Designing, Processing and Properties of Advanced Engineering Materials

<ul><li>Asymmetric Rolling as Means of Texture and Ridging Control and Grain Refinement of Aluminum Alloy and Steel Sheets</li><li>High Performance Materials Development in the 21^st Century: Trends and Directions</li><li>Toughness Assessment of a Variety of Materials: Similarities and Discrepancies </li><li>Modeling Precipitate Microstructure Evolution in Alloys with First-Principles Energetic Information</li><li>Processing and Alloy Development to Optimise the Properties and Cost-Effectiveness of Components Manufactured from TiAl-Based Alloys</li><li>Orientation Dependence of Dynamic Recrystallization Behavior of Al Single Crystals </li><li>Recent Progress in Molecular Orbital Approach to Alloy Design</li><li>Aerosol Deposition Method for Fabrication of Nano Crystal Ceramic Layer</li><li>Quantitative Analysis of Precipitation Behavior in Ferrite of V Added Microalloyed Steel</li><li>Characterization of Friction Welding for IN713LC and AISI 4140 Steel</li><li>High Temperature Deformation Mechanism Maps of NiAl</li><li>Metastable Two-Phase Field(A2+B2) in Co-Al-Fe and Co-Al Alloy Systems</li><li>Fabrication of Magnesium Alloy (AZ31) Sheet by Extrusion</li><li>Development of Modified Embedded Atom Method for Alkali Metals</li><li>Design and Fabrication of Bi-Convex Variable Focusing Lens Arrays Using Liquid Crystal for Integral Photography</li><li>Characteristics of Electron Density Distributions in Metal Oxides</li><li>High Temperature Wear Properties of Multiphase Composite: The Role of Transfer Film</li><li>Properties Evaluation of Composites Including Cracked Ellipsoidal Inhomogeneity</li><li>Molecular Dynamics Simulation of Stress Induced Grain Boundary Migration during Nanoindentation Experiments</li><li>Influence of Biaxial Surface Stress on Mechanical Indenting Deformations</li><li>Molecular Dynamics Analysis of Structure and Intrinsic Stress in Amorphous Silicon Carbide Film with Deposition Process Parameters</li><li>Numerical Analysis on the Dissimilar Channel Angular Pressing by Multi-Pass Rolling</li><li>A Study on the Process Design of Cold-Forged Automobile Parts</li><li>Finite Element Method in Powdered Metal Compaction Processes</li><li>Modification of the Recrystallization Texture by Means of Cross Rolling in Ferritic Stainless Steel Sheets</li><li>Creep Analysis of Cr-Mo Steels Using a Dislocation Based Constitutive Modelling</li><li>Effects of Processing Variables on the Development of the Cube Texture in Ni Tapes Fabricated by the Cold Working of Ni Powder Compact Rods</li><li>A New Control Algorithm for Impressed Current Cathodic Protection on the Underwater Hull</li><li>Study of Magnetic Annealing on Magnetostriction in Grain-Oriented 3.2 % Si Steels</li><li>Effect of Heating Rate on Transient Liquid Phase Diffusion Bonding of Ni-Based Superalloy GTD-111 </li><li>Notch Effects on Impact Tensile Properties in A6061-T6 Aluminum Alloy</li><li>Ultrafine Grained Bulk 5083 Al Alloy Produced by Cryogenic Rolling Process</li><li>Aluminum Alloy Strips Casting Using an Unequal Diameter Twin Roll Caster</li><li>Development of Light-Weight Al Scroll Compressor for Car Air Conditioner</li><li>Effect of Bubbling on the Primary Silicon in Hypereutectic Al-Si Alloy</li><li>Effect of Electromagnetic Force on the Silicon Size in Hypoeutectic Al-Si Alloy</li><li>Effect of Stacking Layer Number on Mechanical Properties of Accumulative Roll Bonding Processed Aluminum</li><li>Enhanced Modification Process of B.390 Casting Alloy by the Ca Content Control</li><li>Microstructure Characterizations of Hypereutectic Al-Si Alloys with Different Undercooling Levels</li><li>Effect of Distribution Coefficient on Copper Purification by Zone Refining Process</li><li>Grain Refinement of Copper Alloys by Equal Channel Angular Pressing</li><li>Formability of Magnesium Alloy Sheets Manufactured by Semi-Solid Roll Strip Casting</li><li>Transformation Behavior of a Ti-Ni-Cu-Fe Alloy</li><li>Prediction of Microstructure During High Temperature Forming of Ti-6Al-4V Alloy</li><li>Dissimilar Joining of Nickel Aluminide Intermetallic Compound with Spheroidal Graphite Cast Iron by Using Combustion Synthesis</li><li>Surface Amorphization in Intermetallic Compounds by Shot Peening</li><li>Combustion Synthesis Process of Ag Added Al₃Ti Intermetallic Compound</li><li>Morphology of Carbon Micro-Coils</li><li>Synthesis of Porous Mullite by Vapor Phase Reaction</li><li>Self-Propagating High-Temperature Synthesis of Aluminum Nitride and its Characterization</li><li>Fabrication of Activated Carbon Fibers from Stabilized PAN-Based Fibers by KOH</li><li>Role of Unstable Chemical Species (Non-Graphitic Carbon and Flowing NH₃ Gas) on the Equilibrium Point of the Reaction Product (Carbide, Carbo-Nitride or Nitride)</li><li>Sinter-Bonding of Polycrystalline Silicon-Nitride Using Source Powder of Superplastic Ceramics as Insert Material</li><li>Processing Technique for Wear Resistance Parts Using Ultra Fine Particles Reinforced Si₃N₄</li><li>Preparation and Characterization of Porous Si-Coated SiC Fiber Media</li><li>Abnormal Crystal Growth in the Sintered (Bi_0.2Sb_0.8)₂Te₃ Alloys Induced by Silver Addition</li><li>Efflorescence and Leaching Behavior of Metal Ions for EAF Dust-Clay Based Bricks</li><li>Production Mechanism of Superfine Powders by Jet Mill</li><li>Synthesis and Evaluations of Microstructure Properties on Al-(50, 60, 70 mass%)Si Systems by Mechanical Alloying</li><li>Nanocomposite Formation in the Fe₂O₃-M (M=Al, Ti, Zn, Cu) Systems by Mechanical Alloying</li><li>Mechanical Alloying Effect of Hematite and Graphite</li><li>Sintering Distortion of Barrier Ribs Formed via Capillary Molding</li><li>Effect of CoO Doping on the Sintering Ability and Mechanical Properties of Y-TZP</li><li>Serration Phenomenon in High Purity Chromium</li><li>Synthesis of CuInSe₂ and CuInGaSe₂ Nanoparticles by Solvothermal Route</li><li>Recovery of Lithium from Seawater Using Nano-Manganese Oxide Adsorbents Prepared by Gel Process</li><li>Resistance Sintering of Copper-Graphite Powder Mixture under Pressure</li><li>Fabrication of Thin Film Using Nanosized Indium Tin Oxide (ITO) Powder and Its Degradation Characteristics</li><li>Photocatalysis for Oxidation of Phenol and Reduction of Inorganic Pollutants by Nanocrystalline TiO₂-ZrO₂ Powders</li><li>Fabrication of Al₂O₃-ZrO₂ (3Y-TZP) Composites with Graded Structures by Centrifugal Slip Casting Method</li><li>Fabrication and Properties of TiB₂ Reinforced Cu Composites by Electromagnetic Stirring</li><li>Fabrication of BN/Al(-Mg) Metal Matrix Composite (MMC) by Pressureless Infiltration Technique</li><li>Tensile Properties and Fracture Behavior of SiCp/AC4CH Composite at Loading Velocities of up to 10m/s</li><li>Preparation of W-C-B Composites by Reactive Resistance-Heated Hot Pressing</li><li>Measurement and Analysis of Plasma Arc Cutting Acoustic Signal</li><li>Fabrication of Copper Clad Aluminum Wire (CCAW) by Indirect Extrusion and Drawing</li><li>Microstructural Effects of Electromagnetic Stirring Strength and Casting Speed in Continuous Casting of Al Alloy</li><li>Barrier Ribs of PDP by Injection Molding</li><li>Analysis of Waste Heat Recovery to Steel Scrap Preheating in an Enclosure Vessel</li><li>Up-Grade Recycle by Consolidating Aluminum Cutting Chip under Severe Plastic Deformation</li><li>Low-Cycle Fatigue Fracture Behavior of Superalloy GH4586 at Elevated Temperature</li><li>Effects of Deformation on Surface Modification by Nitrogen Ion-Implantation</li><li>Improvement of Inner Surface for Machine Parts by Shot Peening</li><li>Oxidation Behaviour of Nickel-Based Alloys Containing High Re Contents Comparable to the Third Generation Nickel-Based Superalloys</li><li>Plasma Etching for Fabricating the Concave-Type DRAM Capacitors</li><li>Vertical Etching of Ru Electrodes Using the O₂/Cl₂ System</li><li>Dry Oxidation Behavior of Epitaxial Si_0.7Ge_0.3 Films</li><li>Crystal Growth of Aluminum Magnesium Borides from Al-Mg-B Ternary System Solutions and Properties of the Crystals</li><li>Corrosion Characteristics of Surface-Modified DET Magnesium Powders</li><li>Plasma Characteristics of Supersonic Nitrogen/Hydrogen-Mixture and Ammonia Plasma Jets and Nitrided Material Properties</li><li>Electrodeposition of Bi₂Te₃ for Nanowire Application</li><li>Fabrication of Si Nitride Coating onto Metal Substrate by Reactive RF Plasma Spraying</li><li>Characteristics of the Compound Layer on the SCM 435 Steel Produced by Plasma Nitrocarburizing</li><li>Material Spraying Using Electromagnetically Accelerated Plasma Jet</li><li>Electrochemical Kinetics Study of Electroless Copper Plating for Electronics Application</li><li>Property of Laser Welded Bake-Hardening Steel in Tailored Blanks for Automobile</li><li>Reaction between Sn-In Solder and Under Bump Metallurgy</li><li>A Study on Interfacial Reaction between Electroless Plated Ni-P/Au UBM and Sn-Bi Eutectic Solder Using AEM</li><li>Characteristics of CO₂ Laser Welded 800MPa Grade TRIP Steel</li><li>Explosive Welding of Thin Plates Using Underwater Shock Wave for Surface Modification</li><li>Welding of AZ31B Magnesium Alloy by YAG Laser/ TIG Arc Hybrid Welding Process</li><li>Observation of Metal Flow Phenomenon of Lap Joints during Friction Stir Welding </li><li>Topics on Recent Friction Stir Welding Developments in Japan</li><li>Spectroscopic Analysis of Plasma Induced in Laser Welding of Aluminum Alloys</li><li>Welding of Aluminum and Steel by Friction Stir Diffusion Process</li><li>Friction Welding of A 6061 Aluminum Alloy and S45C Carbon Steel</li><li>Cu-Based Metallic Glass Matrix Composites with High Ductility</li><li>Scanning Electron Microscopy Observations of Fractal Pattern Formation in Al/Ge Bilayer Films</li><li>Fabrication of CdS Thin Film Pattern by CBD Method Using the Self-Assembled Monolayer</li><li>Dependence of Titanium Deposition upon Its Ionic State in Molten Salt</li><li>Deposition of Copper Thin Films on Titanium Nitride Layer Prepared by Flow Modulation CVD Technology</li><li>Development of Ultra Fine Crystalline Diamond Film and Some Applications</li><li>Microstructure and Chemical Properties of c-BN Films Prepared by ME-ARE</li><li>Preparation and Characterization of IZO Transparent Conducting Films by the Sol-Gel Method</li><li>Effect of UV Illumination on Deposition of Low-k Si-O-C(-H) Films by PECVD</li><li>Ferroelectric Characteristics of Sr_xBi_2.4Ta₂O₉ Thin Films and Electrical Properties of the Pt/Sr_xBi_2.4Ta₂O₉/TiO₂/Si Structure</li><li>Observation of Crystallization Behavior in ITO Thin Films Prepared by RF-Magnetron Sputtering with and without External Heating</li><li>Hydrogen-Induced Degradation and Passivation of Ferroelectric SrBi₂Ta₂O₉ Thin Films by Au Top Electrode</li><li>Oriented Growth of ZnO Thin Films on SiC Buffered Si(001) Substrates by Pulsed Laser Deposition</li><li>Epitaxial Growth of Mn-Doped ZnO Thin Films on Al₂O₃ (0001)</li><li>Characteristics of ZrO₂/Al₂O₃ Bilayer Film for Gate Dielectric Applications Deposited by Atomic Layer Deposition Method</li><li>Effect of Binders on the Magnetic Behavior of P/M Processed FeSiBCuNb Alloy</li><li>Axial Pressing Method Using Pulse Magnetizing Field for the Preparation of Nd-Fe-B Sintered Magnets</li><li>Effect of Growth Condition on the Electrical and Magnetic Properties of Sputtered ZnCo₂O₄ Films</li><li>Alternating Magnetic Field Crystallization of Amorphous Si Films</li><li>Effects of Pre-Strain and Aging Treatment on the Mechanical Properties of 1.0wt.%Cu Containing Hot Rolled Steel Sheet </li><li>Coarsening Kinetics of B2 Precipitate Particles in an Elastically Constrained Fe-Al-Co Alloy</li><li>Microstructural Change of Cementite in Carbon Steels by Deformation</li><li>TEM Observations of the Precipitation of A2 Particles in D0₃ Precipitates in Fe-Si-V Alloy System</li><li>Effects of Heat Treatment and Alloying of Spheroidal Graphite Cast Iron on Corrosion Resistance in Aqueous Environment</li><li>Characteristics of Material Degradation for Thermal Aged X20CrMoV12 1 Steel </li><li>Mechanical Behavior of As-Cast and High Temperature Exposed Ni-Base Superalloy B1900</li><li>Investigation on ?-Channel Widening during Uniaxial Creep Test of a Ni-Base Single Crystal Superalloy</li><li>Tensile Deformation Behavior of M963 Cast Nickel-Base Superalloy</li><li>Effect of Melt Treatment on the Microstructure and Creep-Rupture Behavior of M963 Cast Nickel-Base Superalloy</li><li>Tensile Deformation Behavior of M963 Cast Nickel-Base Superalloy</li><li>Low Cycle Fatigue and Fracture Behavior of Nickel-Base Superalloy CM247LC at 760 degreesC</li><li>Texture of Electrodeposited Ni Films</li><li>Ultrasonic Nondestructive Evaluation of the Creep Damaged IN738LC Superalloy </li><li>Mechanical Property of Single Phase Co-Ni-Cr-Mo Based Superalloy Produced by Cold Working and Recrystallization Heat Treatment</li><li>Critical Strain for the Initiation of Dynamic Recrystallization in a Ni-Fe Base Alloy</li><li>Thermomechanical Behavior of Al-Mg-Si Alloys at the Elevated Temperature</li><li>Effects of Silicon and Chromium on the SCC Properties of Al-Zn-Mg-Cu Cast Alloy</li><li>Tensile Deformation and Fracture Behavior of a Commercial Al Alloy with Nano-Sized Grains</li><li>In-Situ Orientation Rotation Behavior Study during Tensile Deformation of Aluminum Single Crystal and Polycrystal</li><li>Dry Sliding Wear Characteristics of Severely Deformed 6061 Aluminum and AZ61 Magnesium Alloys</li><li>Effect of PWHT on Behaviors of Precipitates and Hardness Distribution of 6061 Al Alloy Joints by Friction Stir Welding Method</li><li>Rapid Grain Growth of Hot Extruded Al-Zn-Mg-Cu-(Sc) Alloy during Heat Treatment</li><li>Spray Casting of Al-25Si Alloy and Hot Deformation Behavior</li><li>Ultra Grain Refinement and High Strengthening of Al Based MMC by Accumulative Roll Bonding Process</li><li>Effects of Silicon and Chromium on the Fatigue Properties of Al-Zn-Mg-Cu Cast Alloy</li><li>Thermal Properties and Fracture Behavior of Compositionally Graded Al-SiC_p Composites</li><li>Microstructural Evolution and Mechanical Properties of Ultrafine Grained Commercially Pure 1100 Aluminum Alloy Processed by Accumulative Roll-Bonding (ARB)</li><li>Wear Behavior of Graphite-Dispersed Al-Sn-Si Alloys</li><li>A Study on Tactile Friction and Wear - Frictional Wears Characteristics of Human Fingers on Various Soft Materials</li><li>Model for the Protective Oxidation of Mg-Ca Alloys Containing Be at Elevated Temperature</li><li>Effect of Sb Addition on the Creep Property of AZ31 Alloy</li><li>Tensile Deformation Characteristics of Commercial Mg Alloys Processed by Equal Channel Angular Pressing </li><li>Precipitation Behavior of Mg-Y-Nd-Zr Alloy</li><li>Mechanical and Fracture Behaviors of (Al₂O₃+SiC_p)/AZ91 Hybrid Mg Matrix Composite</li><li>Damping and Mechanical Properties of (Graphite + 9Al₂O₃?2B₂O₃)/Mg Metal Matrix Composites</li><li>Measurement and Analysis of Sound Absorption of Porous Magnesium</li><li>Dislocation Plasticity and Complementary Deformation Mechanisms in Polycrystalline Mg Alloys </li><li>Grain Refinement on AZ31 Magnesium Alloy by Highly Strained and Annealed Method</li><li>Anelastic Properties of Polycrystalline Copper</li><li>Microstructure and Mechanical Properties of DBC on Sputter Deposited Copper on Alumina Substrate</li><li>Characteristics of the Electroless-Deposited Cu Film as Interconnect on a TaN Diffusion Barrier</li><li>Microstructures and Electrical Conductivity of Cu-Ca Alloys for High Efficiency Induction Motors</li><li>Tensile Properties of Cast and Hot Isostatic Pressurized Ti-6Al-4Fe-xSi Alloys</li><li>Fatigue and Contact Damage of Layered Machinable Ti₃SiC₂ Ceramics</li><li>Effect of Annealing on the Microstructures and Mechanical Properties of Mo₃Si-Mo₅Si₃ Eutectic</li><li>Direct Growth of SiC Nanorods on Si Using APCVD and Single Precursors</li><li>In-Situ Fabrication and Microstructure of Alumina-Zirconia Layered Rolling Bearing in Aqueous System</li><li>Strength and Toughness of Graphite Materials for Solid Rocket Motor</li><li>Energetics of Native Defects in Al₂O₃ and SiO₂</li><li>Dynamic Damage Behavior during Cooling Process of Ceramic Coatings</li><li>Characteristics of Fine WO₃ Prepared by Emulsion Evaporation Methods </li><li>Synthetic Processes via Complex Precursors of Rare Earth Manganites with the Perovskite and its Related Structures </li><li>Application of La₂O₃-B₂O₃-TiO₂ Glass-Ceramic for Low Temperature Co-Fired Ceramic (LTCC) Materials </li><li>Determination of Diffusion Kinetic Parameters and Potential Barrier Height at the Grain Boundary of the Semiconducting SrTiO₃ Ceramics</li><li>Structure and Dissolution Properties of Phosphate Glasses for Glass Fertilizer</li><li>Phase Behavior of La_1-xMnO_3-1.5x with Trivalent Manganese Ion</li><li>Photoluminescence Properties of Ba-Substituted SrAl₂O₄:Eu Phosphor</li><li>On Impact Characteristic Evaluation in CF/Epoxy Composites under Falling-Weight Impact Loadings</li><li>Effect of Mo Addition on Microstructure and Properties of Nb/Nb₅Si₃ In-Situ Composite</li><li>On Ultrasonic Characteristics in Carbon/Phenolic Matrix Composite Materials </li><li>Residual Stress Distribution in Graded PSZ/Inconel Composite Deposited by Particle Collision</li><li>Thermal Expansion Behavior of the Multiphase Composite System</li><li>Microwave Behavior of ?-Fe/Fe₃B/Y₂O₃ and ?-Fe₃N/Y₂O₃ Resin Composites in GHz Range</li><li>Effect of Electric Current and Sliding Speed on Wear Rate of Metallized Carbon Strip Sliding against Copper Trolley</li><li>Evaluation of Solid Lubricant Coatings for Low Friction and Wear Resistance Using the Atmospheric Plasma Spray</li><li>Relationships between Textures and Surface Roughness, Frictional Behavior, Erosion and Corrosion Properties of TiN Films</li><li>An Investigation on the Strength-Porosity Relation in Sintered 17-4 PH STS Produced by Powder Injection Molding</li><li>Rapid Tooling for Injection Moulding Process</li><li>Gas Analysis in Spark Plasma Sintering of Hydroxyapatite</li><li>Synthesis of CNTs/Metal/Al₂O₃ Nanocomposite Powders by Chemical Vapor Deposition</li><li>Breakage Mechanism of Al₂O₃ Layer on Nano Al Powder by Magnetic Pulsed Dynamic Compaction</li><li>Phase Relation and Room Temperature Mechanical Property of Cr₂Zr Based Laves Phase</li><li>Thermal Stability and Mechanical Properties of Nanocrystalline L1₂ Al₃Hf and (Al+12.5 at.%Zn)₃Hf Prepared by MA and SPS</li><li>High Temperature Oxidation of Ti39.4Al10V Alloy</li><li>High Temperature Oxidation Mechanism of TiAl-W-Si Alloys</li><li>Oxidation of (Al+12.5%Cu)₃Zr Intermetallics Synthesized by Mechanical Alloying</li><li>Oxidation of (Al+8%Mn)₃Ti Intermetallics Synthesized by Mechanical Alloying</li><li>High Temperature Deformation Behavior of a Ti-45.5Al-2Cr-4Nb-0.4B Intermetallic Compound</li><li>Work Hardening and Flow Softening of ?-TiAl Containing Ni</li><li>Deformation Behaviors of Nb Doped Gamma Titanium Aluminides</li><li>Yield Stress Anomalous Behavior in ?-CuZn Alloy</li><li>Tensile Properties of MoSi₂ at Elevated Temperatures</li><li>Fatigue and Contact Damage of Layered Machinable Ti₃SiC₂ Ceramics</li><li>Effects of Material Properties on Elastic Characteristics of Cold Forged Part</li><li>Elastoplastic Line Contact in Cylindrical Indentation</li><li>Ductile-Brittle Transition Behaviors with Two Striker Geometries in the Instrumented Charpy Impact Test</li><li>Effect of ?-Stabilizing Transition Elements on Elastic Modulus of Ti-M Systems</li><li>Thermal Fatigue Behavior of the Surface Treated Hot Die Steel Depending on Test Temperature</li><li>Formation of Shear Texture and Ultra-Fine Grains during Equal Angular Channel Rolling and Subsequent Annealing in AA 3003 Sheet</li><li>Correlation between Microstructure and J-R Fracture Resistance of AISI Type 347 Weld </li><li>Effect of Temperature on Strength and Residual Stress Distribution in Silicon Nitride to 304 Stainless Steel Brazed Joints</li><li>High Temperature Background Characterization of Internal Friction for Fine-Grained Nickel/Zirconia Composite</li><li>Interfacial Morphology of Duplex Stainless Steel Joints Brazed with Ni-Cr-Si-B Filler Metal</li><li>Growth Kinetics of IMC Formed between Sn-3.5Ag-0.75Cu BGA Solder and Electroless Ni-P/Cu Substrate by Solid-State Isothermal Aging</li><li>Influence of Shear Speed on the Shear Force of Eutectic Sn-Pb and Pb-Free BGA Solder Joints </li><li>Effect of Argon Ion Bombardment on Diffusion Bonded Joint of Various Metals</li><li>Effect of Oxygen Content on Thermoelectric Properties of Sintered Bi-Te Based Compounds </li><li>Thermoelectric Properties of the Pseudogap Fe₂VAl System</li><li>Electrical Properties of G4-48azo Dendrimer Containing Azobenzene Functional Groups</li><li>Thermoelectric Properties of Undoped CoSb₃</li><li>Comparison of Pd/Ge/Ti/Pt and Pd/Si/Ti/Pt Ohmic Contacts to N-Type InGaAs for AlGaAs/GaAs HBTs</li><li>Relationship between Splat Morphology and Property of Plasma Sprayed Alumina Coatings</li><li>Characteristics of Ni-Ti-Zr-Si-Sn Bulk Amorphous HVOF Coating</li><li>Isothermal Crystallization of Zr₅₅Al₁₀Ni₅Cu₃₀ Bulk Amorphous Alloy Near the Glass Transition Temperature</li><li>Deformation Behavior of Ni-Based Metallic Glass Matrix Composites Reinforced by Brass Short-Fibers Synthesized by Warm Extrusion of Powders</li><li>Crystallization Behaviors of the Bulk Amorphous Alloy Ni₆₀Zr₂₅Al₈Y₇</li><li>New Cu-Based Bulk Metallic Glasses with High Strength of 2000 MPa</li><li>Structural and Optical Features of Si-Rich SiO₂ Films Prepared by Magnetron Sputter Techniques</li><li>White Light Emitting Diodes of GaN-Based Sr₂SiO₄:Eu and the Luminescent Properties </li><li>Annealing Temperature Effect of PbZr_0.4Ti_0.6O₃ Film on La_1/2Sr_1/2CoO₃ Bottom Electrode </li><li>Optical and Microstructural Properties of TiO₂, Al₂O₃ and SiO₂ Single Layers Deposited by Plasma Assisted E-Beam Evaporation</li><li>Heat Capacities of Ln₂MnNiO₆ (Ln = Rare Earth)</li><li>Structural Analysis of a Complex Oxide Eu₂Mn_2/3Nb_4/3O₇ with a Pyrochlore-Related Structure</li><li>Effects of External Electrode and Heat Treatment on Stress Anisotropy and Residual Stress in BaTiO₃-Based Ni-MLCCs</li><li>Characteristics of ZnO Thin Film by Atomic Layer Deposition for Film Bulk Acoustic Resonator</li><li>Holographic Recording in Congruent LiNbO₃ Co-Doped with Tb and Fe</li><li>Characteristic Investigations of Stoichiometric LiNbO₃ Single Crystal Fiber Co-Doped with Tb and Mn</li><li>Electrical/Optical Properties of Thin Transparent Oxide Films Deposited Using DC Magnetron Sputtering</li><li>Characteristics of SnO₂ Thin Films Deposited by RF Magnetron Sputtering</li><li>Properties of Tin Oxide Films Prepared by MOCVD</li><li>Electrical and Optical Characterization of Indium Tin Oxide (ITO) Films for Low Resistance Transparent Electrode</li><li>Characteristics of HfO₂ Dielectric Layer Grown by MOMBE</li><li>Structural, Optical and Electrical Properties of ZnO Films by Sol-Gel Method</li><li>Antireflection Layer Coatings on the Si Solar Cell Using SiO₂ and Si₃N₄</li><li>Nanostructural and PL Features of nc-Si:H Thin Films Prepared by PECVD Techniques</li><li>Preparation and Characterization of Organic Light Emitting Devices Using QD Dopant </li><li>XPS Analysis and Atomic Force Microscopy Observation of Micro-Liquids Adsorbed on Pure Iron and Copper Surfaces</li><li>Microstructures and Magnetic Property of Bulk and Thin Film Co2MnGe Heusler Compound</li><li>Fabrication of SiO₂-Coated Magnetic Nanoparticles for Applications to Protein Separation and Purification</li><li>Shock Consolidation of Sm-Fe-N Magnetic Powders and Magnetic Properties </li><li>Magnetotransport in Ferromagnetic (Ga,Mn)N Epitaxial Films </li><li>Synthesis and Crystal Structure of Hexagonal DyMnO₃</li><li>Influence of Annealing Temperature on Magnetic Properties in Co-Based Amorphous Ribbons</li><li>Structure Dependent Oxidation of Al Thin Films for MTJ Tunnel Barrier</li><li>Properties of Nd-Fe-B Magnetic Powder Prepared by Reduction-Diffusion Process Using a Spray-Dried Precursor</li><li>Magnetotransport Properties in Semimetallic Bismuth Thin Films</li><li>Origin of Thermal Stability of IrMn Based Specular Spin Valve Type GMR Multilayer</li><li>Planar Hall Effect of GaMnAs</li><li>Measurements of Magnetic Compton Profiles of Amorphous Fe-Tb Thin Films Using Circularly Polarized X-Rays</li><li>Effect of Zr-Substitution on the Magnetic Property of a YIG Ferrite</li><li>Magnetotransport Properties in a Lateral Spin-Injection Device with a Ferromagnetic/Si/ Ferromagnetic Junction</li><li>New Manufacturing Process of Nickel-Free Austenitic Stainless Steel with Nitrogen Absorption Treatment</li><li>Mechanical Properties of Binary Ti-Ta Alloys for Biomedical Applications</li><li>Transformation Behavior and Shape Memory Characteristics of Ti-45Ni-5Cu(at%) Alloy Ribbons Fabricated by Melt Spinning</li><li>Porous TiNi Biomaterial Produced by Self-Propagating High-Temperature Synthesis: Pore Structure, Mechanical Property and Application</li><li>Densification and Mechanical Property of Nanostructured NiAl Produced by Mechanical-Alloying and Spark-Plasma Sintering</li><li>Mechanochemical Synthesis of Nano-Sized CeO₂ and its Application for CMP Slurry</li><li>Manufacturing of Cu-15.0Zn-8.1Al Shape Memory Alloy Using Spark Plasma Sintering</li><li>Microstructure of Cu-TiB₂ Nanocomposite during Spark Plasma Sintering</li><li>Photocatalytic Activity of SiO₂-TiO₂ Nanoparticles Prepared by Sol-Hydrothermal Process</li><li>Apatite Formation on PDMS-Modified SiO₂-CaO-P₂O₅ Hybrids Prepared with Different P₂O₅ Content by Sol-Gel Method </li><li>Effect of Heating Rate on Sintered Microstructure of W-Cu Nanocomposite Powder Produced Using W-CuO Mixture</li><li>Study of Phase Transformation of Nano Al₂O₃ Compacts Derived by Hydrolysis and Subsequent Thermal Sintering of Al Powders</li><li>Quenching of Growth of Zinc Oxide Nanoparticles by Adsorption of Organic Stabilizers</li><li>Synthesis of Nano Metal Powder by Electrochemical Reduction of Metal Oxides </li><li>Sintering Behavior of the Powder Injection Molded Nanocrystalline Fe-50wt%Ni</li><li>Synthesis of ZnO Nanoparticles Embedded in a Polymeric Matrix; Effect of Curing Temperature</li><li>Formation of Nanocrystalline Structure in Steels by Air Blast Shot Peening and Particle Impact Processing</li><li>Threshold-Varying Method of Stationary Wavelet Denoising for Ultrasonic Speckle Reduction</li><li>Synthesis and Properties of Silica-Modified Polybenzoxazine </li><li>Preparation of Monodispersed and Nano-Sized Spherical SiO₂ Particles by Emulsion Method</li><li>Fabrication of Oxide/Semiconducting Coaxial Nanotubular Materials Using Atomic Layer Deposition </li><li>Synthesis of Ultra-Fine Iron-Oxide Nano-Particles in a Diffusion Flame with Electro-Spraying Assistance</li><li>Characteristics of Fe₂O₃/SiO₂ Nano-Composites Particles Prepared by a Diffusion Flame with Premixed Precursor</li><li>Microstructural Evolution on Dissolution of Commercial Calcium Phosphate Ceramics</li><li>Properties of Catalytic Filter for the Hot Gas Cleaning</li><li>Comparison of III- Nitride Nanotubes: Atomistic Simulations</li><li>Application of Water-Based Alumina Tapes Prepared Using PVP Binder for All-Ceramic Dental Crowns</li><li>Correlation between Thermal Expansion Coefficients of La₂O₃-Al₂O₃-SiO₂ Glasses and Strength of the Glass Infiltrated Alumina for all Ceramic Crown </li><li>Characterization of High Temperature Oxidation Properties of Silicon Carbide Nanofibers </li><li>Magnetorheological Characterization of Polymer-Iron Composite Suspensions</li><li>Effects of Layered Silicate on Nanoscopic Internal Structure and Morphology in Polymer Blend</li><li>Ultrasonic Characterization of Degradation of Aging Epoxy Coating</li><li>Fabrication of Al₂O₃/5 vol% Cu Nanocomposites Using Various Powder Mixtures and Its Properties </li><li>Effect of Sintering Atmosphere on the Microstructure of Hot-Pressed Al₂O₃/Cu Nanocomposites</li><li>Effect of Bioactive Grade Surface on In Vivo Behavior and Mechanical Stability in Titanium Based Implant Surface-Modified by Plasma Spray Coating and Chemical Treatments</li><li>Anisotropic Deformation Behavior of the Oriented Nanostructure of a Semicrystalline Terblock Copolymer with Multi-Scale Orderings </li><li>Cu Nanowire Structures Inside Carbon Nanotubes</li><li>Durability in Antimicrobial Effects of Silver Doped Hydroxyapatite Depending on the Synthesis Route</li><li>Comparison of Metal-Oxide Nanoparticle Formation in the Cu and Sn Thin Films by the Reaction with Polyimide</li><li>Fabrication of Micro PCR Chip and DNA Amplification</li><li>Prediction of the Structural Performances of ZnO Nanowires Grown on GaAs (001) Substrates by Metalorganic Chemical Vapour Deposition (MOCVD)</li><li>A Study on Anodic TiO₂ Photocatalyst for Water Purification </li><li>Fabrication Parameters for Highly Ordered Nano-Pore Arrays in Alumina Template</li><li>Photocatalytic Ecomaterials</li><li>Hydrophilicity and Bactericidal Effects of TiO₂ Thin Films Prepared by RF Sputtering</li><li>Fatigue Performance of Low Rigidity Titanium Alloy for Biomedical Applications</li><li>Effects of Alloying Elements on Elastic Modulus of Ti-Nb-Ta-Zr System Alloy for Biomedical Applications</li><li>Effect of Tin Addition on Phase Constitution and Heat Treatment Behavior in Ti-40Ta-Sn Alloys</li><li>Wear and Bioconductivity Characteristics of Oxidized Ti-29Nb-13Ta-4.6Zr </li><li>Microstructure at/around Interface between Plasma-Sprayed Hydroxyapatite and Ti Alloy</li><li>Reciprocal Tribocontact of Biomedical Alloys</li><li>Synthesis of Apatite Ceramics with Preferential Crystal Orientation</li><li>Nanostructured WC-Co Coatings from Different Feedstock Powders</li><li>Surface Modification and Characterization of Perovskite-Type Mixed Ionic-Electronic Conductors</li><li>Oxidation of Thermal Sprayed Metallic Materials during Flying in Air and the Coating Structures</li><li>Cold Spray Process ~ Overview and Application Trends ~</li><li>Flattening Problem of Thermal Sprayed Particles</li><li>Composition Design and Ageing of Ni-Mn-Ga Alloys </li><li>Clinical Application of TiNi Shape Memory Alloy Bone Fastener </li><li>Property of TiNi Shape Memory Foils Produced by Ultrafine Laminates Method</li><li>Thermodynamic Analysis of Thermoelastic Martensitic Transformations </li></ul>