Progress on Advanced Manufacture for Micro/Nano Technology 2005

Developing a Nanowriter System: Simulation and Experimental Set-Up of a Plasmonic-Based Lens Design
Nanometrology - Nanopositioning- and Nanomeasuring Machine with Integrated Nanopobes
Study of a Miniature Air Bearing Linear Stage System
Development of Micro Metal Forming Manufacturing System
Development of a Drop-On-Demand Micro Dispensing System
Mechanisms of Heat Transfer in Rotary Shaft of Rotating Machine with Nano-Sized Particles Lubricant
Fabrication and Mechanical Properties of Glass Fiber/Epoxy Nanocomposites
Determination of Residual Resist Layer Thickness in E-Beam Lithography Based on Energy Dispersive X-Ray Spectrometer
Development of Pressure Technique of Brake Nanofluids from an Arc Spray Nanoparticles Synthesis System
Applications of LIGA on Micro-Punching Process for Metallic Materials
Development of Finite Element Analysis Scheme for Micro Forming Using Grain Element and Grain Boundary Element
Fabrication and Characterization of 3D Aspheric Microlenses with Arbitrary Surface Profiles Based on a Novel Excimer Laser Contour Scanning Method
Highly Sensitive Infrared Temperature Sensor for CMOS Compatible Thermopiles
Diamond Tip Cantilever for Micro/Nano Machining Based on AFM
Finite Element Analysis of Room Temperature Nanoimprint Lithography Process with Rate Dependent Plasticity
Transducing Mechanical Forces Using a Polymer Optical Grating Sensor
Absorption of a Micro-Particle for Laser
Using the Hot Embossing Technology to Fabricate the Movable Component on Polymer Material
Effect of Sacrificial Layer Sizes and Fabrication Process on Deformation Caused by Residual Stress of Center-Anchored Circular Plate
Micro-Anode Guided Electroplating (MAGE) Control System
Fabrication and Mechanical Properties of MWNTs/Phenolic Nanocomposites
A Valveless Micro Impedance Pump Driven by PZT Actuation
Length Effect on Formation of Metallic Patterns by Nanoimprinting Process - Molecular Dynamics Simulation
Two-Dimension Three-Atom Removal Model for (110) Plane Nanocutting of Defectless Crystals of Copper, Nickel and Silver in [001] Direction
Mechanical Characterization of Thin Films by the Capacitance-Voltage Measurement of Microstructures
Thermo-Mechanical Effect on Nanostructure Formation Using Atomic Force Microscopy
Dynamic Characteristics in High Precision Non-Contact Machine Tool Spindles
Dynamic Model Based on Genetic Algorithms of Prediction for the Thermal Deformation of Machine Tools
Effects of Preload on the Thermal Behavior of an Oil/Air Lubricated Spindle
Injection Molding Measurement and Analysis of a Plastic Part with Changes in Thickness Dimensions and Material Types
Compensation Control of Cutting Tool Position in Machining Non-Axisymmetric Optic Mirror Surface
Measurement of Five DOF Motion Errors in the Ultra Precision Feed Tables
Investigation of Electron Beam Welding on AZ91D-F Extrusive Plates
Study on Shrinkage of Injection Molding Biodegradable Materials
Study on the Predictive Model for Shear Strength in Laser Welding Stainless Steel
Fabrication of Light Guiding Plate of Double-Side Hot-Embossing
Fabrication of Micro Components to Silicon Wafer Using EDM Process
A Study of Liquid Cooling Heat Sink Fabrication and Development in Notebook
Study on Optical Properties of Microstructure of Lightguiding Plate for Micro Injection Molding and Micro Injection-Compression Molding
Development of a Novel Micro Wire-EDM Mechanism for the Fabricating of Micro Parts
Predictive Modeling of Scuffing Performance of Gear Oil with MoDTC Using Response Surface Methodology
The Development of a Novel Optoelectronic Level
A Fundamental Modeling Approach for Nano-Grinding of Silicon Wafers
A Fast Auto-Focusing Method for Laser Diode Machine
Characterization of Polycrystalline Si Films Produced by ArF Excimer Laser Irradiation
Fabrication of Rolling Mold for a 200?m Microlens Array by 3D LIGA-Like Processes
Experimental Analysis for Low-Temperature Poly-Si Films Produced by Using the Excimer Laser Annealing Method
Modeling Analysis of Excimer Laser Crystallization of a-Si Films with Nanosecond Temperature Response
Reliability Prediction for 95.5Sn3.9Ag0.6Cu Solder Bump and Thermal Design for Lead Free System in Package with Polymer-Based Material
Study on Indentation-Sliding Contact Conditions between Semiconductor Terminal and Electrically Testing Probes
An Experimental Study on the Effects of Abrasive Particle Sizes on Polishing Phenomena
Parametric Investigation of Laser-Assisted Direct Imprint (LADI) Technique
Advanced Process Control Expert System of CVD Membrane Thickness Based on Neural Network
On the Wire Sweep Experiments and Predictions of Gold Wire for Semiconductor Wirebonding Technology
A Monte Carlo Model for Analyzing the Effects on Radiometric Temperature Measurement in Rapid Thermal Processor
Design and Analysis of SCARA Substrate Transfer Robot for Semiconductor and FPD Processing Cluster Tools
Nanosecond Time Resolution In Situ Optical Reflection and Transmission Measurements during XeF Excimer Laser Interaction with Amorphous Silicon Thin Films
Three-Dimensional Micro-Flow Measurement in a Capillary with a Diode Laser Micro-Particle Image Velocitometry
A New Concept of Optical Encoder Displacement Sensors: Gray Encoding Patterns and a Curve Fitting Method
An Investigation on the Application of Cryogenic Ball Milling to Ibuprofen Particle and Its Characteristics
Automatic Full-Field 3-D Profilometry Using White Light Confocal Microscopy with DMD-Based Fringe Projection
Development of a Non-Contact Tool Setting System for Precision Diamond Turning
A Genetic Approach on the PID Control of VCM for Auto-Focusing Laser Probe
Abbe Error-Free Test Equipment for Nanometer-Order Measurements
Temperature Effect on Tensile Behavior of Helical Multi-Shell Gold Nanowires
Experimental and Numerical Investigation into Mixing Efficiency of Micromixers with Different Geometric Barriers
Combined TiO2/SnO2 Material with Adding Pt by Sol-Gel Technology for Humidity Sensor
Modal and Stability Analysis of a Micro-Beam Structure Actuated by Electrostatic Force
Experimental Investigation of High-Resolution Injection Technique in Microfluidic Chips
Droplet Formation Studies for a Piezo-Actuated Micro-Injector
A Micropump for Droplet Ejection
Valveless Micropumps with One or Two Piezoelectric Buzzers
Computational Modeling of Micro-Fluid Flow in a Tubular Microchannel
A Silicon Oxide Hard Coating Deposited on Flexible Substrate by TMS - PECVD System
Three-Body Microcontact Model of Rough Surfaces and Its Application on Polishing of Wafer
An Improved Sensing-a-String-Hole Device with Learning Mode for the Frame of the Racket
Precise Riveting Systems Using Networked PLCs for Remote Monitoring and Control via the Internet
Research and Development on Control System of Multicoil Inside Solidification Combined Winding Machine
Stiffness of HSK Tooling System in High Speed Machining
Development of Real Time Monitoring System Using Controller Area Network
Development of an Open Architecture CNC System for a Wire-EDM Machine
Precision Positioning of Piezo-Actuated Stages Based on Feedback Control with GA Modeling
Electronic Circuit Simulation and Digital PC-Based Implementation of Dynamic MRR Optimization
A Time Optimized Process Planning System for Mold/Die Polishing
A Model for Acquisition of Implicit Design Knowledge Based on KDD
An Immune Algorithm for Least Cost Advanced Tolerance Design Problem
Optimization for the Maximum Rectangular Block from an Arbitrary Closed Region Using GA
The Predicted Model of Surface Roughness in Resharpening End-Mill for Tool Grinder
Auto-Tuning Digital Control Based on Parameters Identification and Disturbance Observer
A Web-Based Embedded Sequential Controller with USB 1-N Wireless I/O Modules
A Study on Fuzzy Logic Theory to Predict the Process Parameters in GMA Welding Process
Automatic Polishing of Super Accuracy Mirror Mold with Free-Form Surface by Curvature Analysis
Nonlinear Recursive Formulation for Kinematic and Dynamic Analysis of Robotic Manufacturing Systems
Thermal Contact Residual Stress Analysis of Elastic-Plastic Bilayer Micro-Cantilevers with Platinum Electrodes
Analysis for Repairing the Cracked PVC Pipe
Development of a 3D Cutter Compensation Postprocessor System for Multi-Axis Machining
A Relative Method for Finite Element Nonlinear Structural Analysis
Tool Path Planning for Edge Quality Enhancement in Planar Milling of Free Form Contours
Dynamic Analysis of Rigid-Body Mechanisms Mounted on Flexible Support Structures - Planar Case
Parametric Study of Spherical Micro-Lens Array
193 Excimer Laser Machined Electromagnetic Optical Scanning Mirror for a Laser Projection Display
Studies on CCD On-Line Detection in Curve Grinding
Skew Ray Tracing and Sensitivity Analysis of Paraboloidal Optical Boundary Surfaces
Process Reengineering of Collaborative Mold Design and Manufacturing - A System Engineering Evaluation Approach
Development of an Intelligent Virtual Reality System for High Speed Machining
Development of a Virtual Controller Integrating Virtual and Physical CNC
A Micromachine-Based Flow Cytometer Chip Integrated with Micro-Pumps/Valves for Multi-Wavelength Detection Applications
A Fully Integrated System for Cell/Particle Sorting in a Microfluidic Device Utilizing an Optical Tweezing and DIP Recognition Approach
Operation Principle and Simulation of Loop-Type Microfluidic Biochips
Synthesis of Au Nanoparticles@Mesoporous Silica Templated by Neutral Block Copolymers: Application in CO Oxidation
Using Magnetic Nanoparticles to Enhance Gene Transfection on Magneto-Electroporation Microchips
Quantum Dots CdSe/ZnS-Loaded Poly(D,L-Lactide-Co-Glycolide) Nanoparticles: Physicochemical Characterization and Application
Study on Thin Wall Injection Molding Formability and Property of Graphite-Polymer Composite Bipolar Plate for Proton Exchange Membrane Fuel Cell
Optimization of Parameters Affecting Tool Wear in Titanium Acetabulum Cup Forging
Application of FSQP to Inverse Estimation of the Constitutive Constants and Friction Coefficient in the Nosing Process
Influence of Die Material upon Formability and Galling of Hot-Dip Galvanized Steel Sheets
Application of Streamline Method and ANFIS for Determination of Anisotropic Optimal Blank in Cylindrical Cup Drawing
Computer Modeling of Extrusion by the Rigid-Plastic Hybrid Element Method
An Elasto-Plastic Finite Element Analysis of the Hat-Type Drawing Process of Sheet Metal
A Study on the Effects of Mass and Velocity Factor for the Dynamic-Explicit FEM in the Upsetting Process
Size Effects on Sheet-Metal Formability for Miniature Parts
A Study of Optimum Blank in the Deep Drawing Process of Square Cup with Flange by Using Adaptive Network Fuzzy Inference System
A Finite Element Analysis for the Forging Process of Hollow Spur Gear
The Hydroforming of Micro-Square Tubes With Non-Equal Section and Dendritic Shape
Constructing the Predictive Models of Friction Coefficient Using Cylindrical Compression Testing
Effect of Process Parameters on Forming Limits Based on Fracture Energy Diagram in Cold Forging
Identification of Plasticity Parameters of Metallic Coatings by Means of Depth-Sensing Micro-Indentation
Prevention of Seizure in Deep Drawing Using Plastic Die
Predictions of the Minimum Amounts of Preforming in the Radial Extrusion of Tubular Components
Fatigue Life Prolongation of Carburized Steel by Means of Shot-Peening
Springback Behavior of an Invar Sheet and Its Perforated Form
Experimental Research on Grind-Hardening of 65Mn Steel
Using Borer-Shape Electrode in Electrochemical Smoothing of Hole
Surface Finishing of Plastic Injection Mold Steel with Ball Burnishing and Spherical Polishing Processes on a Machining Center
The Characteristic of Abrasive Particle in Chemical - Mechanical Polishing
The Optimal Cutting-Parameter Design of Heavy Cutting in Side Milling for SUS304 Stainless Steel
Effect of Loading Rate on the Delamination Behavior of Carbon/Epoxy Laminated Composites
Autoresonant Tuning and Control in Ultrasonic Vibration Assisted Drilling Process
Joint Design and Fabrication for Mechanical Elastic Self-deformation Micro-Assembly Technology
The Use of the Taguchi-Grey Based to Optimize High Speed End Milling with Multiple Performance Characteristics
Ultrasonic Welding of Aluminum and Silicon Wafer
Laser Cutting Quality of the Ceramic Slabs
Ultrasonic Aided Electrical Discharge Grinding of Hard Materials Using a Metal Matrix Composite Electrode
The Effect of Spindle Speed Variation on Chatter Suppression in Rotating-Tool Machining
A Pulse DC Plasma Deposited Resistor Process
Finite Element Analysis of the Hydro-Mechanical Punching Process
Spiral-Layer Machining for Making Thin-Wall Structures
Development of Manufacturing Strategy - Influence of Technology Orientation and Customer Orientation: An Empirical Study Approach
A New Knowledge Discovery Model for Extracting Diagnosis Rules of Manufacturing Process
The Optimum Selection of a Parting Line for an Injection Mould Using FEM Database Management and Application Techniques
Effects of Human Factors on Performance of Advanced Manufacturing Technology: An Empirical Examination
Simulation and Analysis for Layout of Aerospace Sheet Metal Process with Lean Concept
Reliability Study of Cutting Tool Based on the Reliability-Dependent Hazard Rate Function
A Deterministic Model for a Manufacture System with an Advance Purchase Discount
Creative Design of Metal Can Crushers with Eight Links
Geometric Design of the Pinion with Two Circularly Arrayed Cylindrical Teeth for Roller Drives
Constraint-Based Multidisciplinary Collaborative Design Method of Gear Drive
A Simple Parameter Calibration Method for a Novel Controllable Mechanical Metal Forming Press
The Analysis and Modeling for Nutation Drives with Double Circular-Arc Helical Bevel Gears
Nondestructive Disassembly System for White Board Marker
The Influence of Serration on a Shaving Cutter with a Pre-Designed Relief Portion
3D Model Based Design for Control of a Mechatronic Machine Tools System
Automatic Inspection of Pipe Using Non-Contact Guided-Wave Technique with Enhanced Mode-Selectivity
A Theoretical and Experimental Study on Precision Controlling of Generated Path of an Elastic Linkage
Study on Eccentricity and Minimum Geometrical Center Distance of the Eccentric Involute Gears Transmission
Geometry Modeling for Indexing Cams Based on Screw Theory and Product of Exponential Formula
A Kalman Filter-Based Automatic Rotor Dynamic Balancing Scheme for Electric Motor Mass Production
An Algorithm for the Kinematic Design of Gear Transmissions with High Reduction Ratio
An Intelligent Tool Post in a Lathe
Kinematic and Dynamic Analysis for Closed-Loop Flexible Manufacturing Systems Using Nonlinear Recursive Method
A Novel Parallel Hybrid Motorcycle Transmission
Developing a Moving-Coil Actuator for Nano-Imprint Lithography System
Effect of Process Parameters on Coating Quality in Surface Coating Processes
Stability Analysis of the New Repetitive Learning Controller for Cutting Systems
An Investigation of Nanoscale Tribological Characteristics for Different Geometrical Sliding Systems
Deformation Characteristics of Wood Structures under Compression
An Innovative Technology for Measuring The Dynamic Characteristics of Pressure Sensors
Manufacturing of Cardiac Models Through Rapid Prototyping Technology for Surgery Planning
Micro Fabrication Design of a Planar Methanol Sensor
Preparation and Characterization of the Modified Carbon Nanotubes Enhanced Epoxy Resin Composites
Elastic Buckling Analysis of Die Fins during Extrusion
A New Class of Structured Light Patterns for 3-D Imaging Systems
A Molecular Dynamics Investigation into the Cooling Characteristics of Ni and Cu Alloys at High Pressure
Approximating the Minimum-Bounding Box of a 3D Model with Minimum Spans for Flush Edges
The Inverse Prediction of the Geometry of a Two Dimensional Plate with a Rectangular Cavity
An Interactive Web-Based Learning System for Manufacturing Technology Education
Performance Measurement of Implementing Manufacturing Execution System
Optimization of Component Placement Scheduling for SMT Assemblies
Vehicle Clustering Phenomenon in Automatic Materials Handling Systems in 300mm Semiconductor Manufacturing
Diagnosability of Semiconductor Manufacturing Equipment
Design and Implementation of Emulators for a Real-World Automated Manufacturing Systems Using Scenario
A Hierarchical Self-Organizing Neural Network for Automatic Wafer Defect Inspection
Prognostics for Ball Bearing Based on Neural Networks and Morlet Wavelet
Coordinated Motion Control of Large-Scale Transporter for Conveying Heavy Frame Components in Ship-Manufacturing
Accelerated Life Testing under Variable Synthetic Stresses for Hydraulic Pump
A CAD Idea of Braided Composite and Establishment of Its Relation Model
Performance Analysis of a Novel 6-DOF Parallel-Kinematics Machine with Decoupled Motion Characteristics
Comparison Study of Contouring Control Systems
Control of Micro Press Using Magnetic Actuating Platform
PID Tuning Rules for First-Order Plus Integrator Systems
Tracking Control of Automatic Pipe Cutting Robot with Magnetic Binder
Study of Hole-Machining on Pyrex Wafer by Electrochemical Discharge Machining (ECDM)
Polishing Glass-Ceramic Based Rigid Disk
Study on Thin Diamond Wire Slicing with Taguchi Method
Chemical-Assisted Mechanical Polishing of Diamond Film on Wafer
Surface Finish in Machining of Dental Ceramics
Combination of Spray Forming and Metal Powder Productions by the Internal Mixing Atomizer with a Substrate
Precision-Limit Positioning of a Linear Motor Nano Drive System
Design, Fabrication and Study of Micro-Electrospray Chips
Model Support Algorithm in Powder Based Three Dimensional Printer
Geometry Influence of Reflectors for Infrared Rapid Heating on Micro-Injection Molding
Contour Controller Design for Two-Dimensional Stage System with Friction
Prediction of Critical Blank-Holding Force Criterion to Prevent Wrinkles in Axi-Symmetric Cup Drawing
A 3D Slab Method in Cold Strip Rolling
Modelling of Friction Coefficient in Cold Strip Rolling
Modelling of the Development of Initial Crack under Hot Rolling Condition
Convolute Cut-Edge Design with a New Anisotropic Yield Function for Earless Target Cup in a Circular Cup Drawing
An Upper Bound Solution for Upsetting of Two-Layer Cylinder
A Study on Rotating Compression Forming of Ring Based on the Upper Bound Method
Influence of Casting Speed on Temperature and Flow Fields in Molten Pool during Twin-Roll Strip Casting Process