Advanced Materials and Engineering Materials II

<ul><li>Preface, Committees and Sponsors</li><li>Chapter 1: Advanced Materials and New Materials</li><li>Blue Upconversion Luminescence from Phosphor Tm³⁺/Yb³⁺ Co-Doped Gd₂Mo₃O₉</li><li>Microstructure and Magnetic Properties of Fe-Si-Al Soft Magnetic Composite</li><li>Preparation and Purification Properties of Poly(Vinyl Alcohol) Nano-Fibers Based Sandwich Structure Material</li><li>Investigation for the Fracture Process of WC_p/Cu Functionally Graded Materials under Three-Point-Bending</li><li>Properties and Performance Analysis of Woven Roving Composite Laminates for Automotive Panel Board Applications</li><li>Study on Synthesis of Cyclotriphosphazene Containing Aminopropylsilicone Functional Group as Flame Retardant</li><li>Synthesis of SiO₂/CeO₂ Nanopaticles with Core/Shell Structure and Their Polishing Performance</li><li>Design, Synthesis and Biological Activity Evaluation of Novel N-Acylation Substituted Isatin Derivatives</li><li>TiO₂ Immobilized in RPF-AA Fiber for Photocatalytic Degradation of Low Concentration Methylene Blue in Aqueous Solution</li><li>Study on the ZnO-B₂O₃-SiO₂ Glass-Ceramic with DTA, XRD and SEM</li><li>A Review on the Methods of Improving Fiber Distribution of Engineered Cementitious Composites (ECC)</li><li>The Influence of Tread Material Oil Aging on Tire Performance</li><li>Room Temperature Magnetocaloric Effect of the Co_x(MnSb)_1-x Compounds</li><li>Microstructure and Electrochemical Behavior of Sm_0.5Sr_0.5CoO₃ Deposited by Solution Precursor Plasma Spraying</li><li>Characteristics of BiFeO₃ Thin Films on a LaAlO₃Substrate by RF Sputtering</li><li>Magnetic Concentration Phase Transitions in Ultrathin Films</li><li>Synthesis and Characterization of Surface Modified Red Pigment 48:2 for Electrophoretic Display</li><li>Relationship between Life, Load and Rotation Speed of UHMWPE Bearing under Dry Rolling Contact Fatigue</li><li>Mechanical Properties at High Temperatures and Microstructures of a Nickel Aluminum Bronze Alloy</li><li>Effect of PTFE Retainer on Friction Coefficient in Polymer Thrust Bearings under Dry Contact</li><li>Sintering and Dielectric Properties of Sr-Rich Barium Strontium Titanate (BST) Ceramics Fabricated by a Mixed-Phase Method</li><li>Application of Photocatalytic Concrete Paint and its Effect of Decomposing Vehicle Exhaust</li><li>Phase-Change Materials and Building Energy Saving</li><li>Second-Order Non-Linear Optical Properties of Y-Type S-Triazine Based Derivatives</li><li>Developing a Wearable Multifunctional Composite Component</li><li>Effect of Dynamic Strain Aging on the Mechanical Performance in Ti/STS439 Clad Materials</li><li>Preparation of Carbon Fiber Reinforced SiC Matrix Composites by PIP Process</li><li>Interfacial Microstructure of Diffusion-Bonded Cu/Cu-Ag/Al Hybrid Alloy</li><li>Effect of Size on Average Molecular Weight of Poly(Methyl Methacrylate) Micropattern during Hot Embossing</li><li>Mechanical and Biological Characteristics of Electrospun PCL Meshes - the Influence of Solvent Type and Concentration</li><li>Evaluating the Properties of an Alginate Wound Dressing for Skin Repair</li><li>Ageing Effect on Mechanical Properties of Machined Nanostructures</li><li>Density Functional Theory Studies of Substitutionally Si-Doped Single-Walled Carbon Nanotubes</li><li>Synthesis of SnO₂ Nanotubes as High Performance Energy Storage Material for Photocathodic Protection of Metals</li><li>Surface Morphology in Milling Multidirectional Carbon Fiber Reinforced Polymer Laminates</li><li>Studies on the Bioceramic Coating on Titamium Substrate Including Silicon and Calcium by Micro-Arc Oxidation and Osteoblast's Adhesion and Proliferation on the Coating</li><li>PCL and PCL/PLA <i>Scaffolds</i> for Bone Tissue Regeneration</li><li>Quantum Cutting Downconversion in Tb³⁺,Yb³⁺ Codoped Sr₃AlO₄F Phosphor</li><li>Elastic Ply Damage Mechanics Modeling of Glass/Epoxy Laminated Composite</li><li>Chapter 2: Engineering Materials Research</li><li>Investigation on Transmittance and Uniformity of Light Diffuser Plate of Filling Coefficient of Microstructure</li><li>The Yield Effect on Soil Improver and Straw Mulch Coupling in Inland Saline Areas</li><li>Application of HVFA Concrete in Massive Structure</li><li>Luminescence Properties and Energy Transfer from Eu²⁺ to Tb³⁺ in Sr₅(PO₄)₃F Phosphor</li><li>Synthesis and Characterization of SrSO₄:Sm³⁺ Phosphor with Hierarchical Structures</li><li>Design and Analysis of Optical-Communication-Band Sub-Wavelength Grating Polarizer</li><li>The Effect of Spin-Orbit Coupling on the Electronic Structures and Half-Metallicity of Heusler Compounds: V₂ReZ (Z=Al, Ga, ln)</li><li>The Effects of Initiator Content on Sago <i>(Metroxylon rottb.)</i> Starch-G-PAN Hydrogel</li><li>Study on the Hydrolysis of Pollen in Pure Water under Microwave Irradiation</li><li>Study on a Structure of 2,6-Pyridine-Dicarboxylic Acid Lead, Pb(C₇H₃NO₄)</li><li>Application and Research on Luminescent Coating in Interior Design</li><li>Microstructure and Texture Characterstics of a Near-Alpha Titanium Alloy Tube</li><li>Characterization of Contact Resistance between Carbon Nanotubes Film and Metal Electrodes</li><li>Analysis of the Effect of Temperature on Thermal Conductivity of the Insulation Block Made from Secondary Raw Materials</li><li>Experimental Investigations on the Characteristics of Biomass and Coal-Biomass Fuel Briquettes</li><li>Medium Optimization for Active Substance Production of <i>Streptomyces albo?avus</i> TD-1 Using Response Surface Methodology</li><li>Molecular Weight and its Distribution of PET Depolymerization Catalyzed by Zn(Ac)₂ under Microwave Irradiation</li><li>Experimental Research on Properties of Low-Density Foaming Concrete</li><li>Numerical Simulation and Monitoring of Mass Concrete Wall Temperature Field</li><li>Photo Polymerization of Thiol-Hyperbranched Polysilazanes</li><li>
<i>In Situ</i> Modulation Excitation IR Study on the Dominant Product of Pt-Catalyzed Aromatic Ketone Hydrogenation</li><li>Numerical Simulation of the Transient Temperature Field during Gas Quenching</li><li>Synthesis of sp³C1-Bridged Constrained Geometry Complexes and their Application for Copolymerization of Ethylene and 1-Octene</li><li>Rheological Properties of Polysulfonamide Spinning Solutions with Higher Ratios of p-Phenylene Segments</li><li>Optimization of Micro-Arc Oxidation Electrode Structure by Finite Element Analysis</li><li>The Study on the Synthesis and Luminescent Properties of the Phosphor La₂O₃: Dy³⁺</li><li>Investigation of Hot Deformation Characteristics of AISI 4340 Steel Using Processing Map</li><li>Synthesis and Electrochromic Properties of Crystalline 3D Urchin-Like Nanostructures</li><li>Cyclic Stress-Strain Response and Dislocation Configuration of a Beta Phase Containing TiAl Alloy during Isothermal Fatigue Tests under Different Strain Rate</li><li>Mechanical Properties and Microstructure of Cu-Ni-Zn/Cu-Cr/Cu-Ni-Zn Clad Plate Processed by High Pressure Torsioning (HPT)</li><li>Solvothermal Synthesis and Detailed Analysis of Hydroxyapatite Nanostructure</li><li>Research on the Electro-Exploding Mechanism of Semiconductor Bridge</li><li>Wear Resistance of Graphite / Aluminium Composites that Prepared by Stirring Casting</li><li>Coordination of Polyacrylic Grafted Polytetrafluoroethylene Fiber with Fe (III) Ions in Aqueous Solution</li><li>Adsorption of Zearalenone by Montmorillonite</li><li>Molecular Dynamics Simulation of Structural Changes of Ag₉₆₅ Clusters during Freezing</li><li>Study of the Erosion-Corrosion Behavior of P110, N80 and VM140 Steel in 3.5wt.%NaCl Solutions with Sand</li><li>Crystal Structure of Ytterbium Chloride Phenanthroline: [YbCl₄]?[C₁₂H₈N₂]?(H₂O)</li><li>Effect of Transition Metal on the Thermal Degradation of Cotton Cellulose Modified with THPC</li><li>Analysis on the Non-Arrhennius Life Prediction Method of Rubber</li><li>The Application of Large Particle Size Hot Mix Asphalt Macadam Roadbase Structure in the Maintenance Overhaul Engineering</li><li>Magnetic Dual-Phase State of Superparamagnetic Particles in the Field of Mechanical Stresses</li><li>Experimental Study on Bonding Interface between CFRP and Concrete under Fatigue Load</li><li>Observation of Wear on PEEK-PTFE Hybrid Radial Bearings</li><li>Surface Profile Observation of PTFE Thrust Bearings under Rolling Contact Fatigue in Water</li><li>Study on the Flow- Induced Corrosion of P110 Oil Tube with an Electrochemical Method</li><li>Experimental Research of Foam Concrete with Different Fly Ash Level</li><li>Research Status and Prospect of Constitutive Relation for Concrete after Freeze-Thaw Damage</li><li>Surface Morphology Investigation of Poly(ether ether ketone) Immobilized with Heparin and Bovine Serum Albumin</li><li>Analysis of Relationship between Porosity and Roughness of Surface Based on Fractal Model</li><li>Two Dimensional Photonic Crystal Biosensors</li><li>Flex Fatigue of Side Emitting Optical Fiber</li><li>Experimental Research of Foaming Concrete Performance at Different Water Temperature</li><li>Experimental Research of Foaming Concrete Performance with Different Ash Calcium</li><li>Influence of Load and Rotation Speed on Life of PPS Radial Bearings under Water Lubricant Conditions</li><li>Environmental Assessment of Production of Thermal Insulation Block from Secondary Raw Materials</li><li>Chapter 3: Materials Processing Technology</li><li>Research on the Super Rapid Strength Repairing Material Effects Resistance to Water Damage Performance of Cement Stabilized Macadam</li><li>Isothermal Transformation of Wustite for Low Carbon Micro-Alloyed Steel</li><li>The Research of the Application of Smart Coatings on Architectural Ornaments</li><li>Effects of Niobium and Titanium on the As-Cast Microstructure of Cr₈Mo₂VSi Cold Work Die Steel</li><li>Research on Sol-Gel Transition Process of Gelatin</li><li>Feasibility Study for Copper/Zirconium Oxides as Oxygen Carrier in Chemical Looping Air Separation (CLAS)</li><li>Study on the Preparation and Catalytic Property of Sulfonated Ordered Mesoporous Carbon</li><li>Research on Dynamic Recrystallization Behavior of 20CrMo Alloy Steel during Hot Deformation</li><li>Meshless Modeling of the Breakage Process of a Coal Prism within Vertical Roller Mills</li><li>Development and Application of Prediction Model for End-Point Manganese Content in Converter Based on Data from Sub-Lance</li><li>Effect of Sb Substitution on the Crystal Structure and Multiferroic Properties of BiFeO₃</li><li>The Pozzolanic Activity of the Coal Gauge and its Evaluation</li><li>Effect of Feedstock Type on Microstructure and Polarization of Plasma Sprayed LSM Cathode for Solid Oxide Fuel Cells</li><li>Preliminary Research on Brazability of SiC Particulate Reinforced Aluminium-Based Composites</li><li>The Impact of Porphyrin Meso-Position Steric Effect on Porphyrin Density on TiO₂ Surface of DSSC</li><li>Calculating of the Beating-Up Force for 3D Weaving</li><li>Kinetics and Thermodynamic Investigation of Phosphate Adsorption on AlCl₃ Modified Palygorskite</li><li>Preparation of Hydrotalcites Derived Ni/Co/Cu/Fe Nanocomposite Oxides and their Catalytic Activities for Thermal Decomposition of Ammonium Perchlorate</li><li>The Research of Konjac Glucomannan Fracturing System</li><li>OPTIMALMOULD | Cooling System Influence in Injection Moulding Cycle Time Optimization</li><li>Finite Element Simulation on Tire Rubber Extrusion Process</li><li>Influence of Forming Velocity on Service Performance of Resistance Wall Structural Die</li><li>Modeling and Simulation of High Speed Intermittent Cutting Based on the Finite Element Method</li><li>Choice of Materials and Application of New Materials in Industrial Design</li><li>Separation Test of Copper-Zinc-Sulfur Mixed Concentrate in Kazakhstan</li><li>Study on Melting Properties of CaO-Al₂O₃-SiO₂-MgO System Calcium Aluminate Flux</li><li>Effect of Spark Plasma Sintering Temperature on Microstructures and Properties of Copper-Diamond Composites</li><li>Study on the Formation Mechanism of Micro-Arc Oxidation Layer in Aviation</li><li>Study on the Surface Roughness of Titanium Alloy Machined by WEDM</li><li>Technical Principle and Working Properties of Sludge Dredging by Airlift Water Jet</li><li>Arbitrary Curvature Radius of the Optical Parts Precision Polishing Technology</li><li>Experiment Research on Preparation Pigment Type Magnetic Iron Oxide Powder Utilizing Magnetic Separated Slag</li><li>Thermal Stress Analysis for Local Heating Variable Cross-Section Roll Forming</li><li>Finite Element Analysis and Fracture Forecast of U Channel Flexible Roll Forming</li><li>Analytical Investigation on the Aging Process of Vegetable Insulating Oil</li><li>The Controlled Powders Morphology of Bismuth Niobium Titanate Depending upon the Isothermal Annealing</li><li>Sapphire Substrate Ring-Belt Magnetorheological Polishing Processing</li><li>Research on Flotation Mechanism of Quartz Using Magnesium Ion as Activator</li><li>Effect of Forced Convection on Grain Refinement of S32205 Duplex Stainless Steel</li><li>Selection of Process Parameters for Laser Assisted Machining of Al₂O₃ Ceramics</li><li>Comparative Study of Different Types of Flashes on the Flange Open-Die Forging</li><li>Effect of Premelted Calcium-Magnesium-Aluminate Flux on Magnesia Carbon Brick</li><li>Effect of Microalloying on Structures and Properties of Aluminum Alloy</li><li>Controlled Synthesis of Calcium Carbonate Crystals with Superstructure on the Templates of Bamboo Leaves /Mg²⁺</li><li>Chapter 4: Other Engineering Solutions for Manufacturing</li><li>3-D CFD Modeling the Straight Blade Vertical Axis Wind Turbine</li><li>The Design of the Mechanical Heart Valve by Using the Parametric Method</li><li>Hardware System Design of the Control System for Three Dimensional Variable Cross-Section Roll Forming</li><li>Analysis on Factors to Cause the Price Change of Building Materials</li><li>Monitoring of Blast Furnace Hearth Erosion</li><li>A Design Method Using SOA Paradigm for Mobile Cloud Computing Services over Multimedia Convergence Networks</li><li>Research on Auto Matching of Measuring Points Data with CAD Model for Hull Blocks</li><li>Application of Analytic Hierarchy Process in the Steel Industry</li><li>Experimental Device of Drilling String Dynamics in Horizontal Well and its Application</li><li>Research on Experiment Modal Parameters Identification of Parallel Manipulator</li><li>A Reconfigurable MES Model Based on Hierarchy</li><li>Dynamic Simulation Analysis of the Vibratory Sinking Piling System Based on AMESim</li><li>Optimization of Multiresponse Performance Measure in Slider-Rocker Compliant Mechanism Using Fuzzy-Taguchi Method</li><li>A Method to Measure the Station of Artificial Mechanical Heart Valves</li><li>Research on the Fuzzy Control for Vehicle Semi-Active Suspension</li><li>The Influence of Material Optical Properties on Temperature Distribution in an Automotive Lamp</li><li>Underwater Wet Weld Seam Tracking Based on Passive Visual Sensor</li><li>Characterization of Metal-Semiconductor Schottky Diodes and Application on THz Detection</li><li>Analysis on the Incompleteness of Moral Hazard Model</li><li>Graph-Theoretic Models for the Module of Safe Planning for Control Systems of Mobile Robots</li><li>The Application Research of Six-Axis Force Sensor Used by Trans-Femoral Prosthesis</li><li>Structure Design of a Novel Triaxial Micro-Accelerometer</li><li>The Comparative Model Analysis of Electronic Button-Sewing Machine Shell Based on Simulation and Experiment</li><li>Cybernetics in Planning and Design</li><li>Research on the Relationship between the Transaction Cost and the Corporate Governance</li><li>System Dynamics Mechanism Analyses on Building Materials Enterprise Factoring Risk</li><li>Research on Co-Branding Strategy in New Materials Industry</li><li>Bio Inspired Algorithms for Injection Moulding Optimization</li><li>Functionally Graded Structures through Building Manufacturing</li><li>Nonlinear Natural Frequencies of Rotating Composite Thin-Walled Beam with Geometrical Nonlinear</li><li>Estimation and Analysis for the Fatigue Life of Rail Joint Bolt</li><li>Design of Cylinder Positioning System Based on Proportional Valve</li><li>Analysis and Judgment of the Local Loss Based on the Entropy Gradient</li><li>Mapping Matrix of Variable Cross-Section Roll Forming Based on Visual Detection</li><li>Research on Mars Surface Image Visual Feature Extraction Algorithm</li><li>Reconfigurable Control Software for Additive Manufacturing Machines</li><li>A Quantitative Analysis of Lake Tourism Resource Value Based on AHP-Fuzzy Comprehensive Evaluation Method</li><li>Reliability Enhancement Test of Detection and Control Unit</li><li>Numerical Study of Droplet Formation Time on Solid Surface</li><li>Dynamic Target Tracking Based on Particle Filter in Actual Environment</li><li>Sea Bottom EM Field of M2 Tidal to Probe Upper Mantle Conductivity</li><li>Research on Accounts Receivable Financing Model Based on E-Commerce Platform</li><li>Research on Electronic Equipment Fault Diagnosis Expert System Based on Embedded Linux</li><li>A Multi-Tip Turning Tool Structure for Thin and Long Pieces</li><li>Research on Dynamic Characteristics for Large Span Cable-Stayed Suspension Bridges with CFRP Cables</li><li>Research on the Parametric Design System for the Excavator Working Device</li><li>COM Component Based on Matlab Algorithm for Speckle Processing</li><li>Design and Analysis of a Novel Wavelength-Selelctive Waveguide Photodetector</li><li>An Ultrasonic Motor Precision Adjustable Speed Scheme Study and Analysis</li><li>Simulation of Airflow Motion in Jet Nozzle with Different Geometric Parameters</li><li>Modeling, Analysis and Simulation of Bluetooth Process Based on SystemView</li><li>The Motor Fault Diagnosis Based on Neural Network and the Theory of D-S Evidence</li><li>Study on MR Imaging of Endothelial Progenitor Cells Labeled with the Complex of Super Paramagnetic Iron Oxide and Transfection</li><li>Capillary Effects during Droplet Formation on the Solid Surface</li><li>Design for Laser Beam Cutting Machine Tools Integrated NC System</li><li>A Study on Fault Diagnosis of Gears Based on Local Mean Decomposition Method</li><li>Soil-High-Rise Building Group Dynamic Interaction Considering Site Effect</li><li>Self-Learning of Robots and the Model of Hamiltonian Path with Fixed Number of Color Repetitions for Systems of Scenarios Creation</li><li>Numerical Simulation for Effects of Running Surface Profile Structure in Piston Ring Group on Blow-By and LOC</li><li>Mass Customization in the Tourism Industry of China</li><li>Application of AHP in Material Selection in Slope Protection Project in Riverway</li><li>Electronic Equipment Fault Diagnosis Expert System Based on PDA/HPC</li><li>Study of Milling Thickness and Milling Force on Two Directions Ultrasonic Vibration Assisted Milling</li><li>Optimization of Electrode Structures of PZT Acoustic Energy Harvesters Fabricated on SOI Substrate</li><li>A Magnetic-Assistance System as a Super Finishing Following Turning Machining</li><li>Analysis of Coal Gangue Pollution Control Technology</li></ul>