Manufacturing Science and Materials Engineering

Preface and Organizing Committee
Chapter 1: Advances in Manufacturing Engineering Techniques and Materials Science
The Research on Applying High Precision Ultrasonic Ranging in the Auto-Levelling System of Paver
Modeling Hot Rolling Based on RBF Neural Networks and Thermo-Mechanical Coupling FEM
Prediction of Settlement of Soft Clay Foundation in Highway Using Artifical Neural Networks
Influence of Cutter Geometric Parameters on the Stability of Milling Process of Thin-Walled Blades
Identification of Natural Frequency of Bearing Rotor Based on GA-SVM
Concrete Compressive Strength Prediction Using Rebound Method with Artificial Neural Network
Fiber Grating Sensor Temperature Prediction Based on Relevance Vector Machine
Influence of Inner Rubber Bushing Stiffness of the Lateral Rod on Rear Multi-Link Suspension Performance
Approach to Detect Air Tightness of Engine Cylinder by Vibration Analysis
Studies on Solar Drying of Oily Sludge
Design and Modeling of Cutting Paper Tape Machine for Sole Coating
GA-BP Neural Network Based Tire Noise Prediction
FLI Co-Simulation Applied and Realized in Rail Profile Automatic Detection System
Micro-Image with Photo-Acid Generator Polymer Nano Sheet
Dynamic Prediction Model for Rolling Bearing Friction Torque Using Grey Bootstrap Fusion Method and Chaos Theory
Evaluation of Tapered Roller Bearing Vibration Velocity as Data Series Using Grey System Theory
The Research on the Flexible Integrated Research Platform of the Solar Energy Photovoltaic System
The New Rural Residential Building Materials of Low Carbon Mode of Thinking
Resonance Frequency Detection System of Piezoelectric Micro-Cantilever
Design and Implementation of Integrated Case Packer Based on High Speed Pick-and-Place Robot
The Influence of Cutting Parameters on Machined Surface Microhardness during High Speed Milling of Titanium Alloy TC17
The Effect of Cutting Parameters on Machined Surface Microstructure during High Speed Milling of Titanium Alloy TC17
Numerical Analysis of Submerged Pipelines for Deep Water S-Lay
MEMS Gyro Aided Calibration of Electronic Compass
High Accuracy AMR Magnetometer and its Application to Vehicle Detection
The Application of Linear Variable Filter to Improve the Resolution of Micro Spectrometer Systems
The Study of Residual Stresses in High-Speed Milling of Titanium Alloy TC11
Application of Constant Modulus Algorithm on the Civil Aviation VHF Radio Interference Suppression
Research on the Mathematics Model of a Permanent Magnet Linear Oscillatory Actuator with Moving Iron and Non-Salient Pole
Flapping Wing Micro Aerial Vehicle Attitude Control with Fuzzy Sliding Mode Controller Based on RBF Neural Network
Supply and Demand Forecasting of Blast Furnace Gas Based on Artificial Neural Network in Iron and Steel Works
The Research on Energy-Storaged Application of Na/S Battery
Selection of Mixed Refrigerant for CBM Liquefaction System and its Optimization Analysis
A Novel Miniature Printed UWB Monopole Patch Antenna
Research on Path Optimization Technology for Free-Form Surface Five-Axis NC Machining
Research on Fuzzy PID Adaptive Control for Steam Generator Water Level
Physical Design of Hydraulic Synchronizer about Lifter
Reconfigurable Testing System for Automobile Parts and Equipment
The Robot Handling System for Coal-Fired Power Station Furnace Coke and Slag
Research on Filament Composite Winding CNC/TCS Integration System Based on Open-Architecture
Fault Diagnosis of Aircraft Power Supply Based on Priority Dynamic Fault Tree
Doppler Frequency Shift Tolerance Extension in Burst Spread Spectrum Communication System
Development of the Natural Vegetable Gum Drilling and Completion Fluids System for Industrial Intelligent Application
Dynamic Simulation and Control Research for Special Shipborne Crane Based on ADAMS
Method Study on Digital-Model Conversion of Magnetic Worm from CAD Software to ANSYS Software
Decoupling Robust Control of Three-Link Direct Drive Robot Arm
Analysis on the Mechanical Behavior of Pipe Roof and Rock Bolt of Shallow and Unsymmetrical Tunnel in Soft Rock
Research of Electronic Energy Saving Control Technology in Construction Machinery
Primary Study on Crop Wet Biomass Measuring with Dielectric Spectroscopy
A New Anti-Surge Control System for Underwater Vehicle
Delivering Way of Horizon Disturbance to Vertical Vibration in Temper Rolling Mill
Partial Postponement Strategy: Application in Automobile Manufacturers
Nonlinear Calibration of Thermocouple Sensor Using Least Squares Support Vector Regression
Study on Piezoelectric Effect of Ceramic Capacitors in Daya Bay Neutrino Experiment
Implement of Electro-Hydraulic Servo Control of Aero Variable Stroke Plunger Pump
Non-Math-Modelling Data Analytical Methods Base on Artificial Neural Networks (ANNs) Applied to Optimize Preparation of Norcantharidin-Loaded Chitosan Nanoparticles
Study on Non Energy Saving Status Detection of Groundwater Heat Pump System Using Artificial Neural Network Method
Study on the Optimization of Multi-Factor Influencing Ice Thermal Storage Air Conditioning System Economy
Techniques for PAPR Reduction in OFDM Systems
Abnormality Detection Methods for Airborne Equipment's Working Performance Based on ?2 Distribution Model
Design of Image System Based on Textile Application
Ka Band Transition between Rectangular Waveguide and Substrate Integrated Waveguide
Study on Fluorimetric Method Determination of Glucose Molecule in Microchannels
Resource Optimization Scheme Based on ROI Distortion-Minimized for Mobile Image Transmission
An Implementation of CANopen at Water Electrolysis Hydrogen Generation Station
Investigation on the Bending Deformation of the Stainless Steel Fibers during Knitting Action by Using Image Processing Method
The Research of Mica Pulp Concentration Detecting which Is Based on Laser with 650nm Wavelength
Electrostatic Precipitator Monitoring System Based on CAN Bus
Superheater Steam Temperature Control Based on the Expanded-Structure Neural Network Inverse Models
Structural Optimization of Woven Fabric with Curved Surface
Fractal Prediction of Porosity in Clastic Rock Based on GIS
A Liquid Level Measuring Device for a Tank Based on Image Senor
Pollutant Transport Model and Numerical Simulation in Landfill Site
Prediction of Pilot Pollution in High-Rise Buildings Covered by Outdoor Base Station
Study on Bilinear Interpolation Preisach Model of Piezoelectric Actuator
Application of Adaptive Weighted Fusion in Robot Multi-Sensor Ranging System
Infrared Object Tracking Algorithm Based on Online AdaBoost
Non-Fragile Robust Controller Design for Nonlinear Stochastic System with Time-Delay
Computer Simulation of Pitting Machine Shaft of Litchi Fresh Fruit
Interface between LabVIEW and FANUC Robot
Study on 3D Modeling for History Building and Precision Analyzing
The Application of Circle Fitting in Detection of Machining Quality of Punched Sheets Based on Machine Vision
Technology for EDFA Gain Flattening Based on Long Period Fiber Grating
Research on the Multi-Spectrum Imaging System Based on Vision Technology
Model Simulation of Electronic Unit Pump Diesel Engine Oriented to Control
Lapel Shaper Parametric Design for Automatic Liquid Packaging Machine Base on Visual Lisp
Analysis on Dynamic Lubrication Characteristics of Gas Film in Hard Disk System
DNA Computing Model Based on Self-Assembled Nanoparticle Probes for SAT Problem
A Transmission Control System's Research for a Nursing Bed with Four Transmissions Driven by a Single Motor
The Developing of Double-Wave-Bands Phototherapy
A New Wave-Wheel Dishwasher Control System
Automatic Coal Mine Anti-Dusty Water Sprayer Controller Design
Knee Bone Surface Registration Using the Lipschitz Optimization Algorithm
A New Wavelet Transform Modulus Maximum Denoising Algorithm for UWB System
Application of Double Closed-Loop Control to the Steady-State Regulation and Control of Underwater Vehicle
General Modularized Design (GMD) for the Agile Design of Crane Drum
Wavelength Adaptive Assignment Scheme for Optical Transport Network in Intelligent Highway System
Study on Online System for Strength Detection of Laminated Veneer Lumber Based on Vertical Vibration
Development of Omni-Directional Mobile Manipulator
Research on Simulation Model and Application for Flexible Manufacturing System of Hot Stamping
Compressive Plasticity of Zr-Based Bulk Metallic Glass at Low Temperature
Chapter 2: Optical, Electronic Materials and Industrial Application
Powder Particle Size Measurement with Digital Image Processing Using Matlab
Effect of Cycles and Ion-Exchange on the Purification of Lithium Carbonate
Formation and Control of Cutting Direction Burr in Machining
Study on the Performance of Braze Cemented Carbide Cutting Tool
Research on Gear Shift Drive Mechanism of Automatic Mechanical Transmission Based on Brushless DC Motor
Effects of Initial Axial Stress on the Vibration of Double-Walled Carbon Nanotubes under Temperature Field
Dynamic Models of Stability Lobes of Milling Thin-Walled Plates
New Method of Dynamical Reanalysis for Large Modification of Structural Topology Based on Reduced Model
Low Temperature Performance of Fiberglass Geogrid
Application and Characterization of 12-Phase AC Arc for Glass in-Flight Melting
A Bargaining Theory-Based Conflict Resolution Method in Design for Remanufacturing
Calculation of Radial Active Magnetic Bearing Electromagnetic Force under Eccentric Rotor
Effect of the Y2O3 Addition Content on the Structural Properties of ZrO2 Thin Films and Coating Material
Effect of Ultrasonic Treatment on the Functional Properties of Whey Protein Isolates
Development of Whole Life Cycle Management System on Cutting Tool
Optimization of Inlet Temperature of Methanol Synthesis Reactor of LURGI Type
Strength of Screw Thread in Vibration Tapping
Numerical Simulation of Sheet to Cylindrical Tube Single-Sided Spot Welding
The Analysis of the Application of Copper Plated Steel Material in Substation Grounding Project
Dynamic Analysis of Nonlinear Anti-Resonance Vibration Machine Based on General Finite Element Method
Effect of UF/Epoxy Microcapsules on Cement Composite
Virtual Prototype Design of Remote-Control and Mobile Tea Table
Wind Turbine Generator Pitch Simulator's Design
Structure Optimization of Ship Unloader for Weight Reduction by FEA
Longitudinal Aerodynamics of a Canard Guided Spin Stabilized Projectile
Rescheduling of Parallel Machines under Machine Failures
Study of the Fouling Characteristics of Arc Pipe Based on Principal Component Analysis and Partial Least Squares
Static Interval Optimization for Structures with Interval Parameters and Interval Loading
Analysis on Dynamic Characteristics of CNC Machine Tool and Experiment with Influence of Rolling Guide Joint Considered
Mechanical Analysis of Porous Concrete Base in Asphalt Pavement
Mechanical Analysis for Asphalt Surface in Transverse Contraction Joint of Porous Concrete Base
Aerodynamic and Heat Transfer Simulation of Cooling Turbine Blade with Different Tips
Analysis on Stress Characteristics of Rolling Body of Rolling Dryer
Automatic Control of Liquid Discharging after Hydraulic Fracture of Oil Well
The Resistance of Micro-Fabricated Hollow Wire at Giga-Hertz Range
Research on Dull Materials Control of Manufacturing Enterprises
Study on Concrete's Temperature Control Measures for Inverted-Siphons in Wenxian-Boai I Section
Study on Concrete's Temperature Control Measures for Inverted-Siphons during Construction Period
Simulation Studies on Structure-Force Dynamic Coupling of Electrorheological Fluids in a Poiseuille Flow Field
Modelling and Analysis on Detecting System for Bogie Wheelset Alignment Parameters in Horizontal Plane
Finite Element Analysis on Fracture Problem of Rubber - Metal Ring
Application of Optimized GM (1,1) in the Machine Tool Thermal Error Modeling
Equivalent Profile of High-Speed Mill Considering Gyroscopic Effect
Analytical Modeling of the Spindle Shaft of Heavy Load Deflection Angle Milling Head Dynamics Using Timoshenko Beam Model
Synthesis of 5-Benzoylacenaphthene in the Presence of [Bmim] Cl/AlCl3 Ionic Liquid
Experimental Investigation of Vibration and Noise Control of Reciprocating Compressors
Cam Grinding Interpolation Research Based on Cubic Non-Uniform Rational B-Splines
Mg(OH)2 Partially Substituted Alkaline Peroxide Mechanical Pulping of Poplar
Application Research of APDL on Contrarotating Propeller Parametric Modeling
Carbothermic Reduction and Chlorination of Alumina with Coal in Vacuum
The Research on the Electrical Properties Change in Extrusion Molding of Resin Matrix Multi-Walled Carbon Nano Tubes Composites
Online Weld Quality Benchmarking and Assurance during the Mass-Production Resistance Spot Welding Process
Applying Life Cycle Six Sigma in Tolerance Design Methodology
Design of Small and Medium Power Smart Frequency Conversion Electric Actuator
Study on Effects of High-Altitude Electromagnetic Pulse to Engine Electronic Control System
Study on Superposed Magnetic Field ECM of Square Hole
Features and Industrial Applications of Combined Directed Valve Tray
Research on Blockage Damage Effect of Fragment Warhead to Target on Ground
Synthesis of 1-Acetylpyrene via Friedel-Crafts Reaction Using Chloroaluminate Ionic Liquids as Dual Catalyst and Solvent
Computer-Aided Material Classification Coding Model and Software System for Mechanical Product
Machine Performance Degradation Recognition Using Locality Preserving Projections and Clustering Approach
Design of Bionic Flapping-Wing Propulsion Device
Robust Control of Double-Machine Wind Turbines with DFIG Using Hamiltonian Energy Method
Research on the Proper Use of Chassis Cetralized Stuffing Lubrication System
Additional Mechanical Torque Coefficients of Hydro Turbine and Governor System
Limit Analysis of Supporting Pressure for Failure Surface of Deep-Buried Tunnel with Nonlinear Failure Criterion
Research on Analysis and Repairing for Metal Structure Cracks of Portal Crane
The Design of Automatic Control System for Large-Scale Aluminum Ring Rolling Mill
Study on Dynamic Characteristic of Bipolar Decoupling Micro-Machined Gyroscope
Laser Diagnostic Investigation on the Spray and Combustion with Butanol-Biodiesel-Diesel Fuel Blends
Analysis of Micro-Explosion Phenomenon in a Constant Volume Chamber by Butanol-Biodiesel-Diesel Blend Fuel
The Performance Simulation and Optimization Research on Intake Port of Locomotive Diesel Engine
The Thermo-Test and Mathematics Model Study on Automobile Tube-Core-Fin Radiator
The Mutual Impedance Analysis of a Broadband Dense Plane Array
Effect of Different Ignition Methods on Combustion Characteristics of a Turbocharging Lean Burn LPG Engine
Research on LPG Dual-Spark Ignition Engine Combustion by CFD
The Trend Estimate of the Wind Turbine Based on the Wavelet Neural Network
Study on the Influence of the Temperature Rise and Frictional Coefficient of Brake Shoe on Braking of Wind Turbine
Magnetic Bearing and its New Applications
Technology of Magnetic Flywheel Energy Storage
Research on Reliability of Offshore Wind Turbine
Study on the Influence of Skewed Pole on Cogging Torque of PMSM
Optimization Study on Open Shaped Ribs Arrangement and Diaphragm Cutout for Steel Orthotropic Box Girder
The Mechanical Improve Design and Simulation Analysis of Loom's Let-Off System
Catalytic Pyrolysis of Shenhua Coal to Prepare Fuel Gases Using Metallic Oxide Supported Catalysts
Study on Traditional Textile Machinery in Southeast of Shanxi Province
Simulation Analysis on Sucking Process Outflow Phenomenon in Piezoelectric Pump