21st Symposium on Composites

Preface, Scientific Committee
Chapter 1: Polymer Matrix Composites
Rigidity and Damage Evolution of Long Fibre Reinforced Polypropylene Made by Direct Processing Route (LFT-D)
Fiber/Matrix Adhesion in Glass Fiber Reinforced Inorganic-Organic Polyurea/Polysilicate Resins
Ultrasonic-Impregnation for Fiber-Reinforced Thermoplastic Prepreg Production
Use of Recycled Waste Paper as Fiber Reinforcement for Polypropylene - Examination of Mechanical Properties in Comparison to NFRP
Processing of Carbon Nanotubes and Carbon Nanofibers towards High Performance Carbon Fiber Reinforced Polymers
Influence of the Manufacturing Process (Comparison MuCell and Direct-LFT) of Foamed and Fiber Reinforced Polymer Sandwich Structures on the Fiber Length
Formulation and Manufacturing of Polybenzoxazine Composites
Influence of the Chemical Functionalisation of Glass Fibre Surfaces on the Mechanical Properties of Continuous Fibre Reinforced Thermoplastics
Development of Thermoplastic Composites for Visible Parts in Automotive
Surface Pretreatment of Fiber-Reinforced Plastics via VUV Radiation
Toughening of Glass Fiber Reinforced Unsaturated Polyester Composites by Core-Shell Particles
Tailored Inserts Based on Continuous Fibre for Local Bearing Reinforcement of Short Fibre Thermoplastic Components
Quality Controlled UD Tape Production for the Individualised Production of Load Optimised Thermoplastic Composite Parts
Chapter 2: Metal Matrix Composites
Adaptation of TiC Hard Particles Properties and Morphology in Metal Matrix Composites by Refractory Elements
Manufacturing of Hard Composite Materials on Fe-Base with Oxide Particles
High Strain Rate Compression Testing of Hot-Pressed TRIP/TWIP-Matrix-Composites
Ti/B4C Composites Prepared by In Situ Reaction Using Inductive Hot Pressing
Preparation of Titanium Metal Matrix Composites Using Additive Manufacturing
Composite Peening - A Novel Processing Technology for Graded Reinforced Aluminium Matrix Composites
Mechanical Properties of Aluminum-Matrix-Nanoparticle-Composites
Silver/Diamond Composite Material - Powder Metallurgical Route and Thermo-Physical Properties
Continuous Powder Extrusion for Fabrication of Carbon Fibre Reinforced Aluminium
Development and Characterization of Mg-SiC Nanocomposite Powders Synthesized by Mechanical Milling
Influence of Ti and Zn on Particle Incorporation of AlB2, B and B4C Particles in Aluminum Using the Stir Casting Process
Mechanical Properties of AlSi12-Based Metal Matrix Composites with Layered Metallic Glass Ribbons
Development of a TiCp Reinforced Ni-Based Superalloy MMC, with High Creep Resistance and Reduced Weight
Intrinsic Aluminum CFRP Hybrid Composites Produced in High Pressure Die Casting with Polymer Based Decoupling Layer
The Development of Lead-Free Sliding Contacts Based on Bronze-Graphite Composites through Powder Injection Moulding
Chapter 3: Ceramic Matrix Composites
Characterization and Simulation of Bending Properties of Continuous Fiber Reinforced C/C-SiC Sandwich Structures
Manufacturing and Properties of Tungsten Carbide-Oxide Composites
Process Development for the Ceramic Injection Molding of Oxide Chopped Fiber Reinforced Aluminum Oxide
How to Tame the Aggressiveness of Liquid Silicon in the LSI Process
Influence of Hardener Content and Curing Parameters on the Microstructure and Mechanical Properties of Porous C/C Composites
Chapter 4: Bio-Composites
Natural Fibre Reinforced Bioplastics - Innovative Semi-Finished Products for Series Production
High-Performance Natural Fiber Composites Made from Technical Flax Textiles and Manufactured by Resin Transfer Molding
High Performance Green Composites for Green Technologies
Development of Bio-Based Self-Reinforced PLA Composites
Chapter 5: Laminates, Cellular Materials, Hybrid Structures and Joints
Optimization of Corrosive Properties of Carbon Fiber Reinforced Aluminum Laminates due to Integration of an Elastomer Interlayer
CATPUAL - An Innovative and High-Performance Hybrid Laminate with Carbon Fibre-Reinforced Thermoplastic Polyurethane
Material Selection and Process Configuration for Free-Form, Voluminous and Textile-Based Multi-Material-Design by the Example of a Bucket Seat
Micro-/Mesoporous Polymer-Derived Ceramic Structures Using Molecular Porogens
Material Selection for CFRP-Aluminium-Foam-Sandwiches Manufactured by a PUR Spraying Process
Determination of the Damping Characteristics of Fiber-Metal-Elastomer Laminates Using Piezo-Indicated-Loss-Factor Experiments
Damascus Steel Inlay on a Sword Blade - Production and Characterization
Improved Adhesion Strength of Metal Textile Composites by Surface Texturing Using TIG Arc or CW Laser Process
TFP Reinforced Metal - One Way to Increase the Specific Strength
Characterization of Hybrid Joining Techniques for FRP/Steel-Structures under Combined Mechanical and Thermal Loading
Influence of Laser Surface Treatment for Process-Integrated Joining of Textile Reinforced Thermoplastic Composites to Metal Sheets
Mechanical Behavior of Loops with Small Diameters
Injection Molded Aluminum-Polymer-Composites - Integral Lightweight Structures with Potential
Polyelectrolyte Treatment of Cellulose Fibers for the Manufacture of Novel Bio-Hybrid Fiber Composites (Bio-HFC) for Lightweight Applications
Ultrasonic Torsion Welding of Aging Resistant Al/CFRP Joints - Concepts, Mechanical and Microstructural Properties
Aspects of Preloaded Bolted Joints of Fiber Reinforced Polymers and Metals
Characterization of the Bonded Connection in Hybrid-Steel-GFRP-Laminates
Chapter 6: Surfaces and Coatings
Deposition of CVD Diamond Coatings on Carbon Fiber Composite Substrates
Yttria-Stabilized Zirconia Thin Films via MOCVD for Thermal Barrier and Protective Applications in Injection Molding
Entrapment of Hard Particles into Cr(VI)-Free Conversion Layers of Electrodeposited Zinc Coatings to Improve Corrosion Resistance
Anodic Oxidation of Carbon Fiber Surfaces: Influence of Static and Dynamic Process Conditions
Surface Characterization of Carbon Fibers by Atomic Force Microscopy: Roughness Quantification by Power Spectral Density
Wetting Behavior of Carbon Fibers: Influence of Surface Activation and Sizing Type
3rd Generation Hot-Dip Galvanized Steel Sheet for Automobile Manufacturing - Interface Reactions between Zinc and Metal Oxide
Chapter 7: Manufacturing Technologies
An Overview of Impregnation Methods for Carbon Fibre Reinforced Thermoplastics
Analysis of the Effects of Raster Orientation in Components Consisting of Short Glass Fibre Reinforced ABS of Different Fibre Volume Fraction Produced by Additive Manufacturing
In-Line Integration of Sensors in Thermoplastic Composite Structures Using Novel Continuous Orbital Winding Technology
Torque-Fiber-Winding (TFW)-Procedure: Manufacturing of Textile-Based Unidirectional Prepreg for Raw Material and Material Development of Carbon Fibre Reinforced Thermoplastics
One Step Production of Bicomponent Yarns with Glass Fibre Core and Thermoplastic Sheath for Composite Applications
Mechanical Properties of Co-Extruded Aluminium-Steel Compounds
Development of a High Pressure Die Casting Tool for Partial Integration of Glass Fiber Structures
HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding
Nozzle and Hot Runner Systems for Injection Moulding Machines for the Manufacturing of Moulded Thermoplastic Composite Parts with Skin-Core Structure (Sandwich Mouldings)
FE-Based Design of a Forging Tool System for a Hybrid Bevel Gear
Chapter 8: Technologies of Recycling and Renovation of Composites
Development of Nonwoven Preforms Made of Pure Recycled Carbon Fibres (rCF) for Applications of Composite Materials
Properties of Second Life Carbon Fibre Reinforced Polymers
Separation of Hybrid Structures for the Reclaim of their Single Components
Surface Modification of Recycled Carbon Fibers by Use of Plasma Treatment
A Holistic Approach to Use Multi-Scale Fractions of Dry Carbon Fibre Production Waste in Filled Bulk Moulding Compounds (BMC)
Application of Eco-Efficiency Analysis to Assess Three Different Recycling Technologies for Carbon Fiber Reinforced Plastics (CFRPs)
Recycled Carbon Fibers in Complex Structural Parts - Organic Sheets Made of rCF Staple Fiber Yarns
Chapter 9: Testing and Characterization, Quality Assurance
Non-Destructive Determination of Residual Stress Depth Profiles of Hybrid Components by Energy Dispersive Residual Stress Measurement
Ultrasonic Fatigue of CFRP - Experimental Principle, Damage Analysis and Very High Cycle Fatigue Properties
Mechanism-Oriented Characterization of the Fatigue Behavior of Glass Fiber-Reinforced Polyurethane Based on Hysteresis and Temperature Measurements
Research of the Load Bearing Capacity of Shape-Optimized Metal Inserts Embedded in CFRP under Different Types of Stresses
Acoustic Emission Analysis during Bending Tests of Continuous and Discontinuous Fiber Reinforced Polymers to Be Used in Hybrid Sheet Molding Compounds
Measurements of Mode I Interlaminar Properties of Carbon Fiber Reinforced Polymers Using Digital Image Correlation
Development of a New Method for Residual Stress Analysis on Fiber Reinforced Plastics with Use of Digital Image Correlation
Computed Tomography Experiments on a Laboratory Multipurpose Diffractometer
Chapter 10: Modeling, Numerical Investigation and Materials Selection in Design Process
Numerical Simulation of Low Velocity Impact on Pin-Reinforced Foam Core Sandwich Panel
Simulation of the Influence of Embedded Inserts on the RTM Filling Behavior Considering Local Fiber Structure
Fiber-Reinforced Plastics with Locally Adapted Stiffness for Bio-Inspired Hingeless, Deployable Architectural Systems
Numerical Investigations of Internal and Residual Stresses in Aluminium-Polymer Laminate Foils during Stretch Forming
An Integrated Virtual Tool Chain for the Simulation of the Manufacturing Process of a Composite Tidal Blade
Material Characterization for Constituents of Fiber Reinforced Polymers by Experiments and Prediction of Effective Composite Properties
Numerical Analysis on the Structural Behavior of a Non-Engaging CFRP Bellows Coupling for Propulsion Technology
FE Analysis of the Influence of Fiber Orientation to Shearing and Wrinkling of Fiber Reinforced Thermoplastic Parts
A Material Model for Prediction of Fatigue Damage and Degradation of CFRP Materials
An Approach for the Systematic Development of Progressive Light Weight Spring Element Concepts in Vehicle Constructions
Light Weight Vehicle in Natural Fibre Composite
Chapter 11: Structural Health Monitoring
Electro-Mechanical Impedance Measurements as a Possible SHM Method for Sandwich Debonding Detection
Highly Elastic Strain Gauges Based on Shape Memory Alloys for Monitoring of Fibre Reinforced Plastics
Sensor Integration in Castings Made of Aluminum - New Approaches for Direct Sensor Integration in Aluminum High Pressure Die Casting
Experimental Investigations on Integrated Conductor Paths in Fiber-Reinforced Thermoplastic Composite Structures
In-Process Monitoring of Joining Operations for Piezoceramic Elements
Polypropylene Based Piezo Ceramic Compounds for Micro Injection Molded Sensors