Material Science and Engineering Technology II

<ul><li>Preface, Committees and Sponsor</li><li>Chapter 1: Composite Materials</li><li>Fibrous Cerium (IV) Hydrogen Phosphate Membrane Self-Supported Benzimidazole Polymerization Agent</li><li>Polystyrene/Lamellar Germanium Phosphate Nanocomposite Membranes</li><li>Influence of Tool Geometry and Contact Condition on Friction Stir Welding of Al-Cu Laminated Composites</li><li>Ultrasound Assisted Synthesis of Visible Light Responsive Nitrogen Doped TiO₂ Nano Photocatalyst</li><li>Epoxy Emulsion Modified Engineered Cementitious Composite for Enhanced Pipeline Coating</li><li>Study on the Dense-Packing Effect and Properties of Multi-Component Cementitious Material</li><li>Machinability of Short Potassium Titanate Fiber Reinforced Aluminum Alloy Composites Fabricated by Squeeze Casting</li><li>Chapter 2. Chemical Materials and Technologies</li><li>The Effect of Silver and Silver-Platinum Doped Into 5A Zeolite on the Degradation of Naptalam</li><li>Preparation and Characterization of Au/Al₂O₃ and Au-Fe/Al₂O₃ Materials, Active and Selective Catalysts in Oxidation of Cyclohexene</li><li>
<i>In Situ</i> Growth of Zinc Oxide Nanoparticles on Cotton Fabric Using Sonochemical Method</li><li>Effect of Cold Rolling on Sensitization of 304 Stainless Steel Weldments</li><li>Synthesis, Characterization and Evaluation of Property Profile of Hybrid Ion- Exchanger</li><li>Preparation and Characterization of Activated Carbons Based on Lignocellulosic Residues</li><li>Experimental and Numerical Study of Plain-Woven Aramid Fabric</li><li>Preparation of Three Dimensional Products Using Flow Deformability of Wood Treated by Small Molecular Resins</li><li>Epoxidized Vegetable Oil as a Sustainable Ingredient in Welding Electrode Coatings</li><li>Contact Width Analysis of Corrugated Metal Gasket Based on Surface Roughness</li><li>Experimental Investigation on Nanofluids Effectiveness on Heat Transfer in Oscillating Heat Pipe</li><li>Deposition and Characterization of Electroless Ni-P/Ni-W-P Duplex Coating Using Electrochemical Impedance Spectroscopy</li><li>Experimental Study of Surface Roughness of Wood Plastic Composites after Turning</li><li>Utilization of Sulfur Waste from Petroleum Refinery for Sulfur Concrete</li><li>Conductivity and Transport Properties Study of Plasticized Carboxymethyl Cellulose (CMC) Based Solid Biopolymer Electrolytes (SBE)</li><li>Biosurfactant Producing Bacteria with Tensoactive and Emulsifying Properties Isolated from Palm Oil Mill Effluent</li><li>Enhanced Adsorption of Pb(II) on Chemically Treated Neem (<i>Azadirachta indica</i>) Leaf Powder</li><li>Chapter 3: Modelling and Analysis of Materials Properties and Technologies</li><li>Numerical Analysis of Nanoscale Junctionless MOSFET Including Effects of Hot-Carrier Induced Interface Charges</li><li>Cutting Simulations and Experiments of Milled SiC Particle-Reinforced Aluminum Matrix Composites</li><li>Validation of Nitinol SMA Characteristics Using Finite Element Analysis and Closed Form Solutions</li><li>Optimization of Process Parameters of Diffusing Bonding of Titanium with Titanium and Titanium with Copper</li><li>Multi Regression Analysis of Flow Curve Obtained by Torsion Test</li><li>Researches Concerning the Phenomena at the Interface for the Sintered Compacts of Titan-Hydroxyapatite</li><li>A Comparison among Polynomial Model, Reduced Polynomial Model and Ogden Model for Polyurethane Foam</li><li>Modeling and Simulation of Microwave Circuits</li><li>Numerical Simulation of Polyurethane Foaming Process Using Finite Point Method</li><li>Enhanced Efficiency of Au-Deposited BiFeO₃ Nanoparticles Based Dye-Sensitized Solar Cells</li><li>Numerical Investigation of the SiGe/Si Heterostructure Including Interfacial Defects for Photovoltaic Applications</li><li>Thickness Dependence of Structural and Optical Properties of Al/ZnO Films Prepared by DC Magnetron Sputtering</li><li>Investigation on the Structural Properties of a New Prepared 0.2PZS-0.8PLZT Ceramics</li><li>Residual Stress and Microstructures Characterization in Welded Al-Si-12Cu Alloy</li><li>Hydroxyapatite Deposition onto Ti-6Al-4V Surface in Powder Mixed Electrical Discharge Machining</li><li>Steady State Conduction Behaviour of Liquid Crystalline Polyurethane</li><li>Effect of Gate Dielectrics on the Performance of P-Type Cu₂O TFTs Processed at Room Temperature</li><li>CFD Study on the Role of Gas Friction on the Molten Layer Shape and Melt Removal Mechanism in Laser Cutting Process of Steel</li><li>Ti-6Al-4V Surfaces in SiC Powder Mixed Electrical Discharge Machining</li><li>Analysis of Strain Hardening Behaviour of Cast Aluminium Alloy 354 Subjected to Artificial Ageing at Various Temperatures</li><li>Effect of Melt Cooling Rate on Microstructure of Sn - Bi and Sn - Pb Eutectic Alloys</li><li>Analysis and Quantification of Grain Size of Various DHP Copper Tubes Manufacturing Processes</li><li>Evaluation of Mechanical Behaviour of Bone Cements by Using Acoustic Emission Technique</li><li>The Effect of Intercritical Deformation on Microstructure Development in Thermomechanically-Processed Low-Silicon TRIP-Assisted Steels</li><li>Evaluation of the Physical and Mechanical Properties of Ceramic Tiles Processed Using Steel Slag</li><li>Significant Atomic Displacement at Isostructural Transition in Li_0.99Cu_0.01CrO₂ and its Effects</li><li>Modification of some Optical and Mechanical Properties of Amorphous As-S-Se Thin Films by Copper Introduction</li><li>Chapter 4: Nanomaterials and Nanotechnologies</li><li>AFM Studies of Thin Films as Nanobiosensor for Early Detection of Prostate Cancer</li><li>Strength and Microstructural Performance of Nano-SiO₂ Gel (NSG) Infused Alkaline Activated Ground Blast Furnace Slag-Ultrafine Palm Oil Fuel Ash (AAGU) Based Mortar</li><li>Sol Gel Characterization of Nano Kaolin</li><li>Ultrafine Solid State Polymerized PA66 Nanofibers Fabrication via Air-Sealed Centrifuge Electrospinning (ASCES)</li><li>Structure and Magnetism of Fe/Al Nanostructures Grown by Ion-Beam Sputtering</li><li>Low Band Gap Co₈₀Ni₂₀@RGO Nanocomposite</li><li>Effect of Capping Agent on Physicochemical Properties of Zinc Substituted Nanoscale Hydroxyapatite</li><li>Castor Oil Based Polyurethane Nanocomposites with Cellulose Nanocrystallites Fillers</li><li>Enhancement in Thermal Property of Phase Change Microcapsule with Modified Carbon Nanotube</li><li>Chapter 5: Advances in Energy Technology</li><li>Enhancing Biogas Production from Sugarcane Bagasse Using Steam Explosion in According With Acetic Acid Pretreatment</li><li>Biogas Production from Napier Grass (Pak Chong 1) (<i>Pennisetum purpureum</i> x <i>Pennisetum americanum</i>)</li><li>Effect of Building Management System on Energy Saving</li><li>The Effect of Mixing Coal with Biomass in Solid Fuel Briquettes</li><li>Prediction of the Remaining Service Life of Superheater and Reheater Tubes in Coal-Biomass Fired Power Plants</li><li>Study on the Performance of the Organic Rankine Cycle System with Internal Heat Exchanger under Vehicle Engine Various Operating Conditions</li><li>Chapter 6: Applied Mechanics and Mechanical Engineering</li><li>Current Mode Filters Using Current Feedback Amplifiers with Negative Impedance (Resistance)</li><li>VPP Processed Variable Phase Controller for Array Antenna Scanning</li><li>Numerical Simulation of the Mechanical Structure of a Helmet Motorcyclist</li><li>The Stress Field in a Flexed Beam with an Elastoviscoplastic Behavior</li><li>The Chip in the Up and Down Milling Process</li><li>Creep Behavior of Catheter Reinforced with Braids: Analytical Simulation of Uniaxial Tension under Two-Stage Step Stress</li></ul>