Curves and Bandwidth Effect
The Modern Current Sensors of Synthetic Magnetic Resin Part 2 - AC Current Sensor up to 2 000 amps