Materials and Processes Technologies V
Selected, peer reviewed papers from the 5th International Conference on Manufacturing Science and Engineering (ICMSE 2014), April 19-20, 2014, Shanghai, China
Published on 16. July 2014
Book
Paperback/Softback
2870 pages
978-3-03835-121-4 (ISBN)
Description
Collection of selected, peer reviewed papers from the 2014 International Conference on Manufacturing Science and Engineering (ICMSE 2014), April 19-20, 2014, Shanghai, China.
The 508 papers are grouped as follows:
Chapter 1: Alloys and Non-Ferrous Materials,
Chapter 2: Iron and Steel,
Chapter 3: Composites,
Chapter 4: Micro/Nano Materials and Technologies,
Chapter 5: Ceramics,
Chapter 6: Optical/Electronic/Magnetic Materials and Technologies,
Chapter 7: Building and Construction Research,
Chapter 8: Environment-Friendly Materials,
Chapter 9: Biomaterials and Bioresearch,
Chapter 10: Polymer Materials,
Chapter 11: Film Materials,
Chapter 12: Textile Materials and Technologies,
Chapter 13: Corrosion and Surface Treatment Technology,
Chapter 14: Materials Mechanical Behavior and Fracture,
Chapter 15: Surface Engineering / Coatings Technology,
Chapter 16: Forming Technologies,
Chapter 17: Material Machining,
Chapter 18: Welding and Joining,
Chapter 19: Micro-Fabrication Techniques,
Chapter 20: Laser Processing Technology,
Chapter 21: Machining Tools, Testing Technologies and Error Measurement,
Chapter 22: Modeling, Analysis and Simulation of Processes,
Chapter 23: Thermal Engineering Theory and Applications,
Chapter 24: Mineral and Soil Mining and Processing
The 508 papers are grouped as follows:
Chapter 1: Alloys and Non-Ferrous Materials,
Chapter 2: Iron and Steel,
Chapter 3: Composites,
Chapter 4: Micro/Nano Materials and Technologies,
Chapter 5: Ceramics,
Chapter 6: Optical/Electronic/Magnetic Materials and Technologies,
Chapter 7: Building and Construction Research,
Chapter 8: Environment-Friendly Materials,
Chapter 9: Biomaterials and Bioresearch,
Chapter 10: Polymer Materials,
Chapter 11: Film Materials,
Chapter 12: Textile Materials and Technologies,
Chapter 13: Corrosion and Surface Treatment Technology,
Chapter 14: Materials Mechanical Behavior and Fracture,
Chapter 15: Surface Engineering / Coatings Technology,
Chapter 16: Forming Technologies,
Chapter 17: Material Machining,
Chapter 18: Welding and Joining,
Chapter 19: Micro-Fabrication Techniques,
Chapter 20: Laser Processing Technology,
Chapter 21: Machining Tools, Testing Technologies and Error Measurement,
Chapter 22: Modeling, Analysis and Simulation of Processes,
Chapter 23: Thermal Engineering Theory and Applications,
Chapter 24: Mineral and Soil Mining and Processing
More details
Series
Language
English
Place of publication
Zurich
Switzerland
Target group
Professional and scholarly
College/higher education
Illustrations
Illustrations, unspecified
Dimensions
Height: 240 mm
Width: 170 mm
Thickness: 144 mm
Weight
4600 gr
ISBN-13
978-3-03835-121-4 (9783038351214)
DOI
10.4028/b-TNxIy3
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Jing Tao Han | Xianghua Liu | Zheng Yi Jiang
Materials and Processes Technologies V
Software
07/2014
Trans Tech Publications Ltd
€594.79
Shipment within 10-15 days
Jing Tao Han | Xianghua Liu | Zheng Yi Jiang
Materials and Processes Technologies V
E-Book
06/2014
Trans Tech Publications Ltd
€211.86
Available for download
Content
Preface and Conference Organization
Chapter 1: Alloys and Non-Ferrous Materials
Influence of Overburning on Microstructure and Property of 2024 Aluminum Alloy
Effects of Nb Element on Mircostructure, Thermal Conductivity and Melting Point of Cu-Ni-Nb Alloy Prepared by Vacuum Arc-Melting
Dissolution of Alumina in Molten Aluminum Electrolyte Based on Perforated Anode
Surface Characterization and Machinability of Zirconium Alloys in View of Jewelry Application
Hot Deformation Behavior and Microstructural Evolution of Al-Zn-Mg-Cu Alloy with Different Starting Structures
Discussion on Technologies of Preparation of Foam Aluminum Metallic Material by Infiltration Casting Method
Effect of Indium on Precipitation Kinetics of an Al8Si0.4Mg Cast Alloy
Influence of MgO on Calcium Aluminate Slag System with Lower Calcium
Processing Map of Mg-13Al-3Ca-3Zn-1Nd-0.2Mn Magnesium Alloy
Structure and Dynamical Relaxation in Undercooled Liquid of Cu50Co50 with Miscible Gap
The Effect of Mixed RE Elements on Microstructure and Mechanical Properties of Die-Cast AZ91D Alloy
Use of Strain Energy Density W and Qo as Quality Indices to Study the Effect of Hipping on Cast Aluminium Alloy 354 under Different Aging Conditions
Strain Rate Sensitivity and Adiabatic Shear Deformation of an Advanced Al-Mg Alloy
Comparison of Mechanical Properties of 357-T6 Aluminum Alloy Aast under Gravity Permanent Casting and Low Pressure Die Casting
Diffusion Bonding of Commercially Pure Titanium to Q235B Using Copper as Interlayer
Mechanical Properties of A356 Aluminum Cast Alloy Shaped by Permanent Mold Casting
Superplasticity Mg Alloy Fabricated by Friction Stir Processing
The Technique Study on Silicon Brass Recrystallization Annealing Aided by Electric Pulse Treatment
Wettability, Surface Tension and Work of Adhesion of Cu-Ti Alloys on Yttria Partially-Stabilized Zirconia at 1273K
Combustion Synthesis Sintering of Ni-Al Powder Alloys
Influence of High Magnetic Field on ?-a Phase Transformation in TC4 Titanium Alloy
Low Temperature Superplasticity of 5083 Aluminum Alloy
Prediction of TCP Phases in Nickel-Base Superalloys
Chapter 2: Iron and Steel
Bake Hardening Properties of Ultra-Rapid Annealed Ultra-Low Carbon Bake Hardening Steel
Study on Internal Quality of Billets for 20CrMnTiH Steel
Study on Microstructure and Properties of X80 Pipeline Steel
Study on Microstructure and Property in Heat-Affected Zone of X80 Pipeline Steel
Thermal Simulation Study of CGHAZ Austenite Grain Growth Behavior of X80 Pipeline Steel
Research on Mechanics Performance of TP304H Austenitic Stainless Steel in the Process of Aging at High Temperature
Experimental Study on Hydrogen Selective-Reduction of Niobium Containing Iron Ore Powder
Research on the Corrosive Factors of Q235 Steel in Simulate Ammonium Sulfate Solution of Ammonia Desulphurization
Microstructure and Mechanical Property Analyses of Brazing Titanium and Low Carbon Steel Using Silver-Based Brazing Alloy
Research and Application of Basic Tundish Covering Flux
Research of Producing Reduction Steel Powder from GCr15 Steel Scrap
The Research Status of Titanium Clad Steel
Oxidation Behavior of T91 Steel in Water Vapor Atmosphere at 750 degreesC
Research on the Size Distribution of Intragranular and Boundary Carbides of T91 Steel after Creep
Analysis on Alloying Elements of Selective Oxidation of TRIP Steel
High Temperature Oxidation Behavior of SUS310S Austenitic Stainless Steel
Preparation and Characterization of Iron-Oxide-Coated-Zeolite Adsorbent
Experimental Study on Refractory Weathering Steel Cold-Rolled Sheets Recrystallization Annealing
Analysis of Boride Phase Composition in High Boron Alloyed Stainless Steel Containing Titanium
Chapter 3: Composites
Synthesis of Sulfur-Doped Graphene from Sulfonated Polystyrene
The Properties of the Sodium Silicate Binder Composition Based on Quartzite Deposits
Study on Microstructure of Continuous Cf/Al Composite Material Prepared by Hot Pressing Diffusion Method
Change Regulation of Hardness of Target around Crater Penetrated by Wf/Zr-Based Amorphous Matrix Composite Projectile
Adsorption of Cu(II) from Aqueous Solution onto Na-Bentonite/Poly AMPS/AA/AM Composite
Effects of Fillers on the Dynamic Properties of a High Performance Elastomer at Varying Strain Amplitude
Morphology, Thermal, Dynamic Mechanical and Mechanical Properties of Long Glass Fiber Reinforced Thermoplastic Polyurethane Elastomers and Polyvinyl Chloride Composites
Investigation of Surface Roughness after Turning of One Kind of the Bio-Material with Thermoplastic Matrix and Natural Fibers
Microstructure and Tribological Properties of Cu-Fe Based Braking Materials
Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite Materials
The Fabrication of High Silicon-Aluminum Composites and the Thermal Conductivity
Study on Properties of Modified Porous Starch/ Natural Rubber Composite
The Influence of SiO2 on Properties of Cellulose Aerogel
Design, Fabrication and Characterization of Fused Silica-Based Composites with an LTCC-Derived FSS
Effect of Cycle Index on the Microstructural Evolution of Alumina Particles Reinforced Aluminum Composites Treated by Cryogenic Treatment
Influence of Cooling Speed on the Microstructure of Particles Reinforced 7055Al Composites Subject to Regulatory Cryogenic Treatment
Preparation and Characterization of Resin-Derived Carbon Foams Containing Hollow Microspheres
A Study of Polyurethane Rubber Composite Modified Asphalt Mixture
Fluorescence Properties of Electrospun Bio-Based Polyamide/Eu(TTA)3phen Composite Fibers
Preparation of Poly(m-toluidine)/Montmorillonite Composites and its Thermal Stability
Effect of Diffusion Annealing on Defects Reduction of 6.5wt% High Silicon Steel Composite Plate after Hot Deformation
Investigation of Heat Treatment's Influence on the Preparation of High Silicon Steel Composite Sheet
Iron Loss Measurement on 6.5wt%Si Composite Plate Prepared by Clad Casting and Conventional Rolling Processes
Production of 6.5wt%Si Composite Thin Sheet by Cold Rolling Process
Study on Heating Treatment of 45steel/60Si2CrA Multi-Layer Composite Armor Plate
Study on Mechanical Property of 1Cr17/9Cr18MoV Multilayer Composite Armor Plate
Study on Superabsorbent Material in Thermal Infrared Camouflage
Chapter 4: Micro/Nano Materials and Technologies
A Hydrogen Peroxide Electrochemical Sensor Based on Co-Doped Fe3O4 Nanoparticles
Effect of Collect Distance on the Fabrication of Aligned Nanofiber by Parallel Electrode
Research Profiling of Carbon Nanotubes from 2000 to 2013
The Raman Properties of Ag Doped ZnO Microrods Synthesized by Chemical Vapour Deposition
Large-Scale Synthesis of Water-Dissoluble Nanorods
Fabrication of PLA Nanoporous Fibers by DMF/CF Mixed Solvent via Electrospinning
Fabrication of PEG Hydrogel and PDMS Microstructures by a Simple UV Curing Process for Nanobio-Chip Applications
Performance of Electrospun Nanofibres on Adsorbing Gaseous Aromatic Compounds
Properties of Metallic Materials after Surface Self Nano-Crystallization
Simulation of Electric Field for Carbon Nanotube Assembly by Dielectrophoresis
The Influence of Zn/Zr Ratios on CuO-ZnO-ZrO2 Catalysts for Methanol Synthesis from CO2 Hydrogenation
Modification of the Fine - Aggregate Concrete by High Disperse Silica Fume and Carbon Nanoparticles Containing Modifiers
Preparation and Mechanics Properties of the EP/TiO2 Nanocomposites
Progress of Studies on Fabrication of TiO2 Nanotube Arrays on Ti or Ti Alloys by Anodization
Study on Preparation and Property of Regenerated Liquid Reactive Dyes Regenerated Magenta
The Effect of Different Ratio in Carbon Aerogel on Pore Structure in Ambient Dry
Influence of Softener on Rheological Characteristics of the Nanostructured Modifier
Insertion versus Growth of Magnetic Nanoparticles in MgB2 Superconducting Composites
High Density Dislocation and Magnetoplasticity in Nano-Sized Alumina Reinforced 7055Al Composites Subject to High Magnetic Field
Effect of Carbon Nanotubes on Microstructure of Multiphase Composite Al2O3 Ceramics
Quasicontinuum Analysis of Dislocation Propagation during Nanocontact
Prepare and Formaldehyde Sensing Properties of Hollow Nanofibers In2O3
Polarization Dependent Nonlinear Absorption in Au Nanowire Array
Research on Surface Modification of Nano-TiO2
Enhanced Mechanical Performance of Electrospun Graphene/Polyacrylonitrile (PAN) Composite Microfibrous Yarns via Post-Processing
Influence of Complexing Agent on the Structure and Properties of Electrodeposited Fe-Co Alloy Nanowires
Chapter 5: Ceramics
Dispersion Stability of Hydroxyapatite-Calcium Phosphate Glass Ceramic-Tertiary Butyl Alcohol System
Microwave Dielectric Properties of Low-Fired Nd2Ti2SiO9 Ceramics with BaCu (B2O5) Addition
Effects of Cr2O3 Addition on Mechanical and Electrical Properties of Alumina Ceramic
Effect of Copper Micro-Scale Excess on the Dielectric Properties of CaCu3Ti4O12 Ceramics Prepared via Tape Casting
Effect of H3BO3 Additive and Forming Pressure on Microwave Dielectric Properties of 0.95MgTiO3-0.05CaTiO3
Sintering Behavior of Lead Oxide Ceramic Prepared by Microwave Sintering
Research and Transformation of Rotary Surface Discharge Machining Equipment of Engineering Ceramic
Effect of Tb4O7 Doping on Wear Resistance of High-Alumina Ceramic
Low-Temperature-Tunnel of High-Alumina Ceramics with Good Wear Resistance
Preparation of the System of MgO-CaO-SiO2-Al2O3-Y2O3Wear-Resistant Alumina Ceramics
Study of Nonlinear Current-Voltage Characteristic of Semiconductor Ceramic by the Method of Tilted Energy Band
The Ways to the Main Problems in the Application of Low Temperature Co-Fired Ceramics Technology (LTCC)
Study on the Crystal Bonding Mechanism of Al2O3-ZrO2 Ceramic Composite
Effect of Calcite Content on Firing Characteristics and its Sintering Properties of Nixing Pottery
Analysis of Pop-In Phenomenon in the Process of Ceramic Materials Instrumented Indentation
Chapter 6: Optical/Electronic/Magnetic Materials and Technologies
A Life Prediction Model for LEDs Lamps Based on the Thermal Life Theory
Characteristics Research of Gallium Arsenide Solar Cells under Femtosecond Laser Illumination
Research on the Mechanism and Model of Contact Resistance
Test Systems for Life of LED Light Based on Junction Temperature
The Modification of Anatase TiO2 (001) Surface by N or S Atom: A DFT Investigation
Effect of Temperature on LiMn2O4 Prepared by Molten-Salt Combustion Synthesis
Electrochemical Title Performance of LiMn2O4 Synthesized by Flameless Solution Combustion with Acetate System
Carrier Injection in High Gain GaAs Photoconductive Semiconductor Switches
Modeling of the Stress-Dependent Hysteretic Dynamics of Ferroelectric Materials
Synthesis, Characterization and Photophysical Properties of a New CuI Complexe Contain Bis[2-(diphenylphosphino)phenyl] ether and 7,10-Dimethyl Pyrazino [2,3-f][1,10]phenanthroline
Research on Bonded NdFeB Arc-Magnets
Electron Avalanche Domains in High Gain Semi-Insulating GaAs Photoconductive Semiconductor Switches
Manufacture Technology for Large Lightweight Optical Materials
A PbS/ITO/Glass Based Photoelectrochemical Cell with a Sponge-Like Surface Structure
Photoionization in GaAs Photoconductive Semiconductor Switches
Research and Implementation on Methods of Evaluating Lifetime of LED Light Source for LED Lighting System
Synthesis of a Novel Donor Unit for Organic Light-Emitting Materials: 10-octyl-3,7-Di(thiophen-2-yl)-10H-phenothiazine
Chapter 6: Optical/Electronic/Magnetic Materials and Technologies
The Luminescence Properties of Ca3(BO3)2 Doped with Ce3+, Tb3+
Technological Development of 6.5wt%Si Electrical Steel Production
Influence of Nd-Doping on Electronic Structure and Optical Properties of ZnO
Optical Properties of 5,5'-(9,9-dioctyl-9H-fluorene-2,7-diyl)Bis(thiophene-2-carbal dehyde): A Novel Organic Light Emitting Material
Fabrication and Lead Ion Removal Property of Magnetic Hydroxyapatite Composite with Hierarchically Urchin-like Microstructure
Study on Microwave Absorbing of Tourmaline and Dravite/ZnO Complex Powders
Modelisation of Permeability as a Function of Induction and Temperature by the Brillouin's Function for the Formalization of the Magnetothermal Problem
Chapter 7: Building and Construction Research
Comparison Study on Road Performance of Modified Asphalt Mixture for Intermediate Course
Establishment and Research on the Rebound Curve to Detect Pump Concrete Compression Strength with Resiliometer
Finite Element Analysis of Dynamic Splitting Tensile Mechanical Properties of Reinforced Concrete
Flush Rule and Initial Flush Analysis of Cement Concrete Pavement
Mechanism Analysis on Concrete Column's Recovery Strengthening
Study of Bond Behavior between Concrete and Steel Bars Based on New Beam Specimens
Study of Model Tests on Large-Span Tunnel's Damage Caused by Overload with Arch Cover Method
Study on Moment-Curvature Hysteretic Model of Steel-Concrete Composite Box Beam
Resistance of Polymer Dispersion Additive Modified Concrete to Light Liquids Action
Analysis on Bearing Capacity of Retaining Wall with Anchor
Experimental Study on the Mechanical Properties of the Crumb Rubber Concrete Modified by Latex
The Introduction of Micro-Pile in Building Heightening and Transformation
A Study on the Snowdrift Patterns of Gable and Flat Roofs Using a Wind Tunnel
Effect of Co-Doped Steelmaking Slag and Fly Ash on Performance of Permeable Concrete
Experimental Research on Shear of Interface between New and Old Concrete with Bond-In Reinforcement and Practical Calculation
Experimental Study on Ratio of Bending-Compressive Strength of the Crumb Rubber Concrete Modified by Latex
Nonlinear Analysis of Concrete-Filled Steel Tubular Columns under Blast Loading
Study on the Ultimate Bearing Capacity of Concrete Filled Steel Square Tubular Short Column with PBL
A Study on Influence of Shape of Aggregate on Strength and Quality of Concrete for Buildings and Pavements
Influence of Superplasticizer S-3 on the Technological Properties of Concrete Mixtures
Tests Results Strength and Thermophysical Properties of Aerated Concrete Block Wall Samples with the Use of Polyurethane Adhesive
Applicability Study of Peck Formula Applied to Shield Tunneling in the Loess Area
Bearing Performance Test Research of Shallow Arch Circular Concrete Filled Steel Tube Support
Current Status and Development Trend of Assembled Structure in Cold Regions
The Energy Efficiency of Residential Buildings with Light Walling
Highly Filled Building Materials Reduced Flammability
Modern Building Materials and the Concept of "Sustainability Project"
Research on the Influence of Fiber Web to the Axial Compression Performance of EPS Composite Insulation Wallboard
Restrained Shrinkage Behavior of Concrete under Different Environmental Conditions
Risk Evaluation of the Subway Foundation Pit Based on Variable-Weight and Matter-Element Theory
The Implementation of Waste Sawdust in Concrete
Electrochemical Behaviors of Q420 Hot Galvanized Plate in Simulated Concrete Pore Solution
Modernization of Residential Buildings of the 1960s
Shear Strengthening Effects of RC Beams Using Aramid Plate Strip
The Quickly Erected Buildings in Modern Construction
Compound and Engineering Application of Fiber Reinforced Concrete with Low Shrinkage
The Research of Concrete Short Columns Strengthed with Angle Steel
Microstructure and Mechanical Properties of Laminated Mg-Based Composites
The Engineering Application of Carbon Fiber Reinforced Concrete Beam
Modeling of Reliability for Anti-Condensation Wall System in Underground Engineering Based on Markov Process
The "Comfort in all Respects" Principle Implementation by the Example of an Elementary School
Character and Development Analysis of Foam Concrete Cooperating Rice Husk Ash
The Energy-Efficient Heat Insulation Thickness for Systems of Hinged Ventilated Facades
Shield Tunneling Parameters Optimization Based on Dynamic Bayesian Networks
The Historical Characteristics and New Developments of Settling Spaces on Bridges
Chapter 8: Environment-Friendly Materials
Effect of Formamide on the Mechanical Properties of Thermoplastic Protein Films
Mechanistic Study on Adsorption and Oxidation of NO over Activated Carbon
Study on Metal Chelation Adsorption of NO Using Fe(II)EDTA Solution in Power Plant
Impact of Biochar on Water Holding Capacity of Two Chinese Agricultural Soil
Application Research of Slow-Release Fertilizer in Plant Camouflage
Study on CO2 Adsorption of Sepiolite Modified by Silane Coupling
The Full Immersion Test Research of Refractory Weathering Steel
Hydraulic Performance of Olive Stone Filtration Systems
Organobentonites for Controlled Release of Diazinon
Study on the Storage Stability of High Neutralization Degree Phosphate-Bonded No-Bake Sand
Chapter 9: Biomaterials and Bioresearch
A Comparison Study of the Effects of Ultrasonication on the Gelation Behavior between the Silk Fibroin of Domestic and Wild Silkworms
Determination of Luteolin by Fluorescence Spectrometry
Dynamic Models of Cell Growth and its ?-Carotene Synthesis from the Red Yeast Mutant
Extraction Technology and Determination of Total Flavonoid in Magnolia Liliiflora Petals
Fractal Modeling Research in Permeability of Camellia and Bancoul Nut Cakes under Cold-Press
Improving the Yields of Carotene from Red Yeast by Using Ultra High Pressure and its Mutagenic Mechanism
Synthesis of Tung Oil Monoglyceride
Analysis of Key Odor Compounds in Steamed Chinese Mitten Crab (Eriocheir sinensis)
Chemical Constituents Study of Weixian Turnip (Raphanus sativus L.)
Comparison of Volatile Compounds in Raw and Cooked Chinese Mitten Crab Hepatopancreas and Gonads
Effect of Cold-Induced on Quality of Black Carp Fillet Stored at Controlled Freezing-Point
Microstructure Analysis of Xanthoceras Sorbifolia Shell Activated Carbon
Optimization of Microwave Pretreatment without a Reagent of Pineapple Peel
Optimizing Clarification of Pineapple Peel
Preparation and Evaluation of Calcium Alginate/Glycyrrhizic Acid Hydrogel
Preparation of Antioxidant Hydrolysates from Round Scad (Decapterus maruadsi) Protein by Composite Enzymatic Hydrolysis
Purification of Enzymatically Produced Trehalose by Saccharomyces cerevisiae Strains Carrying Compound UV- and NTG-Induced Mutations
The Establish of Four Kinds of Chinese Primary Economic Crab Species Fatty Acid Fingerprints
Effects of Water Temperature on Biochemical Characteristics of Mandarin Fish during Live Transportation
The Effect of Modified Atmosphere Packaging on the Quality of Sturgeon Caviar at 0 degreesC
Characteristic Changes of Protein Occurring in Brine Salting Sturgeon at Different Levels of NaCl
Comparative Analysis of Amino Acid Composition in Antarctic Krill and White Shrimp
Component Analysis, Quality Measurement and Antioxidant Activity of Sambucus williamsii Seed Oil
Dicamba Degradation Using O3/UV Process in Aqueous Solution
Physicochemical and Rheological Properties of Gelatin Extracted from Tilapia (Oreochromis niloticus) Skin and Concentration Effect
Physicochemical Properties of Biodegradable Tilapia Skin Gelatin Film and Gelatin-Polysaccharide Based Composite Films
Plant MicroRNAs Responsive to Fungal Infection
Shortening Fermentation Period of Fermented Sausage by Adding Exogenous Enzymes
Study on Defluorination Effect of Antarctic Krill by Chemical Treatments
The Expression Analysis of WUSCHEL Gene under High and Low Temperature in Tomato Seedling
The Expression Analysis of the YABBY Transcript Factor-SlYABBY2a in the Tomato Seedling under Low Light
Towards Enhanced Bioactivity: Calcium Ion-Doped Polypyrrole
Vacuum Assisted Extraction of Indirubin from Radix isatidis through Orthogonal Test Method
A Bioaerosol Detection IRLidar
Effects of Different Purification Methods on Chicken Feather Keratin
Effect of Different Temperatures on Storage Quality of Fresh-Cut Apples
Finite Element Analysis of Femoral Fracture System
Influence of Operating Parameters on Physicochemical Properties of Fruit Juice Powders Produced by Spray Drying
Chapter 10: Polymer Materials
A Novel Cement Fluid Loss Additive P1402
A Self-Oscillating Polymer Chain with High LCST
Activation Energy of Autonomous Polymer Chains with High LCST
Preparation and Drug Release Behavior of IPN Hydrogel of Polyethylene Glycol and Octane Succinyl Chitosan
The Optimization Plastic Coefficient in AWC Research and Application
Effect of Relative Humidity on the Morphology of Electrospun Gelatin Aqueous Solutions
Melting, Crystallization Behaviors and Mechanical Properties of iPP Nucleated by ? Nucleation Masterbatches
Rheological Properties of all Para-Position Polysulfonamide Spinning Solutions
Simulation of the Flow-Induced Crystallization of Polypropylene Based on Molecular Kinetic Model
Study on Resin Infusion Behavior of the CFRP Integrated Manufacturing Process Based on RFI Process
A Novel Synthesis Process of PPTA by Nitrogen Cooling for Reaction Heat Removal
Crystallization Behavior and Crystal Morphology of PP/POEg Blends
The Kinematic Research in the Manufacture of Rigid Polyurethane Rubber Micro-V Grooves
Influence of Solvent Content on Properties of UHMWPA6 Fibers Prepared by Gel-Spinning Method
Chapter 11: Film Materials
Fabrication of Self-Organized Porous Anodic Alumina Film in Malonic Acid
Effects of Thickness on Resistance Switching Properties of ZnMn2O4 Films Deposited by Magnetron Sputtering
Investigation of Phase Transformation and Optical Properties of TiO2 Thin Films Deposited by Electron Beam Evaporation
Reaction Mechanism of Atomic Layer Deposition of Al on the Si (100) Surface: A Density Functional Theory Study
Effect of Al-Induced Crystallization on Structure of CdZnTe Thin Films Deposited by Radio Frequency Magnetron Sputtering
Influence of Sputtering Power on the Properties of CdS Thin Films Deposited by Magnetron Sputtering
Recent Progress in Gasochromics of Nano-Structured WO3 Film and its Applications
Structural and Optical Properties of (Al, Co) Codoped-ZnO Thin Film
Study of the Capacitive Properties of Strontium Barium Niobate Deposited by Radio Frequency Magnetron Sputtering
Chapter 12: Textile Materials and Technologies
Eco-Friendly Dyeing of Silk Fabric with Sodium Copper Chlorophyll
Fabrication of Twisted Continuous Nanofiber/Cotton Hybrid Yarns
The Exploration of Nickel Iron Fiber Absorbing Fabric
Chapter 12: Textile Materials and Technologies
Analysis on down Coat Fabric
Design Principle and Method of Digital Multicolored Warp Jacquard Fabric
Parameters of High-Density Soft Breathable and Anti-Velvet Fabric Technology
Research on the Ballistic Performance of UD Cloth/3D Fabric Composite Target
Testing of the Dynamic Permeability and Deformation of Airbag Fabrics
Comparative Study between DSC and Two Complementary Performance Evaluation Methods for PCM-Treated Textiles
Chapter 13: Corrosion and Surface Treatment Technology
The Effect of Wear and Corrosion Resistance of Austenitic Stainless Steel on Plasma Carburizing
Study of EMISE Ionic Liquids Inhibitor on the Corrosion Behavior of Steel Rebar by Statistical Methods in Alkaline Chloride Solution
Multiple Regression Corrosion Models and Corrosion Mechanism of High Chromium Cast Iron under Phosphoric Acid Medium Condition
Application of Visual Basic (VB) Language on Stress Corrosion Cracking Test of Materials
Oxidation-Resistance of (Ti,Al,Nb)N Coatings Prepared by Arc Ion Plating
Interaction Concrete with Acidic Fluids
Application of Origin in Material Corrosion Experiment
Effect of New Corrosion Inhibitor on Electrochemical Behavior of Prestressed Steel Wire in Simulated Concrete Pore Solution
Impact of Local Concrete Crack on the Prestressed Steel Stress Corrosion Cracking
Industrial Application of Pb-Ag-Ca Anode with Surface Passivation for Zinc Electrowinning
Investigation on Electrochemistry Behavior of Fe-Cr-Ni Alloy in Caustic Solution
Research on the Nitriding Effect of Ta-10W with Change of Process Parameters
The Micro-Fabrication of Multidimensional Structure of Silicon by Selection Corrosion
Process Design of Strengthening and Toughening Treatment for 65Mn Steel by Powder RE-Boronizing Method under Low Temperature
Chapter 14: Materials Mechanical Behavior and Fracture
Analysis on Fracture Mechanism of T92 Steel under High Temperature Multiaxial Creep
Ballistic Resistance of AA5083-H116 Aluminum Plates against Conical-Nose Steel Projectiles Impact
Piston Contact Stress Analysis and Simulation
The Damage Analysis of Composite Laminate under the Action of Low Speed Impact and Static Pressure Mark
Development and Change of Compressive Strength for Class G Oil Well Cement under High Temperature
Method for Determining the Plastic Properties of Metallic Materials by Instrumented Indentation with Dual Pyramidal Indenters
Study on Flow Mechanism of Gas Injection in Porous Carbonate Core
Effect of True Strain on Processing Maps for Processed Ni-Based Superalloy below ??-Transus Temperature
Effect of Strain on Microstructures and Mechanical Properties of Warmly Deformed SCRAM Steel for Fusion Application
Influence of Carbon on Mechanical Behavior of Fe-Mn-C System Alloys
Multiscale Simulation of Crack Propagation Based on Molecular Dynamics
Numerical Simulation Study on High-Cycle Fatigue Damage for Metals
Evaluation of Mechanical Properties of Hastelloy C-276 Weld by Small Punch Test
Constitutive Modeling for Superplastic Flow Behavior of H62 Alloy
Correlation Degree Analysis on Temperature and Operating Pressure to Stress Corrosion Cracking Susceptibility
Experimental Study on Shot Peening to Improve Diaphragm Spring Fatigue Life of Automobile Clutch
Prediction of Flow Stress for Superplastic Tension Deformation
Quantitative Analysis of Instability for Superplastic Tension
Theoretical Deduction of Constitutive Equations with Variational Parameters during Superplastic Tension
Influence of Grain Size and Lamellar Spacing on the Fatigue Crack Propagation in ?-TiAl Alloy
Study on the Microstructure and Fracture Mechanism of Stable ? Phase Containing Tial Alloy
The Fatigue Behavior of Carbon Fiber-Reinforced Composite T300/Epoxy under Tension-Tension and Bending Fatigue Loading
Research on the Relationships between Plastic Viscosity of Picking Liquids and its Tack Value
Texture Evolution of Commercially Pure Copper during Ultra-Thin Strip Rolling
Regularity of Decreasing Strength Limit at the Time of Concrete's Freeze-Thaw Cycling
The Preparation and Tribological Properties of Graphite Fluoride
Nonlinear Model and Numerical Solutions of Large Deformation of Functionally Graded Conical Shell
Calculating Fatigue Life of Helicopter Composite Blades Based on the Residual Strength Theory
Aircraft Composite Structures Fatigue Durability Test Method
The Preparation and Performance Study of Thermal Insulating Materials with Diatomite
Mechanical Response of Ping-Pong Racket to Different Hyperelastic Surface Materials
Research on Grind-Hardening Process through Integration of Physical Experiments and Dynamic Simulation
Chapter 15: Surface Engineering / Coatings Technology
Hydrophobic Coating on Silicon Wafer by Use of Industrial Coating-Bar Process in Atmosphere Parameter
Slip Length Measurement of Water Flow on Graphite Surface Using Atomic Force Microscope
The Influences of Additives and Heat Treatment on the Properties of Electroless Plating Ni-W-Mo-P Alloy on the Aluminum
Research and Development on the Antiaging Polymer Coatings
Preparation and Characterization Composite Ceramic Coating Doped with ZrO2 Particles on TC4 by MAO
Preparation and Characterization of Al(OH)3 Coated CaF2 Composite Powder
Preparation of Pd Composite Membrane and its Surface Morphological Changes after Elevating Temperature in Different Atmoshphere
Research on the Microstructure and Properties of Coating on Galvannealed High Strength IF Steel
Preparation of PAI Composite Coatings and its Tribological Behaviors
New Technology of Electroless Silver Plating on Fly Ash Cenospheres with Thermo-Alkaline Activation
Preparation of Superhydrophobic Surfaces with Different Degrees of Oleophobicity
Progress in Thermal Barrier Coatings for Gas Turbine Engines
FE Modeling of Stress Distribution in MAO Coating on TC4 Substrate under Thermal Shock Cyclic Loading
Investigation of Durability T = f (vc) in Turning of the AISI 304 Austenitic Stainless Steel Using the CNMG 120408 Coated Carbide Insert
Research on Wear Characteristics of CVD Composite Coated Tool in Natural Marble Cutting
Densification Behavior and Microstructure Evolution of Laser Surface Melting Processed Silicon-Containing Micro Arc Oxidation Coating
Influence of Additive on Morphology and Nucleation Mechanism for Zn-Electrodeposition
Preparation and Antimicrobial Properties of Surface Antibacterial Layer of Aluminum
Chapter 16: Forming Technologies
Effect of Drawing Processes on Wire Breaking in Steel Wire Production
Effects of Parameters on Fine Blanking of Steel Synchronizer Ring Teeth
Runner Balance Design of Soap Box Compounding Cavity Based on Moldflow
Study on Deformation Law of Drum-Shaped Blank and Collapse Defect in Rolling Process
Study on Spring-Back of CU11000 Clad AL1050 Sheets
The Application and Research on Manufacturing Technology of the Heavy Forging
The Application of Steady-State Thermal Expansion of the Rolls in Thickness Setup Model for HSM
The Optimization of Thickness Model Adaption in Hot Strip Mill
Research on Tension and Correction of Filming Steel Strip on Hydrosol Salivation Machine
Experimental Study on Three-Dimensional Flexible Stretch Bending Formability for Complex Cross-Sectional Profiles of TWB
The Effect of Screw Speed on Extrusion Quality of the Single-Screw Extruder
Numerical and Experimental Investigation on Hot Stamping of Ultra-High Strength Steel
Coupled Thermo-Mechanical FEM Simulation of Multi-Pass Vertical-Horizontal Rolling Process
Development of Environmentally Friendly Binder in Extrusion Molding
Effect of Mid-Roll Shift on the Strip Flatness for CVC 6-H Mill
Effect of Steel Strip-Feeding Process on Solidification Structure
Metal Average Deformation Velocity and Forward Slip Model for Longitudinal Profiled Plate Rolling Process
Optimization Design of Evaporator Tube Plate Mold Based on PDX
Stress-Strain Analysis of the Sun Shaft in Cross-Wedge-Rolling
Study of Isothermal Split-Die Precision Forging Process of High-Strength Aluminum Alloy Complex-Shape Forgings
Study of Submacroscopic Melting of Polymer in Single Screw Extrusion - Physical Model of Polymer Granule Melting
Study on the Influence of Thickness and Width on the Post-Buckling Deformation of Cold-Rolled Strip
Technique of Extrusion Die Tolerance Analysis Based on CAT
The Influences on Microstructure and Segregation of the Jumbo Slab Ingot by Different Cooling Speed
On-Line Measurement of Rheological Properties of LDPE, HDPE and LDPE/MICA Systems in Single-Screw Extrusion
Study on Convergence, Calculation Speed and Precision of Flatness Analysis Method for Cold Rolling Strip
Causes and Remedies for some Physical Defects in Rotary Swaged Products
Experimental Investigation on Rotary Punching by the Compression of Polyurethane Pad
Influence of Rotary Forging Process on Microstructure and Properties of Niobium-Titanium Alloy
Key Technical Analysis of Roll Forming for High Strength Rectangular Tube
Numerical Simulation of Polyurethane Pad Punching Process
Preliminary Investigations on Preparation of Cu-Al Bi-Metallic Tubes Using Swaging-Diffusion Method
Research Status of Sheet Metal Blanking Processes
Technology of Finite Element Analysis for Roll Forming Process
Analysis of Metal Deformed Flow under Adhesive Friction by Ring Upsetting
Investigation on the Effect of Liquid Hammer Geometry to the Pressure Distribution of Innovative Hybrid Impact Hydroforming
Large Container End Plate Stretch Forming Technology
Oval Aluminum Tube Extrusion Process Simulation with Two-Hole Dies
Research on Finite Element Simulation of the Big Size Spring Steel in Continuous Grooveless Rolling
The Ring's Axial Deformation Control Method of Vertical Hot Ring Rolling Process
Problems of Cold-Bent Notched C-Shaped Profile Members
Study on Simulation and Experiment of Micro Sheet Metal Forming
The Pressed Products on the Basis of Gypsum
Effect of DROF Process on the Temperature Field and Roll Force
Simulation to the Temperature Field for Continuous Casting Billet during Direct Rolling of Free-Heating
The Strain Analysis of Plate Cross Wedge Rolling of Spiral Shaft Parts
Research on a Kind of no Punch Hollow Part Hydraulic Pressure Expand Mould
Manufacturing Process for Bush Type Bearing Metal Using Centrifugal Casting
Chapter 17: Material Machining
Efficiency Analysis on the Synthetically De-Icing Technology Combining Thermal Water-Jet Cutting with Mechanical Milling
Study on Cutting Performance of the Alumina Based Nanocomposite Ceramic Tool
TC4 Titanium Alloy Surface Crack Detection and Analysis
A Processing Predictive Model of Ultrasonic Vibration Grinding Assisted Electric Discharge Machining Based on Support Vector Machines
Design and Tuning of the Ultrasonic Wide-Blade Horn for Joining and Cutting Non-Woven Fabrics
Study on Virtual Machining Process of Peripheral Milling of Thin-Walled Workpiece
The Evaluation of the up and down Milling Based on its Chip
Experimental Study on Effects of Feed per Tooth on Shear Angle and Friction Angle in Orthogonal Milling of Titanium Alloy
Experimental Study on Electrochemical Drilling of Micro Holes with High Aspect Ratio
Chapter 17: Material Machining
Study on Material Removal Mechanisms of Surface Fatigue Layer Based on Handheld High Velocity Arc Machining
Experimental Study on the Optimization of Ti1023 Milling Parameters
Research and Development of Ultrasonic CNC Cutting Path Generation System for Nomex Composite Materials
Optimization of Electric Discharge Machining Parameters of Al-7%Si-4%Mg with 20% of Red Mud Metal Matrix Composites
Simulation of Residual Stress in Cold Working of Flat Spiral Springs
Polishing Experiment Study of the Elastic Coated Abrasives
Machinability Assessment of Titanium Alloy Ti-6Al-4V for Biomedical Applications
Study on Key Technologies of Handheld High Velocity Arc Machining Equipment
The Cooling Characteristics of Quenching Mist under Different Conditions
Chapter 18: Welding and Joining
Microstructure and Bending Property of Welding Joint Prepared by 5356 Welding Wire Added Sc, Zr and Er
Study on the Thermal Expansion Displacement during Spot Welding Depending on the Multi-Physical Coupling Finite Element Model
Research on the Laser Welding Technology of LF21
Study of End Cracking during One-Sided Submerged Arc Welding with Flux-Copper Backing
Arc Characteristics and Droplet Transfer Analysis of Disconnect Impulse Arc Welding for Repairing Surface Default of Metal Parts
Influence of Heat Treatment on Microhardness and Microstructure of the Joining Interface for Ti-24Al-15Nb-1.5Mo/TC11
Microstructure and Properties of Mg/Al Dissimilar Joints by GTAW with Al-Si Filler Wire
Research on Surfacing Welding and Machining Process of Large Valve Corrosion Resistant Layer
The Effect of Joule Heat on Coupling Temperature Field of Friction Stir Welding
The Microstructure and Properties of TIG Welded Joint of AZ31B/Cu Dissimilar Metal
Ultrasonic Horn Design and Weldability in Thin Ni Plates Welding
Experimental Research of Activating Fluxes in A-TIG Welding of 5052 Aluminum Alloy
Relationship between the Microstructure of the Welded Steel Plates and the Efficiency of Vibration Stress Relief
Weld-Bonded Joints Properties with Advanced High Strength Steel DP600
Sealing of Sapphire Infrared Windows by Ultrasonic Interfacial Deposition Soldering
The Implementation of Martensitic Heat-Resistant Steel Welding Performance Analysis and Process
Characteristics Evaluation of Weld and Deposited Metal Zones in the Case of Welded with Inconel 718 Filler Metal to Cast Steel for Piston Crown Material
Performance of Cohesive Zone Models for Brittle and Ductile Adhesives
Improvement of the Wear Resistance of A6061 Plate by Resistance Seam Welding with High Carbon Iron Alloy Powders
Welding Spark Parameters Determination for Cyclone Removal Calculation
Chapter 19: Micro-Fabrication Techniques
Experimental Research of Hydrogenous Fuel Production from Biogas for Usage in Fuel Cells of Autonomous Power Supply Systems
High-Speed, High-Precision Magnetic/Piezoelectric Hybrid Drive Actuator for Micro Electrical Discharge Machining
Influence of Grain Size and Grain Boundary of Workpiece on Micro EDM
Model Structure and Simulation Analysis of a Novel Magetic Suspension Spindle Apparatus for Micro EDM
Study on the Effect of Tool Polarity and Tool Rotation during EDM of Non-Conductive Ceramics
The Periodical Translocation Gear-Grinding Technique to Improve the Indexing Accuracy of Ultra-Precision Gears
Experimental Investigation of Fabrication of Double Tapered Hole Array by Using Electroforming and Mask Electrochemical Machining
Exploration of Hyperfine Micro-Machining Limit
Microfluidic Chips with Micro-Pillar Array for Cell Capture
Thermal Accumulation in Metal Micro-Parts Fabricated by Micro Droplet Deposition Manufacturing Technique
Chapter 20: Laser Processing Technology
Contrast Prediction for Laser Direct Part Marked Data Matrix Symbols on Titanium Alloy Substrates
Study of Effect of Laser Marking Data Matrix Symbols on Titanium Alloy Sheets Using Nd:YAG Laser
Experimental Research on Affect of Water Jet to Laser Compound Processing of Crystalline Silicon
Influence of Laser Input Current and Water Jet to Etching Amount of Polycrystalline Si Wafer
Thin Wall Formed by Multi-Layer Overlapping Laser Cladding Forming
Laser-Energy-Density Dependent Formation of Al2O3-TiC Coating by Laser-Assisted Combustion
Directly Manufacturing Mouse Mold by Plasma Deposition Manufacturing
SLC Technologies for Ferroalloy Part Surface Modification
Laser Cladding of Co-Based Alloy on 316 Stainless Steel
Formation of TiC0.3N0.7/TiN Composite Film on Ti-6Al-4V Alloy by YAG Laser Irradiation
Chapter 21: Machining Tools, Testing Technologies and Error Measurement
New Method of Plane to Plane Parallelism Error Measurement Based on Flatness Plane
Modeling and Identification of Geometric Error Based on Screw Theory
Measurement Uncertainty Evaluation of a Virtual Instrument for Thickness Monitoring of Brush-Plated Coating
Efficient Genetic Algorithms for Measurement of Flatness Error and Development of Flatness Plane Based on Minimum Zone Method
Simulation Analysis and Experimental Study of Initial Permeability Testing Technology
The Study of Closed-Loop Position Control System Based on CNC Processing
Chapter 22: Modeling, Analysis and Simulation of Processes
Influences of Edge Rolling on Unsteady Deformation of Metal in Roughing Stage of Continuous Hot Strip Rolling
Mathematical Model of Topology Modification of Tooth Surface and Error Characteristics
Modeling for HAGC Press System of Rolling Mill
Computational Solution of Contact Problems with Unilateral Constraints and Friction by Step-by-Step Analysis
Simulation and Analysis of Material Horizontal Vibration Conveying Based on DEM
The Fiber Orientation Angle Determination for a Composite Anisotropic Solid Rod in Pultrusion
Application of Two Damage Identification Methods Based on Sensitivity Analysis in Steel Structure
Prediction and Control of Hot Pressing Rebound of Fan Blade Based on Thermal Mechanical Coupling Simulation
Analysis of an Orbital Grinding System for Grinding Crankshafts for Large Ship Engines
Influence of Cold-Rolled Strip Temperature on the Interference Fit of Entire Roller Embedded Shapemeter Roll
Numerical Simulation and Process Analysis for Injection Forming about the Thin-Wall Conical Centrifugal Disc
Numerical Simulation of Liner Curvature Radius on Formation of LEFP
Study on Transverse Uniformity of Phase Transformation for Hot-Rolled Strip on Run-out-Table
Finite Element Modelling of Copper by Equal Channel Angular Extrusion
Hot-Rolling Batch Planning Problem of Round Bar with Roller Capacity
Modeling and Virtual Simulation of Hard Surface Milling and Forming Process Using Advanced CAE Systems
The Inverse Prediction for Profile Extrusion Die Based on the Finite Element Method
A Numerical Approach for Simulating a Self-Contacted Elastic Rod
A Schwarz Alternating Algorithm Using Elliptical Arc Artificial Boundary for Exterior Problems with a Concave Angle
Material Removal Model and Experimental Analysis in the CMP of Si-Based Fiber Array
Research on FEM Simulation of Splitting Spinning Progress about 2024 Aluminum Alloy
Finite Element Simulation of Seven-Hole Propellant Extrusion and the Optimization of Die Compression Ratio
Modeling of Multilayered Sheets for Thermoforming Applications
Numerical Investigation on Angle of Repose of Cylindrical Particles
Chapter 23: Thermal Engineering Theory and Applications
Diffusion and Oxidation Wear of Superhard Cutting Tool Based on Thermodynamics Enthalpy
Stress Modeling of Large Cylindrical Ingot Heating Process
Study of Crack Length Measurement and Crack Tip Plastic Zone Determination by Infrared Thermography
The New Model of Laminar Cooling System and its Fieldbus System
Experimental Research on Crock-Type Metal Fibre Burner of Chinese Cooking Appliance
Cooling Rate, Microstructure and Property Studied of Spray Cooling of Heavy Shell Ring Rolling
The Transient Temperature Field Simulation and Analysis of Machinery's Components by ABAQUS
Numerical Simulation Analysis of Rail Head for U75V in the Process of Spray Cooling Temperature Field
Study on Energy Saving Model of Air Condition for Subway Station
Effect of Normal Pressure on the Coupled Temperature Field of Pin-Disc in Electromagnetic Environment
Experimental Study on Film Cooling Efficiency of Flat Plate through Infrared Thermography Technique
ISO 11439 I-Cylinder Bonfire Test and Safety Evaluation
Modelisation of Calorific Capacity by the Debye and Brillouin Functions for the Formalization of the Magnetothermal Problem
Energy Consumption Analysis of Thermal Regeneration of Activated Cokes Loaded with SO2
The Influence from the Return Water Temperature of Condenser on the Cooling Capacity and Power Consumption of the Cold-Water Screw Unit Used on Cold Storage
Application of Thermal Contact Resistance in Simulation of Heat Dissipation by CPU Heat Sinks Based on ANSYS
Heat Transfer Capacity of Composite Cooling System for Automobile Lithium-Ion Battery with Heat Pipe and Phase Change Materials
The Influence of the Position of the Steel Element to Heat Flow in the Wall of the Industrial Freezer
Effect of Model Structure on Thermal Conductivity of Sandwich Composites
Thermal Insulative Performance of Bamboo Leaf Aerogel Opacified Using Activated Carbon Compared with Carbon Black
The Influence of Induction Heating to Remelting Temperature Radial Distribution
Theoretical Analysis and Experimental Study on Heat-Transfer in Cryogenic Gas Atomization Jet Cooling Nickel-Base Alloy
Thermal Stress Distribution Simulation Analysis for Disc Brake of Heavy Vehicles
Thermomechanical Coupled Analysis of Multidisc Friction Pairs in Hydro-Viscous Drive
Thermal Structure Coupling Analysis of Universal Mill's Horizontal Roller Ring Based on ANSYS
The Research of the Effect of Velocity on Coupled Temperature Filed in Pin-on-Ring Friction Pair under Electromagnetic Field
Research on Design and Principles of New Regenerant for Restoring Performance of Aged Pitch
Chapter 24: Mineral and Soil Mining and Processing
Hydraulic Fracturing Technology Design in Natural Fracture Reservoirs
Study on Floor Pressure Relief Law of Simultaneous Mining Working Faces in close Distance Seam Group of Dongsheng Coalfield
Study on the Abutment Pressure and Advanced Support of Driving Roadway along Goaf of Isolated Mining Face
Experimental Study of Fill Body Non-Uniformity for Cut-and-Fill Mining
Simulation and Analysis of Anti-Explosion Capability for Coal Mine Refuge Chamber
The Study of Remaining Oil Distribution in Tazhong 4 Oilfield's TZ402CIII Oil Group
Study of the Trellis Support of Working Face Roadway in Impact Coal Seam
Study on the Mining Induced Stress of Hard Surrounding Rock under Dynamic Pressure
Plugging Agent Type Selecting Methods for Channeling Reservoir
Study on Deep Reduction of Oolitic Hematite Assisted with Microwave Radiation
Study on Variation Regular Pattern of Development Indexes in Beierdong Block after Layer Recombination
Evaluation on Shale Gas Potential in the Sheling Group Yitong Basin
Finite Element Analysis and Optimization Design on Single Screw Pump of Offshore Petroleum Well Cementing LADS Device
The Characterization of the Rock Microscopic Pore Structure before and after Strong Base ASP Flooding
Discussion on Support Problems on Soft Rock Roadway
Research on Rock Mechanics Characteristics of Mud Sandstone NanTun Formation of HaiLaEr Oilfield
An Experimental Study on the Mechanical Properties of Cemented Rock-Tailings Fill
Investigation on the Sintering Properties of Mullite Al2O3-70%
Status Analysis of the Frozen Soil's Dynamics Parameter Study
Studies about the Drained Creep Characteristic of Silt Soil on k0 Consolidation
Characterization and Application of Super Clean Coal
Study on Extractiing of Heme from Tilapias Blood by Enzymatic Method
Chapter 1: Alloys and Non-Ferrous Materials
Influence of Overburning on Microstructure and Property of 2024 Aluminum Alloy
Effects of Nb Element on Mircostructure, Thermal Conductivity and Melting Point of Cu-Ni-Nb Alloy Prepared by Vacuum Arc-Melting
Dissolution of Alumina in Molten Aluminum Electrolyte Based on Perforated Anode
Surface Characterization and Machinability of Zirconium Alloys in View of Jewelry Application
Hot Deformation Behavior and Microstructural Evolution of Al-Zn-Mg-Cu Alloy with Different Starting Structures
Discussion on Technologies of Preparation of Foam Aluminum Metallic Material by Infiltration Casting Method
Effect of Indium on Precipitation Kinetics of an Al8Si0.4Mg Cast Alloy
Influence of MgO on Calcium Aluminate Slag System with Lower Calcium
Processing Map of Mg-13Al-3Ca-3Zn-1Nd-0.2Mn Magnesium Alloy
Structure and Dynamical Relaxation in Undercooled Liquid of Cu50Co50 with Miscible Gap
The Effect of Mixed RE Elements on Microstructure and Mechanical Properties of Die-Cast AZ91D Alloy
Use of Strain Energy Density W and Qo as Quality Indices to Study the Effect of Hipping on Cast Aluminium Alloy 354 under Different Aging Conditions
Strain Rate Sensitivity and Adiabatic Shear Deformation of an Advanced Al-Mg Alloy
Comparison of Mechanical Properties of 357-T6 Aluminum Alloy Aast under Gravity Permanent Casting and Low Pressure Die Casting
Diffusion Bonding of Commercially Pure Titanium to Q235B Using Copper as Interlayer
Mechanical Properties of A356 Aluminum Cast Alloy Shaped by Permanent Mold Casting
Superplasticity Mg Alloy Fabricated by Friction Stir Processing
The Technique Study on Silicon Brass Recrystallization Annealing Aided by Electric Pulse Treatment
Wettability, Surface Tension and Work of Adhesion of Cu-Ti Alloys on Yttria Partially-Stabilized Zirconia at 1273K
Combustion Synthesis Sintering of Ni-Al Powder Alloys
Influence of High Magnetic Field on ?-a Phase Transformation in TC4 Titanium Alloy
Low Temperature Superplasticity of 5083 Aluminum Alloy
Prediction of TCP Phases in Nickel-Base Superalloys
Chapter 2: Iron and Steel
Bake Hardening Properties of Ultra-Rapid Annealed Ultra-Low Carbon Bake Hardening Steel
Study on Internal Quality of Billets for 20CrMnTiH Steel
Study on Microstructure and Properties of X80 Pipeline Steel
Study on Microstructure and Property in Heat-Affected Zone of X80 Pipeline Steel
Thermal Simulation Study of CGHAZ Austenite Grain Growth Behavior of X80 Pipeline Steel
Research on Mechanics Performance of TP304H Austenitic Stainless Steel in the Process of Aging at High Temperature
Experimental Study on Hydrogen Selective-Reduction of Niobium Containing Iron Ore Powder
Research on the Corrosive Factors of Q235 Steel in Simulate Ammonium Sulfate Solution of Ammonia Desulphurization
Microstructure and Mechanical Property Analyses of Brazing Titanium and Low Carbon Steel Using Silver-Based Brazing Alloy
Research and Application of Basic Tundish Covering Flux
Research of Producing Reduction Steel Powder from GCr15 Steel Scrap
The Research Status of Titanium Clad Steel
Oxidation Behavior of T91 Steel in Water Vapor Atmosphere at 750 degreesC
Research on the Size Distribution of Intragranular and Boundary Carbides of T91 Steel after Creep
Analysis on Alloying Elements of Selective Oxidation of TRIP Steel
High Temperature Oxidation Behavior of SUS310S Austenitic Stainless Steel
Preparation and Characterization of Iron-Oxide-Coated-Zeolite Adsorbent
Experimental Study on Refractory Weathering Steel Cold-Rolled Sheets Recrystallization Annealing
Analysis of Boride Phase Composition in High Boron Alloyed Stainless Steel Containing Titanium
Chapter 3: Composites
Synthesis of Sulfur-Doped Graphene from Sulfonated Polystyrene
The Properties of the Sodium Silicate Binder Composition Based on Quartzite Deposits
Study on Microstructure of Continuous Cf/Al Composite Material Prepared by Hot Pressing Diffusion Method
Change Regulation of Hardness of Target around Crater Penetrated by Wf/Zr-Based Amorphous Matrix Composite Projectile
Adsorption of Cu(II) from Aqueous Solution onto Na-Bentonite/Poly AMPS/AA/AM Composite
Effects of Fillers on the Dynamic Properties of a High Performance Elastomer at Varying Strain Amplitude
Morphology, Thermal, Dynamic Mechanical and Mechanical Properties of Long Glass Fiber Reinforced Thermoplastic Polyurethane Elastomers and Polyvinyl Chloride Composites
Investigation of Surface Roughness after Turning of One Kind of the Bio-Material with Thermoplastic Matrix and Natural Fibers
Microstructure and Tribological Properties of Cu-Fe Based Braking Materials
Preparation and Wear Performance of Novel Graphite/Copper Alloy-Matrix Self-Lubricating Composite Materials
The Fabrication of High Silicon-Aluminum Composites and the Thermal Conductivity
Study on Properties of Modified Porous Starch/ Natural Rubber Composite
The Influence of SiO2 on Properties of Cellulose Aerogel
Design, Fabrication and Characterization of Fused Silica-Based Composites with an LTCC-Derived FSS
Effect of Cycle Index on the Microstructural Evolution of Alumina Particles Reinforced Aluminum Composites Treated by Cryogenic Treatment
Influence of Cooling Speed on the Microstructure of Particles Reinforced 7055Al Composites Subject to Regulatory Cryogenic Treatment
Preparation and Characterization of Resin-Derived Carbon Foams Containing Hollow Microspheres
A Study of Polyurethane Rubber Composite Modified Asphalt Mixture
Fluorescence Properties of Electrospun Bio-Based Polyamide/Eu(TTA)3phen Composite Fibers
Preparation of Poly(m-toluidine)/Montmorillonite Composites and its Thermal Stability
Effect of Diffusion Annealing on Defects Reduction of 6.5wt% High Silicon Steel Composite Plate after Hot Deformation
Investigation of Heat Treatment's Influence on the Preparation of High Silicon Steel Composite Sheet
Iron Loss Measurement on 6.5wt%Si Composite Plate Prepared by Clad Casting and Conventional Rolling Processes
Production of 6.5wt%Si Composite Thin Sheet by Cold Rolling Process
Study on Heating Treatment of 45steel/60Si2CrA Multi-Layer Composite Armor Plate
Study on Mechanical Property of 1Cr17/9Cr18MoV Multilayer Composite Armor Plate
Study on Superabsorbent Material in Thermal Infrared Camouflage
Chapter 4: Micro/Nano Materials and Technologies
A Hydrogen Peroxide Electrochemical Sensor Based on Co-Doped Fe3O4 Nanoparticles
Effect of Collect Distance on the Fabrication of Aligned Nanofiber by Parallel Electrode
Research Profiling of Carbon Nanotubes from 2000 to 2013
The Raman Properties of Ag Doped ZnO Microrods Synthesized by Chemical Vapour Deposition
Large-Scale Synthesis of Water-Dissoluble Nanorods
Fabrication of PLA Nanoporous Fibers by DMF/CF Mixed Solvent via Electrospinning
Fabrication of PEG Hydrogel and PDMS Microstructures by a Simple UV Curing Process for Nanobio-Chip Applications
Performance of Electrospun Nanofibres on Adsorbing Gaseous Aromatic Compounds
Properties of Metallic Materials after Surface Self Nano-Crystallization
Simulation of Electric Field for Carbon Nanotube Assembly by Dielectrophoresis
The Influence of Zn/Zr Ratios on CuO-ZnO-ZrO2 Catalysts for Methanol Synthesis from CO2 Hydrogenation
Modification of the Fine - Aggregate Concrete by High Disperse Silica Fume and Carbon Nanoparticles Containing Modifiers
Preparation and Mechanics Properties of the EP/TiO2 Nanocomposites
Progress of Studies on Fabrication of TiO2 Nanotube Arrays on Ti or Ti Alloys by Anodization
Study on Preparation and Property of Regenerated Liquid Reactive Dyes Regenerated Magenta
The Effect of Different Ratio in Carbon Aerogel on Pore Structure in Ambient Dry
Influence of Softener on Rheological Characteristics of the Nanostructured Modifier
Insertion versus Growth of Magnetic Nanoparticles in MgB2 Superconducting Composites
High Density Dislocation and Magnetoplasticity in Nano-Sized Alumina Reinforced 7055Al Composites Subject to High Magnetic Field
Effect of Carbon Nanotubes on Microstructure of Multiphase Composite Al2O3 Ceramics
Quasicontinuum Analysis of Dislocation Propagation during Nanocontact
Prepare and Formaldehyde Sensing Properties of Hollow Nanofibers In2O3
Polarization Dependent Nonlinear Absorption in Au Nanowire Array
Research on Surface Modification of Nano-TiO2
Enhanced Mechanical Performance of Electrospun Graphene/Polyacrylonitrile (PAN) Composite Microfibrous Yarns via Post-Processing
Influence of Complexing Agent on the Structure and Properties of Electrodeposited Fe-Co Alloy Nanowires
Chapter 5: Ceramics
Dispersion Stability of Hydroxyapatite-Calcium Phosphate Glass Ceramic-Tertiary Butyl Alcohol System
Microwave Dielectric Properties of Low-Fired Nd2Ti2SiO9 Ceramics with BaCu (B2O5) Addition
Effects of Cr2O3 Addition on Mechanical and Electrical Properties of Alumina Ceramic
Effect of Copper Micro-Scale Excess on the Dielectric Properties of CaCu3Ti4O12 Ceramics Prepared via Tape Casting
Effect of H3BO3 Additive and Forming Pressure on Microwave Dielectric Properties of 0.95MgTiO3-0.05CaTiO3
Sintering Behavior of Lead Oxide Ceramic Prepared by Microwave Sintering
Research and Transformation of Rotary Surface Discharge Machining Equipment of Engineering Ceramic
Effect of Tb4O7 Doping on Wear Resistance of High-Alumina Ceramic
Low-Temperature-Tunnel of High-Alumina Ceramics with Good Wear Resistance
Preparation of the System of MgO-CaO-SiO2-Al2O3-Y2O3Wear-Resistant Alumina Ceramics
Study of Nonlinear Current-Voltage Characteristic of Semiconductor Ceramic by the Method of Tilted Energy Band
The Ways to the Main Problems in the Application of Low Temperature Co-Fired Ceramics Technology (LTCC)
Study on the Crystal Bonding Mechanism of Al2O3-ZrO2 Ceramic Composite
Effect of Calcite Content on Firing Characteristics and its Sintering Properties of Nixing Pottery
Analysis of Pop-In Phenomenon in the Process of Ceramic Materials Instrumented Indentation
Chapter 6: Optical/Electronic/Magnetic Materials and Technologies
A Life Prediction Model for LEDs Lamps Based on the Thermal Life Theory
Characteristics Research of Gallium Arsenide Solar Cells under Femtosecond Laser Illumination
Research on the Mechanism and Model of Contact Resistance
Test Systems for Life of LED Light Based on Junction Temperature
The Modification of Anatase TiO2 (001) Surface by N or S Atom: A DFT Investigation
Effect of Temperature on LiMn2O4 Prepared by Molten-Salt Combustion Synthesis
Electrochemical Title Performance of LiMn2O4 Synthesized by Flameless Solution Combustion with Acetate System
Carrier Injection in High Gain GaAs Photoconductive Semiconductor Switches
Modeling of the Stress-Dependent Hysteretic Dynamics of Ferroelectric Materials
Synthesis, Characterization and Photophysical Properties of a New CuI Complexe Contain Bis[2-(diphenylphosphino)phenyl] ether and 7,10-Dimethyl Pyrazino [2,3-f][1,10]phenanthroline
Research on Bonded NdFeB Arc-Magnets
Electron Avalanche Domains in High Gain Semi-Insulating GaAs Photoconductive Semiconductor Switches
Manufacture Technology for Large Lightweight Optical Materials
A PbS/ITO/Glass Based Photoelectrochemical Cell with a Sponge-Like Surface Structure
Photoionization in GaAs Photoconductive Semiconductor Switches
Research and Implementation on Methods of Evaluating Lifetime of LED Light Source for LED Lighting System
Synthesis of a Novel Donor Unit for Organic Light-Emitting Materials: 10-octyl-3,7-Di(thiophen-2-yl)-10H-phenothiazine
Chapter 6: Optical/Electronic/Magnetic Materials and Technologies
The Luminescence Properties of Ca3(BO3)2 Doped with Ce3+, Tb3+
Technological Development of 6.5wt%Si Electrical Steel Production
Influence of Nd-Doping on Electronic Structure and Optical Properties of ZnO
Optical Properties of 5,5'-(9,9-dioctyl-9H-fluorene-2,7-diyl)Bis(thiophene-2-carbal dehyde): A Novel Organic Light Emitting Material
Fabrication and Lead Ion Removal Property of Magnetic Hydroxyapatite Composite with Hierarchically Urchin-like Microstructure
Study on Microwave Absorbing of Tourmaline and Dravite/ZnO Complex Powders
Modelisation of Permeability as a Function of Induction and Temperature by the Brillouin's Function for the Formalization of the Magnetothermal Problem
Chapter 7: Building and Construction Research
Comparison Study on Road Performance of Modified Asphalt Mixture for Intermediate Course
Establishment and Research on the Rebound Curve to Detect Pump Concrete Compression Strength with Resiliometer
Finite Element Analysis of Dynamic Splitting Tensile Mechanical Properties of Reinforced Concrete
Flush Rule and Initial Flush Analysis of Cement Concrete Pavement
Mechanism Analysis on Concrete Column's Recovery Strengthening
Study of Bond Behavior between Concrete and Steel Bars Based on New Beam Specimens
Study of Model Tests on Large-Span Tunnel's Damage Caused by Overload with Arch Cover Method
Study on Moment-Curvature Hysteretic Model of Steel-Concrete Composite Box Beam
Resistance of Polymer Dispersion Additive Modified Concrete to Light Liquids Action
Analysis on Bearing Capacity of Retaining Wall with Anchor
Experimental Study on the Mechanical Properties of the Crumb Rubber Concrete Modified by Latex
The Introduction of Micro-Pile in Building Heightening and Transformation
A Study on the Snowdrift Patterns of Gable and Flat Roofs Using a Wind Tunnel
Effect of Co-Doped Steelmaking Slag and Fly Ash on Performance of Permeable Concrete
Experimental Research on Shear of Interface between New and Old Concrete with Bond-In Reinforcement and Practical Calculation
Experimental Study on Ratio of Bending-Compressive Strength of the Crumb Rubber Concrete Modified by Latex
Nonlinear Analysis of Concrete-Filled Steel Tubular Columns under Blast Loading
Study on the Ultimate Bearing Capacity of Concrete Filled Steel Square Tubular Short Column with PBL
A Study on Influence of Shape of Aggregate on Strength and Quality of Concrete for Buildings and Pavements
Influence of Superplasticizer S-3 on the Technological Properties of Concrete Mixtures
Tests Results Strength and Thermophysical Properties of Aerated Concrete Block Wall Samples with the Use of Polyurethane Adhesive
Applicability Study of Peck Formula Applied to Shield Tunneling in the Loess Area
Bearing Performance Test Research of Shallow Arch Circular Concrete Filled Steel Tube Support
Current Status and Development Trend of Assembled Structure in Cold Regions
The Energy Efficiency of Residential Buildings with Light Walling
Highly Filled Building Materials Reduced Flammability
Modern Building Materials and the Concept of "Sustainability Project"
Research on the Influence of Fiber Web to the Axial Compression Performance of EPS Composite Insulation Wallboard
Restrained Shrinkage Behavior of Concrete under Different Environmental Conditions
Risk Evaluation of the Subway Foundation Pit Based on Variable-Weight and Matter-Element Theory
The Implementation of Waste Sawdust in Concrete
Electrochemical Behaviors of Q420 Hot Galvanized Plate in Simulated Concrete Pore Solution
Modernization of Residential Buildings of the 1960s
Shear Strengthening Effects of RC Beams Using Aramid Plate Strip
The Quickly Erected Buildings in Modern Construction
Compound and Engineering Application of Fiber Reinforced Concrete with Low Shrinkage
The Research of Concrete Short Columns Strengthed with Angle Steel
Microstructure and Mechanical Properties of Laminated Mg-Based Composites
The Engineering Application of Carbon Fiber Reinforced Concrete Beam
Modeling of Reliability for Anti-Condensation Wall System in Underground Engineering Based on Markov Process
The "Comfort in all Respects" Principle Implementation by the Example of an Elementary School
Character and Development Analysis of Foam Concrete Cooperating Rice Husk Ash
The Energy-Efficient Heat Insulation Thickness for Systems of Hinged Ventilated Facades
Shield Tunneling Parameters Optimization Based on Dynamic Bayesian Networks
The Historical Characteristics and New Developments of Settling Spaces on Bridges
Chapter 8: Environment-Friendly Materials
Effect of Formamide on the Mechanical Properties of Thermoplastic Protein Films
Mechanistic Study on Adsorption and Oxidation of NO over Activated Carbon
Study on Metal Chelation Adsorption of NO Using Fe(II)EDTA Solution in Power Plant
Impact of Biochar on Water Holding Capacity of Two Chinese Agricultural Soil
Application Research of Slow-Release Fertilizer in Plant Camouflage
Study on CO2 Adsorption of Sepiolite Modified by Silane Coupling
The Full Immersion Test Research of Refractory Weathering Steel
Hydraulic Performance of Olive Stone Filtration Systems
Organobentonites for Controlled Release of Diazinon
Study on the Storage Stability of High Neutralization Degree Phosphate-Bonded No-Bake Sand
Chapter 9: Biomaterials and Bioresearch
A Comparison Study of the Effects of Ultrasonication on the Gelation Behavior between the Silk Fibroin of Domestic and Wild Silkworms
Determination of Luteolin by Fluorescence Spectrometry
Dynamic Models of Cell Growth and its ?-Carotene Synthesis from the Red Yeast Mutant
Extraction Technology and Determination of Total Flavonoid in Magnolia Liliiflora Petals
Fractal Modeling Research in Permeability of Camellia and Bancoul Nut Cakes under Cold-Press
Improving the Yields of Carotene from Red Yeast by Using Ultra High Pressure and its Mutagenic Mechanism
Synthesis of Tung Oil Monoglyceride
Analysis of Key Odor Compounds in Steamed Chinese Mitten Crab (Eriocheir sinensis)
Chemical Constituents Study of Weixian Turnip (Raphanus sativus L.)
Comparison of Volatile Compounds in Raw and Cooked Chinese Mitten Crab Hepatopancreas and Gonads
Effect of Cold-Induced on Quality of Black Carp Fillet Stored at Controlled Freezing-Point
Microstructure Analysis of Xanthoceras Sorbifolia Shell Activated Carbon
Optimization of Microwave Pretreatment without a Reagent of Pineapple Peel
Optimizing Clarification of Pineapple Peel
Preparation and Evaluation of Calcium Alginate/Glycyrrhizic Acid Hydrogel
Preparation of Antioxidant Hydrolysates from Round Scad (Decapterus maruadsi) Protein by Composite Enzymatic Hydrolysis
Purification of Enzymatically Produced Trehalose by Saccharomyces cerevisiae Strains Carrying Compound UV- and NTG-Induced Mutations
The Establish of Four Kinds of Chinese Primary Economic Crab Species Fatty Acid Fingerprints
Effects of Water Temperature on Biochemical Characteristics of Mandarin Fish during Live Transportation
The Effect of Modified Atmosphere Packaging on the Quality of Sturgeon Caviar at 0 degreesC
Characteristic Changes of Protein Occurring in Brine Salting Sturgeon at Different Levels of NaCl
Comparative Analysis of Amino Acid Composition in Antarctic Krill and White Shrimp
Component Analysis, Quality Measurement and Antioxidant Activity of Sambucus williamsii Seed Oil
Dicamba Degradation Using O3/UV Process in Aqueous Solution
Physicochemical and Rheological Properties of Gelatin Extracted from Tilapia (Oreochromis niloticus) Skin and Concentration Effect
Physicochemical Properties of Biodegradable Tilapia Skin Gelatin Film and Gelatin-Polysaccharide Based Composite Films
Plant MicroRNAs Responsive to Fungal Infection
Shortening Fermentation Period of Fermented Sausage by Adding Exogenous Enzymes
Study on Defluorination Effect of Antarctic Krill by Chemical Treatments
The Expression Analysis of WUSCHEL Gene under High and Low Temperature in Tomato Seedling
The Expression Analysis of the YABBY Transcript Factor-SlYABBY2a in the Tomato Seedling under Low Light
Towards Enhanced Bioactivity: Calcium Ion-Doped Polypyrrole
Vacuum Assisted Extraction of Indirubin from Radix isatidis through Orthogonal Test Method
A Bioaerosol Detection IRLidar
Effects of Different Purification Methods on Chicken Feather Keratin
Effect of Different Temperatures on Storage Quality of Fresh-Cut Apples
Finite Element Analysis of Femoral Fracture System
Influence of Operating Parameters on Physicochemical Properties of Fruit Juice Powders Produced by Spray Drying
Chapter 10: Polymer Materials
A Novel Cement Fluid Loss Additive P1402
A Self-Oscillating Polymer Chain with High LCST
Activation Energy of Autonomous Polymer Chains with High LCST
Preparation and Drug Release Behavior of IPN Hydrogel of Polyethylene Glycol and Octane Succinyl Chitosan
The Optimization Plastic Coefficient in AWC Research and Application
Effect of Relative Humidity on the Morphology of Electrospun Gelatin Aqueous Solutions
Melting, Crystallization Behaviors and Mechanical Properties of iPP Nucleated by ? Nucleation Masterbatches
Rheological Properties of all Para-Position Polysulfonamide Spinning Solutions
Simulation of the Flow-Induced Crystallization of Polypropylene Based on Molecular Kinetic Model
Study on Resin Infusion Behavior of the CFRP Integrated Manufacturing Process Based on RFI Process
A Novel Synthesis Process of PPTA by Nitrogen Cooling for Reaction Heat Removal
Crystallization Behavior and Crystal Morphology of PP/POEg Blends
The Kinematic Research in the Manufacture of Rigid Polyurethane Rubber Micro-V Grooves
Influence of Solvent Content on Properties of UHMWPA6 Fibers Prepared by Gel-Spinning Method
Chapter 11: Film Materials
Fabrication of Self-Organized Porous Anodic Alumina Film in Malonic Acid
Effects of Thickness on Resistance Switching Properties of ZnMn2O4 Films Deposited by Magnetron Sputtering
Investigation of Phase Transformation and Optical Properties of TiO2 Thin Films Deposited by Electron Beam Evaporation
Reaction Mechanism of Atomic Layer Deposition of Al on the Si (100) Surface: A Density Functional Theory Study
Effect of Al-Induced Crystallization on Structure of CdZnTe Thin Films Deposited by Radio Frequency Magnetron Sputtering
Influence of Sputtering Power on the Properties of CdS Thin Films Deposited by Magnetron Sputtering
Recent Progress in Gasochromics of Nano-Structured WO3 Film and its Applications
Structural and Optical Properties of (Al, Co) Codoped-ZnO Thin Film
Study of the Capacitive Properties of Strontium Barium Niobate Deposited by Radio Frequency Magnetron Sputtering
Chapter 12: Textile Materials and Technologies
Eco-Friendly Dyeing of Silk Fabric with Sodium Copper Chlorophyll
Fabrication of Twisted Continuous Nanofiber/Cotton Hybrid Yarns
The Exploration of Nickel Iron Fiber Absorbing Fabric
Chapter 12: Textile Materials and Technologies
Analysis on down Coat Fabric
Design Principle and Method of Digital Multicolored Warp Jacquard Fabric
Parameters of High-Density Soft Breathable and Anti-Velvet Fabric Technology
Research on the Ballistic Performance of UD Cloth/3D Fabric Composite Target
Testing of the Dynamic Permeability and Deformation of Airbag Fabrics
Comparative Study between DSC and Two Complementary Performance Evaluation Methods for PCM-Treated Textiles
Chapter 13: Corrosion and Surface Treatment Technology
The Effect of Wear and Corrosion Resistance of Austenitic Stainless Steel on Plasma Carburizing
Study of EMISE Ionic Liquids Inhibitor on the Corrosion Behavior of Steel Rebar by Statistical Methods in Alkaline Chloride Solution
Multiple Regression Corrosion Models and Corrosion Mechanism of High Chromium Cast Iron under Phosphoric Acid Medium Condition
Application of Visual Basic (VB) Language on Stress Corrosion Cracking Test of Materials
Oxidation-Resistance of (Ti,Al,Nb)N Coatings Prepared by Arc Ion Plating
Interaction Concrete with Acidic Fluids
Application of Origin in Material Corrosion Experiment
Effect of New Corrosion Inhibitor on Electrochemical Behavior of Prestressed Steel Wire in Simulated Concrete Pore Solution
Impact of Local Concrete Crack on the Prestressed Steel Stress Corrosion Cracking
Industrial Application of Pb-Ag-Ca Anode with Surface Passivation for Zinc Electrowinning
Investigation on Electrochemistry Behavior of Fe-Cr-Ni Alloy in Caustic Solution
Research on the Nitriding Effect of Ta-10W with Change of Process Parameters
The Micro-Fabrication of Multidimensional Structure of Silicon by Selection Corrosion
Process Design of Strengthening and Toughening Treatment for 65Mn Steel by Powder RE-Boronizing Method under Low Temperature
Chapter 14: Materials Mechanical Behavior and Fracture
Analysis on Fracture Mechanism of T92 Steel under High Temperature Multiaxial Creep
Ballistic Resistance of AA5083-H116 Aluminum Plates against Conical-Nose Steel Projectiles Impact
Piston Contact Stress Analysis and Simulation
The Damage Analysis of Composite Laminate under the Action of Low Speed Impact and Static Pressure Mark
Development and Change of Compressive Strength for Class G Oil Well Cement under High Temperature
Method for Determining the Plastic Properties of Metallic Materials by Instrumented Indentation with Dual Pyramidal Indenters
Study on Flow Mechanism of Gas Injection in Porous Carbonate Core
Effect of True Strain on Processing Maps for Processed Ni-Based Superalloy below ??-Transus Temperature
Effect of Strain on Microstructures and Mechanical Properties of Warmly Deformed SCRAM Steel for Fusion Application
Influence of Carbon on Mechanical Behavior of Fe-Mn-C System Alloys
Multiscale Simulation of Crack Propagation Based on Molecular Dynamics
Numerical Simulation Study on High-Cycle Fatigue Damage for Metals
Evaluation of Mechanical Properties of Hastelloy C-276 Weld by Small Punch Test
Constitutive Modeling for Superplastic Flow Behavior of H62 Alloy
Correlation Degree Analysis on Temperature and Operating Pressure to Stress Corrosion Cracking Susceptibility
Experimental Study on Shot Peening to Improve Diaphragm Spring Fatigue Life of Automobile Clutch
Prediction of Flow Stress for Superplastic Tension Deformation
Quantitative Analysis of Instability for Superplastic Tension
Theoretical Deduction of Constitutive Equations with Variational Parameters during Superplastic Tension
Influence of Grain Size and Lamellar Spacing on the Fatigue Crack Propagation in ?-TiAl Alloy
Study on the Microstructure and Fracture Mechanism of Stable ? Phase Containing Tial Alloy
The Fatigue Behavior of Carbon Fiber-Reinforced Composite T300/Epoxy under Tension-Tension and Bending Fatigue Loading
Research on the Relationships between Plastic Viscosity of Picking Liquids and its Tack Value
Texture Evolution of Commercially Pure Copper during Ultra-Thin Strip Rolling
Regularity of Decreasing Strength Limit at the Time of Concrete's Freeze-Thaw Cycling
The Preparation and Tribological Properties of Graphite Fluoride
Nonlinear Model and Numerical Solutions of Large Deformation of Functionally Graded Conical Shell
Calculating Fatigue Life of Helicopter Composite Blades Based on the Residual Strength Theory
Aircraft Composite Structures Fatigue Durability Test Method
The Preparation and Performance Study of Thermal Insulating Materials with Diatomite
Mechanical Response of Ping-Pong Racket to Different Hyperelastic Surface Materials
Research on Grind-Hardening Process through Integration of Physical Experiments and Dynamic Simulation
Chapter 15: Surface Engineering / Coatings Technology
Hydrophobic Coating on Silicon Wafer by Use of Industrial Coating-Bar Process in Atmosphere Parameter
Slip Length Measurement of Water Flow on Graphite Surface Using Atomic Force Microscope
The Influences of Additives and Heat Treatment on the Properties of Electroless Plating Ni-W-Mo-P Alloy on the Aluminum
Research and Development on the Antiaging Polymer Coatings
Preparation and Characterization Composite Ceramic Coating Doped with ZrO2 Particles on TC4 by MAO
Preparation and Characterization of Al(OH)3 Coated CaF2 Composite Powder
Preparation of Pd Composite Membrane and its Surface Morphological Changes after Elevating Temperature in Different Atmoshphere
Research on the Microstructure and Properties of Coating on Galvannealed High Strength IF Steel
Preparation of PAI Composite Coatings and its Tribological Behaviors
New Technology of Electroless Silver Plating on Fly Ash Cenospheres with Thermo-Alkaline Activation
Preparation of Superhydrophobic Surfaces with Different Degrees of Oleophobicity
Progress in Thermal Barrier Coatings for Gas Turbine Engines
FE Modeling of Stress Distribution in MAO Coating on TC4 Substrate under Thermal Shock Cyclic Loading
Investigation of Durability T = f (vc) in Turning of the AISI 304 Austenitic Stainless Steel Using the CNMG 120408 Coated Carbide Insert
Research on Wear Characteristics of CVD Composite Coated Tool in Natural Marble Cutting
Densification Behavior and Microstructure Evolution of Laser Surface Melting Processed Silicon-Containing Micro Arc Oxidation Coating
Influence of Additive on Morphology and Nucleation Mechanism for Zn-Electrodeposition
Preparation and Antimicrobial Properties of Surface Antibacterial Layer of Aluminum
Chapter 16: Forming Technologies
Effect of Drawing Processes on Wire Breaking in Steel Wire Production
Effects of Parameters on Fine Blanking of Steel Synchronizer Ring Teeth
Runner Balance Design of Soap Box Compounding Cavity Based on Moldflow
Study on Deformation Law of Drum-Shaped Blank and Collapse Defect in Rolling Process
Study on Spring-Back of CU11000 Clad AL1050 Sheets
The Application and Research on Manufacturing Technology of the Heavy Forging
The Application of Steady-State Thermal Expansion of the Rolls in Thickness Setup Model for HSM
The Optimization of Thickness Model Adaption in Hot Strip Mill
Research on Tension and Correction of Filming Steel Strip on Hydrosol Salivation Machine
Experimental Study on Three-Dimensional Flexible Stretch Bending Formability for Complex Cross-Sectional Profiles of TWB
The Effect of Screw Speed on Extrusion Quality of the Single-Screw Extruder
Numerical and Experimental Investigation on Hot Stamping of Ultra-High Strength Steel
Coupled Thermo-Mechanical FEM Simulation of Multi-Pass Vertical-Horizontal Rolling Process
Development of Environmentally Friendly Binder in Extrusion Molding
Effect of Mid-Roll Shift on the Strip Flatness for CVC 6-H Mill
Effect of Steel Strip-Feeding Process on Solidification Structure
Metal Average Deformation Velocity and Forward Slip Model for Longitudinal Profiled Plate Rolling Process
Optimization Design of Evaporator Tube Plate Mold Based on PDX
Stress-Strain Analysis of the Sun Shaft in Cross-Wedge-Rolling
Study of Isothermal Split-Die Precision Forging Process of High-Strength Aluminum Alloy Complex-Shape Forgings
Study of Submacroscopic Melting of Polymer in Single Screw Extrusion - Physical Model of Polymer Granule Melting
Study on the Influence of Thickness and Width on the Post-Buckling Deformation of Cold-Rolled Strip
Technique of Extrusion Die Tolerance Analysis Based on CAT
The Influences on Microstructure and Segregation of the Jumbo Slab Ingot by Different Cooling Speed
On-Line Measurement of Rheological Properties of LDPE, HDPE and LDPE/MICA Systems in Single-Screw Extrusion
Study on Convergence, Calculation Speed and Precision of Flatness Analysis Method for Cold Rolling Strip
Causes and Remedies for some Physical Defects in Rotary Swaged Products
Experimental Investigation on Rotary Punching by the Compression of Polyurethane Pad
Influence of Rotary Forging Process on Microstructure and Properties of Niobium-Titanium Alloy
Key Technical Analysis of Roll Forming for High Strength Rectangular Tube
Numerical Simulation of Polyurethane Pad Punching Process
Preliminary Investigations on Preparation of Cu-Al Bi-Metallic Tubes Using Swaging-Diffusion Method
Research Status of Sheet Metal Blanking Processes
Technology of Finite Element Analysis for Roll Forming Process
Analysis of Metal Deformed Flow under Adhesive Friction by Ring Upsetting
Investigation on the Effect of Liquid Hammer Geometry to the Pressure Distribution of Innovative Hybrid Impact Hydroforming
Large Container End Plate Stretch Forming Technology
Oval Aluminum Tube Extrusion Process Simulation with Two-Hole Dies
Research on Finite Element Simulation of the Big Size Spring Steel in Continuous Grooveless Rolling
The Ring's Axial Deformation Control Method of Vertical Hot Ring Rolling Process
Problems of Cold-Bent Notched C-Shaped Profile Members
Study on Simulation and Experiment of Micro Sheet Metal Forming
The Pressed Products on the Basis of Gypsum
Effect of DROF Process on the Temperature Field and Roll Force
Simulation to the Temperature Field for Continuous Casting Billet during Direct Rolling of Free-Heating
The Strain Analysis of Plate Cross Wedge Rolling of Spiral Shaft Parts
Research on a Kind of no Punch Hollow Part Hydraulic Pressure Expand Mould
Manufacturing Process for Bush Type Bearing Metal Using Centrifugal Casting
Chapter 17: Material Machining
Efficiency Analysis on the Synthetically De-Icing Technology Combining Thermal Water-Jet Cutting with Mechanical Milling
Study on Cutting Performance of the Alumina Based Nanocomposite Ceramic Tool
TC4 Titanium Alloy Surface Crack Detection and Analysis
A Processing Predictive Model of Ultrasonic Vibration Grinding Assisted Electric Discharge Machining Based on Support Vector Machines
Design and Tuning of the Ultrasonic Wide-Blade Horn for Joining and Cutting Non-Woven Fabrics
Study on Virtual Machining Process of Peripheral Milling of Thin-Walled Workpiece
The Evaluation of the up and down Milling Based on its Chip
Experimental Study on Effects of Feed per Tooth on Shear Angle and Friction Angle in Orthogonal Milling of Titanium Alloy
Experimental Study on Electrochemical Drilling of Micro Holes with High Aspect Ratio
Chapter 17: Material Machining
Study on Material Removal Mechanisms of Surface Fatigue Layer Based on Handheld High Velocity Arc Machining
Experimental Study on the Optimization of Ti1023 Milling Parameters
Research and Development of Ultrasonic CNC Cutting Path Generation System for Nomex Composite Materials
Optimization of Electric Discharge Machining Parameters of Al-7%Si-4%Mg with 20% of Red Mud Metal Matrix Composites
Simulation of Residual Stress in Cold Working of Flat Spiral Springs
Polishing Experiment Study of the Elastic Coated Abrasives
Machinability Assessment of Titanium Alloy Ti-6Al-4V for Biomedical Applications
Study on Key Technologies of Handheld High Velocity Arc Machining Equipment
The Cooling Characteristics of Quenching Mist under Different Conditions
Chapter 18: Welding and Joining
Microstructure and Bending Property of Welding Joint Prepared by 5356 Welding Wire Added Sc, Zr and Er
Study on the Thermal Expansion Displacement during Spot Welding Depending on the Multi-Physical Coupling Finite Element Model
Research on the Laser Welding Technology of LF21
Study of End Cracking during One-Sided Submerged Arc Welding with Flux-Copper Backing
Arc Characteristics and Droplet Transfer Analysis of Disconnect Impulse Arc Welding for Repairing Surface Default of Metal Parts
Influence of Heat Treatment on Microhardness and Microstructure of the Joining Interface for Ti-24Al-15Nb-1.5Mo/TC11
Microstructure and Properties of Mg/Al Dissimilar Joints by GTAW with Al-Si Filler Wire
Research on Surfacing Welding and Machining Process of Large Valve Corrosion Resistant Layer
The Effect of Joule Heat on Coupling Temperature Field of Friction Stir Welding
The Microstructure and Properties of TIG Welded Joint of AZ31B/Cu Dissimilar Metal
Ultrasonic Horn Design and Weldability in Thin Ni Plates Welding
Experimental Research of Activating Fluxes in A-TIG Welding of 5052 Aluminum Alloy
Relationship between the Microstructure of the Welded Steel Plates and the Efficiency of Vibration Stress Relief
Weld-Bonded Joints Properties with Advanced High Strength Steel DP600
Sealing of Sapphire Infrared Windows by Ultrasonic Interfacial Deposition Soldering
The Implementation of Martensitic Heat-Resistant Steel Welding Performance Analysis and Process
Characteristics Evaluation of Weld and Deposited Metal Zones in the Case of Welded with Inconel 718 Filler Metal to Cast Steel for Piston Crown Material
Performance of Cohesive Zone Models for Brittle and Ductile Adhesives
Improvement of the Wear Resistance of A6061 Plate by Resistance Seam Welding with High Carbon Iron Alloy Powders
Welding Spark Parameters Determination for Cyclone Removal Calculation
Chapter 19: Micro-Fabrication Techniques
Experimental Research of Hydrogenous Fuel Production from Biogas for Usage in Fuel Cells of Autonomous Power Supply Systems
High-Speed, High-Precision Magnetic/Piezoelectric Hybrid Drive Actuator for Micro Electrical Discharge Machining
Influence of Grain Size and Grain Boundary of Workpiece on Micro EDM
Model Structure and Simulation Analysis of a Novel Magetic Suspension Spindle Apparatus for Micro EDM
Study on the Effect of Tool Polarity and Tool Rotation during EDM of Non-Conductive Ceramics
The Periodical Translocation Gear-Grinding Technique to Improve the Indexing Accuracy of Ultra-Precision Gears
Experimental Investigation of Fabrication of Double Tapered Hole Array by Using Electroforming and Mask Electrochemical Machining
Exploration of Hyperfine Micro-Machining Limit
Microfluidic Chips with Micro-Pillar Array for Cell Capture
Thermal Accumulation in Metal Micro-Parts Fabricated by Micro Droplet Deposition Manufacturing Technique
Chapter 20: Laser Processing Technology
Contrast Prediction for Laser Direct Part Marked Data Matrix Symbols on Titanium Alloy Substrates
Study of Effect of Laser Marking Data Matrix Symbols on Titanium Alloy Sheets Using Nd:YAG Laser
Experimental Research on Affect of Water Jet to Laser Compound Processing of Crystalline Silicon
Influence of Laser Input Current and Water Jet to Etching Amount of Polycrystalline Si Wafer
Thin Wall Formed by Multi-Layer Overlapping Laser Cladding Forming
Laser-Energy-Density Dependent Formation of Al2O3-TiC Coating by Laser-Assisted Combustion
Directly Manufacturing Mouse Mold by Plasma Deposition Manufacturing
SLC Technologies for Ferroalloy Part Surface Modification
Laser Cladding of Co-Based Alloy on 316 Stainless Steel
Formation of TiC0.3N0.7/TiN Composite Film on Ti-6Al-4V Alloy by YAG Laser Irradiation
Chapter 21: Machining Tools, Testing Technologies and Error Measurement
New Method of Plane to Plane Parallelism Error Measurement Based on Flatness Plane
Modeling and Identification of Geometric Error Based on Screw Theory
Measurement Uncertainty Evaluation of a Virtual Instrument for Thickness Monitoring of Brush-Plated Coating
Efficient Genetic Algorithms for Measurement of Flatness Error and Development of Flatness Plane Based on Minimum Zone Method
Simulation Analysis and Experimental Study of Initial Permeability Testing Technology
The Study of Closed-Loop Position Control System Based on CNC Processing
Chapter 22: Modeling, Analysis and Simulation of Processes
Influences of Edge Rolling on Unsteady Deformation of Metal in Roughing Stage of Continuous Hot Strip Rolling
Mathematical Model of Topology Modification of Tooth Surface and Error Characteristics
Modeling for HAGC Press System of Rolling Mill
Computational Solution of Contact Problems with Unilateral Constraints and Friction by Step-by-Step Analysis
Simulation and Analysis of Material Horizontal Vibration Conveying Based on DEM
The Fiber Orientation Angle Determination for a Composite Anisotropic Solid Rod in Pultrusion
Application of Two Damage Identification Methods Based on Sensitivity Analysis in Steel Structure
Prediction and Control of Hot Pressing Rebound of Fan Blade Based on Thermal Mechanical Coupling Simulation
Analysis of an Orbital Grinding System for Grinding Crankshafts for Large Ship Engines
Influence of Cold-Rolled Strip Temperature on the Interference Fit of Entire Roller Embedded Shapemeter Roll
Numerical Simulation and Process Analysis for Injection Forming about the Thin-Wall Conical Centrifugal Disc
Numerical Simulation of Liner Curvature Radius on Formation of LEFP
Study on Transverse Uniformity of Phase Transformation for Hot-Rolled Strip on Run-out-Table
Finite Element Modelling of Copper by Equal Channel Angular Extrusion
Hot-Rolling Batch Planning Problem of Round Bar with Roller Capacity
Modeling and Virtual Simulation of Hard Surface Milling and Forming Process Using Advanced CAE Systems
The Inverse Prediction for Profile Extrusion Die Based on the Finite Element Method
A Numerical Approach for Simulating a Self-Contacted Elastic Rod
A Schwarz Alternating Algorithm Using Elliptical Arc Artificial Boundary for Exterior Problems with a Concave Angle
Material Removal Model and Experimental Analysis in the CMP of Si-Based Fiber Array
Research on FEM Simulation of Splitting Spinning Progress about 2024 Aluminum Alloy
Finite Element Simulation of Seven-Hole Propellant Extrusion and the Optimization of Die Compression Ratio
Modeling of Multilayered Sheets for Thermoforming Applications
Numerical Investigation on Angle of Repose of Cylindrical Particles
Chapter 23: Thermal Engineering Theory and Applications
Diffusion and Oxidation Wear of Superhard Cutting Tool Based on Thermodynamics Enthalpy
Stress Modeling of Large Cylindrical Ingot Heating Process
Study of Crack Length Measurement and Crack Tip Plastic Zone Determination by Infrared Thermography
The New Model of Laminar Cooling System and its Fieldbus System
Experimental Research on Crock-Type Metal Fibre Burner of Chinese Cooking Appliance
Cooling Rate, Microstructure and Property Studied of Spray Cooling of Heavy Shell Ring Rolling
The Transient Temperature Field Simulation and Analysis of Machinery's Components by ABAQUS
Numerical Simulation Analysis of Rail Head for U75V in the Process of Spray Cooling Temperature Field
Study on Energy Saving Model of Air Condition for Subway Station
Effect of Normal Pressure on the Coupled Temperature Field of Pin-Disc in Electromagnetic Environment
Experimental Study on Film Cooling Efficiency of Flat Plate through Infrared Thermography Technique
ISO 11439 I-Cylinder Bonfire Test and Safety Evaluation
Modelisation of Calorific Capacity by the Debye and Brillouin Functions for the Formalization of the Magnetothermal Problem
Energy Consumption Analysis of Thermal Regeneration of Activated Cokes Loaded with SO2
The Influence from the Return Water Temperature of Condenser on the Cooling Capacity and Power Consumption of the Cold-Water Screw Unit Used on Cold Storage
Application of Thermal Contact Resistance in Simulation of Heat Dissipation by CPU Heat Sinks Based on ANSYS
Heat Transfer Capacity of Composite Cooling System for Automobile Lithium-Ion Battery with Heat Pipe and Phase Change Materials
The Influence of the Position of the Steel Element to Heat Flow in the Wall of the Industrial Freezer
Effect of Model Structure on Thermal Conductivity of Sandwich Composites
Thermal Insulative Performance of Bamboo Leaf Aerogel Opacified Using Activated Carbon Compared with Carbon Black
The Influence of Induction Heating to Remelting Temperature Radial Distribution
Theoretical Analysis and Experimental Study on Heat-Transfer in Cryogenic Gas Atomization Jet Cooling Nickel-Base Alloy
Thermal Stress Distribution Simulation Analysis for Disc Brake of Heavy Vehicles
Thermomechanical Coupled Analysis of Multidisc Friction Pairs in Hydro-Viscous Drive
Thermal Structure Coupling Analysis of Universal Mill's Horizontal Roller Ring Based on ANSYS
The Research of the Effect of Velocity on Coupled Temperature Filed in Pin-on-Ring Friction Pair under Electromagnetic Field
Research on Design and Principles of New Regenerant for Restoring Performance of Aged Pitch
Chapter 24: Mineral and Soil Mining and Processing
Hydraulic Fracturing Technology Design in Natural Fracture Reservoirs
Study on Floor Pressure Relief Law of Simultaneous Mining Working Faces in close Distance Seam Group of Dongsheng Coalfield
Study on the Abutment Pressure and Advanced Support of Driving Roadway along Goaf of Isolated Mining Face
Experimental Study of Fill Body Non-Uniformity for Cut-and-Fill Mining
Simulation and Analysis of Anti-Explosion Capability for Coal Mine Refuge Chamber
The Study of Remaining Oil Distribution in Tazhong 4 Oilfield's TZ402CIII Oil Group
Study of the Trellis Support of Working Face Roadway in Impact Coal Seam
Study on the Mining Induced Stress of Hard Surrounding Rock under Dynamic Pressure
Plugging Agent Type Selecting Methods for Channeling Reservoir
Study on Deep Reduction of Oolitic Hematite Assisted with Microwave Radiation
Study on Variation Regular Pattern of Development Indexes in Beierdong Block after Layer Recombination
Evaluation on Shale Gas Potential in the Sheling Group Yitong Basin
Finite Element Analysis and Optimization Design on Single Screw Pump of Offshore Petroleum Well Cementing LADS Device
The Characterization of the Rock Microscopic Pore Structure before and after Strong Base ASP Flooding
Discussion on Support Problems on Soft Rock Roadway
Research on Rock Mechanics Characteristics of Mud Sandstone NanTun Formation of HaiLaEr Oilfield
An Experimental Study on the Mechanical Properties of Cemented Rock-Tailings Fill
Investigation on the Sintering Properties of Mullite Al2O3-70%
Status Analysis of the Frozen Soil's Dynamics Parameter Study
Studies about the Drained Creep Characteristic of Silt Soil on k0 Consolidation
Characterization and Application of Super Clean Coal
Study on Extractiing of Heme from Tilapias Blood by Enzymatic Method