Advances of Computational Mechanics in Australia

Preface, Conference Organizers
Using Meridional Streamline and Passage Shapes to Generate Radial Turbomachinery Geometry and Meshes
Natural Convection of Air through an Asymmetrically Heated Vertical Channel with a Baffle
A Numerical Procedure for Modelling the Thermal Performance of Ventilated Hollow Core Slabs
Effect of Slit Inclusions in Drag Reduction of Flow over Cylinders
CFD Analysis of Early Diaphragm Removal in Expansion Tubes
A Multigrid Accelerated Code for Simulating Unsteady Conjugate Natural Convection Boundary Layers
Exergy Analysis of Data Centres-Effect of the Rack Location and Airflow Direction on the Thermal Performance
Micro-Scale Flow Simulations and Permeability Estimation of Cleat Networks in Coal
The Influence of Incoming Boundary Layer on the Flow around the Surface Excrescence
Implementation of a Compressible-Flow Simulation Code in the D Programming Language
RANS Modelling of Shock-Wave Boundary Layer Interaction in a Mixed Compression Axisymmetric Hypersonic Intake
Validating the k-? Turbulence Model for 3D Flows within the CFD Solver Eilmer
Smoothed Particle Hydrodynamics into the Fluid Dynamics of Classical Problems
A Comparative Aerodynamic Investigation of a 20 degrees SAE Notchback Model
CFD Simulation of a Supercritical Carbon Dioxide Radial-Inflow Turbine, Comparing the Results of Using Real Gas Equation of Estate and Real Gas Property File
CFD Simulation of CO2 Dispersion in a Real Terrain
Analysis of ZDDP Films on Sticking Defects by FEM during Hot Rolling of Ferritic Stainless Steel Strips
Numerical Investigation on Fracturing of Rock under Blast Using Coupled Finite Element Method and Smoothed Particle Hydrodynamics
A Voronoi Cell Material Point Method for Large Deformation Solid Mechanics Problems
Comparative Studies of Base Isolation Systems Featured with Lead Rubber Bearings and Friction Pendulum Bearings
Numerical Analysis and Parametric Study of Phononic Band Gap Structures
Numerical Modelling of Degradation of Cement Paste under External Sulfate Attack
Computational Modelling of Closed-Cell Aluminium Foams to Investigate Structural Deformation under Quasi-Static Loading
Numerical Modelling of Mechanical Behaviour of Fibre Reinforced Cementitious Composites
Simulation of Multipass Hot Rolling for 7050 Aluminum Alloys
Modelling of Auxetic Foam Embedded Brittle Materials and Structures
Experimental and Analytical Investigation of Hypersonic Fluid-Structure-Interactions on a Pitching Flat Plate Airfoil
Calibration of Dissipative Particle Dynamics Method to Study Rheology of Dense Suspensions
Development of a Fluid-Structure Model for Gas-Lubricated Bump-Type Foil Thrust Bearings
The Evaluation of Dynamic Response of Reservoir - Gravity Dam-Foundation System Using SBFEM
Thermal Buckling and Postbuckling Analysis of Functionally Graded Carbon Nanotube-Reinforced Composite Beams
Nonlinear Vibration Analysis of a Dielectric Elastomer Based Microbeam Resonator
Atomistic Study for the Vibrational Properties on ?5 Symmetric Tilt Bicrystal Copper Nanowires
Rotor Vibration under the Coupled Effects of Mass Unbalance and Asymmetric Bearings
Numerical Investigation on the Failure Behavior of Brittle Granular Chain under Impact
Numerical Simulation of Aluminum Honeycomb Subjected to Combined Compression-Shear Loads
Numerical Considerations for the Implementation of a Comprehensive Composite Damage Model
Monitoring the Dynamic Behaviour of Concrete Bridges Using Non-Contact Sensors (IBIS-S)
Simulating Post Punching Behaviour of RC Slab-Column Connections Using a Micro Model
Numerical Investigation of Hammer Erosive Wear due to Particle Impact
Coupling Effects of Chloride Penetrating and Corrosion Damage Evolving Process in Concrete under Marine Environment
Finite Element Modeling of Bolted Cold-Formed Steel Storage Rack Upright Frames
Nonlinear and Hysteretic Modelling of Magnetorheological Elastomer Base Isolator Using Adaptive Neuro-Fuzzy Inference System
A New Approach for Determination of the Attenuation Bandwidth of a Resonating Metamaterial
Two-Layer Red Blood Cell Membrane Model Using the Discrete Element Method
The Biomechanical Responses of Mandibular Bone Installed with Fixed Partial Denture
On Application of the Third Medium Contact Method in Analysis of Geotechnical Problems
Finite-Temperature Multiscale Simulations for 3D Nanoscale Contacts
Simulating the Contact of Golf Club to Ball for Improved Performance
Numerical Analysis of Normal Contact Stiffness of Rough Surfaces
Hertz Contact at the Nanoscale with a 3D Multiscale Model
A Review of Skin Buckling Theory in Composite Members
Analysis of Gear Strength by Static and Dynamic Finite Element Methods
Effect of Ground Mineralogy on Energy Pile Performance in Dense Sand
On Application of the Maximum Entropy Meshless Method for Large Deformation Analysis of Geotechnical Problems
Simulations of Fall Cone Test in Soil Mechanics Using the Material Point Method
A Simplified Kinematic Method for 3D Limit Analysis
Investigation of Point Load Index Using Novel Discrete Based Model
Dynamic Analysis of Unsaturated Soils Subjected to Large Deformations
A Continuum Model with an Embedded Fracture Process Zone Modelled as a Cohesive Frictional Interface
Investigating the Failure Mode during Crack Propagation Using Image Analyses
Enriched Finite Element for Modelling Variable Boundary Conditions in Unsaturated Seepage Problems
A u-p Formulation for Fully Coupled Dynamic Analysis of Flow and Deformation in Unsaturated Soils
Probabilistic Reliability Assessment of Slope Stability Problems with Genetic Algorithms
Assessment of a Method to Model 2D Discontinuities with Enriched Finite Elements and Level Sets
Discrete Modelling of Soil-Inclusion Problems
A Fractional Generalised Finite Difference Method to Linear Porous Media Dynamics
Meshfree Method Analysis of Biot's Consolidation Using Cell-Based Smoothed Point Interpolation Method
Alternative Mesh Refinement Methods for Analysing Soil Penetration Problems
Parametric Study on the Approach Problem of an Integral Abutment Bridge Subjected to Cyclic Loading due to Temperature Changes
Assessment of the Mechanical Behaviour of Granular Media by DEM-Based True Triaxial Tests
Dynamic Response of Shear Deformable Functionally Graded Porous Beams
Finite Element Simulation for Nonlinear Finite Element Analysis of FRP Strengthened RC Beams with Bond-Slip Effect
Numerical Study of Basalt Fibre Cloth Strengthened Structural Insulated Panel under Windborne Debris Impact
Numerical Investigation of a Hybrid FRP-Geopolymer Concrete Beam
Blast Resistance of Hybrid Elastomeric Composite Panels
A Numerical Investigation of the Performance of a Nacre-Like Composite under Blast Loading
Influence of Architecture and Orientation in 2-Layers Fabric Structures
Influences of Material and Geometry in the Performance of Auxetic Composite Structure under Blast Loading
The Effect of Non-Local Approach in Simulating Cross-Weld Tensile Test Specimen
XFEM Fracture Modelling for Implant-Supported Fixed Partial Dentures
A Hypersonic Aircraft Optimization Tool with Strong Aerothermoelastic Coupling
Effective Thermal Conductivity of Submicron Powders: A Numerical Study
The Research of Calculation Method on Vertical Natural Frequency of the New Full-Prefabricated Floor
A Non-Intrusive Polynomial Chaos Method to Efficiently Quantify Uncertainty in an Aircraft T-Tail
A Lagrangian Coupling Approach for the Combination of Finite-Discrete Element Method
A Numerical Study of Micro Hydro Deep Drawing of SUS304 Sheets
Representative Volume Element-Based Modelling of Closed-Cell Aluminum Foams
SIMP for Complex Structures
Topological Design of Stiffener for Static Bending of Stiffened and Sandwiched Plates
Geometric Bounds for Buckling-Induced Auxetic Metamaterials Undergoing Large Deformation
Ultrasonic Imaging of a Crack Using Modified Time Reversal
Identification of Nonlinearities Using Computational Approaches
Numerical Simulations of 3D Metallic Auxetic Metamaterials in both Compression and Tension
Design and Fabrication of Structural Connections Using Bi-Directional Evolutionary Structural Optimization and Additive Manufacturing
Wear Particle Analysis and the Evolution of the Plastically Deformed Layer on Australian Rail Steel
Pore Characterisation in Monodisperse Granular Assemblies
A Study of Abrasive Wear on High Speed Steel Surface in Hot Rolling