
Contribution of Metallography to Solving Production Problems
Selected, peer reviewed papers from the 13th Conference on Contribution of Metallography to Solving Production Problems, June 17-19, 2014, Lázne Libverda, Czech Republice
Trans Tech Publications Ltd (Publisher)
Published on 20. June 2015
Book
Paperback/Softback
268 pages
978-3-03835-470-3 (ISBN)
Description
Collection of selected, peer reviewed papers from the 13th Contribution of Metallography to Solving of Production Trouble, June 17-19, 2014, Lazne Libverda, Czech Republic.
The 33 papers are grouped as follows:
I. Steels;
II. Alloys;
III. Surface Treatment and Powder Metallurgy;
VI. Welding and Creep Resistant Materials;
V. Methods of Research and Analyze;
IV. Failure Analysis
The 33 papers are grouped as follows:
I. Steels;
II. Alloys;
III. Surface Treatment and Powder Metallurgy;
VI. Welding and Creep Resistant Materials;
V. Methods of Research and Analyze;
IV. Failure Analysis
More details
Series
Language
English
Place of publication
Zurich
Switzerland
Target group
Professional and scholarly
Illustrations
Illustrations
Dimensions
Height: 240 mm
Width: 170 mm
Thickness: 13 mm
Weight
600 gr
ISBN-13
978-3-03835-470-3 (9783038354703)
DOI
10.4028/b-3mH2ry
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions

Josef Kasl | Dagmar Jandova
Contribution of Metallography to Solving Production Problems
Software
06/2015
Trans Tech Publications Ltd
€198.26
Shipment within 10-20 days

Josef Kasl | Dagmar Jandova
Contribution of Metallography to Solving Production Problems
E-Book
05/2015
Trans Tech Publications Ltd
€171.20
Available for download
Persons
Eds. Josef Kasl and Dagmar Jandová
Content
Preface, Organizing Committees and Acknowledgement
I. Steels
Various Approaches to Accelerated Carbide Spheroidization of 54SiCr Steel
Identification of Carbides in Sub-Zero Treated Vanadis 6 Ledeburitic Steel
Influence of Heat Treatment Conditions on Properties of High-Speed P/M Steel Vanadis 30
Microstructure of Tool Steel X37CrMoV5 after Cryogenic Treatment and its Effect on Wear Resistance
Influence of Annealing Temperature and Time on the Mechanical Properties of Selected Steels for Heavy Forgings
Effect of Sample Thickness on Slab Surface Zone Toughness in IF and Microalloyed Steels
II. Alloys
Novel Trends in the Development of Metallic Materials for Medical Implants
Materialographic Analysis of MAR M-247 Superalloy
The Influence of Ge on the Properties of Mg Alloys
The Influence of Oxygen on Mechanical Properties of Ti35Nb6Ta Alloy
Effect of Al Content and Heat Treatment on Microstructure of ZnAlCu Alloys
III. Surface Treatment and Powder Metallurgy
Dependence of NiTi Alloy Microstructure on the Conditions of Powder Metallurgy Production
Structure of Nanocrystalline Nickel Prepared by Powder Metallurgy
Utilization of Light Microscopy for the Evaluation of Fracture Toughness of Cemented Carbides
Corrosion Resistance of Inconel 625 and Austenitic Steel M41 after Laser Claddings
Microstructure of Cr2N-11Ag Nanocomposite Thin Film Deposited on Vanadis 6 Tool Steel
VI. Welding and Creep Resistant Materials
Structure Analyses of Experimental Welds Designed for Repair Welding of VVER 1000 Presssure Vessel
Laser Welding of High-Strength CP Steels: Dissimilar Welds
Heterogeneous Welded Joints (T23-T92; 15CH1M1F-P91)
Influence of Microstructural Changes in Creep Resistant Steel after Long-Term Creep Tests on the Shape of the Polarization Curves
Material Degradation of Steam Pipe Elbow after Long-Term Exposure
V. Methods of Research and Analyze
Metallographic Evaluation of Surface Integrity
Application of Stereological Relations for the Characterization of Porous Materials via Microscopic Image Analysis
Porosity Quatification of Cast Aluminium Alloys on Machined Surfaces Using Metallography and Eddy-Currents
Metallographic and Acoustic Analyses of Sintered Sliding Layers
IV. Failure Analysis
Assessment of the Causes of Indicated Defects in Forgings
Analysis of Coupling Segment of Belt Conveyor
Chain Segment Analysis
Analysis of Cracked Spring Washer for Sleeper-Rail Joints
Defects in Tool Steels for Dies
Failure Analysis of a 20 MW Turbine Rotor
Detection of Cracks in the Production of Shafts
Corrosion Resistance of Casings for Metal Detectors in Food Industry Made of Cr-Ni Stainless Steel
I. Steels
Various Approaches to Accelerated Carbide Spheroidization of 54SiCr Steel
Identification of Carbides in Sub-Zero Treated Vanadis 6 Ledeburitic Steel
Influence of Heat Treatment Conditions on Properties of High-Speed P/M Steel Vanadis 30
Microstructure of Tool Steel X37CrMoV5 after Cryogenic Treatment and its Effect on Wear Resistance
Influence of Annealing Temperature and Time on the Mechanical Properties of Selected Steels for Heavy Forgings
Effect of Sample Thickness on Slab Surface Zone Toughness in IF and Microalloyed Steels
II. Alloys
Novel Trends in the Development of Metallic Materials for Medical Implants
Materialographic Analysis of MAR M-247 Superalloy
The Influence of Ge on the Properties of Mg Alloys
The Influence of Oxygen on Mechanical Properties of Ti35Nb6Ta Alloy
Effect of Al Content and Heat Treatment on Microstructure of ZnAlCu Alloys
III. Surface Treatment and Powder Metallurgy
Dependence of NiTi Alloy Microstructure on the Conditions of Powder Metallurgy Production
Structure of Nanocrystalline Nickel Prepared by Powder Metallurgy
Utilization of Light Microscopy for the Evaluation of Fracture Toughness of Cemented Carbides
Corrosion Resistance of Inconel 625 and Austenitic Steel M41 after Laser Claddings
Microstructure of Cr2N-11Ag Nanocomposite Thin Film Deposited on Vanadis 6 Tool Steel
VI. Welding and Creep Resistant Materials
Structure Analyses of Experimental Welds Designed for Repair Welding of VVER 1000 Presssure Vessel
Laser Welding of High-Strength CP Steels: Dissimilar Welds
Heterogeneous Welded Joints (T23-T92; 15CH1M1F-P91)
Influence of Microstructural Changes in Creep Resistant Steel after Long-Term Creep Tests on the Shape of the Polarization Curves
Material Degradation of Steam Pipe Elbow after Long-Term Exposure
V. Methods of Research and Analyze
Metallographic Evaluation of Surface Integrity
Application of Stereological Relations for the Characterization of Porous Materials via Microscopic Image Analysis
Porosity Quatification of Cast Aluminium Alloys on Machined Surfaces Using Metallography and Eddy-Currents
Metallographic and Acoustic Analyses of Sintered Sliding Layers
IV. Failure Analysis
Assessment of the Causes of Indicated Defects in Forgings
Analysis of Coupling Segment of Belt Conveyor
Chain Segment Analysis
Analysis of Cracked Spring Washer for Sleeper-Rail Joints
Defects in Tool Steels for Dies
Failure Analysis of a 20 MW Turbine Rotor
Detection of Cracks in the Production of Shafts
Corrosion Resistance of Casings for Metal Detectors in Food Industry Made of Cr-Ni Stainless Steel