Advances in Materials and Materials Processing

Preface and Conference Organization
Chapter 1: Composites
Effects of Void on Physical Properties of Hygrothermal Conditioned CFRP
Flammability and Mechanical Properties of Intumescent Flame Retarded PP/EVA Composites
Preparation and Characterization of Graphene/RTV Silicone Rubber Composites
Role of Multiwalled Carbon Nanotube on Mechanical Reinforcement of High-Density Polyethylene
The Mechanical Property of CFRP Laminates with Voids
The Static Mechanical Properties of Carbon/Epoxy Composite Laminates with Voids
Compressive Behavior of Spark Plasma Sintered CNT Reinforced Al2124 and Al6061 Nanocomposites
Bentonite Composite and Fibre
Exploration of Al Matrix Composites Reinforced with Al-Ti Intermetallics/Ti Metal Compound Spherical Agents
Linear Defect States of Phononic Crystal Thin Plates - An Application of Finite Element Method
Effects of Delaminations on Vibration Characteristic for HT3/5224 Carbon Fiber Reinforced Laminated Plate
Electrical Property of Carbon Nanotubes/Epoxy Resin/Polyetherimide Composites with Inverted-Phase Structure
Fabrication and Microstructures of WC-Based Composites by Plasma Jet Metallurgy
Microstructure and Wear Properties of In Situ Production of (Fe,Cr)7C3 Particulate Bundles Reinforced Iron Matrix Composites
Preparation of High-Filled Talcum Masterbatch and its Application in Polypropylene
Selective Distribution of Carbon Black in Epoxy Resin/Thermoplastic Multiphase Composites
Thermal Analysis for Fiber-Reinforced Composites Containing Inhomogeneous Interphase Subjected to a Radial Constraint
Synthesis and Properties of Flame-Retardant Waterborne Emulsion Derived from O-Cresol Formaldehyde Epoxy Resin
A Comparative Investigation on Foamability and Structure of Al Foams Added with Precipitator and Cenosphere Fly Ash Particles
Mechanical Properties and Morphology of Long Glass Fiber Reinforced PP Composites
Hydriding Characterization of La2Mg17-Ni Composite Materials by Mechano-Synthesis
Preparation of TiC Hard Metal by Presssureless Infiltration Method
Character Alteration Research on Fe3O4 /PVA Susceptible Composite Film
Effects of PP-G-MA and Epoxy Resin on Morphology and Mechanical Properties of the PP/LGF Composites
Study on Properties of Epoxy Resin /Al2O3 Composites
Studies on Curing Kinetics of Epoxy Resin / Modified Amine System
Epoxy Resin (EP) / Nano-SiO2 Composite Material Preparation by Two Processes
Preparation of Stearic/Montmorillonite Composite as Form-Stable Phase Change Material
Simulations and Experimental Validation of Compression Properties of SiC/Fe-20Cr Co-Continuous Composites
Numerical Simulations of Uniaxial Compression Properties of SiC/6061 Aluminum Alloy Co-Continuous Composites
The Isothermal Simulation of the Un-Saturated Flow in the Dual-Scale Porous Media
Chapter 2: Micro/Nano Materials and Ceramic
Diameter-Controlled Synthesis of Single-Walled Carbon Nanotubes
Direct Electrodeposition of Highly Ordered Au-Cu Alloy Nanowire Arrays
Effect of High Shear Mixing Parameters and Degassing Temperature on the Morphology of Epoxy-Clay Nanocomposites
Effects of Processing Techniques on Morphology and Mechanical Properties of Epoxy-Clay Nanocomposites
Evaluation of Residual Iron in Carbon Nanotubes Purified by Air and Acid Treatments
Experimental Studies on Micro-Characteristics of Nanocrystalline MgO
Formation Mechanism of Polyaniline Nanostructures in PEG Solution
A Modified Monte Carlo Method for Phonon Radiative Transfer in Nanoscale Materials
Microstructure and Optical Properties of ZnS:Mn Nanocrystals
Scallion-Root-Shaped GaN Nanorods Grown by Two-Step Method and Study on their Properties
Synthesis and Characterization of Carbon-Encapsulated Nickel Nanoparticles from De-Oiled Asphalt
A Mild and Efficient Approach for the Reduction of Graphene Oxide
Compression Behavior and Mechanical Modeling of Nanocrystalline Ni under High Strain Rate Loading
Hollow Structure of CdSe by W/O Microemulsion Method
Preparation and Characterization of Micron Silicon Dioxide Spherical Particles
Preparation of Nitrogen Hybrid Ordered Mesoporous Carbons from Melamine-Phenol-Formaldehyde Resoles by Soft-Template Method
Study on a Preparation of PS Hollow Submicro-Fiber by Coaxial Electrospinning
Comparison between Dextran-Coated Superparamagnetic Iron Oxide Nanoparticles and Magnetoliposome on Rabbit Corneal Endothelial Cells Labeling
Preparation and Characterization of MnO2 Loaded CuO Nanosheets
Preparation of Fe (III) - Amidoximated PAN Nanofibers Complexes for Degradation of Azo Dye under Visible Light Irradiation
Synthesis of Chitosan-Stabilized Gold Nanorod Using Tripolyphosphate
Preparation of Nanoparticles of Calcium Oxalate Dihydrate
Preparation of Dandelion-Like Nano/Micro Zinc Oxide Material
The Research on the Photocatalytic Performance of one Kind of Nano Zinc Oxide
Molecular-Dynamics Simulation of Structure Change for a Molten Cu297 Nanocluster during Rapidly Quenching
Synthesis of ZnO Nanowires for Hydrogen Sensor Application Using Simple Heating Technique
Preparation and Characterization of Shellac/Polyvinylpyrrolidone Nanofiber as a Material for Medical Application
Stable Dispersed Graphenes Prepared by the Reduction of Graphene Oxides with Mercapto Acid
A Study on Crystallization of Fused Silica/Zirconia Ceramic Composites
Lamination of Green Ceramic Tapes in the Manufacturing of Multilayer Ceramic Devices
Performance Study of Composite Clay Instead of a Single Plastic Clay
Predicting the Mechanical Properties of Electric Porcelain Using ANN and MLR
Effects of the Content of ZrO2 Nanoparticles on the Microstructure and Properties of Al2O3-TiC-ZrO2 Micro-Nano-Composites
Research on Mullite-Corundum-Aluminium Titanate Composite
Research on Polymerization of PMN-PZT Piezoelectric Ceramic by Gelcasting Using NMAM System
Sol-Gel Preparation and Infrared Radiation Property of Zinc-Substituted Cordierite Ceramics
Size Influence on Magnetic Properties of Nickel Hollow Spheres
Preparation and Microwave Absorbing Performance of Co-Cu-Ni Ferrite/Multi-Walled Carbon Nanotubes Composites
Characterization and Properties of UV-Cured Epoxy Acrylate/POSS Nanocomposites
Facile Preparation of Polylactic Acid/Ketoconazole Composite Microspheres by Oil/Water Solvent Evaporation Method
Electrical Properties of Pt Nanowires Deposited with Focused Ion Beam
Structural Stability and Electronic Properties of Fe-Doped B13C2: First-Principles Investigation
The Preparation and Study of Graphene Supported CoxMn3-XO4 Nanocomposites as Advanced Oxygen Reduction Reaction Electrocatalyst
Shape-Controlled Synthesis and Pattern Recognition of Dendritic Co3O4 Superstructures
Oxidation Resistant of Silicon-Boron Pitch Carbonization Product
Study on the Influence of Porous Anodic Alumina Membrane on Separation of Hydrogen and Methane
Effects of Solid Content on Properties and Structure of PMN-PZT Green Body by Gelcasting
Characteristics of Alumina Films Formed by the Annealed Aluminum Films at High Temperatures in Air
Chapter 3: Polymers and Biomaterials
Rheological Properties and Crystallization Behavior of Poly(trimethylene Terephthalate) Blends with PBPCS
Preparation and Properties of Copolyimides Containing Fluorine and Alicyclic Group
Preparation of PMAM-B-PNVP and its Hydrolysate by RAFT Polymerization: Structure Characterization and its CO2 Permeation Performance
Synthesis of Cellulose-Graft-Poly (L-Lactide) via Ring-Opening Polymerization and Degradability Research
Screening and Identification of ?-Glucosidase Producing Strain of Fusarium Oxysporum
Study on Formula of New Type Flame Retardant Polyethylene
Study on the Preparation and Properties of the Phosphorus-Containing Flame Retardant PET Copolymer
Branched and Responsive Antimicrobial Polymers Based on Modified PVA for Functionalizing of Cellulose Fibres
Graft Copolymeriztion of Glycidyl Methacrylate/Styrene onto Polypropylene in Solid State
Maleic Anhydride Grafted Polymers Toughening and Flame Retardant Polystyrene Study on Modification
R-ATRP of Acrylamide under the Action of Copper Complex System in Aqueous Two-Phase
Study on Hydrolysis Conditions of Flavourzyme in Soybean Polypeptide Alcalase Hydrolysate
Study on Soybean Polypeptide Refining Process
Comparison of Different Extraction Methods for Antioxidant Property of Flavonoids from Pomelo Peel
A Novel Effective Y-Shaped Silicon Stent for Treating Canalicular Laceration
Extraction of the Pectin from Virginica Stem Bark and Study on its Structure and Composition
Synthesis and Properties of Biodegradable Liquid Crystalline Poly(ester-Urethane)s Based on Poly(L-Lactic Acid)
Preparation, Characterization of Substituted Aromatic Heterocyclic Phosphate Salts and the Application in Isotactic Polypropylene
Preparation and Research of the Multifunctional Heat Stabilizer with Rare Earth Used in PVC Products
The Microstructure of Polyurethane (PU)/Ethylene-Vinyl Acetate (EVA) Polymer Lastomer of Analysis
Zinc Hydroxystannate-Coated Mineral Grade Mg(OH)2 as Flame-Retardant and Smoke Suppression for Flexible PVC
Flame Retardant Low Density Polyethylene with Aluminium Hydroxide/ Commercial Fire Retardants FR01 Synergistic System
Construction of Dendritic-Linear Brushes on Silica Nanoparticles by Electrostatic Assembly
Study on the Optimization of Copolymerization Conditions of LASP/AA/AM Polymer
Nonisothermal Crystallization Kinetics of Isotactic Polypropylene Filled with a Novel Nucleating Agent
Assessment of Functionality of Aged Cables at Loading by Heat Flux
Experimental Research on Co-Gasification of Crude Glycerin and Corn Cob
Chapter 4: Optical/Electronic/Magnetic Materials
Microstructural, Optical and Electrical Properties of ZnO:Sn Thin Films Deposited by Sol-Gel Method
Optical Constants of Quartz Glass in 1.34-4.20?m Spectral Range
Optical Studies of Poly (N-Carbazole) (PVK) Blending with Polyvinylpyrrolidone (PVP) Using Tauc/Davis-Mott Model
Refractive Index Dispersion and Optical Dielectric Properties of Poly(N-Carbazole)/Poly(vinylpyrrolidone) Blends
The Potential Realization of Solar-Blind Ultraviolet Detecting Using ZnO-Based Alloy Thin Film
Two-Photon Absorption Properties of s-Triazine Derivatives With Near Octupolar Symmetry
Combustion Synthesis of CaMoO4:Eu3+, Li+ Red Phosphors Using Urea-Thiourea Mixture Fuels
Excitation and Emission Properties of Poly(N-Carbazole)/Poly(vinylpyrrolidone) Blends Characterized by Fluorescence Spectroscopy
First-Principle Calculation on Misfit Layered Cobaltite and La-Doped Series
Fluorescence and Energy Transfer in Er3+/ Nd3+ Co-Doped Oxy?uoride Tellurite Glass
Hollow Spherical CaMoO4:Eu3+, Li+ Phosphors Prepared by Spray Pyrolysis
Influence of Coating Content on the Magnetic Properties of Iron-MnZn Ferrite Soft Magnetic Composites
Preparation and Characterization of SrAl2O4:Eu2+ by Microwave - Combustion Method
Study of Structural and Electrical Transport Properties of Polycrystalline La1-XCaXMnO3 (x=0.33, 0.5 and 0.9) Prepared by a Co-Precipitation Method
Synthesis of High Brightness Red Long Persistent Phosphor (Sr 1-X Ca X)S: Eu, Dy by Sol-Gel Thermolysis Method
An Oxide-Diluted Magnetic Semiconductor: Co-Doped ZnO
First-Principles Calculation of Electronic Structure of the Cu-Doped Pyrite FeS2
Growth of ZnO Films on Si(111) by Metalorganic Chemical Vapor Deposition with AlN and Low-Temperature ZnO Double Buffers
Hydrothermal Synthesis and Photoluminescence Properties of Ca(MoO4)x(WO4)(1-X) Microcrystallines
Measurement Error of the Coercivity Hcj of NdFeB Permanent Magnet Caused by Air Gap
Numerical Simulation of the High Gain and Low Breakdown Voltage InGaAs/InP Avalanche Photodiode
Optical Properties and Defect Study of Ca2+ Co-Doping Lu2Si2O7:Ce3+ Single Crystal Scintillator
Preparation and Research on Luminescent Properties of Eu-Doped TiO2-ZnO Composite Powders
Preparation of CsI(Tl) Scintillation Film by RF Magnetron Sputter Method and its Structural and Optical Characterization
Study on Y3Al5O12:Eu3+ Phosphor Coated by Bi2O3
Exposure Schedule for Uniform Diffraction Efficiency of Partially-Overlapping Multiple Holograms in Dual Monomers Photopolymers
Fabrication of Silicon Nanowires by Electroless Etching for Thermoelectric Application
The Growth and Optical Properties of CdS Nanorods via Solvent-Thermal Route
Characteristics of Silicon Nanowire Field Electron Emission
The Study of Au/TiO2/Au Resistive Switching Memory with Crosspoint Structure
Novel Preparation Method and Luminescent Properties of Eu3+ Doped CdWO4 Nanorod
Combustion Synthesis of Nanocrystalline Y2O2S: Eu 3+ , Mg 2+ , Ti 4+ Red Long-Lasting Phosphors Using Mixture Fuel of Thiourea and Citric Acid
Study on Bilayer-Type ZTO Thin Films Prepared by MOCVD
A Novel Demultiplexing Photodetector with Integrated Vertical Conical Structure
Preparation and Properties of ZnO@ZnS Nano-Array Core-Shell Structure with Different Concentration of TAA
Chapter 5: Chemical Materials and Technologies
Synthesis of Diaryl Pyrrolones Derivatives as Combretastatin A-4
Mechanochemical Assisted Synthesis of Titanium Silicalite-1
Preparation of Controlled Release Urea and its Release Characteristics
The Effect of Density on Polyesterification Kinetics of Neopentyi Glycol/Maleic Anhydride System
An Investigation on Properties of Sn-SBA-16 Synthesized without Mineral Acid Added
Catalytic Dehydrogenation Reaction Activity of Cyclohexanol over Cu2O/Mg(OH)2 Catalysts
Development Toxicity and Degradation of Diethyl Phthalate
Phosphotungstic Acid, Silicotungstic Acid and Silicon Tungsten-Cobalt Heteropoly Acid with Bovine Serum Albumin Interaction
Study on Compound Corrosion Inhibitor of Aluminum in Salt System
The Parameters of Preparing Polyaniline Doped by Hydrochloric Acid
A Novel Formula of Diverting Acid System and Application
Preparation of Hollow Microsphere and its Application in Paper Coating
Preparation of Low-Sulfur Expanded Graphite with Different Size Particles
Comparative Study on Compositions of Oil-Water Transition Layer before and after ClO2-Treatment Process
Optimal Design for ASP of Mixed Surfactants with Rhamnoilpid
Thermal Degradation Study of Lithium and Potassium Iodide/Epoxidized Natural Rubber Polymer Electrolytes
Synthesis and Evaluation of a New Type of Cationic Gemini Surfactant
Characterization and Synthesis of a Betaxolol Hydrochloride Intermediate
Cu(OH)2/N-TiO2 Compound Heterojunction Photcocatalyst: Preparation, Characterization and Photocatalytic Properties
Preparation of Three-Dimensionally Interconnected Meso/Mesoporous Ho3+ Doped TiO2 Nanoparticles with Enhanced Photocatalytic Activity
Research on the Influence of PEG to the Nuclei Population Density of Copper Electrocrystallization
Preparation of La2(WO4)3 by Two Step Method and Characterization
The Synthesis and Characterization of Zinc Borate Zn2B6O11?7H2O
Synthesis and Characterization of Bridged Amine-Functionalized Mesoporous Organosilica Materials
A Density Functional Study of PdCn(n= 2-12) Clusters
Optimization of Membrane Electrode Assemblies Anode of a Micro Direct Methanol Fuel Cell by Mathematical Modeling
Chapter 6: Energy Materials
LiMn2O4 Prepared by Liquid Phase Flameless Combustion with F-Doped for Lithium-Ion Battery Cathode Materials
Combustion Kinetics Characteristics of Dry Distillation Coal Tar
Chapter 6: Energy Materials
Experimental Research on Producing Shale Oil through Thermal Cracking of Small-Particle Oil Shale
Structures of Li1+xMn2-XO4 Synthesized by Different Methods
Effect of Cr Doping on Electrochemical Performance of LiMn2O4
Electrochemical Behaviors of Different Gradesof Pure Aluminum in Alkaline Solution
Effects of Polyethylene Glycol on Agarose-Based Magnetic Polymer Electrolyte for Dye-Sensitized Solar Cell
Structure and Electrochemical Performances of LiFePO4/C Composite Cathode Coating with Different Carbon Sources for Lithium Ion Batteries
Study on Low-Temperature Oxidation Process of Low Rank Coal by In Situ FTIR
Synthesis and Performances of a Fe-Site Doped Lithium Iron Phosphate
Synthesis of (Ba,Ti)-Doped Apatite-Type Lanthanum Silicate Nano-Sized Powders via Microwave-Assisted Sol-Gel Auto-Combustion Route
Sheet-Shape Specimen Creep Behavior and Microstructure Analysis of Ni-Based Alloy C276 at High Temperature
Synthesis, Characterization and Electrochemical Properties of Li1+xMn2O4 Spinels Prepared by Solution Combustion Synthesis
Research Progresses of Two Kinds of Novel Electrolyte Lithium Salts: Lithium Bis(oxalato) Borate and Lithium Oxalyldifluroborate
Surface Passivation of Silicon Wafers by Iodine-Ethanol (I-E) for Minority Carrier Lifetime Measurements
Chapter 7: Iron and Steel
Alloy Design and Microstructure Control for the Production of Heavy Ductile Irons Used in Large-Scale Windmills
Corrosion Behavior of Low-Alloy Steel in COT Upper Deck O2-CO2-SO2-H2S Moisture Environment
Effect of Different Strain on Microstructure Evolution of Medium Carbon Steel
Effect of Phosphorus Contents on Texture and Grain Boundary Character for the Annealing High Strength Ti-IF Steels
Influence of Rare Earth on Microstructure of 20MnCrNi2Mo Wear-Resistant Cast Steel
Oxidation Behavior of a TP304H Stainless Steel in the High Temperature and High Pressure Water Vapor
Study on Metal Thermal Reduction of Caustic Calcined Dolomite Based Compound Desulfurizer
Continuous Cooling Transformation of Overcooling Austenite and Structure Evolution of Si Steel
The Evolution of M/A in Ultra-Low Carbon Bainite Steel
Sulfides Precipitation during Transformation of a High Sulfur Alloy Steel
Application of Frumkin Isotherm for Carbon Steel Corrosion in Soil Media
Transformation Behavior of Austenite Continuous Cooling of Nb-Ti Micro-Alloyed Low Carbon Steel
Effect of Ultrasonic Inoculation Treatment on Distribution of Sulphur in Fe-S Alloy
The Microstructure and Elements Distribution of High-Chiromium Hypereatectoid Steel by High-Temperature Homogenization
Study of V2O5 Direct Alloying Reductants
Process Design Strategies for Producing Heavy Section Steel with Improved Quality
Development of Domestic Prehardened Plastic Mould Steel
Study on Antibacterial Properties of SUSXM7 Cu- Bearing Austenitic Stainless Steel
The Evolution of Deuterium Bubbles in Iron under Electron Irradiation
Chapter 8: Metal Alloy Materials
Effect of Temperature on Structure of Outer Fe Oxide Layer of Fe-2.2Si Alloy
Effects of Alloy Composition and Annealing Treatment on the Performance of Aluminum Conductor
Effects of Ce, Mn, Cr on the Microstructure and Properties of High-Iron Eutectic Al-Si Piston Alloy
Effects of Si, Cu and Mg on the High-Temperature Mechanical Properties of Al-Si-Cu-Mg Alloy
Effects of the Aging Time and Temperature on the Microstructures and Mechanical Properties of 6082 Aluminum Alloy Extrusions
Influence and Theory Analysis of Ti, Zr, B on the Refining Effect of Aluminum Alloy
Effect of Heat Treatment on Microstructure and Mechanical Properties of A390 Alloy
Effects of High Co Contents in Fe-Cr-Mo-C-B-Y Alloy on the Glass Forming and the Mechanical Properties
Influence of Gd Content on the Microstructure and Mechanical Properties of Zn-Al-Mg-Si Alloy
Tensile Properties of a Cast TiAl Alloy with Directional Lamellar Microstructures
The Divacancy Formation Energy for B2 FeAl Alloy Simulated with Finnis-Sinclair many-Body Interatomic Potential
An Investigation on Grain Refinement Mechanism of Master Alloys Al-Ti, Al-TiC and Al-Ti-C Toward Pure Aluminum
Effect of Heat Treatment on Microstructure and Properties of Ti-6.5Al-1.5Mo-2.5V-2Zr Titanium Alloy
Effect of Si Content on Deformation Behavior of DC Cast Al-Si Alloys
Microstructure and Mechanical Property of the Directionally Solidified NiAl-Cr(Mo)-Hf/Ho Alloy
Research on Corrosion Rate Prediction of Aluminum Alloys in Typical Domestic Areas Based on BP Artificial Neural Network
The Precipitation Behavior of ?' Phase in Superalloy FGH96 during Continuous Solution Cooling Conditions

In Situ Study of Stress-Induced Martensitic Transformation in Ni47Ti44Nb9 Shape-Memory Alloys
Investigation of Porous NiAl Intermetallics Prepared by Self-Propagating High-Temperature Synthesis
Microstructure and Growth Behavior of the Intermetallic Compound for Sn-1.0Ag-0.5Cu-NiB/Cu Solder Joint Interface
Eutectoid Transformation in Zn Alloy with High Al Content
High Temperature Oxidation Behaviour of AlCuTiFeNiCr High-Entropy Alloy
Microstructure Evolution of Al-Ti-C Alloy Wires during Remelting Process
The Effect of Aging on the Corrosion Property of Al-7Si-0.3Mg
Precipitation Kinetics and Behavior of ? Phase in Inconel 718 Alloy
Research on Multiple Plastic Deformations of Ultra-High Strength Aluminium Alloy
Prediction of Electrical Conductivity of Cu-15Ni-8Sn-XSi Alloys Using the Physical Model and Artificial Intelligence Model
Preparation and Corrosion Resistance of Cu-Based Bulk Glassy Alloys
The Inhibiting Effect of Monoethanolamine on 6063 Aluminum Alloy in Sodium Chloride Solution
Efficiency in the Extraction of Pure Silicon from Al-Si Alloy Melts by a Combined Process of Solvent Refining and Centrifugation for Solar Silicon Feedstock
Research on Material Erosion Mechanisms of High Si-Al Alloy by Micro-EDM
Manufacture, Structure and Properties of Copper Foams
Chapter 9: Materials for Building and Structures
Experimental Measurements of the Selected Properties of AeroTherm
Influence Research on the Pretreatment of Recycled Coarse Aggregate to the Strength of Recycled Concrete
Research on Reinforced Concrete Column under High Speed Impact of Different Diameter Projectile
The Influence of Combined Admixture of Super-Fine Limestone Powder and Low-Quality Fly Ash on the Performance of Cement Mortar
The Temperature Distribution Research of Foaming Gypsum Mold in the Fabrication and Pouring Process
Utilizing the Waste Polystyrene to Enhance the Thermal Insulation of the Local Buildings
Analytical Model of Capillary Suction Velocity of a Pipe with Multiple Sizes
Research on Porous Properties of Air-Entrained Lightweight Aggregate Concrete
Study on BFRP Constrained Preloaded Concrete Square-Shaped Column
Study on Indoor Detecting Methods and Performance of Shotcrete
Design a Thermosetting Asphalt Mixture for Surfacing on Orthotropic Steel Deck Bridge
Influence of Aspect Ratio of Macro Synthetic Fiber on Mechanical Properties of Shotcrete
Research on Preparation Technology of Exposed-Aggregate Cement Concrete Pavement
Synergistic Effects and Cracking Bending Strength for Steel-Polypropylene Hybrid Fiber Reinforced Concrete
Use of Sugarcane Bagasse Ash as Raw Material in Production of Autoclaved Lightweight Concrete
The Influences on Cement Clinker by Disposing Glyphosate Waste Mother-Liquor with Rotary Kiln
Research Status on Fatigue Behavior of Reinforced Concrete Beams Strengthened with Fiber Reinforced Polymers
Tricalcium Silicate (C3S) Properties in Different Physical and Chemical Environment
Vibrating Mixing and the Improvement of Concrete Performance
Asphalt Material Aging Mechanism and Characteristics Analysis Based on Infrared Spectrum
The Experiment Research of a New Cementing Material Applied in Iron Tailing Filling
Chapter 10: Mechanics of Materials
Artificial and Natural Weathering of Chlorinated Polyvinyl Chloride (CPVC)
Effect of Moisture Content on Thermal Physical Properties and Heat Transfer of Plywood during Hot-Pressing
Failure Analysis of A7N01S-T5 Aluminum Alloy Buffer Beam for High-Speed Train
Review on Surface Failure Mode of Metallic Materials in Very High Cycle Fatigue Regime
The Effect of UIT on the Residual Stress of 7N01 Al-Alloy Welding Joints
Analysis of Indentation Size Effect of Vickers Hardness Tests of Steels
Experiment Study and Numerical Simulation of CFRP Sandwich Structure on Aircraft Ditching Model
Study on Cracking of Anchor Structure due to Reinforcement Corrosion
Study on the Electrometric Method to Measure the Young's Modulus of Metal Materials
Concrete Thermal Stress of Arch Dam in Construction Period of Stability against Sliding of Steep Slope Section
Failure Analysis on Natural Gas Transmitting Pipe Based on the Data of Intelligent Inspection
Integrity Assessment on Natural Gas Transmitting Pipe Based on the Finite Element Analysis
Testing and Evaluation of Comfort Performances of Mongolian Clothing Fabrics
Ultrasonic Nondestructive Evaluation of Composite Components Using Advanced Total Focusing Method
Damage Calculation and Fatigue Life Prediction for Freight Car Body
Reliability Analysis of Wear Casing Internal Pressure Strength
Research on Structural Fatigue Damage Based on the Superimposed Load Spectrum Method
Stress Analysis of Perforated Plate Based on ANSYS
Influence of Point Defects on Band Gaps of Fe-Epoxy in Two-Dimensional Phononic Crystal
Transmission Properties in 2D Phononic Crystal Thin Plate with Linear Defect
Research on CSP Work Roll Defect Causes and Improvement Measure
A Fretting Damage Analysis of Railway Axle
Dry Sliding Friction and Wear Behavior of Surface Hardened Ferrous PM Cam Materials for Automobile Applications
Failure Analysis on Strain Clamp on 220kV Transmission Line
Effect of Carbon Doped in BN on Electronic Structures and Mechanical Properties
Simulation and Analysis of the Wheat Stem Lodging
Study on Impedance Calculation of Viscoelastic Material in Acoustic Tube
Study on Tribological Behaviors of FeS Solid Lubrication Duplex Layer under n-Fe3O4 Additive Lubricating
Crevice Corrosion Behaviors of X52 Carbon Steel in Chloride Containing Solutions
A Research on the Stress Dispersion Property of the Warp Knitted Space Fabric
The Qualitative Analysis of Far-Infrared Fiber by Near-Infrared Spectroscopy
Determination of Boric Anhydride in Ascharite Ores by Inductively Coupled Plasma Atomic Emission Spectrometry
Surface Activity Research of Cationic Gemini Surfactants
3D Generalized Beam (GB) Lattice Model for Analysis of the Failure of Concrete
Dynamic Stress and Deformation of Non-Homogeneous Poroelastic Moderately Thick Shells of Revolution Saturated in Viscous Fluid
High-Temperature Deformation Characteristics of a SA516GR70 Vessel Steel
An Optimized Design Method for Thickness of Shells with Multi-Holes Based on Finite Element Method Theory
Numerical Analysis of a New Test Method for Evaluating the Mechanics Characteristics of Steel Deck Pavement
A New Stress Mathematical Model of Deformation Zone while Straightening Thin-Walled Tube
Segmented Optimization Design of Aluminum Alloy Goal Crossbar Based on FEM
Flexural Behavior Characteristics of UHPC According to Twisted Steel Fiber
Fatigue Life Prediction of Welded Case Shell on Aeroengine under Combined Internal Pressure and Axial Loads
Study on Bearing Behaviors of Bolted Joints in Composite Laminates
Analysis of Structural Parameters for Unbonded Flexible Pipes
Design and Cut Skills in Accordance with the Physical Properties of the Gem Stones
Chapter 11: Environmental. Research, Friendly Materials and Recycling Waste Technologies
A New Comprehensive Utilization Method for Coal Gangue: Preparing Alite-Sulphoaluminate Cement
Catalytic Hydrolysis of CCl2F2 over Solid Base CaO/ZrO2
Dissolution and Regeneration of Reed Leaf Fibers in Imidazole-Based Ionic Liquids
Effects of Molybdenum Doping on Optical Properties of Sm0.3Ce0.7O1.85
Effects of Nano Particle Hydroxyapatite on Cadmium Bioaccumulation and Translocation in Pakchoi (Brassia chinensis) from Cadmium Polluted Soil
Experimental Study of Thermal Plasma Processing Waste Circuit Boards
Preparation and Characterization of Alginate/Polyvinyl Alcohol Composite Fibers Containing Copper Ions
Study of Reed Leaf Fibers' Degumming in High Temperature and Pressure
Treatment of Cationic Dye Wastewater with Hybrid Sorbent Generated by Anionic Dye Wastewater Hybridization with Calcium Fluoride
Photoelectrocatalytic Degradation of HCB by N-Doped TiO2 Nanotube Arrays
QSAR Study of the Adsorption Mechanism of Ascorbic Acid towards Iron in Alkaline Media
Study on the Performance of Orange Oil Cleanser
The Preparation and Characterization of Starch Oxidized by Nitric Acid and its Properties of Calcium Complexing Capacity
Removal Chromium and Turbidity Using Starch Derivative Flocculant CSAX
Synthesis and Paclobutrazol Visible-Light Degradation of Al/S Doped TiO2 Mesoporous Materials with Pyridine as a Template
Use of Rice Husk Ash to Treat Simulated Agricultural Cultivation Wastewater
Effects of Recycling Ladle Lining Materials on Phase Composition and Microstructure of Al2O3-SiC-C Castable for Iron Runner
Effects of Recycling Ladle Lining Materials on Sintering Performance of Al2O3-SiC-C Castable for Iron Runner
Treatment of Chlorobenzene Containing Wastewater by Titanium Oxide Photocatalyst
Evaluation of the Leaching Behavior of Hexavalent Chromium from Malaysian Electric Arc Furnace Steel Slag
Simultaneous Nitrification and Denitrification in Biofilm-Electrode Reactor
A Preliminary Investigation on the Preparation of Bagasse Fly Ash as Clarifying Aid for Clarification of Cane Juice
Assessment of Degree of Maturity of Compost Produced by Different Kitchen Waste Composting Methods
Study on Spectrophotometric Determining Trace Tetracycline by Phase-Separation Floatation
Experimental Study on Cr6+ Adsorption in Water about Corncob
Spatial Distribution in Forest Soil Nutrients and its Relationship with Ecological Factors on the up Stream of Taihu Lake Basin
Study of Thermal Degradation of Polymers
Seasonal Soil Freezing Characters in Daxinganling
Experiment and Analysis on Temperature Distribution of Straw Double-Grate Briquette Boiler Furnace-Tank
Heteropolyacid Photocatalytical Degradation of Atrazine in Aqueous Solution under UV-Irradiation
Investigation on the Electrochemical Behaviors of Phenol Oxidation on GCE (Glassy Carbon Electrode)
Study on Preparation of Iron-Based Flocculant by Hydrogen Peroxide Oxidation Process
Research on Cavitation and Impinging Stream Microelectrolysis Reactor for Treating Organic Wastewater
The Influence of Rainwater Reuse on Urban Water Circulation and Downstream Eco-Environment
The Evaluation of Photocatalytic Properties of Iron Doped Titania Photocatalyst by Degradation of Methylene Blue Using Fluorescent Light Source
Research on Characterization and Application of High-Performance Ion Exchange Material
An Evaluation Method of Water Resources Carrying Capacity Based on Projection Pursuit Model
Chapter 12: Surface Engineering/Coatings
Research of the New Composite Solid Lubricant Coating
Improving Anti-Aging Coatings by Coupling of Organic and Inorganic Ultraviolet Absorbers
Dielectric and Tunable Properties of Lead Barium Strontium Titanate Thin Films Fabricated by Radio Frequency Magnetron Sputtering Method
Chapter 12: Surface Engineering/Coatings
Study on Corrosion Wear Behavior of 70 Aluminum Alloy Anodic Oxide Coating
Effect of Hydrogen Dilution on Properties of Microcrystalline Silicon Thin Films Prepared by VHF-PECVD
Quantum Size Effects of Chemical Bath Deposited ZnSe Thin Films
W-Doped Vanadium Oxide Thin Films Prepared by Reactive Magnetron Sputtering
Effects of Cu Addition on Microstructure and Adhesion Properties of Ti-Al-N Nanocomposite Films Deposited by Magnetron Sputtering
Influence of Rare Earth on the Peeling Properties of Ultra-Thin Copper Foil with Carrier
Mechanical Instability of Wedge-Shaped Cr Films Quenched by Silicone Oil during Deposition
Solution-Based Metal Induced Crystallization of Amorphous Silicon Films
Dependence of the Coating Carbon Layer Configuration of Cordierite Monolith on Coating Reaction Conditions in Methane Decomposition
Investigation of Corrosion Resistant of Al-Zn-Si-Re-Mg Coating
Microstructure and Wear Properties of TiC/Fe-Based Composite Coating Prepared by PTA Weld-Surfacing Process
Microstructures and Wear Resistance of Si-Al-Y Co-Deposition Coatings on ?-TiAl Alloy
Study on Surface Modification of Aluminum Alloys by Silicate-Based Hybrid Coating
The Investigation of Abrasive Jet Polishing on the Linear Micro-Channels Surface of SKD61 Mold Steel
The Property Comparison of Coating Prepared by Oxygen-Acetylene Spray Welding Technology and High-Frequency Induction Remelting Technology
Comparative Study of the Cyclic Oxidation Resistance of NiCrAlY and NiCoCrAlY Coatings
The High Temperature Oxidation Resistance and Anti-Oxidation Mechanism of Plasma-Sprayed NiCrAlY Coatings on Stainless Stell
A Porous TiO2 Coating with Vermiform Morphology Formed on Ti through Micro-Arc Oxidation
Effect of Atmosphere Composition on Lifetime and Oxidation Behavior of EB-PVD TBC with NiPtAl Bondcoats
Effect of Thermal Cycling on Lifetime and Failure Mechanism of EB-PVD TBC with NiCoCrAlYZr Bondcoats
Effects of Conductive Pigments on the Anti-Corrosion Properties of Zinc-Rich Coatings
Electrodepositing Ir Film at Constant Current in NaCl-KCl Molten Salts
Evolution of Microstructure and Properties of a Disk Cutter Ring Material during Carburization and Heat Treatment
Experimental Investigation on Anti-Fatigue Function of Gear Surface with Grid Micro-Morphology
Hydrothermal Synthesis of Lead Titanate Epitaxial Film for Non-Volatile Memory Device Application
Synthesis and Surface Properties of SiO2 Modified Fluorosilicone Acrylic Copolymer Hybrids
Interfacial Failureof SiN/GaAs Film/Substrate BilayersInduced by Nanoscratch
Ni-P-Diamond Composite Coating on Friction Shims
Microstructure Characteristic of Laser Cladding Ceramic Layer on High Cr Cast Steel Surface
Preparation of Superhydrophobic Coating from Fluorine-Containing Acrylate Polymer and Polysiloxane with Nano-SiO2
Electrochemical Corrosion Behavior of Corrosion-Resistant Steel for Cargo Oil Tank
Effects of Friction Load and Ultrasonic Vibration on the Tribological Properties of Al2O3/Al2O3 Ceramic Friction Pairs under Liquid Paraffin Lubrication
Research on the Microstructure and Performance of Co-Based Alloy Surfacing Layer
Fabrication of YBa2Cu3O7-? Superconducting Film on NiW Alloy Using Electrophoretic Deposition
Effect of Laser Cladding Al3Ti-Based Coatings on the Wear and Corrosion Resistances of AA6063 Aluminum Alloy
Application of WS2 in Solid Lubricant Coating for Metal
Electroless Ni-P Plating on Mg-7Al Alloy by Chemical Conversion Pretreatment
Synthesis and Characterization of New Mesoporous Silica Film Materials for Explosive Detection
Molecular Dynamics Simulation of the Influence Factors of Particle Depositing on Surface during Cold Spray
Chapter 13: Materials Forming
Simulation of Microstructure Evolution on Copper, Aluminum and Alloy during ECAP
Comparative Study on Compression Deformation Behaviors of Cast and Extruded AZ31 Alloys
Dynamic Strain Aging during Tensile Deformation of Extruded AZ81 Magnesium Alloy
Die Wear Analysis of Spur-Gear Shaft Hot Extrusion Process
Forging Effect of Horizontal V - Shaped Anvil for Heavy Axial Forgings
Influence of Temperature Difference on Front End Bending in Hot Slab Rolling
Development of Cyclic Rotating Bending Process for Microstructure Control of AZ31 Magnesium Alloy Tube
FEM Analysis of Glass Lens Molding Press
Research on Finite Element Simulation and Test of Two-Pass Deep Drawing Forming for Conical Parts
A Study on Initial Blank Design to Minimize Earing in Multi-Stage Deep Drawing Process for Rectangular Cup Using High Strength Steel Material
Deformation Behavior of AZ31 Magnesium Alloy at Elevated Temperature
Development of Radial-Axial Ring Rolling Experimental Equipment and Calculation of Ring Rolling Forces
Extrusion of Powder/Solid Clad Rods for a Desirable Hole Ratio in Powder Region
Heat Spinning Deformation Technology of 7A04 Loading-Wheel
Statistical Study on Correlation between Design Variables and Shape Errors in Flexible Stretch Forming Process
Study on the Slab Design of Medium Plate Hot Rolling
Surface Roughness Analysis of Metal Spun Parts
The Design and Simulation of Circuit for Electromagnetic Force Assisted Line Heating Device
Numerical Simulation of Large-Sized Pure Aluminum Rod under Multi-Pass ECAP
Impact Analysis of Microstructure Evolution in Hot Rolling of H-Beams
Optimization of Pre-Forging of the Aircraft Wheel Hub by FEM
Analysis of Linear Defects of Cold-Rolled Galvanized Sheet
Study on Developing Q345XJ by UFC in the CSP
The Mathematic Model of Deformation Resistance of S50C Medium Carbon Steel in Hot Rolling Process
Simulation of Die Gap Variation in Temperature Field Distribution of High Strength Steel Hot Stamping Process
Simulation and Optimization of Die Forging Process for High Pressure Valve Bonnet
Work Roll Temperature Prediction Model in Hot Strip Mill Based on Two Dimensional Alternating Difference Method
Analysis of Effect of Process Parameters on Warpage of a Automobile Bumper Injection Molded Parts
The Numerical Model of Axial Force for 4-High Mill
Research on Deformation of TC4 with Complex Profile in Hot Rolling
A Novel Three-Dimensional Direct Controlled Cell Assembling System
The Hot Pressing Process Optimization of Ti(C, N) Matrix Nano-Composite Ceramic Die Materials with the Back Propagation Neural Network and Immune Genetic Algorithm
A New Method for Quantitatively Evaluating Defects of the Green Body in Injection Moulding Based on X-Ray Digital Radiography
Modeling Powder Extrusion Pastes for Forming 410L Stainless Metallic Honeycombs
Chapter 14: Materials Machining
Research on the Cutting Characteristics of Coated Tools on End Milling Nickel-Based Superalloy Mar-M247
The Identified Principle of Machining Conditions and its Application in NC Machining
The Theoretical Analysis and Application of the Ultra-Precision Machining the End Surface of Stop Valve's Valve Flap with the Diamond Facing Tool
A Dynamic Observation Concept to Keep Water-Soluble Coolant in Normal Condition for Long Time
A Visualization Study of Abrasive Flow Variation in Abrasive Air Jets
Dry Machining of T6061 Aluminium Alloy Using Titanium Carbonitride (TiCN) Coated Tools
Effects of Mixing Chamber Shape on Cutting Performance in Abrasive Water Jet
Evaluation Influences of Residual Stress on Machining Aluminum Part of Cooling Plates
Experiment Studies of Nd:YAG Laser Assisted Dressing Technique for Metal-Bonded CBN Grinding Wheel by Crankshaft Grinding
Influence of Tooth Errors and Truing Principles of Grinding Wheel Abrasion for Machining Arc Enveloping Worm
Micro-Channel Fabrication on Quartz Crystals by a Micro Abrasive Air Jet
Microgrooving Using an Ultrafine Wire Tool
Study of the Wear of Drills in Dry Drilling of NM360 Steels
Analysis of Plunge Milling Force and Tool Deformation on Cr12
Determination of the Cutting Area Considering the Tool Slenderness Ratio for the Development of a 5-Axis Impeller Machining Automation CAM Module
Experimental Research the Cutting Force of the 40Cr Circular Cone Turning
Influence of Dielectric Jet Flushing during Electro Discharge Diamond Surface Grinding Process
Modeling and Experimental Study on Cutting Force of Diamond Circular Saw in Cutting Granite Using Response Surface Methodology
Study on Arithmetic of Surface Damage Ratio in High Speed Machining of Graphite Based on Matlab Image Processing
Wear Mechanism of PVD TiAlN Coated Cemented Carbide Tool in Dry Turning Titanium Alloy TC4
Research on Grinding Temperature of a New Diamond Grinding Wheel
Study on Micro-Topography Characteristics of EDM Surface
A Kind of Optimization Model on Turning Process Based on Productivity and Cost
Recent Development of Parameter Optimization for Metal Cutting and Grinding Processes
Research on Tool Wear Rate of Powder Mixed near Dry Electrical Discharge Machining
The Study of Silica Sol with Great Particle Size for the SiO2 Dielectric CMP
Analysis of the Vibration Mechanism in the Turn-Milling Machining of Micro-Miniature Shafts
Chapter 15: Welding & Joining
Atmospheric TIG Arc Diagnostics with a Low Disturbance Electrostatic Probe
Corrosion Resistance Prediction of Laser Tailor-Welded Blank Based on Partial Least Square
Distribution of Magnetic Flux Density and Magnetic Force in EMR
FEA Simulation of Clinching Process Based on GTN Damage Model
Influence of 0 Degree to the Shoulder of the Friction Stir Welding on AA 6063 and AA 7075
Measurement of the Surface Tension of Liquid Metal-Droplet in Arc Welding
Prediction and Control of Weld Width of Deep Drawing Steel Laser Tailored Blanks
Research on Repair Welding Processes of a Bainite Steel Frog
Research on the Usability of the Defective Grid Structure
Effect of Current Waveform on Droplet Oscillation in GMAW
Effect of the Wire Temperature on the Weld Formation in GMAW
Effect of TiH2 Composition on Porous Stainless Steel and Titanium Hydride Composite Synthesized by Spark Plasma Sintering
Prediction Model of Droplet Size in Low-Current GMAW
Prediction of Welding Deformations of CRH380 Aluminum Alloy Side-Wall with Equivalent Thermal Load Method Based on Inherent Strain
The Compulsively Short Circuiting Transfer Phenomenon Study in Rotational Arc MAG Welding
A Study of Material Flow Behavior in Thickness Direction in Friction Stir Welding of 7075 Alloy Plate
Dissimilar Friction Stir Spot Welding without Key Hole between AZ31B Magnesium Alloy and 5052 Aluminum Alloy
Optimization of Parameters and Research on Joint Microstructure of Resistance Spot Welding for 316 Stainless Steel
Characteristics Evaluation of Weld Metal Zone Welded with Various Repair Welding Filler Metals
Evaluation of Effect of Welding Methods to Corrosion and Hardness Characteristics of Welded Zone
Research on Three Microcosmic Interface Defects of Titanium/Steel Laminates Manufactured by Explosive Welding
Simulation Research on Relieving Welding Residual Stress by Vibratory Stress Relief Technology
Effect of Welding Parameters on Temperature Field during Twin-Wire Submerged Arc Welding of X80 Pipeline Steel
Prediction of Weld Parameters in Gas Metal Arc Welding Process Using Curve Arc Fitting Techniques and Graphical Methods
Chapter 16: Laser Processing
Experimental Investigation on Femtosecond Laser Ablation of Polycarbonate
Experimental Study of Low-Pressure Water Jet Assisted Laser Processing of Al2O3 Ceramic
The Optimization Study about Technological Parameters of YAG Laser Precision Cutting Stainless Sheet
Ultrafast Laser Machine Based on All-Fiber Femtosecond Laser System
Characterization of TC17 Titanium Alloy Treated by Square-Spot Laser Shock Peening
Laser Processing Speed vs Morphology of Glazing Ceramics
Experimental Research on Flight Trajectory of Edge Electron of the Electron-Beam in the Electron Gun of Furnace
Study of Displacement Value of the Electron-Beam in the Electron Gun in Electron-Beam Furnace
Chapter 17: Casting and Solidification
Microstructures and Properties of Twin-Roll Casting 7050 Aluminum Alloy Strip
Effect of Casting Design to Microstructure and Mechanical Properties of 2 Mm Twdi Plate
Effect of DC Casting Processes on Microstructure of AlCu4.5Mn0.8 Alloy
Grain Refinement of 6061 Alloy by Low-Voltage Pulsed Magnetic Field Treatment
Effect of Annular Electromagnetic Stirring Process on Solidification Microstructure of 7075 Aluminium Alloy
Effect of Magnetostatic Field on Microstructure of 7075 Aluminum Alloy Strip Manufactured by Twin-Roll Casting
Influence of Different Roll Casting Conditions on Casting Microstructure
Simulation of Bridgman Directional Solidification Microstructure Using Phase Field Method
Application of the Dynamic Soft-Reduction Technology on the No.4 Slab Continuous Caster of Bayi Steel
Effects of Argon Partial Pressure on Interfacial Shape of Porous Copper under Unidirectional Solidification
Numerical Simulation on Mold Electromagnetic Eccentric Stirring and Central Segregation of Round Bloom
The Study on Microstructures and Properties of the Direct Squeeze Casting Al-Zn-Mg-Cu-Zr-Sc Alloy
Die Casting Mold Design of Auto Oil Pump Bracket
Analysis of Elemental Segregation in a Microalloyed Cast Steel
Chapter 18: Geology and Mineral Processing
Mineral Processing Experiment of Copper Mineral in Yunnan Province
Mineral Processing Experiment of Quartz from Gold Ore Tailing
Analysis of Tight Gas Reservoir Forming Condition in Gulong-Changjiaweizi Region, Northern Songliao Basin
Shale Gas Seepage Mechanism and Pressure Dynamic Characteristics Research
Geological Evaluation of Puzzle Reservoirs in Putaohua Reservoir of Weixing Oilfield
Hydrocarbon Accumulation Characteristics in Cretaceous System Hailaer Basin
The Analysis of Sedimentary Evolution Mode of Denglouku-Formation in Gulong Area of Songliao Basin
The Optimal Selecting Technique on Well Logging Items and its Application to Identify Complex Lithology Profile
Sedimentary Characteristics in Zhalainuoer Group in Cano Depression Hailaer Basin
Stratigraphic Sequence Framework of Zao IV Group in Zaobei Oilfield
Preparation of Ammonium Tungstophosphate-Calcium Alginate Composite Adsorbent and its Adsorption Properties of Rubidium
Potential Indonesia Ores as Raw Material for Producing Iron Nugget
Fractal of Grain Distribution in Sintered Ore with Variable Brazil Iron Ore
Study on the Effect on Sintering Mineralization of Iron Ore
Thermodynamic Studies on Selective Oxidation of Nb, P and C in Dephosphorization of Low Niobium Hot Metal
Experimental Study on Carbothermic Reduction of Magnesia with Different Carbon Materials
The Practice of Strengthening Pulverized Coal Injection
The Investigation between Sedimentary Facies of Middle Cambrian and the Characters of Volcanic Rock, in Wenshan, Yunnan Province
Analysis of Physical Structure and Chemical Composition of Oil-Water Transition Layer in Oil Gathering and Transportation System
Resourcing Utilization of High Alumina Fly Ash
Experimental Research of Fluorite Flotation Separation
Comparison of Thermal Decomposition Kinetics of Magnesite and Limestone
Experimental Study on the Recovery of Apatite from Ore Tailings in Hebei