Methods of Design and Characterization of Materials, Research and Development of Technological Processes
This is the proceedings of the selected papers presented at Chinese Materials Congress 2015 (CMC2015) held in Guiyang, China, July 10-14, 2015.This is the volume for Part 4 including 154 papers selected from 4 symposia of W. Advanced Preparation and Processing of Materials; X. Application of Advanced Characterization Methods in Materials Science; Y. Materials Evaluation and Service Security; Z. Materials Simulation, Calculation and Design
Published on 20. April 2016
Book
Paperback/Softback
1058 pages
978-3-03835-762-9 (ISBN)
Description
This is the proceedings of the selected papers presented at Chinese Materials Congress 2015 (CMC2015) held in Guiyang, China, July 10-14, 2015.
This is the volume for Part 4 including 154 papers selected from 4 symposia of W. Advanced Preparation and Processing of Materials; X. Application of Advanced Characterization Methods in Materials Science; Y. Materials Evaluation and Service Security; Z. Materials Simulation, Calculation and Design
This is the volume for Part 4 including 154 papers selected from 4 symposia of W. Advanced Preparation and Processing of Materials; X. Application of Advanced Characterization Methods in Materials Science; Y. Materials Evaluation and Service Security; Z. Materials Simulation, Calculation and Design
More details
Series
Language
English
Place of publication
Zurich
Switzerland
Target group
College/higher education
Professional and scholarly
Illustrations
Illustrations, unspecified
Dimensions
Height: 240 mm
Width: 170 mm
Thickness: 53 mm
Weight
1900 gr
ISBN-13
978-3-03835-762-9 (9783038357629)
DOI
10.4028/b-Yf3YnR
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Yafang Han | Ying Wu | Guangxian Li
Methods of Design and Characterization of Materials, Research and Development of Technological Processes
This is the proceedings of the selected papers presented at Chinese Materials Congress 2015 (CMC2015) held in Guiyang, China, July 10-14, 2015.This is the volume for Part 4 including 154 papers selected from 4 symposia of W. Advanced Preparation and Processing of Materials; X. Application of Advanced Characterization Methods in Materials Science; Y. Materials Evaluation and Service Security; Z. Materials Simulation, Calculation and Design
Software
04/2016
Trans Tech Publications Ltd
€337.32
Shipment within 10-20 days
Yafang Han | Ying Wu | Guangxian Li
Methods of Design and Characterization of Materials, Research and Development of Technological Processes
This is the proceedings of the selected papers presented at Chinese Materials Congress 2015 (CMC2015) held in Guiyang, China, July 10-14, 2015.This is the volume for Part 4 including 154 papers selected from 4 symposia of W. Advanced Preparation and Processing of Materials; X. Application of Advanced Characterization Methods in Materials Science; Y. Materials Evaluation and Service Security; Z. Materials Simulation, Calculation and Design
E-Book
03/2016
Trans Tech Publications Ltd
€211.86
Available for download
Persons
Eds. Yafang Han, Ying Wu, Guangxian Li, Fusheng Pan, Runhua Fan, Xuefeng Liu
Content
Preface
Chapter 1: Application of Advanced Methods and Experimental Techniques for Analysis of Characteristics and Properties of Materials
X-Ray Powder Diffraction Data and Crystal Refinement of a New Compound AlCrNi3Pr
Crystal Structure of Al2Cu3Nd Ternary Compound
Kinetics of Dynamic Recrystallization of 18 Ni Maraging Steels
Thermodynamic Re-Assessment of the Mn-La Binary System
Thermodynamic Calculations of the Rare Earth Permanent Magnets: Fe-RE Binary Systems
Compression Deformation Flow Stress Behavior and Prediction of Pure Copper
Fracture Toughness Analysis of the China RPV Steel with Miniaturized Specimen
Plastic Deformation and Recrystallization of a Ni-Based Single Crystal Superalloy
Effect of Salt-Deposit Hot Corrosion on Creep Rupture Behaviors of DZ466 Superalloy
Torsion Failure Analysis of 0Cr17Ni7Al Precipitation Hardening Stainless Steel Wire
Determination of Migration of Hazardous Elements from Non-Stick Pan Materials in Five Food Simulants by ICP-MS
Corrosion Behavior of Austenitic Stainless Steel in Hydrochloric Acid Solution and Flow
Creep Model of Natural Fiber Reinforced Polymer Composite
Flexural and Creep Performances of Wood Fiber Reinforced Polymer Composite
Thermal Aging Effect of 17-4PH Martensitic Stainless Steel Valves for Nuclear Power Plant
Analysis of an Axle Failure under Torsional Load
Eddy Current and Metal Magnetic Memory Testing Nondestructive Evaluation for Superficial Defects of Old Cylinder Barrel
Influence of Surface Conditions on the Fatigue Behavior of A357 Aluminum Alloy
Analysis of Rheological Behavior on Transformation Induced Plasticity Steel
Migration Characteristics and Degradation Kinetics of Bisphenol A
Effects of Processing Temperature on Release of Bisphenol A from PC: A Multi-Technique Analytical Study
Effect of Thermal Aging on Migration Characteristics of Heavy Metal in PET
Design and Optimization of the Monochromator for the New Residual Stress Diffractometer
Development and Application of Neutron Imaging Technique at China Advanced Research Reactor
Planning of Energy-Selective Neutron Imaging Instrument at CSNS and its Application Prospect in Materials Science
Residual Stress Analysis in Quenched Aluminum Alloy Plate Using the Contour Method
Characterization of Local Crystal and Electronic Structure on Sr2CuO2F2+x Material by Synchrotron Radiation
Growth of Equiaxed Dendrite in Al-20wt.%Cu Alloy by Synchrotron X-Ray Radiography
Study on the Solidification of Sn-Pb Alloy under Direct Current Field by Synchrotron X-Ray Radiography
In Situ Synchrotron X-Ray Diffraction Study of a Deformed Cu-Fe-P Alloy during Heating
Wear Resistance Research of Advanced High Strength Steels
Research on Microstructure and Properties of Co-Si Alloys by Vacuum Suction Casting
Microstructure Evolution and Constitutive Modeling Based on Flow Behavior of 2297 Al-Cu-Li Alloy
Analysis on Internal Defect of 319S Aluminum Alloy Impeller by Semi-Solid Thioxcasting
Ultrafast Electron Cascades in X-Rays Detector
Welding Thermal Crack Sensitivity Simulation of 9%Ni Steel
A Non-Contact Test Method on Local Mechanical Properties of Weld Joint
Chapter 2: Numerical Simulation, Calculation and Design in Materials Science
Orientation Effects of CH3NH3+ on CH3NH3PbI3 Stability and Photoelectric Properties
Alumina Growth and Interface Strengthening Mechanisms of Pt on the Surface of Bond Coats in EB-PVD TBC System Based on First-Principles
Surface Stability of NiTi Alloy: A Density-Functional Theory Study
Diffusion Behavior of Carbon Atoms in Austenite Region of SCM435 Steel
Investigation on Structures of Aluminum Melts Containing Small Amount of Silicon Element
Effect of Deformation Homogeneity on Grain Refinement of AZ31 Magnesium Alloys Based on FEA during ECAP
Atomistic Study of the Copper Cluster Deposition on Si(001) and Si(111) Surface
Experimental and Numerical Study of Macrosegregation in a 160 Steel Ingot
Grain Growth of Polycrystalline AZ31 Mg Alloy Containing Second Phase Particles by Phase Field Simulation
Size Dependent Bond Length of Metallic Clusters by Considering Bond Number
Correlation between the Local Melt Structure and the Dynamical Properties of Mn, Zn and Si in Liquid Al: An Ab Initio Molecular Dynamics Study
Finite Element Analysis on the Effect of the Texture to the Crack Tip Plasticity in Aluminum Alloy
Prediction of Melt Flow Effects on Dendrite Growth
The Establishment and Application of 316LN Stainless Steel Database for AP1000 Primary Coolant Pipes
Structural, Phonon and Thermodynamic Properties of the Rocksalt Structure LiF from First Principles
Phase Stability and Elastic Properties of ?ne Dimensional Long Period Structures of Al3Ti under High Pressure
DFT Study of Chemisorbed Atomic Oxygen Inducing Co Segregation in CoNi(111) Alloy
Constitutive Model of TRIP600 Based on Rheological Theory
Deformation Twinning in Hexagonal Close-Packed Single Crystals under Uniaxial Compression
Numerical Simulation of Directionally Solidified Industrial Gas Turbine Hollow Blades by Liquid Metal Cooling
Erosion Behavior of Blooie Line in Gas Drilling
Effect of Residual Stresses on Ductile Crack Growth in Pipeline Steel
A Model for Prediction of Yield Stress of Heat Treated Al-7Si-Mg Cast Alloys
Estimation of Average Strain Rate during Equal-Channel Angular Pressing
QSAR Study on Imidazole Derivatives as Corrosion Inhibitors by Genetic Function Approximation Method
Thermodynamic Database of the Phase Diagrams in the Au-RE Binary Systems
Thermodynamic Database of the Phase Diagrams in the Sc-X Binary Systems
Thermodynamic Calculation of Bi-Au-Lu, Nd Ternary Systems
Numerical Simulation of Multi-Pass Welding Temperature Distribution of Jacket Platform Assembly Using SYSWELD Software
A Method to Evaluate the Temper Embrittlement from Step Cooling Test
Chapter 3: Research, Development and Optimization of Metallurgical and Metalworking Technological Processes
Numerical Simulation of Centrifugal Casting Process of Large Thin-Wall Ti Alloy Casting
Development of Cooling Process Control System for Backward UFC in CSP
Synthesis and Characterization of High Purity Ruthenium Sponge
A Setup Calculation Method of Application Platform for Process ?ontrol System of Tandem Cold Rolling Mills
Mechanical Properties and Fracture Behavior of Indirect Squeeze-Cast A354 Alloy Using Local Pressurization
Effect of Mg and Cu Additions on Microstructure and Mechanical Properties of Squeeze Casting Al-Si-Cu-Mg Alloy
Plasma-MIG Hybrid Welding Process of 5083 Marine Aluminum Alloy
Effect of the Spinning Deformation Processing on Microstructure and Mechanical Properties of A356 Wheels
Effect of Two-Step Aging on the Microstructure and Mechanical Properties of Cu-2.7Be Alloys
Numerical Analysis on the Density Uniformity for SiCp/2024Al in the Extrusion Process
Effect of Magnesium Content on Machinability of Cu-Zn-Bi-Sb Alloy
Inhomogeneous Distributions of Sub-Grains and Precipitates in Strip-Cast 3wt% Si Steel Sheet
Effect of Aging Treatment on Microstructure and Properties of Fe-26Mn-7Al-1.3C Austenitic Steel
Effect of Ultrasonic Vibration and Applied Pressure on the Microstructure and Mechanical Property of Al-5.0Cu-0.6Mn-0.6Fe Alloys
Effect of Annealing Time on the Formability of a Ultra Purified Ferritic Stainless Steel Containing Copper
Effect of Cooling Rate on Microstructure and Mechanical Property of Fe-6.5wt%Si Alloy
Effects of Homogenization Temperature on Microstructure of 2A66 Al-Cu-Li Alloy
The Effects of Two-Stage Aging on the Microstructure and Mechanical Properties of the New Al-Si-Cu-Mg Alloy
Effects of Cooling Rate on Morphology of Eutectic Si in RE Modified Al-10wt.%Si Alloy
Solidification Behavior and Mechanical Properties of Al-Si-Mg Alloy with Ti Addition
Preparation and Characterization of Spray Formed 2060 High Speed Steel
Experimental and Numerical Simulation of Surface Segregation in Two-Phase Zone Continuous Casting Cu-Sn Alloy
Analysis of Preform Annealing Process for the Aluminum Automotive Door Inner Panel
Effect of Melt Holding in Mushy Zone on the Nitrogen Content of 201 Austenitic Stainless Steel
Effect of Different Cooling Rates on Microstructure and Property of Continuous Annealing IF Steel
Principle and Model of Phase Transformation in Ultra-High Strength Steel for Cone Crusher
Development of Semi-Solid Die Casting Process Technology for Aluminium Alloy Clamp
Morphology of Iron-Zinc Coating for Hot Press Forming Steel
Study on Grain Refinement and Homogenization of Large-Sized DC Casting Ingot by A-EMS Melt Treatment
Study of the Microstructure and Mechanical Properties of a Medium Manganese Quenching and Partitioning (Q&P) Steel
Microstructure and Mechanical Properties of 7000 Series Al Alloy via Tiny-Molten-Pool Solidification Forming
Inoculation and Fading of Sr-Modified A356.2 Aluminum Alloy in Squeeze Casting
Design and Optimization of Conformal Cooling System of an Injection Molding Chimney
Effects of Solution Temperature on Microstructure of 2A66 Al-Cu-Li Alloy
Effect of Flat Heat Pipe on the Properties of the FSW Joint
Elements Diffusion and Mechanical Properties of 15-5PH Stainless Steel Joint Brazed with BNi-2 Filler Metal
Effect of Rolling Process on Fatigue Property of 2A66 Aluminum-Lithium Alloy Sheet
Effects of Ultrasonic Vibration on the Welding Process of Friction Stir Welding
Study on Microstructures and Components Uniformity of 7050 Aluminum Alloy with Annulus Electromagnetic Stirring Casting
Fast Preparation of Ultrathin FIB Lamellas for MEMs-Based In Situ TEM Experiments
Effect of Rapid Thermal Process on the Recrystallization and Precipitation in Non-Oriented Electrical Steels Produced by Twin-Roll Strip Casting
Effects of Workpiece Size on Temperature Distribution During FSW of AZ31 Magnesium Alloy
Preparation of Alumina Powders through Pyrocatechol, Resorcinol Mediated Sol-Gel Method
Investigations of Microstructure and Phase Composition of Different Self-Shield Flux-Cored Wire Slag System
Effect of Cold Rolling and Heat Treatment on Properties and Microstructure of Cu-24wt%Ag Alloys
Microstructure and Mechanical Properties of Al-1.1Mg-0.6Si-0.4Cu Alloy Manufactured by Casting-Forging Integrated Technology
Effect of Heat Treatment on the Microstructure and Property of Al-Si-Mg Alloy
Effect of Solution Treatment on Microstructure Evolution and Mechanical Behavior of Cu-20Ni-20Mn Alloy
Microstructure and Mechanical Properties of a Fine-Grained AZ91 Magnesium Alloy Prepared by Multi-Pass Friction Stir Processing
Effect of Enhanced Cooling on the Microstructure and Mechanical Properties of Friction Stir Spot-Welded AZ31 Magnesium Alloy
Semi-Solid Moulding of AZ91D Magnesium Alloy
Research on Microstructure and Mechanical Properties Evolution of Rheocast and Thixocast 319s Aluminum Alloy
Research on the Formation Mechanism of Emulsion Spots on the Cold-Rolled Silicon Steel Surface
Effect of Aging Treatment Technology on Properties of Al-Mg-Si-Cu-Zr-Er Alloy for Auto Sheets
Mechanical Properties and Microstructures of 5052 Al Alloy Processed by Asymmetric Cryorolling
Discharge Enhancement Effect of Inorganic Nanometer Spark Plasma Sintering Aid
Genetic Characteristics and Mechanical Properties of High-Siliconaluminum Alloy by Rapid Solidification and Spark Plasma Sintering
Influence of Processing Procedure on Mechanical Properties of A319 by Comparison between Casting and Powder Metallurgy
Study on Heat Treatment of the C-276/Q235-B Bimetallic Composite Plate
Influence of Different Conditions on the Precipitation of Metatitanic Acid to Synthesis Rutile TiO2 via Sulfuric Acid Process
Investigation on Grain Size Effect of Rolling Texture in Copper
Numerical and Experimental Study of Temperature Rise Effect on Copper during Equal Channel Angular Pressing
Chapter 4: Materials and Technologies for Pipe Industry and Pipelines
Toughness of X80 Grade Pipe Steel Girth Welds by Curved Wide Plate Testing
Engineering Critical Assessment for the Flaws in the Pipeline Steel Girth Weld
Stress Analysis for the Tie-in Girth Weld of X90 Pipeline
Process, Microstructure and Mechanical Properties of X90 Pipeline Steel
Constraint Effect on the Ductile Fracture Behavior of High-Strength Pipeline Steels
Simulated HAZ Continuous Cooling Transformation of X90 Pipeline Steel
Bending and Tempering Process of L415M Hot Induction Bend Used in Low Temperatures Areas
Continuous Cooling Phase Transformation Rules of High Nb X80 Pipeline Steel
Short-Term Creep Behavior in P91 Heat-Resistant Steel at Low Stress
Water Absorption of Polyethylene Heat-Shrinkable Tape
Corrosion Failure Analysis of a New L360 Pipeline
Experimental Research and Production of Heavy Gauge DNV 485FDU for Deep Water Trunkline Project
Microstructure and Properties of Weld CGHAZ under Different Heat Input for X90 Pipeline Steel
Residual Strength Analysis of Oil Tubes with Corrosion Defect
Contrastive Study on Finite Element Models of High-Strength Pipelines Crossing Active Faults
Mechanisms of Thermo-Mechanical Process on Grain Boundary Character Distribution of 316L Austenitic Stainless Steel
Analysis of N80 Tubing Failure for CBM Well Drainage
Failure Analysis on a Non-Occupation Refined-Oil Pipeline
Influence of Deformation and Temperature on the Austenitic Stainless Steel Performance
Effects of Finish Cooling Temperature on Microstructure and Properties of X100 Pipeline Steels
Feasibility of FRP as the Oil and Gas Long-Distance Pipeline Material in the Area with the High Voltage Electric-Power Line
Microstructure and Mechanical Properties of the Weld Joint of Small Diameter Glass-Lined Metal Pipe with Inner Surface Layer
Analysis on Fracture Toughness of the L415MS/N08825 Bimetallic Composite Pipe Welded Joint
Effect of Ferrous Ion on the Corrosion Behaviour of 410 Stainless Steel in Wet H2S Environment
Effect of Heat Treatment on the Microstructure and Mechanical Property of x90 Bend Pipe
Chapter 1: Application of Advanced Methods and Experimental Techniques for Analysis of Characteristics and Properties of Materials
X-Ray Powder Diffraction Data and Crystal Refinement of a New Compound AlCrNi3Pr
Crystal Structure of Al2Cu3Nd Ternary Compound
Kinetics of Dynamic Recrystallization of 18 Ni Maraging Steels
Thermodynamic Re-Assessment of the Mn-La Binary System
Thermodynamic Calculations of the Rare Earth Permanent Magnets: Fe-RE Binary Systems
Compression Deformation Flow Stress Behavior and Prediction of Pure Copper
Fracture Toughness Analysis of the China RPV Steel with Miniaturized Specimen
Plastic Deformation and Recrystallization of a Ni-Based Single Crystal Superalloy
Effect of Salt-Deposit Hot Corrosion on Creep Rupture Behaviors of DZ466 Superalloy
Torsion Failure Analysis of 0Cr17Ni7Al Precipitation Hardening Stainless Steel Wire
Determination of Migration of Hazardous Elements from Non-Stick Pan Materials in Five Food Simulants by ICP-MS
Corrosion Behavior of Austenitic Stainless Steel in Hydrochloric Acid Solution and Flow
Creep Model of Natural Fiber Reinforced Polymer Composite
Flexural and Creep Performances of Wood Fiber Reinforced Polymer Composite
Thermal Aging Effect of 17-4PH Martensitic Stainless Steel Valves for Nuclear Power Plant
Analysis of an Axle Failure under Torsional Load
Eddy Current and Metal Magnetic Memory Testing Nondestructive Evaluation for Superficial Defects of Old Cylinder Barrel
Influence of Surface Conditions on the Fatigue Behavior of A357 Aluminum Alloy
Analysis of Rheological Behavior on Transformation Induced Plasticity Steel
Migration Characteristics and Degradation Kinetics of Bisphenol A
Effects of Processing Temperature on Release of Bisphenol A from PC: A Multi-Technique Analytical Study
Effect of Thermal Aging on Migration Characteristics of Heavy Metal in PET
Design and Optimization of the Monochromator for the New Residual Stress Diffractometer
Development and Application of Neutron Imaging Technique at China Advanced Research Reactor
Planning of Energy-Selective Neutron Imaging Instrument at CSNS and its Application Prospect in Materials Science
Residual Stress Analysis in Quenched Aluminum Alloy Plate Using the Contour Method
Characterization of Local Crystal and Electronic Structure on Sr2CuO2F2+x Material by Synchrotron Radiation
Growth of Equiaxed Dendrite in Al-20wt.%Cu Alloy by Synchrotron X-Ray Radiography
Study on the Solidification of Sn-Pb Alloy under Direct Current Field by Synchrotron X-Ray Radiography
In Situ Synchrotron X-Ray Diffraction Study of a Deformed Cu-Fe-P Alloy during Heating
Wear Resistance Research of Advanced High Strength Steels
Research on Microstructure and Properties of Co-Si Alloys by Vacuum Suction Casting
Microstructure Evolution and Constitutive Modeling Based on Flow Behavior of 2297 Al-Cu-Li Alloy
Analysis on Internal Defect of 319S Aluminum Alloy Impeller by Semi-Solid Thioxcasting
Ultrafast Electron Cascades in X-Rays Detector
Welding Thermal Crack Sensitivity Simulation of 9%Ni Steel
A Non-Contact Test Method on Local Mechanical Properties of Weld Joint
Chapter 2: Numerical Simulation, Calculation and Design in Materials Science
Orientation Effects of CH3NH3+ on CH3NH3PbI3 Stability and Photoelectric Properties
Alumina Growth and Interface Strengthening Mechanisms of Pt on the Surface of Bond Coats in EB-PVD TBC System Based on First-Principles
Surface Stability of NiTi Alloy: A Density-Functional Theory Study
Diffusion Behavior of Carbon Atoms in Austenite Region of SCM435 Steel
Investigation on Structures of Aluminum Melts Containing Small Amount of Silicon Element
Effect of Deformation Homogeneity on Grain Refinement of AZ31 Magnesium Alloys Based on FEA during ECAP
Atomistic Study of the Copper Cluster Deposition on Si(001) and Si(111) Surface
Experimental and Numerical Study of Macrosegregation in a 160 Steel Ingot
Grain Growth of Polycrystalline AZ31 Mg Alloy Containing Second Phase Particles by Phase Field Simulation
Size Dependent Bond Length of Metallic Clusters by Considering Bond Number
Correlation between the Local Melt Structure and the Dynamical Properties of Mn, Zn and Si in Liquid Al: An Ab Initio Molecular Dynamics Study
Finite Element Analysis on the Effect of the Texture to the Crack Tip Plasticity in Aluminum Alloy
Prediction of Melt Flow Effects on Dendrite Growth
The Establishment and Application of 316LN Stainless Steel Database for AP1000 Primary Coolant Pipes
Structural, Phonon and Thermodynamic Properties of the Rocksalt Structure LiF from First Principles
Phase Stability and Elastic Properties of ?ne Dimensional Long Period Structures of Al3Ti under High Pressure
DFT Study of Chemisorbed Atomic Oxygen Inducing Co Segregation in CoNi(111) Alloy
Constitutive Model of TRIP600 Based on Rheological Theory
Deformation Twinning in Hexagonal Close-Packed Single Crystals under Uniaxial Compression
Numerical Simulation of Directionally Solidified Industrial Gas Turbine Hollow Blades by Liquid Metal Cooling
Erosion Behavior of Blooie Line in Gas Drilling
Effect of Residual Stresses on Ductile Crack Growth in Pipeline Steel
A Model for Prediction of Yield Stress of Heat Treated Al-7Si-Mg Cast Alloys
Estimation of Average Strain Rate during Equal-Channel Angular Pressing
QSAR Study on Imidazole Derivatives as Corrosion Inhibitors by Genetic Function Approximation Method
Thermodynamic Database of the Phase Diagrams in the Au-RE Binary Systems
Thermodynamic Database of the Phase Diagrams in the Sc-X Binary Systems
Thermodynamic Calculation of Bi-Au-Lu, Nd Ternary Systems
Numerical Simulation of Multi-Pass Welding Temperature Distribution of Jacket Platform Assembly Using SYSWELD Software
A Method to Evaluate the Temper Embrittlement from Step Cooling Test
Chapter 3: Research, Development and Optimization of Metallurgical and Metalworking Technological Processes
Numerical Simulation of Centrifugal Casting Process of Large Thin-Wall Ti Alloy Casting
Development of Cooling Process Control System for Backward UFC in CSP
Synthesis and Characterization of High Purity Ruthenium Sponge
A Setup Calculation Method of Application Platform for Process ?ontrol System of Tandem Cold Rolling Mills
Mechanical Properties and Fracture Behavior of Indirect Squeeze-Cast A354 Alloy Using Local Pressurization
Effect of Mg and Cu Additions on Microstructure and Mechanical Properties of Squeeze Casting Al-Si-Cu-Mg Alloy
Plasma-MIG Hybrid Welding Process of 5083 Marine Aluminum Alloy
Effect of the Spinning Deformation Processing on Microstructure and Mechanical Properties of A356 Wheels
Effect of Two-Step Aging on the Microstructure and Mechanical Properties of Cu-2.7Be Alloys
Numerical Analysis on the Density Uniformity for SiCp/2024Al in the Extrusion Process
Effect of Magnesium Content on Machinability of Cu-Zn-Bi-Sb Alloy
Inhomogeneous Distributions of Sub-Grains and Precipitates in Strip-Cast 3wt% Si Steel Sheet
Effect of Aging Treatment on Microstructure and Properties of Fe-26Mn-7Al-1.3C Austenitic Steel
Effect of Ultrasonic Vibration and Applied Pressure on the Microstructure and Mechanical Property of Al-5.0Cu-0.6Mn-0.6Fe Alloys
Effect of Annealing Time on the Formability of a Ultra Purified Ferritic Stainless Steel Containing Copper
Effect of Cooling Rate on Microstructure and Mechanical Property of Fe-6.5wt%Si Alloy
Effects of Homogenization Temperature on Microstructure of 2A66 Al-Cu-Li Alloy
The Effects of Two-Stage Aging on the Microstructure and Mechanical Properties of the New Al-Si-Cu-Mg Alloy
Effects of Cooling Rate on Morphology of Eutectic Si in RE Modified Al-10wt.%Si Alloy
Solidification Behavior and Mechanical Properties of Al-Si-Mg Alloy with Ti Addition
Preparation and Characterization of Spray Formed 2060 High Speed Steel
Experimental and Numerical Simulation of Surface Segregation in Two-Phase Zone Continuous Casting Cu-Sn Alloy
Analysis of Preform Annealing Process for the Aluminum Automotive Door Inner Panel
Effect of Melt Holding in Mushy Zone on the Nitrogen Content of 201 Austenitic Stainless Steel
Effect of Different Cooling Rates on Microstructure and Property of Continuous Annealing IF Steel
Principle and Model of Phase Transformation in Ultra-High Strength Steel for Cone Crusher
Development of Semi-Solid Die Casting Process Technology for Aluminium Alloy Clamp
Morphology of Iron-Zinc Coating for Hot Press Forming Steel
Study on Grain Refinement and Homogenization of Large-Sized DC Casting Ingot by A-EMS Melt Treatment
Study of the Microstructure and Mechanical Properties of a Medium Manganese Quenching and Partitioning (Q&P) Steel
Microstructure and Mechanical Properties of 7000 Series Al Alloy via Tiny-Molten-Pool Solidification Forming
Inoculation and Fading of Sr-Modified A356.2 Aluminum Alloy in Squeeze Casting
Design and Optimization of Conformal Cooling System of an Injection Molding Chimney
Effects of Solution Temperature on Microstructure of 2A66 Al-Cu-Li Alloy
Effect of Flat Heat Pipe on the Properties of the FSW Joint
Elements Diffusion and Mechanical Properties of 15-5PH Stainless Steel Joint Brazed with BNi-2 Filler Metal
Effect of Rolling Process on Fatigue Property of 2A66 Aluminum-Lithium Alloy Sheet
Effects of Ultrasonic Vibration on the Welding Process of Friction Stir Welding
Study on Microstructures and Components Uniformity of 7050 Aluminum Alloy with Annulus Electromagnetic Stirring Casting
Fast Preparation of Ultrathin FIB Lamellas for MEMs-Based In Situ TEM Experiments
Effect of Rapid Thermal Process on the Recrystallization and Precipitation in Non-Oriented Electrical Steels Produced by Twin-Roll Strip Casting
Effects of Workpiece Size on Temperature Distribution During FSW of AZ31 Magnesium Alloy
Preparation of Alumina Powders through Pyrocatechol, Resorcinol Mediated Sol-Gel Method
Investigations of Microstructure and Phase Composition of Different Self-Shield Flux-Cored Wire Slag System
Effect of Cold Rolling and Heat Treatment on Properties and Microstructure of Cu-24wt%Ag Alloys
Microstructure and Mechanical Properties of Al-1.1Mg-0.6Si-0.4Cu Alloy Manufactured by Casting-Forging Integrated Technology
Effect of Heat Treatment on the Microstructure and Property of Al-Si-Mg Alloy
Effect of Solution Treatment on Microstructure Evolution and Mechanical Behavior of Cu-20Ni-20Mn Alloy
Microstructure and Mechanical Properties of a Fine-Grained AZ91 Magnesium Alloy Prepared by Multi-Pass Friction Stir Processing
Effect of Enhanced Cooling on the Microstructure and Mechanical Properties of Friction Stir Spot-Welded AZ31 Magnesium Alloy
Semi-Solid Moulding of AZ91D Magnesium Alloy
Research on Microstructure and Mechanical Properties Evolution of Rheocast and Thixocast 319s Aluminum Alloy
Research on the Formation Mechanism of Emulsion Spots on the Cold-Rolled Silicon Steel Surface
Effect of Aging Treatment Technology on Properties of Al-Mg-Si-Cu-Zr-Er Alloy for Auto Sheets
Mechanical Properties and Microstructures of 5052 Al Alloy Processed by Asymmetric Cryorolling
Discharge Enhancement Effect of Inorganic Nanometer Spark Plasma Sintering Aid
Genetic Characteristics and Mechanical Properties of High-Siliconaluminum Alloy by Rapid Solidification and Spark Plasma Sintering
Influence of Processing Procedure on Mechanical Properties of A319 by Comparison between Casting and Powder Metallurgy
Study on Heat Treatment of the C-276/Q235-B Bimetallic Composite Plate
Influence of Different Conditions on the Precipitation of Metatitanic Acid to Synthesis Rutile TiO2 via Sulfuric Acid Process
Investigation on Grain Size Effect of Rolling Texture in Copper
Numerical and Experimental Study of Temperature Rise Effect on Copper during Equal Channel Angular Pressing
Chapter 4: Materials and Technologies for Pipe Industry and Pipelines
Toughness of X80 Grade Pipe Steel Girth Welds by Curved Wide Plate Testing
Engineering Critical Assessment for the Flaws in the Pipeline Steel Girth Weld
Stress Analysis for the Tie-in Girth Weld of X90 Pipeline
Process, Microstructure and Mechanical Properties of X90 Pipeline Steel
Constraint Effect on the Ductile Fracture Behavior of High-Strength Pipeline Steels
Simulated HAZ Continuous Cooling Transformation of X90 Pipeline Steel
Bending and Tempering Process of L415M Hot Induction Bend Used in Low Temperatures Areas
Continuous Cooling Phase Transformation Rules of High Nb X80 Pipeline Steel
Short-Term Creep Behavior in P91 Heat-Resistant Steel at Low Stress
Water Absorption of Polyethylene Heat-Shrinkable Tape
Corrosion Failure Analysis of a New L360 Pipeline
Experimental Research and Production of Heavy Gauge DNV 485FDU for Deep Water Trunkline Project
Microstructure and Properties of Weld CGHAZ under Different Heat Input for X90 Pipeline Steel
Residual Strength Analysis of Oil Tubes with Corrosion Defect
Contrastive Study on Finite Element Models of High-Strength Pipelines Crossing Active Faults
Mechanisms of Thermo-Mechanical Process on Grain Boundary Character Distribution of 316L Austenitic Stainless Steel
Analysis of N80 Tubing Failure for CBM Well Drainage
Failure Analysis on a Non-Occupation Refined-Oil Pipeline
Influence of Deformation and Temperature on the Austenitic Stainless Steel Performance
Effects of Finish Cooling Temperature on Microstructure and Properties of X100 Pipeline Steels
Feasibility of FRP as the Oil and Gas Long-Distance Pipeline Material in the Area with the High Voltage Electric-Power Line
Microstructure and Mechanical Properties of the Weld Joint of Small Diameter Glass-Lined Metal Pipe with Inner Surface Layer
Analysis on Fracture Toughness of the L415MS/N08825 Bimetallic Composite Pipe Welded Joint
Effect of Ferrous Ion on the Corrosion Behaviour of 410 Stainless Steel in Wet H2S Environment
Effect of Heat Treatment on the Microstructure and Mechanical Property of x90 Bend Pipe