Special and High Performance Structural Materials

Preface
Chapter 1: Amorphous and High Entropy Alloys
Microstructure of Nb-Ta-V Based Hydrogen Permeation High Entropy Alloys
Analysis of Shear Banding in Zr-Based Metallic Glass under Laser Shock Peening and Bending
Fabrication and Characterization of Micro-Dent Produced by Laser Shock Peening on Zr-Based Bulk Metallic Glass
Damage Characteristics of Zr-Based Metallic Glasses under Helium Ions Irradiation
Effect of DC Pulse Patterns on Spark Plasma Sintering Process of [Fe0.8Co0.2B0.05Si0.2]96Nb4 Bulk Metallic Glass
Effect of Ta Addition on Structural Evolution and Mechanical Properties of the CoFeNi2W0.5 High Entropy Alloy
Microstructure Evolution and Hardness of AlCrFeNixMo0.2 High Entropy Alloy
Investigation of Viscosity Measurements of Molten Fe-Si-B-Nb Alloys
Effect of Annealing Treatment on the Microstructure and Magnetic Properties of FeSiBAlNi(C, Ce) High Entropy Alloys
Glass Formation and Thermal Stability of Mechanically Alloyed Al75Ni10Ti10Zr5 Amorphous Composites with Graphene Addition
Effect of Mn Contents on the Phase Transition of the High Entropy Alloy Prepared by Laser Cladding
Influence of Annealing Treatment on Microstructure and Mechanical Properties of Fe-Cu-Si-Al Amorphous Composites
Microstructure and Mechanical Properties of a New Refractory HfNbSi0.5TiVZr High Entropy Alloy
Correlation between Electrical Resistivity and the Structural Evolution of Zr-Based Bulk Amorphous Alloys
Core Losses Separation of Amorphous Alloy Core
Research on Laser Brazing Applying Al-Based Amorphous Ribbon
Liquid Phase Separation and Dual Glassy Structure Formation of Designed Zr-Ce-Co-Cu Alloys
Chapter 2: Magnesium Alloys
Tension-Compression Asymmetry in an Extruded Mg Alloy AZ31: Texture and Strain Rate Effects
Effects of Microstructures on the Tensile Properties and Corrosion Resistance of High-Purity Magnesium
Microstructure and Corrosion Behavior of Hot Compressed AZ31B Magnesium Alloy Joint
Compressive Behavior at Ambient Temperature of ZK60-xDy Magnesium Alloys
Effects of Filtration Purification and Solution Treatment on the Microstructure and Mechanical Property of AZ91D Alloy
Evolution of Microstructure and Mechanical Properties of ZK80 Mg Alloy during Net-Shape Pressing of Extruded Perform
Microstructures and Tensile Properties of Mg-6Gd-3Y-1.4Zn-0.4Zr Alloys
Influence of a Trace Alloying of Ag on the Ageing Behavior and Mechanical Properties of AZ80M Magnesium Alloys
Microstructural Evolution of a Fine-Grained Mg-Y-Nd Alloy during Superplastic Deformation
Effects of Briquette Forming Condition on the Extraction of Magnesium from Calcined Magnesite via Vacuum Aluminothermic Reduction
Effect of Heat Treatment on Microstructures and Properties of AZ40M Alloy
Dynamic Recrystallization Behavior of Mg-Gd-Y-Zr Alloy during Hot Compression
Mechanical Behavior and Microstructure Evolution of Mg-Gd-Y-Zn-Zr Alloy during Multipass Hot Compression Deformation
Effect of Solution Treatment on Corrosion Resistance of the Biodegradable NZ20K Alloy
Preparation and Characterization of As-Cast and As-Extruded Mg-1Mn-0.6Ce-3Y Alloy
Low Temperature Co-Fired ZnNb2O6 Dielectric Ceramic Doped by B2O3
Chapter 3: High Performance Titanium Alloys
Stress Induced Martensitic Transformation in Ti-1023 Alloys
Effect of ? Annealing and near ? Zone Hot Deformation on the Microstructure and Texture of TC18 Alloy
Thermal Stability and Mechanical Properties of Ti-15-3 Titanium Alloy
Microstructural Development around Crater in Commercial Pure Titanium
Cellular Automata Simulation on Dynamic Recrystallization of TA16 Alloy during Hot Deformation
Microstructural Evolution during Forging of Ti-6Al-4V Alloy
Effect of Alpha Phase Characteristics on the High Cycle Fatigue Properties of Ti-6Al-4V Alloy
Deformation Behavior of Ti-6Al-4V-0.1B Alloy Loaded under High Strain Rates
Effect of Hot Forging Strain Rate on the Microstructure and Mechanical Properties of TC4-DT Titanium Alloy
Dynamic Compression Properties of Low-Cost Ti-6Al-4V Plates
Effects of Stress-Relief Annealing on the Residual Stress and the Microstructure of TA15 Welded Joint
Microstructure and Tensile Properties of Boron-Doped Beta Titanium Alloy
Microstructure and Mechanical Properties of TiNiFe Shape Memory Alloys with Different Compositions
Influence of Shot Peening on the Surface Hardness of TC11 Titanium Alloy after High Cycle Fatigue Test
Characterization of Hot Deformation Behavior of Ti-4.5Al-3V-2Mo-2Fe Titanium Alloy
Influence of Upsetting and Drawing Times on the Microstructure and Microtexture of TC4 Titanium Alloy
Microstructure and Mechanical Properties of Powder Metallurgy Ti-22Al-24Nb-0.5Mo Alloys Joints with Electron Beam Welding
Influence of Cooling Rate on Phase Transformation of a ?+? Titanium Alloy
Hot Compressive Deformation Behavior of TC4-DT Titanium Alloy
Influence of Electric Pulse Heat Treatment on the Dynamic Mechanical Behavior of TC6 Titanium Alloy
Study on Rotating Bending Fatigue Property of Ti65 Titanium Alloy
Low Cycle Fatigue Behavior of TA29 Titanium Alloy at Different Temperatures
Prediction of High Cycle Fatigue Property of Ti-6Al-4V Alloy Using Artificial Neural Network
Effects of Aging Temperature on the Microstructure and Mechanical Properties of a Ti2AlNb Based Alloy
Effects of Cold-Rolling Reduction on Microstructure and Mechanical Properties of Ti50Zr30Nb10Ta10 Alloy
Chapter 4: Advanced Metal Matrix Composites
Wetting Behavior and Interface Characteristic of Ti32.8Zr30.2Ni5.3Cu9Be22.7/Ti6Al4V
Investigation of Interface in SiC Fiber Reinforced TC17 Titanium Alloy Matrix Composites
Fabrication and Strengthening Mechanisms of Al/WC Particles Composite Prepared by Accumulative Roll Bonding
Microstructural Difference between Unreinforced Canning of TC17 Alloy and the Matrix in SiCf/TC17 Composite Fabricated by HIP Process
Hot Deformation Behavior and Processing Map of 25%SiCp/2009A1 Composite
Influence of HA and Environmental Factors to the Damping Performance of HA/Mg-3Zn-0.5Zr Composites
Enhanced Tensile Properties of Graphene-Al5083 Composite Prepared by Hot Pressing and Hot Extrusion
Hot Deformation Behaviors and Microstructure Evolution of SiCp/Al Composites
Investigation of the Effect of Argon Arc Welding Parameters on Properties of Thin Plate of In Situ Titanium Matrix Composites
Ambient-Temperature and High-Temperature Tensile Properties of Investment Casted Titanium Matrix Composites with B4C Additions
Chapter 5: High Temperature Structural Materials
Structures and Properties of Welding Seams in Nickel-Base Superalloys
Hot-Gas Corrosion Resistance of DD9 Single Crystal Superalloy
Stress Rupture Properties and Fracture Behavior of DD6 Single Crystal Superalloy
Effect of Degree of Order on Hydrogen Diffusion in (Fe,Ni)3V Alloys
Effect of Long-Term Aging on the Evolution of ?' and TCP Phases of a Ni3Al Based Single Crystal Superalloy
Partition Behavior of Ni between ? and ?' Phases in the New Type Co-Based Superalloys
The Effect of Remelting on the Microstructure and Mechanical Properties of a Nickel Superalloy
Effect of Carbon on the Microstructural Evolution and Thermal Fatigue Behavior of a Ni-Base Superalloy
Effects of Alloying Elements on the Properties of Ni-Mo-Cr Superalloys with Low Thermal Expansion
Studies on Microstructure and Properties by Mass Smelting for Directionally Solidified Superalloy
Research on Effect of Alloy Elements on Equilibrium and Properties of Ni-Cr-Co Type Nickel-Based Superalloy
Influence of Carbides on Stress Rupture Property of a Ni-Base Superalloy
Decreasing Defects of Center Porosity and Improving Secondary Pipe Castings for Superalloy Ingots by Dynamics Methods
The Microstructure and Mechanical Properties of Heat Treated NiCr20TiAl Superalloy
Effect of Sulfur on the Hot Plasticity of GH625 Superalloy
Effect of Al on the Microstructure and Mechanical Properties of HK40 Heat-Resistant Steel at High Temperature
Effect of Microcast-X Fine Grain Casting on the Microstructure and Mechanical Properties of K492M Alloy at 760 degreesC
Role of Cobalt in the Microstructural Stability of Single Crystal Superalloys
Influence of Metallographic Etchant on ?' Precipitates Characterization in a Single Crystal Nickel-Base Superalloy
Influence of Heat Treatment on the Microstructures and Mechanical Properties of K465 Superalloy
Microstructure and Properties of W-Cu Composites Fabricated by Laser Cladding Forming
Microstructure, Mechanical and Tribological Properties of the Rapidly Solidified NiAl/Cr(Mo,Dy) Hypoeutectic Alloy
Microstructure of Chemical Vapor Transport Deposition Single Crystal Tungsten Coating Working at 1600 degreesC
Effect of Trace Strontium Addition on Microstructure and Room Temperature Fracture Toughness of Nb-12Si-22Ti Alloys
Microstructure and Room Temperature Mechanical Properties of a New Corrosion-Resistant Alloy GH945 for Oil and Gas Applications
Phase Diagram and Phase Equilibrium Studies on Ultra High Temperature Alloys of Nb-Si-Ti
Chapter 6: Special Coatings
Laser Brazing Research on Carbon Steel and Stainless Steel Applying Fe-Based Amorphous Coating
Effect of Mo Content on the Corrosion Resistance of Fe-Based Amorphous Composite Coating
Microstructure and Properties of Fe-Based Amorphous Composite Coating Prepared by Pulse Laser
Study on the Corrosion Behavior In Vitro and Mechanical Properties of the FHA Coated Mg-Zn-Zr Alloy
Structure and Properties of W-Ti Thin Films Deposited by Magnetron Sputtering
Preparation and Properties of HfO2-Y2O3 Composite Coating on the Surface of Iridium Coating
Microstructure on Laser In Situ Deposit of TiBx/TiC ReinforcedComposite Coatings
Wear and Corrosion Properties of Crystalline Ni-W Alloy Coatings Prepared by Electrodeposition
Microstructure and Properties of Fe Base Coatings Reinforced by In Situ TiC Particles Using Plasma Jet Surface Metallurgy
Influence of Impact Damage on the Thermal Stress Distribution within the EB-PVD Thermal Barrier Coatings
Effect of the Porosity on Thermal Stress within TBCs Using Finite Element Method
WC Particles Reinforced Co-Based Alloy Coatings Produced by Laser Cladding

In Situ Synthesis and Oxidation Behavior of Ti-Al-Ag Ternary Coatings
Influence of Ti on the Microstructure and Performance of Fe-Cr Alloy Cladding Layer
Modulation of Tribological Performance of Copper by Chemical Modification with H2O2/HCl Mixture
Solar Reflection Characteristics of Phthalocyanine Green/TiO2 Composite Green Pigments Prepared via Different Approaches
SiO2 Cryogel Dispersion in Organic Solvent for the Application as Transparent Heat Insulation Coating on PET
Top-Down Fabrication of Superhydrophilic Graphene Oxide Nanosheets
Chapter 7: Methods of Powder Metallurgy in Creation of High Performance Structural Materials
Fine-Grained W-Ni-Fe Heavy Alloys Prepared by Spark Plasma Sintering
Prediction of Ring Rolling Process of PM Ti2AlNb Alloy by Hot Isostatic Pressing Based on Gleeble-3800 and FE Simulation
Preparation and Welding Performance of Ti-6Al-4V Powder Compact Fabricated by Hot Isostatic Pressing
Isothermal ? Precipitation and Evolution in a Hot-Rolled near ? Titanium Alloy
Preparation and Properties of Aluminum Boron Composite
The Influence of Cylindrical Grinding Medium on Particle Size and Mechanical Properties of TiC Steel Bonded Carbide
Solidification Characterization of K418 Alloy Powders Fabricated by Argon Gas Atomization
Effects of Combined Addition of Cr3C2 and NbC on Microstructure and Properties of Cemented Carbides Prepared by W?-Co Composite Powder
Meso-Structure Design of B4C-Al/Al Composites by Hot Pressing
Preparation and Magnetic Properties of Nanocrystalline FeSiAl Powder Produced with Strip Cast Ingot Process
Flow and Densification Behaviors of Sintered P/F-10C50 Steel under Hot Compression
Fabrication of Zn Alloy Foam via Powder Metallurgical Approach
Fabrication of W-Cu/Lu2O3 Composites with High Strength and Electrical Conductivity Prepared by Electroless Plating and Powder Metallurgy
The Microstructures and Properties of Carbon and Graphite Materials Prepared from Mesocarbon Microbeads by Different Molding Methods
Interface and Damping Capacity of Mg/Al Multilayered Composite Produced by Accumulative Roll Bonding
Effect of High Energy Ball Milling on Structures and Properties of Atomization Fe-Based Nanocrystalline Soft Magnetic Powders
Effects of Paste Composition and Sintering Process on Performance of Silver Paste for Silicon Solar Cells
Structure and Inverse Magnetocaloric Effect of Mn1.2Co0.8Si0.2P0.8 Compound Prepared by SPS
Effect of Ti Element on the Mechanical Properties of Cu-Matrix Bonding Diamond Tool Bits