Functional and Functionally Structured Materials II

<ul><li>Preface</li><li>Chapter 1: High Performance Structural Alloys, Properties and Processing Technologies</li><li>Effects of the Delivery Tube Diameter on the Qualities of Cu-9.7Sn-0.2P Alloy Powder Produced by Gas Atomization</li><li>Effect of Cold Rolling Reduction on Recrystallization Behaviors of AA5754 Sheets in a Short Annealing Time</li><li>Property Requirements and Research Progress of Aluminum Alloy Sheets for Automotive Closure</li><li>Thermal Deformation Behavior and Processing Map of Al-Mg-Er Alloy</li><li>Bake Precipitation Behavior in AA5182 Sheet for Can End Stock</li><li>Hot Compression Deformation Behavior and Microstructural Evolution of Al-7.5Zn-1.5Mg-0.2Cu-0.2Zr Alloy</li><li>Effect of Cold Deformation and Annealing on Microstructure and Mechanical Properties of 5083 Aluminum Alloy Sheets</li><li>Microstructural Changes and Thermal Stability of A201, 319s and 2618 Aluminum Alloys during Thermal Exposure</li><li>Deformation Behavior and Microstructure Evolution of 6063 Alloy during Hot Compression</li><li>Trace Al-Ti-C-Ce on Solidification Structure Transformation and Fracture Properties of Al-Cu-Mn Alloy</li><li>Effect of Equal Channel Angular Pressing on Microstructure and Mechanical Properties of ZL205A Alloy</li><li>Effects of Mechanical Vibration on Double Curvature Creep Aging Forming of 2124 Aluminum Alloy</li><li>Aging Behavior of A356.2 with Yb Modified</li><li>An Experimental Platform for Controlled Solidification and Heat Treatment and its Application in TiAl Alloys</li><li>Superplastic Deformation Behavior and Cavity Formation of Ti55 Titanium Alloy</li><li>Effects of Heat Treatment on Microstructures and Mechanical Properties of Ti-38644 Alloy for Aerospace Fasteners</li><li>Characteristics and Evolution Mechanism of Solidification Microstructure for Laser Additive Manufactured Ti₂AlNb-Based Alloy</li><li>On the Partial Pressure Measurement and Activity Calculation of Mn in the Ni-Cr-Co-Mo Alloy Melt</li><li>Microstructure Analysis and Creep Behaviour Modelling of Powder Metallurgy Superalloy</li><li>Effects of Phosphorus on Microstructure and Mechanical Properties in NiCr Alloys</li><li>Segregation and Precipitation Behavior of Phosphorus in a Ni-Fe-Cr Base Wrought Superalloy</li><li>Effect of Extrusion Texture on Mechanical and Electrochemical Properties of Aluminum Alloy Drill Pipe</li><li>Numerical Simulation of Combustion Resistant Titanium Alloy Wear Behavior at High Temperature Fields</li><li>Effects of Extrusion-Shear and Direct Extrusion on the Plastic Deformation of AZ31 Magnesium Alloy</li><li>Effect of Welding Parameters on Defects and Fracture Behavior of Friction Stir Welded 2195-T8 Al-Li Alloy Joints</li><li>Effect of Planar Anisotropy and Tension-Compression Asymmetry of CP-Ti on its Deep Drawing Behavior at Room Temperature</li><li>Effects of Solid Solution and Aging Treatment on Texture Evolution and Properties of Cu-Ni-Si Alloy</li><li>A Comparative Study on the Friction and Wear Properties of Three Different Copper Alloys</li><li>Experimental Study and Numerical Simulation of Microstructure Evolution in Al-Si Eutectic Solidification Process</li><li>Influence of Silicon on Nucleation and Growth Process of Spherical Graphite in Ni-C Alloys Solidification Structure</li><li>Effects of Process Parameters on Morphologies and Microstructures of Laser Melting Deposited V-5Cr-5Ti Alloys</li><li>Chapter 2: Steels and Structural Metals, Properties and Processing Technologies</li><li>Rate Theory for Dislocation Loops Evolution in AL-6XN Austenitic Stainless Steel under Proton Irradiation</li><li>Fatigue Mechanism of Domestic 316LN Stainless Steel in Simulated AP1000 First-Loop Water Environment</li><li>Influence of Warm Deformation on Strain-Induced Martensite Behavior of 316L Stainless Steel</li><li>Formation of Face Centered Cubic Titanium Thin Films on MgO(111) Single Crystal Substrate</li><li>Effect of Annealing Temperature on Microstructure and Properties of Ultra Purified Ferritic Stainless Steel Containing Copper</li><li>Microstructure Evolution of Copper Strip during Continuous Extrusion and Rolling Forming</li><li>Effect of Copper and Annealing Dew Point on Oxidation Behavior of C-Si-Mn Steels</li><li>Bare Spot Defect on a Hot Dip Galvanized DP Sheet Strip</li><li>Effect of Slab Centerline Segregation on DWTT Properties of 22mm Thick X80M Hot Rolled Steel Strip</li><li>Effect of Ultra-Fast Cooling Rate on the Microstructure and Mechanical Properties of High Strength Cold-Rolled Sheet under Continuous Annealing</li><li>Microstructure and Properties of HAZ in Low-Carbon Bainite E550 Steel during Double-Pass Welding Thermal Cycle</li><li>Nondestructive Evaluation Method of Average Grain Size in TWIP Steel by Laser Ultrasonic</li><li>Strain-Hardening Properties of High Grade Line Pipes</li><li>Transfer Welding Process and Microstructure and Properties of Titanium/Steel Clad Pipe</li><li>Simulation Study on Heating Process of Hot Rolled Steel Strip for X80M Pipeline Steel</li><li>Development of Domestic CT80S Sulfur Resistance Coiled Tubing</li><li>Chapter 3: Functional Coatings, Claddings, Surface Treatment and Corrosion Behavior of Structural Materials</li><li>Microstructure and Oxidation Resistance of Y Modified Silicide Coatings Prepared on Zr-Ti-Al Alloy</li><li>Bio-Inspired <i>In Situ </i>Fabrication of 11-Mercaptoundecanoic Acid Coating on Stainless Steel 304 for Corrosion Protection</li><li>A Thick Al-Based Composite Coating Cladded by the Amorphous Powder</li><li>Wear Resistance of a Large Thick Fe Based Amorphous Composite Coating Deposited by Laser Cladding</li><li>Electrodeposition and the Optimization of Molybdenum Layer on Nb-Ti-Si Based Ultra-High Alloys from Aqueous Solution</li><li>Efficient Micro-Arc Oxidation Technology for As-Cast AZ80 Magnesium Alloy</li><li>Morphology and Microstructure of Tungsten Films by Magnetron Sputtering</li><li>Understanding the Inhibition Mechanism of a Supramolecular Complex as the Corrosion Inhibitor for Mild Steel in the Condensate Water</li><li>Influence of Sc Addition on the Corrosion Behavior of Medium Strength Al-Zn-Mg Alloy</li><li>Effect of Sodium Citrate on Electrochemical Behaviour of Copper in Acid Bath</li><li>Chapter 4: Functional Ceramics and Composite Materials</li><li>Effect of WC Additive on Microstructural Evolution and Properties of TiC Steel-Bonded Carbide</li><li>Effects of Lanthanum Substitution on Dielectric, Ferroelectric and Electro-Optic Properties of Slim-Loop PLZT Ceramics</li><li>Preparation and Characterization of Mechanical Properties of Hydroxyapatite/Carbon Nanotube Laminated Ceramic Composites Consolidated by Spark Plasma Sintering</li><li>Raman/Infrared Spectra and Microwave Dielectric Properties of 0.22CaTiO₃-0.78(Li_0.5Sm_0.5)TiO₃ Ceramics with MgO Additive</li><li>Effects of Different Matrix on Interface and Compression Fracture Behavior of WC Particles Reinforced Iron Matrix Composites</li><li>The Structural Evolution of Al-6Y-2P Master Alloy and its Influence on the Refinement of Mg₂Si Phase in Mg₂Si/Al Composites</li><li>Establishment of Processing Maps for 25vol.% B₄C_P/AA6061 Composite and its Application in Hot Pack-Rolling Process</li><li>A Facile Method of Preparing Core/Shell Cu@Mo Powders</li><li>
<i>In Situ</i> Synthesis and Structural Design of Ti/TiC Functionally Graded Materials</li><li>Microstructure and Mechanical Properties of AlN Particle Reinforced Mg-Al Matrix Composites with Different Particle Contents</li><li>Effect of Carboxylic CNTs Filling on Mechanical Behaviors of Basalt Fiber/Epoxy Composites</li><li>Machinability for C/SiC Composite Material by Electrical Discharge Machining</li><li>Interfacial Microstructure and Formation Mechanism of Zirconia Ceramic and Nb Brazed with Ag-Cu-Ti Powder without and with Mo-Particle-Reinforced</li><li>Effect of Modified Diatomite on Crystallinity and Mechanical Properties of Polypropylene</li><li>3D Printing of Carbon Fiber Reinforced Plastics and their Applications</li><li>Interfacial Effect on Mechanical Properties of Polypropylene Ternary Nanocomposites</li><li>Chapter 5: Computational Procedures in Materials Science</li><li>Structures, Mechanical Properties and Band Structures of Pentagonal B<i>_x</i>N<i>_y</i> Monolayers</li><li>First-Principles Study of the Effect of Cr Content on Interstitial Oxygen Solution Behavior in Nb-Cr Alloys</li><li>Thermodynamic Calculation of Liquidus Projection of Multiple Aluminum Alloys</li><li>Stability, Mechanical Properties and Electronic Properties of X₃Si (X=V, Nb, Cr, Mo and W) from First Principles Calculations</li><li>Tensile Properties of Carbon Nanoring Linked Graphene Sheets: A Molecular Dynamics Investigation</li><li>CRSS of Mg-X(X=Zn, Y) Binary Solid Solution via First-Principles Study</li><li>Design of New Weathering Steels through Thermodynamic Model of Nitrogen Solubility and CALPHAD</li><li>Influence of Initial Defects on the Mechanical Properties of Single Crystal Copper: Discrete Dislocation Dynamics Study</li><li>CBED and EELS Measurements of Post-Irradiated Aluminum Specimen Thickness</li><li>Cascade Collision near the Grain Boundary of Fe-Cr Alloy by MD Simulation</li><li>Chapter 6: Advanced Functional Materials</li><li>Magnetic Properties of Pure Iron with Respect to Different C/Si Ratios and Grain Sizes</li><li>Iron-Based Amorphous Magnetic Properties by Ni Content Tuning and Isothermal Treatment</li><li>A Centimeter-Size High Toughness Zr-Cu-Al-Nb Bulk Metallic Glass with Nano-Crystallization and Phase Separation</li><li>Effect of Service Environment on Mechanical Properties of FeCoNiCrAl_0.1 Alloy</li><li>Y-Ray Shielding Performance and Mechanical Properties of Mortar Strengthened by Amorphous Alloy Fibers</li><li>Effect of Annealing Time on the Magnetic Properties of FeNiCuNbSiB Dual-Phase Alloys</li><li>Preparation and Sorption Properties of Zr-Co-Ce Getter Films</li><li>Easy Preparation of Bacterial Cellulose/Triamcinolone Acetonide Composites and their Inhibition for Fibroblasts</li><li>Glucose-Responsive Hydrogels Based on Phenylboronic Acid</li><li>Synthetic Comb-Like Phase-Change Material Poly(Acrylonitrile<i>-co-</i>Lauric Acid) Copolymer for Low Temperature Energy Management</li><li>Preparation and Characterization of Flame Retardant PET Fiber via Melt Blending</li><li>Evaluation of Foaming and Nucleation and Growth Mechanism of Soy-Based Polyurethane Foams</li><li>A Metal Coordination Crosslinking Novel High Performance Thermoset</li><li>Investigation on the Dealloying Process of Mn_75-xNi₂₅Al_x (x=0, 5, 10, 15, 20 at. %) Alloy Ribbons</li><li>Phase Transition Behavior and Magnetocaloric Effect in a Heusler Ni₅₀Mn₃₇Sn₁₃ Unidirectional Crystal</li><li>Effects of Zr Content on the Bending Property and Crystallization Behavior of Ductile Zr-Based Bulk Metallic Glasses</li><li>Chapter 7: Materials and Technologies for Energy Storage Devices, Alternative Energy Production and Electronics</li><li>Chemical Modification Graphene as a High Performance Anode Material for Lithium-Ion Batteries</li><li>Preparation of Graphene/N-TiO₂ Nanoclusters by One Step Anodic Oxidation for Visible-Light-Driven Hydrogen Production</li><li>Low Temperature Preparation of PbS Thin Films by Chemical Bath Deposition and the Photovoltaic Performance in Heterojunction Solar Cells</li><li>Enhanced Thermoelectric Properties of BiCuSeO Ceramics by Bi Vacancies</li><li>Synthesis and Thermoelectric Properties of WO₃/Cu₂SnSe₃ Composites</li><li>Graphene-Carbon Nanotubes-Modified LiFePO₄ Cathode Materials for High-Performance Lithium-Ion Batteries</li><li>Microfluidic Synthesis and Electrochemical Performance of Ternary Metals Nanoalloy: FePtSn</li><li>Si-Ni Alloy as Anode Materials for Lithium Ion Batteries: A First-Principles Study</li><li>Tungsten Matrix Material for Diffusion Barium Tungsten Cathode</li><li>Preparation and Influencing Factors of Molybdenum Targets and Magnetron-Sputter-Deposited Molybdenum Thin Films</li><li>Effects of Rare Earth Y Addition on Microstructural and Properties of Pure Copper</li><li>A Charge Storage Based Enhancement Mode AlGaN/GaN High Electron Mobility Transistor</li><li>Chapter 8: Materials and Technologies for Environmental Engineering and Waste Recycling</li><li>Improvement Effects of Different Environmental Materials on Coastal Saline-Alkali Soil in Yellow River Delta</li><li>Effects of Ferric Salts on Sludge Anaerobic Digestion and Desulphurization</li><li>Denitrification Activities of Mg-Mo-V-Ti Catalysts Prepared by Dipping Method at Low Temperature</li><li>Denitrification Activities of Mo-V-Ti Catalysts Prepared by Dipping Method at Low Temperature</li><li>Effects of Calcination Temperature on the Microstructure and Adsorption Properties of Attapulgite Microspheres</li><li>A Review of Research on Substrate Materials for Constructed Wetlands</li><li>Polyamidine as a New-Style Coagulant Aid for Dye Wastewater Treatment and its Floc Characteristics</li><li>Kinetic Equilibrium and Adsorption Thermodynamics of Direct Dyes by Ca/CTS/FA Composite</li><li>Influence of Catalysts with Different Templates on Direct Decomposition of NO in Cement Kiln Exhaust</li><li>Extraction of Tungsten and Vanadium from the Spent SCR Catalyst by High Pressure Alkaline Leaching Method</li><li>Preparation of Tungsten Nanoparticles from Spent Tungsten Carbide by Molten Salt Electrolysis</li><li>Effect of Cement Raw Material and Oxygen Concentration on SNCR Reaction</li><li>Different Precipitant Preparation of Nickel-Doped Mn/TiO₂ Catalysts for Low-Temperature SCR of NO with NH₃</li><li>Energy Consumption and Carbon Emission Analysis of Natural Graphite Anode Material for Lithium Batteries</li><li>Life Cycle Assessment of Typical Rubber-Plastic Sponge Production in China</li><li>Life Cycle Assessment of Typical Glass Wool Production in China</li><li>Life Cycle Assessment of Nickel Production in China</li><li>Environment Impact Analysis of Natural Graphite Anode Material Production</li><li>Comparative Life Cycle Assessment of Autoclaved Concrete Blocks and Fired Blocks in China</li><li>Synthesis and Photocatalytic Activity of Ag Doped TiO₂ Nanofibers</li><li>Structure and Surface Properties of Al³⁺- Modified Sepiolite</li><li>Chapter 9: Advanced Building Materials</li><li>The Rheological Properties of Crumb Rubber with Different Recycled Waste Tires Modified Binders</li><li>A Comparative Life Cycle Assessment of Typical Foam Glass Production</li><li>Effect of Layered Double Hydroxides with Different Particle Size on Properties of Bitumen</li><li>Effect of Different Media Aqueous Solution on Road Performance of Asphalt Mixtures</li><li>Rheological Model and Viscoelasticity of Crumb Rubber Modified Bitumen</li><li>Investigation on Rheological Characteristics of Fresh Cement Mortar</li><li>Mechanical Properties of Self-Healing System in Cementitious Material with Microcapsule</li><li>Effect on Structure and Properties of Cement-Based Materials by Polymer-Modified Metakaolin Slurry</li></ul>