High Performance Structural Material

Preface
Symposium L: Metal Matrix and Ceramic Matrix Composites
Surface Pretreatment and Fabrication Technology of Woven Carbon Fiber Cloth Aluminium Alloy Matrix Composite
Improvement of Anti-Hydrolytic Property of AlN Powder Modified by the Rare-Earth Salts
Effect of the Ball Milling on the Microstructure and Mechanical Properties of AlN/Cu Composite
Effect of Sr and La on the In Situ A356-TiB2 Composite Fabricated via Remelting and Diluting Approach
Microstructures and Mechanical Properties of Three-Dimensional Braided Carbon Fiber Reinforced Mullite Composites with Different Sols as Raw Materials
Influences of Thermal Molding Process on the Flexural Properties of SiC/SiC Composites with a New Precursor Polymer
Microstructure, Mechanical and Dielectric Properties of Si3N4-BN Composites with Different Porosities
Preparation of Al2O3/Al-Si Composites by In Situ Reaction of Fe2O3+MnO2/Al System
Microstructure and Tribological Properties of Ni-Base Coatings under Different Lubrication Conditions
Microstructure and Mechanical Properties of BN Nanotubes Reinforced Si3N4 Porous Composites
Effect of Infiltration Temperature on the Composition and Mechanical Property of RMI C/C-SiC Composite
Influences of High Temperature Treatment of C/C on the Mechanical Properties of C/C-SiC Composites
Effect of BN Interphase Coating and PIP Cycles on the Mechanical Properties of VSI SiC/SiC Composites
Influence of Yb2O3 and Y2O3 on the Mechanical Properties of Porous Si3N4 Ceramics
Effect of Sample Size upon Quasi-Static Compressive Loading of Ti48Zr20Cu5Nb12Be15 Amorphous Composites
Effect of Ammonium Polyacrylate and Pre-Oxidation on Rheological Properties of Si3N4 Slurries
Double Negative Property in Co/YIG Prepared by Low Temperature Impregnation Process
Tunable Electromagnetic Properties of Yttrium Iron Garnet Ceramics
Influence of Hot Extrusion on Microstructure and Hardness of SiC Particle Reinforced Al-Zn-Mg-Cu Alloy Matrix Composite
Preparation of Cf/HfC Composite by Reactive MeltInfiltration Using Hf-Based Alloy
Effect of Curing Methods on the Mechanical Property of SiC Fiber Prepared via Hydrogenation
Preparation of Diamond Coatings on Alumina by Hot Filament Chemical Vapor Deposition
Anomalous Strain Rate Sensitivity of Nanocrystalline Ni Induced by Rolling Deformation
Microstructure and Mechanical Properties of Laminated Buckypaper/SiC Composite
Flexural Properties of T700 2D Cf/SiC Composites via Precursor Infiltration and Pyrolysis
Influence of Ethyl Acetoacetate on the Structure and Thermal Stability of Alumina Aerogel
Influence of Composition and Microstructure on the Mechanical Properties of SiC Ceramic Fibers
Interfacial Wettability and Thermal Conductivity of Diamond/Al Based Composites with Ti and B Additions
Preparation of Graphene and Graphene/Al Composites
Influence of Temperatures on the Formation of SiBCN Powders Prepared by CVD Using Borazine and Liquid Polycarbosilane
Preparation of BN Coating on KD-II Silicon Carbide Fiber by Dip-Coating Process
Effect of N2H4 on Electrodeposition of Ni-Graphene Composite Coatings and their Corrosion Resistance Property
Microstructure and Mechanical Properties of TiC/Ti3AlC2In Situ Composites Prepared by Hot Pressing Method
Influence of the Metal Particle Size and Sintering Process on the Electrical Resistivity of m-ZrO2/30%Mo Cermet
Microstructure and Mechanical Property of Ti3AlC2/TiAl3 Composite Synthesized by Hot Pressing
Symposium M: High Temperature/Ultra-High Temperature Structural Materials, Surface and Coating Engineering
Failure Mechanism of 7YSZ Splat as Thermal Barrier Coating
Preparation, Microstructure and Properties of ZrO2 Gradient Porous Ceramics by Freeze-Casting Process
Interaction between Nb-Silicide Based Alloys and Y2O3 Crucible
Thermophysical Properties of Gd2O3 Doped SrHfO3 Ceramic
Influence of Small Amounts of Si and Al on the Synthesis of Ti3SiC2 by Spark Plasma Sintering
Structure of B-Modified MoSi2 Coating on C103 Alloy Prepared through Glow Plasma Deposition and HAPC Combined Method
Aging Precipitation Evolving Process and its Effects on Mechanical Properties of 0Cr21Ni6Mn9N Austenitic Stainless Steel
Effect of Mullite Content on the Properties of Silica-Based Ceramic Cores
Investigation on Nano-Fused Silica in Silica-Based Ceramic Cores for Investment Casting
Thermophysical Properties of (Sm1-xNdx)2Ce2O7 Ceramic Oxides
Microstructure and Properties of AlSn20 Coating Deposited via Magnetron Sputtering
Microstructural and Mechanical Properties of TiAlN and Ti3AlN Films Deposited by Reactive Magnetron Sputtering
Influences of MCrAlY Coatings and TBCs on Oxidation Behavior of a Ni-Based Single Crystal Superalloy
Effect of Al Content on Microstructure and Creep Behavior of Low Density Ni3Al-Base Single Crystal Superalloy
Optimization of Ta Content of a Third Generation Ni3Al Base Single Crystal Superalloy
Influence of Rotating Speed on Mechanical Alloying Behavior of the Elemental Powder Blends of Nb-Ti-Si Based Alloy during Ball Milling Process
Symposium N: High Entropy Alloys and Special High Temperature Material
Effect of Annealing Time on the Microstructure and Mechanical Properties of the AlCrFeNi2Ti0.5 High Entropy Alloys
Microstructure and Mechanical Properties of the W-Ni-Co System Refractory High-Entropy Alloys
Symposium O: Advanced Magnesium Alloys and Application
Effect of Yttrium Content on the Ultra-High Cycle Fatigue Behavior of Mg-Zn-Y-Zr Alloys
Effect of Al-5Zr-1.1B Grain Refiner on Microstructure and Mechanical Properties of AZ91D Magnesium Alloy
The Effect of Casting Speed on Physical Fields of AZ80 Magnesium Alloy during DC Casting
Microstructure and Properties of Friction Stir Welded Mg-1Al-xSn-0.3Mn Magnesium Alloys
Effects of Quenching Rate on the Microstructures and Mechanical Properties of the Heat Treatable Mg-4.2Y-2.3Nd-1.0Gd-0.6Zr Magnesium Alloy
Tensile Behavior of Mg-Nd-Zn-Zr Alloy at Medium and High Temperature
Grain Refining Behavior of Zr, Al2Y and Al4C3 Particles in Magnesium Alloys by the First-Principles Calculations
Microstructure and Phase Transformation of Super-High Pressure Mg-Li Alloy
Influences of Tensile Temperature on the Mechanical Properties of Rolled Mg-Zn-Gd Sheets with Non-Basal Texture
Investigation on the Compound Phosphate Film Formed in Bath with Cerium Salts on the Magnesium Aluminum Alloy
Constitutive Modeling of Magnesium Alloys with Distortional Hardening
Microstructural Evolution and Mechanical Behavior of AZ31 Magnesium Alloy Sheets with Li Addition
Microstructure and Mechanical Properties of Submerged Friction Stir Processing Mg-Y-Nd Alloy
Microstructure of Directionally Solidified Mg-Zn Alloy with Different Growth Rates
Solid-Liquid Diffusion and Phase Growth Kinetics in Mg-Ca Binary System
Progress on Hydrothermal Synthesis of Biomedical Coatings on Magnesium Alloy
Effect of Additional Shear Stress on Microstructure Evolution of AZ31 Sheet by Differential Speed Rolling
Microstructures and Mechanical Properties of Extruded High-Purity Magnesium
Microstructure Evolution and Mechanical Properties of Mg-3Zn-0.5Er-0.5Al Alloy
Superplastic Instability and Damage Evolution of AZ31B Magnesium Alloy Shee
Investigation on the Physical and Chemical Grain Refinement of the Mg-10Sm Alloy
Effects of Different Species of Sr Additives on as Cast Microstructure and Tensile Properties of AS31 Alloy
Effective Dispersion of CNTs to Fabricate CNT/Mg Nanocomposite
Effect of Ce and Homogeneous Annealing on Microstructure and Deformation Performance of ZM21 Alloy
Influence of Long Period Stacking Ordered Phase on Non-Uniform Deformation in Cast Mg-Zn-Y Alloys
Microstructural Evolution of Mg-4Al-2.5Ca Alloy during Solidification
Forming of the Battery Cell Packing in Extruded AZ31 Magnesium Alloys through Backward Extrusion
Comparation about Refining Efficiency to Microstructure of AZ31 Magnesium Alloy for Sr Master Alloys
Microstructure and Mechanical Responses of Extruded Magnesium Alloy Sheets with Lithium Addition
Symposium P: Superalloys
Influence of Cooling Method on the Microstructure and Stress Rupture Property of a Single Crystal Superalloy
Effect of Titanium on Solidification Behavior of IC10 Directionally Solidified Superalloy
Influence of Thermal Exposure on the Microstructure, Surface Stability and Strength of a New Fe-Ni-Base Superalloy for A-USC Applications
Microstructure and Mechanical Properties of a Cobalt-Based Superalloy Used for Nuclear Power Station
Thermal Stability and Tensile Properties of GH984G Alloy for A-USC Power Plants
Influence of Fe Content on Microstructure and Mechanical Properties of GH984 Alloy
Effect of Long-Term Aging on Microstructure and Mechanical Properties of a Wrought Ni-Base Superalloy
Creep Behavior of a Single Crystal Nickel-Based Superalloy Containing Re/Ru at 1100 degreesC/137MPa
Effect of Hot Isostatic Pressing on the Microstructure of K417G Cast Turbine Discs
Interface Reaction between Ti3Al-based Alloy and Oxide Mold
Effect of Recrystallization on Crack Initiation and Propagation during Creep in a Directionally Solidified Ni-Based Superalloy
Microstructures and Creep Behavior of As-Cast TiAl-Nb Alloy
New-Type Co-Based Superalloys Designed by CALPHAD Method
Effect of Heat Treatment on Microstructure and High Temperature Wear Properties of High Boron Medium Carbon Alloy
Microstructure and Mechanical Properties of a New Ni-Cr-Fe-W-Al Alloy for Advanced Ultra-Supercritical Power Plants
Effect of Mo Addition on the Grain Growth of IN718 Alloy
Effect of Rhenium on Microstructure of Directionally Solidified Ni-Based Superalloys with High Chromium Content
Microstructure and Element Segregation of Ni-Base Superalloy Casting with Radiation and Liquid-Metal Cooling
Effects of Co on the Solidification and Precipitation Behaviors of IN 718 Alloy
Effect of Deformation Conditions on Dynamic Recrystallization of As-Cast GH625 Alloy
Study of Isothermal Oxidation Behavior of FGH91 Superalloy
Low Cycle Fatigue Behavior of Several Typical Powder Metallurgy Superalloys
Effect of Hafnium on the Microstructure and Creep Property of a Hot Corrosion Resistant Superalloy
Study on Hot Deformation Behavior of Cast-and-Homogenized Superalloy GH706
Quantitative Phase Field Study on the Precipitation Dynamics of ?' Phase in Ni-Based Superalloys with Different Concentration
Microstructure Characteristics of TIG Welding Joint of 740H Pipe for Ultra-Supercritical Power Plant Boilers
Symposium Q: Powder Metallurgy
Preparing Amorphous/Nanocrystalline TiNbZrTaFe Powder by Mechanical Alloying
Study on Preparation of LiNi0.5Co0.2Mn0.3O2 Precursor-Spherical Ni0.5Co0.2Mn0.3O2(OH)2
Preparation and Characterization of Amorphous Al-Based Metal Foams
Effects of Co Element on Microstructure and Magnetic Properties of Fe-6.5wt%Si Magnetic Powder Cores
Preparation and Electrocatalytic Activity of Nanophase WC-Co Composite Powder and WC Powder with Spherical Shell Structure
Corrosion Behavior of Tungsten Copper Alloy Produced by Infiltration Sintering
Effect of HA Content on Microstructure and Compression Properties of Ti-Nb-Sn/HA Composites Fabricated by Plasma Current Activated Sintering
Phenomenon of Gaseous Adiabatic Compression of Powder in Explosive Compaction
Double Inhibitory Actions on WC Grains of Microwave Sintered WC-12wt%Co-VC Alloy
Phase Structures and Properties of Au-Pd-M (M=Zr, Mo, Y) System
Symposium R: Steel
Effect of Pre-Quenching Process on Microstructure and Mechanical Properties in a Nb-Microalloyed Low Carbon Q-P Steel
Effect of Ferrite Status on Mechanical Properties of Hot-Rolled Directly Quenched and Partitioned Steel
Effect of Rolling Process on Impact Toughness in High Strength Low Carbon Bainitic Steel
Microstructure and Mechanical Properties of a Cold-Rolled Medium Manganese Steel with Delta Ferrite
Microstructure and Mechanical Properties of X70 Pipeline Steel with High H2S Resistance
Effect of Cooling Procedure on Tensile and Charpy Impact Properties of Cr-Mo Ultra-High Strength Steel
Simulation of Dilatation Curve Associated with Martensitic Transformation in a Dual-Phase Steel
Heat Transfer Characteristics from Single Group Slot Jet Impingement on the Strip Surface for the Hot Rolling Ultra-Fast Cooling
Effect of Ni Alloying on the Corrosion Resistance of 355MPa High Weather-Resistant Steel
Thermodynamics of Amorphous Silicon Oxides in Sub-Rapid Solidified Low Carbon Steel
Dynamic Behaviors of near ?-Type Ti-5Al-5Mo-5V-3Cr Titanium Alloys under High Strain Rate
Influence of Duplex Annealing on the Microstructure and Mechanical Properties of Ti62421S Titanium Alloy Plate
Hot Deformation and Processing Map of C919 Aluminum Alloy