Technologies in Aviation Maintenance, Repair, and Overhaul Operations

Prediction of Process-Induced Distortion of Braided CFRP Composites Based on Effective Material Property and Cure Modeling.- Modeling and Simulation of Heavy-Lift Tethered Multicopter Considering Mechanical Properties of Electric Power Cable.- Composite materials in the aerospace industry: Some opportunities and challenges.- Application of laser distance meters for non-contact determination of aircraft weight and center of gravity.- Open-source tool for rotorcraft design.- Attitude at Altitude: Ethics and Flight Safety.- NOTAR Helicopter preliminary design app.- Energy and comfort in virtual aircraft passenger cabin section - Part I: Design of the Cabin and Hydrothermal Manikins.- Energy and comfort in virtual aircraft passenger cabin section - Part II: Three-dimensional airflow around hydrothermal manikins.- Using CFD studies effect of an air circulating tank on hydrodynamic performance of a hull.- Power Generation Sustainability in Aviation Ground-Based Maintenance, Rectification,Overhaul, Testing Operations.- Revolutionizing Aviation MRO Training: Exploring the Impact of Digitalization.- Energy and comfort in virtual aircraft passenger cabin section - Part III: Binaural mannequins.- Process structure proposal for the automation of aircraft maintenance planning.- Navigating the winds of change: case studies of the latest high-level research in the MRO industry.- Aircraft maintenance practices using virtual reality.- The new solution of air plasma spray for hardfacing.- Longitudinal motion control of a fully submerged hydrofoil craft using a neural network.- Research and development airboats for rescue works.- Numerical study on bubble growth and collapse near a solid wall with a gas-entrapping hole.- A study on propellers for airboats.- Mixing process effect in shear stiffening gels for aircraft.- The Importance of periodic measurement of vibration values to prevent CNC spindle tool runout in the aviation industry.- A comparative study of the force of shot for5.56mm assault rifles with different barrel lengths.- Study the influence of the presence of air in the hydraulic brake on its operation.- Fire detection in surveillance camera systems using a deep-learning-based approach.- Optimization of acoustic performance of double-layer absorbers based on cellular foams.- Performance of a micro wind turbine retrofitted with a prototype flow acceleration system at a typical Urban Site of Dhaka, Bangladesh.- Active noise control technology for Advanced Air Mobility applications.- Visualization on Supercritical/Transcritical CO2 Jet and Boundary Flow.- Nanocolloids: from basic experiment to applications.- Hungarian Drone Coalition: introduction to the Hungarian drone ecosystem and development strategy.- A model-driven approach to develop controllers for quadrotor UAVs.- A UAF-Driven point of view to implement UAV controllers.- Design and manufacturing a virtual reality parachute training simulation system.- Radar design techniques deployed in anti-drone and counter UAV.- An automatic control system for the takeoff and landing of a quadrotor.- Aerodynamic effect of different drone blade tip shapes.- Modal analysis of a body-spring system modeling an insect flapping-wing structure.- Research and design the wing structure separation for HALE UAV.- Research of kinematics and solutions to overcome the delay caused by the steering control unit in the automatic system of controlling the angle stability of the aircraft.- Study on rotor interactional effects on aerodynamic noise characteristics of quadrotor unmanned aerial vehicle.- PID controller system for hexacopter using angular rate correction block.- Exploring the efficacy of VR/Haptic technologies in elevating aviation training and simulation.- Impact of AI on sustainable procurement: revolutionizing aviation maintenance operations.- Exploring the Sustainability Effects of High-Altitude UAV Components using Multicriteria Decision Analysis.- Numerical optimization of aerodynamic noise reduction in a micro turbojet engine using nozzle chevrons.- An experimental investigation of the effect of biodiesel on the emission characteristics of diesel engines.- Combustion Characteristics of Jet Fuel Surrogates.- Evaluation of the Heat-Resistant Properties of an EPDM-based Insulator in Solid Rocket Motors.- Study to determine the blast wave pressure of simultaneous explosions in the aquatic environment.- Thermal conduction analysis of a common bulkhead propellant tank under eccentricity variations.- CFD simulation for thermal results on Honda Wave Alpha 110cc motorcycle exhaust wall.- A technique to speed up solving linear algebraic equations in the finite element method.- Energy attenuation in intelligent aircraft structures.- Stress investigation of FG-CNTRC cylinder shell in thermal environment.- Effects of loading rate and crack length on interlaminar fracture toughness for CYCOM 977-3/IM7.-Concurrent design of composite pressure vessels.- An analytical method for solving the problem of stationary motion of a shell segment under the influence of a harmonic cylindrical wave in an acoustic medium.- Composite materials for space radiation shielding: a review.- Aerodynamic performances of an axial transonic compressor using passive control systems.- Effect of geometric parameters of cross-flow wind turbine on the generator power for moving road vehicles.- CFD analysis of aircraft wheel washing machine.- Experimental data analysis: effects of the convective mach number on mixing layer turbulence.- Investigated the effect of grid patterns to the grid fins aerodynamic characteristics.- Development of Markov chains for random vertical wind profiles.- An optimization technique for horizontal axis wind turbines' airfoils using XFOIL and genetic algorithm.- Aerodynamic and aeroacoustic characteristics of toroidal propeller using CFD approach.- A Computational Investigation on Underexpanded Supersonic Free Jet with Imposed Pressure Perturbation.- The freezing process of water drops - a numerical investigation.- Computational model for the aerodynamic characteristics of sounding rockets.- Design the flight trajectory of a cruise missile to avoid threats.- Application of drones for road condition assessment.- Flight Simulation - Part 1-Algorithm and calculation module.- Flight Simulation - Part 2 - Kinematics of a flight simulator system.- Methods of trajectory correction employing the pulse steering array and global navigation satellite (GNSS).- Flight simulator to investigate the impact of different types of actuators on the piloting.