An Introduction to Geotechnical Engineering
2nd Edition
Published on 4. January 2011
Book
Hardback
816 pages
978-0-13-031721-6 (ISBN)
Description
An Introduction to Geotechnical Engineering, 2/e is a descriptive, elementary introduction to geotechnical engineering - with applications to civil engineering practice.
Reviews / Votes
"The authors do a nice job in presenting significant discussion in theory and background information. I prefer this approach to the more mechanical cookbook approach in which equations and methods are emphasized over theory. If the students are committed and dedicated to reading the text, they will find a wealth of useful information that compliments classroom lectures, and homework problems."-Robert Mokwa, MONTANA STATE UNIVERSITY
"The text provides information that goes beyond a typical undergraduate soil mechanics course. In fact I tell my students that `this is a text that you can retain for future use and reference, whether you choose to go to graduate school or engineering practice.' Plus, it's written with a good sense of humor."
-Khaled Sobhan, FLORIDA ATLANTIC UNIVERSITY
"Writing is excellent, engaging, and helpful. It anticipates well the questions forming in the average student's mind."
-Trevor Smith, PORTLAND STATE UNIVERSITY
More details
Edition
2nd edition
Language
English
Place of publication
United States
Publishing group
Pearson Education (US)
Target group
College/higher education
Dimensions
Height: 241 mm
Width: 191 mm
Weight
998 gr
ISBN-13
978-0-13-031721-6 (9780130317216)
Copyright in bibliographic data is held by Nielsen Book Services Limited or its licensors: all rights reserved.
Schweitzer Classification
Content
Chapter 1 Introduction to Geotechnical Engineering
1.1 Geotechnical Engineering
1.2 The Unique Nature of Soil and Rock Materials
1.3 Scope of This Book
1.4 Historical Development of Geotechnical Engineering
1.5 Suggested Approach to the Study of Geotechnical Engineering
1.6 Notes on Symbols and Units
1.7 Some Comments on How to Study in General
Problems
Chapter 2 Index and Classification Properties of Soils
2.1 Introduction
2.2 Basic Definitions and Phase Relations for Soils
2.3 Solution of Phase Problems
2.3.1 Submerged or Buoyant Density
2.3.2 Unit Weight and Specific Gravity
2.4 Soil Texture
2.5 Grain Size and Grain Size Distribution
2.6 Particle Shape
2.7 Atterberg Limits
2.7.1 Cone Liquid Limit
2.7.2 One Point Liquid Limit Test
2.7.3 Additional Comments on the Atterberg Limits
2.8 Introduction To Soil Classification
2.9 Unified Soil Classification System (USCS)
2.9.1 Visual-Manual Classification of Soils
2.9.2 What Else Can We Get From The LI-PI Chart?
2.9.3 Limitations of the USCS
2.10 AASHTO Soil Classification System
Problems
Chapter 3 Geology, Landforms, and the Origin of Geo-Materials
3.1 Importance of Geology to Geotechnical Engineering
3.1.1 Geology
3.1.2 Geomorphology
3.1.3 Engineering Geology
3.2 The Earth, Minerals, Rocks, and Rock Structure
3.2.1 The Earth
3.2.2 Minerals
3.2.3. Rocks
3.2.4. Rock Structure
3.3 Geologic Processes and Landforms
3.3.1 Geologic Processes and the Origin of Earthen Materials
3.3.2 Weathering
3.3.3. Gravity Processes
3.3.4. Surface Water Processes
3.3.5 Ice Processes and Glaciation
3.3.6 Wind Processes
3.3.7 Volcanic Processes
3.3.8 Groundwater Processes
3.3.9 Tectonic Processes
3.3.10 Plutonic Processes
3.4 Sources of Geologic Information Problems
Chapter 4 Clay Minerals, Soil and Rock Structures, and Rock Classification
4.1Introduction
4.2 Products of Weathering
4.3 Clay Minerals
4.3.1 The 1:1 Clay Minerals
4.3.2 The 2:1 Clay Minerals
4.3.3 Other Clay Minerals
4.4 Identification of Clay Minerals And Activity
4.5 Specific Surface
4.6 Interaction between Water and Clay Minerals
4.6.1 Hydration of Clay Minerals and the Diffuse Double Layer
4.6.2 Exchangeable Cations and Cation Exchange Capacity (CEC)
4.7 Interaction of Clay Particles
4.8 Soil Structure and Fabric of Fine Grained Soils
4.8.1 Fabrics of Fine Grained Soils
4.8.2 Importance of Microfabric and Macrofabric; Description Criteria
4.9 Granular Soil Fabrics
4.10 Soil Profiles, Soil Horizons, and Soil Taxonomy
4.11 Special Soil Deposits
4.11.1 Organic soils, peats, and muskeg
4.11.2 Marine Soils
4.11.3 Waste Materials and Contaminated Sites
4.12 Transitional Materials: Hard Soils vs. Soft Rocks
4.13 Properties, Macrostructure, and Classification of Rock Masses
4.13.1 Properties of Rock Masses
4.13.2 Discontinuities in Rock
4.13.3 Rock Mass Classification Systems
Problems
Chapter 5 Compaction and Stabilization of Soils
5.1 Introduction
5.2 Compaction and Densification
5.3 Theory of Compaction for Fine-Grained Soils
5.3.1 Process of Compaction
5.3.2 Typical Values; Degree of Saturation
5.3.3 Effect of Soil Type and Method of Compaction
5.4 Structure of Compacted Fine-Grained Soils
5.5 Compaction of Granular Soils
5.5.1 Relative or Index Density
5.5.2 Densification of Granular Deposits.
5.5.3 Rock Fills
5.6 Field Compaction Equipment and Procedures
5.6.1 Compaction of Fine-Grained Soils
5.6.2 Compaction of Granular Materials
5.6.3 Compaction Equipment Summary
5.6.4 Compaction of Rockfill
5.7 Specifications and Compaction Control
5.7.1 Specifications
5.7.2 Compaction Control Tests
5.7.3 Problems with Compaction Control Tests
5.7.4 Most Efficient Compaction
5.7.5Overcompaction
5.7.6 Rockfill QA/QC
5.7.7 Compaction in Trenches
5.8 Estimating Performance of Compacted Soils
Problems
Chapter 6 Hydrostatic Water in Soils and Rocks
6.1 Introduction
6.2 Capillarity
6.2.1 Capillary Rise and Capillary Pressures in Soils
6.2.2 Measurement of Capillarity; Soil-Water Characteristic Curve
6.2.3 Other Capillary Phenomena
6.3 Groundwater Table and the Vadose Zone 6.3.1 Definition
6.3.2 Field Determination
6.4 Shrinkage Phenomena in Soils
6.4.1 Capillary Tube Analogy
6.4.2 Shrinkage Limit Test
6.4.3 Shrinkage Properties of Compacted Clays
6.5 Expansive Soils and Rocks
6.5.1 Physical-Chemical Aspects
6.5.2 Identification and Prediction 6.5.3 Expansive Properties of Compacted Clays
6.5.4 Swelling Rocks
6.6 Engineering Significance of Shrinkage and Swelling
6.7 Collapsible Soils and Subsidence
6.8 Frost Action
6.8.1 Terminology, Conditions, and Mechanisms of Frost Action
6.8.2 Prediction and Identification of Frost Susceptible Soils
6.8.3 Engineering Significance of Frozen Ground
6.9 Intergranular or Effective Stress
6.10 Vertical Stress Profiles
6.11 Relationship between Horizontal and Vertical Stresses
Problems
Chapter 7 Fluid Flow in Soils and Rock
7.1 Introduction
7.2 Fundamentals of Fluid Flow
7.3 Darcy's Law for Flow through Porous Media
7.4 Measurement of Permeability or Hydraulic Conductivity
7.4.1 Laboratory and Field Hydraulic Conductivity Tests
7.4.2 Factors Affecting Laboratory and Field Determination of K
7.4.3 Empirical Relationships and Typical Values of K
7.5 Heads and One-Dimensional Flow
7.6 Seepage Forces, Quicksand, and Liquefaction
7.6.1 Seepage Forces, Critical Gradient, and Quicksand
7.6.2 Quicksand Tank
7.6.3 Liquefaction
7.7 Seepage and Flow Nets: Two-Dimensional Flow
7.7.1 Flow Nets
7.7.2 Quantity of Flow, Uplift Pressures, and Exit Gradients
7.7.3 Other Solutions to Seepage Problems
7.7.4 Anisotropic and Layered Flow
7.8 Seepage towards Wells
7.9 Seepage through Dams and Embankments
7.10 Control of Seepage and Filters
7.10.1 Basic Filtration Principles
7.10.2 Design of Graded Granular Filters
7.10.3 Geotextile Filter Design Concepts
7.10.4 FHWA Filter Design Procedure
Problems
Chapter 8 Compressibility of Soil and Rock
8.1 Introduction
8.2 Components of Settlement
8.3 Compressibility of Soils
8.4 One-Dimensional Consolidation Testing
8.5 Preconsolidation Pressure and Stress History
8.5.1 Normal Consolidation, Overconsolidation, and Preconsolidation Pressure
8.5.2 Determining the Preconsolidation Pressure
8.5.3 Stress History and Preconsolidation Pressure
8.6 Consolidation Behavior of Natural and Compacted Soils
8.7 Settlement Calculations
8.7.1 Consolidation Settlement of Normally Consolidated Soils
8.7.2 Consolidation Settlement of Overconsolidated Soils
8.7.3 Determining Cr and Cre
8.8 Tangent Modulus Method
8.9 Factors Affecting the Determination of scP
8.10 Prediction of Field Consolidation Curves
8.11 Soil Profiles
8.12 Approximate Methods and Typical Values of Compression Indices
8.13 Compressibility of Rock and Transitional Materials
8.14 In Situ Determination f Compressibility
Problems
Chapter 9 Time Rate of Consolidation
9.1 Introduction
9.2 The Consolidation Process
9.3 Terzaghi's One-Dimensional Consolidation Theory
9.3.1 Classic Solution for the Terzaghi Consolidation Equation
9.3.2 Finite Difference Solution for the Terzaghi Consolidation Equation
9.4 Determination of the Coefficient of Consolidation Cv
9.4.1 Casagrande's Logarithm of Time Fitting Method
9.4.2 Taylor's Square Root of Time Fitting Method
9.5 Determination of the Coefficient Of Permeability
9.6 Typical Values of the Coefficient Of Consolidation, Cv
9.7 In Situ Determination of Consolidation Properties
9.8 Evaluation of Secondary Settlement
Problems
Chapter 10 Stress Distribution and Settlement Analysis
10.1 Introduction
10.2 Settlement Analysis of Shallow Foundations
10.2.1 Components of Settlement
10.2.2 Steps in Settlement Analysis
10.3 Stress Distribution
10.4 Immediate Settlement
10.5 Vertical Effective Overburden and Preconsolidation Stress Profiles
10.6 Settlement Analysis Examples
Problems
Chapter 11 The Mohr Circle, Failure Theories, and Strength Testing of Soil And Rocks
11.1 Introduction
11.2 Stress at a Point
11.3 Stress-Strain Relationships and Failure Criteria
11.4 The Mohr-Coulomb Failure Criterion
11.4.1 Mohr Failure Theory
11.4.2 Mohr-Coulomb Failure Criterion
11.4.3 Obliquity Relations
11.4.4 Failure Criteria for Rock
11.5 Laboratory Tests for the Shear Strength of Soils and Rocks
11.5.1 Direct Shear Test
11.5.2 Triaxial Test
11.5.3 Special Laboratory Soils Tests
11.5.4 Laboratory Tests for Rock Strength
11.6 In Situ Tests for the Shear Strength of Soils and Rocks
11.6.1 Insitu Tests for Shear Strength of Soils
11.6.2 Field Tests for Modulus and Strength of Rocks
Problems
Chapter 12 An Introduction to Shear Strength of Soils and Rock
12.1 Introduction
12.2 Angle of Repose of Sands
12.3 Behavior of Saturated Sands during Drained Shear
12.4 Effect of Void Ratio and Confining Pressure on Volume Change
12.5 Factors that Affect the Shear Strength of Sands
12.6 Shear Strength of Sands Using In Situ Tests
12.6.1 SPT
12.6.2 CPT
12.6.3 DMT
12.7 The Coefficient of Earth Pressure at Rest for Sands
12.8 Behavior of Saturated Cohesive Soils during Shear
12.9 Consolidated-Drained Stress-Deformation and Strength Characteristics
12.9.1 Consolidated-Drained (CD) Test Behavior
12.9.2 Typical Values of Drained Strength Parameters for Saturated
12.9.3 Use of CD Strength in Engineering Practice
12.10 Consolidated-Undrained Stress-Deformation and Strength Characteristics
12.10.1 Consolidated-Undrained (CU) Test Behavior
12.10.2 Typical Value of the Undrained Strength Parameters
12.10.3 Use of CU Strength In Engineering Practice
12.11 Unconsolidated-Undrained Stress-Deformation and Strength Characteristics 12.11.1 Unconsolidated-Undrained (UU) Test Behavior
12.11.2 Unconfined Compression Test
12.11.3 Typical Values of UU and UCC Strengths
12.11.4 Other Ways to Determine the Undrained Shear Strength
12.11.5 Use of UU Strength in Engineering Practice
12.12 Sensitivity
12.13 The Coefficient of Earth Pressure at Rest for Clays
12.14 Strength of Compacted Clays
12.15 Strength of Rocks and Transitional Materials
12.16 Multistage Testing
12.17 Introduction to Pore Pressure Parameters
Problems
Chapter 13 Advanced Topics in Shear Strength of Soils and Rocks
13.1 Introduction
13.2 Stress Paths
13.3 Pore Pressure Parameters for Different Stress Paths
13.4 Stress Paths during Undrained Loading - Normally and Lightly Overconsolidated Clays
13.5 Stress Paths during Undrained Loading - Heavily Overconsolidated Clays
13.6 Applications of Stress Paths to Engineering Practice
13.7 Critical State Soil Mechanics
13.8 Modulus and Constitutive Models for Soils
13.8.1 Modulus of Soils
13.8.2 Constitutive Relations
13.8.3 Soil Constitutive Modeling 13.8.4 Failure Criteria for Soils
13.8.5 Classes of Constitutive Models for Soils
13.8.6 The Hyperbolic (Duncan-Chang) Model
13.9 Fundamental Basis of the Drained Strength of Sands 13.9.1 Basics of Frictional Shear Strength
13.9.2 Stress-Dilatancy and Energy Corrections
13.9.3 Curvature of the Mohr Failure Envelope
13.10 Behavior of Saturated Sands in Undrained Shear 13.10.1 Consolidated-Undrained Behavior
13.10.2 Using CD Tests to Predict CU Results
13.10.3 Unconsolidated-Undrained Behavior
13.10.4 Strain Rate Effects in Sands
13.11Plane Strain Behavior of Sands
13.12 Residual Strength of Soils
13.12.1 Drained Residual Shear Strength of Clays
13.12.2 Residual Shear Strength of Sands
13.13 Stress-Deformation and Shear Strength of Clays: Special Topics 13.13.1 Definition of Failure in CU Effective Stress Tests
13.13.2 Hvorslev Strength Parameters
13.13.3 The tF/scVo Ratio, Stress History, and Juergenson-Rutledge Hypothesis
13.13.4 Consolidation Methods to Overcome Sample Disturbance
13.13.5 Anisotropy
13.13.6 Plane Strain Strength of Clays
13.13.7 Strain Rate Effects
13.14 Strength of Unsaturated Soils 13.14.1Matric Suction in Unsaturated Soils
13.14.2 The Soil-Water Characteristic Curve
13.14.3 The Mohr-Coulomb Failure Envelope for Unsaturated Soils
13.14.4 Shear Strength Measurement in Unsaturated Soils
13.15 Properties of Soils under Dynamic Loading
13.15.1 Stress-Strain Response of Cyclically Loaded Soils
13.15.2 Measurement of Dynamic Soil Properties
13.15.3 Empirical Estimates of Gmax, Modulus Reduction, and Damping
13.15.4 Strength of Dynamically Loaded Soils
13.16 Failure Theories for Rock Problems
1.1 Geotechnical Engineering
1.2 The Unique Nature of Soil and Rock Materials
1.3 Scope of This Book
1.4 Historical Development of Geotechnical Engineering
1.5 Suggested Approach to the Study of Geotechnical Engineering
1.6 Notes on Symbols and Units
1.7 Some Comments on How to Study in General
Problems
Chapter 2 Index and Classification Properties of Soils
2.1 Introduction
2.2 Basic Definitions and Phase Relations for Soils
2.3 Solution of Phase Problems
2.3.1 Submerged or Buoyant Density
2.3.2 Unit Weight and Specific Gravity
2.4 Soil Texture
2.5 Grain Size and Grain Size Distribution
2.6 Particle Shape
2.7 Atterberg Limits
2.7.1 Cone Liquid Limit
2.7.2 One Point Liquid Limit Test
2.7.3 Additional Comments on the Atterberg Limits
2.8 Introduction To Soil Classification
2.9 Unified Soil Classification System (USCS)
2.9.1 Visual-Manual Classification of Soils
2.9.2 What Else Can We Get From The LI-PI Chart?
2.9.3 Limitations of the USCS
2.10 AASHTO Soil Classification System
Problems
Chapter 3 Geology, Landforms, and the Origin of Geo-Materials
3.1 Importance of Geology to Geotechnical Engineering
3.1.1 Geology
3.1.2 Geomorphology
3.1.3 Engineering Geology
3.2 The Earth, Minerals, Rocks, and Rock Structure
3.2.1 The Earth
3.2.2 Minerals
3.2.3. Rocks
3.2.4. Rock Structure
3.3 Geologic Processes and Landforms
3.3.1 Geologic Processes and the Origin of Earthen Materials
3.3.2 Weathering
3.3.3. Gravity Processes
3.3.4. Surface Water Processes
3.3.5 Ice Processes and Glaciation
3.3.6 Wind Processes
3.3.7 Volcanic Processes
3.3.8 Groundwater Processes
3.3.9 Tectonic Processes
3.3.10 Plutonic Processes
3.4 Sources of Geologic Information Problems
Chapter 4 Clay Minerals, Soil and Rock Structures, and Rock Classification
4.1Introduction
4.2 Products of Weathering
4.3 Clay Minerals
4.3.1 The 1:1 Clay Minerals
4.3.2 The 2:1 Clay Minerals
4.3.3 Other Clay Minerals
4.4 Identification of Clay Minerals And Activity
4.5 Specific Surface
4.6 Interaction between Water and Clay Minerals
4.6.1 Hydration of Clay Minerals and the Diffuse Double Layer
4.6.2 Exchangeable Cations and Cation Exchange Capacity (CEC)
4.7 Interaction of Clay Particles
4.8 Soil Structure and Fabric of Fine Grained Soils
4.8.1 Fabrics of Fine Grained Soils
4.8.2 Importance of Microfabric and Macrofabric; Description Criteria
4.9 Granular Soil Fabrics
4.10 Soil Profiles, Soil Horizons, and Soil Taxonomy
4.11 Special Soil Deposits
4.11.1 Organic soils, peats, and muskeg
4.11.2 Marine Soils
4.11.3 Waste Materials and Contaminated Sites
4.12 Transitional Materials: Hard Soils vs. Soft Rocks
4.13 Properties, Macrostructure, and Classification of Rock Masses
4.13.1 Properties of Rock Masses
4.13.2 Discontinuities in Rock
4.13.3 Rock Mass Classification Systems
Problems
Chapter 5 Compaction and Stabilization of Soils
5.1 Introduction
5.2 Compaction and Densification
5.3 Theory of Compaction for Fine-Grained Soils
5.3.1 Process of Compaction
5.3.2 Typical Values; Degree of Saturation
5.3.3 Effect of Soil Type and Method of Compaction
5.4 Structure of Compacted Fine-Grained Soils
5.5 Compaction of Granular Soils
5.5.1 Relative or Index Density
5.5.2 Densification of Granular Deposits.
5.5.3 Rock Fills
5.6 Field Compaction Equipment and Procedures
5.6.1 Compaction of Fine-Grained Soils
5.6.2 Compaction of Granular Materials
5.6.3 Compaction Equipment Summary
5.6.4 Compaction of Rockfill
5.7 Specifications and Compaction Control
5.7.1 Specifications
5.7.2 Compaction Control Tests
5.7.3 Problems with Compaction Control Tests
5.7.4 Most Efficient Compaction
5.7.5Overcompaction
5.7.6 Rockfill QA/QC
5.7.7 Compaction in Trenches
5.8 Estimating Performance of Compacted Soils
Problems
Chapter 6 Hydrostatic Water in Soils and Rocks
6.1 Introduction
6.2 Capillarity
6.2.1 Capillary Rise and Capillary Pressures in Soils
6.2.2 Measurement of Capillarity; Soil-Water Characteristic Curve
6.2.3 Other Capillary Phenomena
6.3 Groundwater Table and the Vadose Zone 6.3.1 Definition
6.3.2 Field Determination
6.4 Shrinkage Phenomena in Soils
6.4.1 Capillary Tube Analogy
6.4.2 Shrinkage Limit Test
6.4.3 Shrinkage Properties of Compacted Clays
6.5 Expansive Soils and Rocks
6.5.1 Physical-Chemical Aspects
6.5.2 Identification and Prediction 6.5.3 Expansive Properties of Compacted Clays
6.5.4 Swelling Rocks
6.6 Engineering Significance of Shrinkage and Swelling
6.7 Collapsible Soils and Subsidence
6.8 Frost Action
6.8.1 Terminology, Conditions, and Mechanisms of Frost Action
6.8.2 Prediction and Identification of Frost Susceptible Soils
6.8.3 Engineering Significance of Frozen Ground
6.9 Intergranular or Effective Stress
6.10 Vertical Stress Profiles
6.11 Relationship between Horizontal and Vertical Stresses
Problems
Chapter 7 Fluid Flow in Soils and Rock
7.1 Introduction
7.2 Fundamentals of Fluid Flow
7.3 Darcy's Law for Flow through Porous Media
7.4 Measurement of Permeability or Hydraulic Conductivity
7.4.1 Laboratory and Field Hydraulic Conductivity Tests
7.4.2 Factors Affecting Laboratory and Field Determination of K
7.4.3 Empirical Relationships and Typical Values of K
7.5 Heads and One-Dimensional Flow
7.6 Seepage Forces, Quicksand, and Liquefaction
7.6.1 Seepage Forces, Critical Gradient, and Quicksand
7.6.2 Quicksand Tank
7.6.3 Liquefaction
7.7 Seepage and Flow Nets: Two-Dimensional Flow
7.7.1 Flow Nets
7.7.2 Quantity of Flow, Uplift Pressures, and Exit Gradients
7.7.3 Other Solutions to Seepage Problems
7.7.4 Anisotropic and Layered Flow
7.8 Seepage towards Wells
7.9 Seepage through Dams and Embankments
7.10 Control of Seepage and Filters
7.10.1 Basic Filtration Principles
7.10.2 Design of Graded Granular Filters
7.10.3 Geotextile Filter Design Concepts
7.10.4 FHWA Filter Design Procedure
Problems
Chapter 8 Compressibility of Soil and Rock
8.1 Introduction
8.2 Components of Settlement
8.3 Compressibility of Soils
8.4 One-Dimensional Consolidation Testing
8.5 Preconsolidation Pressure and Stress History
8.5.1 Normal Consolidation, Overconsolidation, and Preconsolidation Pressure
8.5.2 Determining the Preconsolidation Pressure
8.5.3 Stress History and Preconsolidation Pressure
8.6 Consolidation Behavior of Natural and Compacted Soils
8.7 Settlement Calculations
8.7.1 Consolidation Settlement of Normally Consolidated Soils
8.7.2 Consolidation Settlement of Overconsolidated Soils
8.7.3 Determining Cr and Cre
8.8 Tangent Modulus Method
8.9 Factors Affecting the Determination of scP
8.10 Prediction of Field Consolidation Curves
8.11 Soil Profiles
8.12 Approximate Methods and Typical Values of Compression Indices
8.13 Compressibility of Rock and Transitional Materials
8.14 In Situ Determination f Compressibility
Problems
Chapter 9 Time Rate of Consolidation
9.1 Introduction
9.2 The Consolidation Process
9.3 Terzaghi's One-Dimensional Consolidation Theory
9.3.1 Classic Solution for the Terzaghi Consolidation Equation
9.3.2 Finite Difference Solution for the Terzaghi Consolidation Equation
9.4 Determination of the Coefficient of Consolidation Cv
9.4.1 Casagrande's Logarithm of Time Fitting Method
9.4.2 Taylor's Square Root of Time Fitting Method
9.5 Determination of the Coefficient Of Permeability
9.6 Typical Values of the Coefficient Of Consolidation, Cv
9.7 In Situ Determination of Consolidation Properties
9.8 Evaluation of Secondary Settlement
Problems
Chapter 10 Stress Distribution and Settlement Analysis
10.1 Introduction
10.2 Settlement Analysis of Shallow Foundations
10.2.1 Components of Settlement
10.2.2 Steps in Settlement Analysis
10.3 Stress Distribution
10.4 Immediate Settlement
10.5 Vertical Effective Overburden and Preconsolidation Stress Profiles
10.6 Settlement Analysis Examples
Problems
Chapter 11 The Mohr Circle, Failure Theories, and Strength Testing of Soil And Rocks
11.1 Introduction
11.2 Stress at a Point
11.3 Stress-Strain Relationships and Failure Criteria
11.4 The Mohr-Coulomb Failure Criterion
11.4.1 Mohr Failure Theory
11.4.2 Mohr-Coulomb Failure Criterion
11.4.3 Obliquity Relations
11.4.4 Failure Criteria for Rock
11.5 Laboratory Tests for the Shear Strength of Soils and Rocks
11.5.1 Direct Shear Test
11.5.2 Triaxial Test
11.5.3 Special Laboratory Soils Tests
11.5.4 Laboratory Tests for Rock Strength
11.6 In Situ Tests for the Shear Strength of Soils and Rocks
11.6.1 Insitu Tests for Shear Strength of Soils
11.6.2 Field Tests for Modulus and Strength of Rocks
Problems
Chapter 12 An Introduction to Shear Strength of Soils and Rock
12.1 Introduction
12.2 Angle of Repose of Sands
12.3 Behavior of Saturated Sands during Drained Shear
12.4 Effect of Void Ratio and Confining Pressure on Volume Change
12.5 Factors that Affect the Shear Strength of Sands
12.6 Shear Strength of Sands Using In Situ Tests
12.6.1 SPT
12.6.2 CPT
12.6.3 DMT
12.7 The Coefficient of Earth Pressure at Rest for Sands
12.8 Behavior of Saturated Cohesive Soils during Shear
12.9 Consolidated-Drained Stress-Deformation and Strength Characteristics
12.9.1 Consolidated-Drained (CD) Test Behavior
12.9.2 Typical Values of Drained Strength Parameters for Saturated
12.9.3 Use of CD Strength in Engineering Practice
12.10 Consolidated-Undrained Stress-Deformation and Strength Characteristics
12.10.1 Consolidated-Undrained (CU) Test Behavior
12.10.2 Typical Value of the Undrained Strength Parameters
12.10.3 Use of CU Strength In Engineering Practice
12.11 Unconsolidated-Undrained Stress-Deformation and Strength Characteristics 12.11.1 Unconsolidated-Undrained (UU) Test Behavior
12.11.2 Unconfined Compression Test
12.11.3 Typical Values of UU and UCC Strengths
12.11.4 Other Ways to Determine the Undrained Shear Strength
12.11.5 Use of UU Strength in Engineering Practice
12.12 Sensitivity
12.13 The Coefficient of Earth Pressure at Rest for Clays
12.14 Strength of Compacted Clays
12.15 Strength of Rocks and Transitional Materials
12.16 Multistage Testing
12.17 Introduction to Pore Pressure Parameters
Problems
Chapter 13 Advanced Topics in Shear Strength of Soils and Rocks
13.1 Introduction
13.2 Stress Paths
13.3 Pore Pressure Parameters for Different Stress Paths
13.4 Stress Paths during Undrained Loading - Normally and Lightly Overconsolidated Clays
13.5 Stress Paths during Undrained Loading - Heavily Overconsolidated Clays
13.6 Applications of Stress Paths to Engineering Practice
13.7 Critical State Soil Mechanics
13.8 Modulus and Constitutive Models for Soils
13.8.1 Modulus of Soils
13.8.2 Constitutive Relations
13.8.3 Soil Constitutive Modeling 13.8.4 Failure Criteria for Soils
13.8.5 Classes of Constitutive Models for Soils
13.8.6 The Hyperbolic (Duncan-Chang) Model
13.9 Fundamental Basis of the Drained Strength of Sands 13.9.1 Basics of Frictional Shear Strength
13.9.2 Stress-Dilatancy and Energy Corrections
13.9.3 Curvature of the Mohr Failure Envelope
13.10 Behavior of Saturated Sands in Undrained Shear 13.10.1 Consolidated-Undrained Behavior
13.10.2 Using CD Tests to Predict CU Results
13.10.3 Unconsolidated-Undrained Behavior
13.10.4 Strain Rate Effects in Sands
13.11Plane Strain Behavior of Sands
13.12 Residual Strength of Soils
13.12.1 Drained Residual Shear Strength of Clays
13.12.2 Residual Shear Strength of Sands
13.13 Stress-Deformation and Shear Strength of Clays: Special Topics 13.13.1 Definition of Failure in CU Effective Stress Tests
13.13.2 Hvorslev Strength Parameters
13.13.3 The tF/scVo Ratio, Stress History, and Juergenson-Rutledge Hypothesis
13.13.4 Consolidation Methods to Overcome Sample Disturbance
13.13.5 Anisotropy
13.13.6 Plane Strain Strength of Clays
13.13.7 Strain Rate Effects
13.14 Strength of Unsaturated Soils 13.14.1Matric Suction in Unsaturated Soils
13.14.2 The Soil-Water Characteristic Curve
13.14.3 The Mohr-Coulomb Failure Envelope for Unsaturated Soils
13.14.4 Shear Strength Measurement in Unsaturated Soils
13.15 Properties of Soils under Dynamic Loading
13.15.1 Stress-Strain Response of Cyclically Loaded Soils
13.15.2 Measurement of Dynamic Soil Properties
13.15.3 Empirical Estimates of Gmax, Modulus Reduction, and Damping
13.15.4 Strength of Dynamically Loaded Soils
13.16 Failure Theories for Rock Problems