Advanced Synthesis and Processing Technology for Materials

Sponsors, Committees, Preface
Ceramics
Investigation of Curing Process on Melt Spun Polymethylsilsesquioxane Fiber as Precursor for Silicon Oxycarbide Fibers
Synthesis of SiC Based Fibers with Continuous Pore Structure by Melt- Spinning and Controlled Curing Method
Effect of Nd2O3 and Sm2O3 on the Microstructure and Electrical Properties of WO3 Capacitor-Varistor Ceramics
The Effect of Particle Morphology and Particle Size Distribution on the Property of Slip Casting SiC
Preparation and Thermoelectric Properties of Bi-Doped Mg2Si Nanocomposites
The Effect of Water-Soluble Plasticizer on Barren Raw Material Hard Plastic Extruding Course
Stoichiometric Controlling of Spark Plasma Sintered Boron-Carbon Ceramics
Optimal Design for Ceramic Radomes with A-Sandwich Structure
Effect of Bi Doping on the Thermoelectric Properties of Mg2Si0.5Sn0.5 Compound
Effect of CaO on Sintering and Crystallization of CaO-Al2O3-SiO2 System Phosphorus Slag Glass-Ceramic
Reinforcement of B4C Ceramics with Multi-Walled Carbon Nanotubes
Damping Properties and Mechanism of 0-3 PMN/CB/EP Composites
Field-Assisted Isothermal Oriented Crystallization of SrO-TiO2-SiO2 Polar Glass-Ceramics
Structure and Property of Ti-Al-C/TiB2 Composite Ceramics
Synthesis, Characterization and Catalytic Properties of La4BaCu5-xNixO13+? (x=0, 1, 2, 3, 4, 5)
Oxidation of ZrB2/ZrO2 and ZrB2/ZrO2/SiC Ceramics
Molten Salt Synthesis and Photoluminescence of YVO4:Eu Microcrystalline Phosphors
Synthesis, Characterization and Electromagnetic Wave Absorption Properties of Z-Type Hexaferrites Prepared by Molten Salt Method
Carbothermal Reduction and Nitridation Synthesis of ?-AlON Powder under High Heating Rate
Synthesis of Ultra-Fine ZrB2 Powder by Borothermal Reaction under High Heating Rate
Microstructure and Properties of Mulite-FeCr Multifunctional Composite
Effect of Sintering Temperature on the Properties of Porous Silicon Nitride Ceramics
Effects of Coated Nano-BN Particles on Microstructure and Properties of BN-AlN Composite
Erosion Resistance of Al2TiO5/Al2O3 Composites to Molten Aluminum
Fabrication of Indium Tin Oxide Targets by Spark Plasma Sintering and Hot-Pressing Sintering
Superfast Sintering of Nanocrystalline Y2O3 Ceramics
Low-Temperature Sintering and Microwave Dielectric Properties of the Zn2SiO4 Ceramics
Thermal Shock-Resistance Performance of Al2TiO5/Al2O3 Composites
Effect of LaCl3 on the Properties of LAS Ceramics
Preparation of Fine Mullite Powder in a SHS Chemical Furnace System
Low Dimensional Materials
Investigation of Bipolar Resistance Switching Properties in SrTiO3 Thin Films with Symmetric Electrodes Structure
The Effect of Oxygen Annealing on the Resistance Switching Properties of the La0.7Ca0.3MnO3 Films
Fabrication and Resistance-Switching Behaviors of NiO Thin Films by Thermal Oxidation of Evaporated Ni Films
Synthesis of Metastable Tungsten Carbide Nanoparticles by Mechanochemical Alloying Process
The Rheological Characterization of the Writing Performance of Carbon Black Gel Ink
Effect of Surfactant on the Properties of Gel Ink
Nickel Induced Lateral Crystallization of Amorphous Silicon Film by Electroless Planting
Study on the Oxidation Resistance of 316 Stainless Steel Nano-Powder Prepared by Ball-Milling Method
Controlled Growth of SnO2 Micro/Nanocrystals with Different Morphologies via a Solution Method
Synthesis and Characterization of Silver Nanowires by Solvothermal
Thermal Decomposition and Flame Retardance Behavior of Nanometer Magnesium Oxychloride Crystal Salt Involved in SMC
Structure and Up-Conversion Luminescence Properties of Er3+-Yb3+Co-Doped TiO2 Nanocrystals Prepared by Sol-Gel Method
Controlled Synthesize of BaTiO3 Nanoparticles and BaCO3 Nanowires through the Reverse Micelle System
Effect of Processing Parameters on the Microstructure of Silicon Nitride Coatings by Chemical Vapor Deposition
Graphitic N-Free/N-Doped Nanostructured Carbon Molecular Sieves via CVD Method and their Hydrogen Storage
Laser Energy Dependent Structure of Pulsed Laser Deposited Barium Dititanate Films
Synthesis and Performance of Nanocrystalline 5083 Aluminum Alloy Powders by Cryomilling
Preparation of the Boron Nitride Fibers by Chemical Reaction
Materials with Designed Structure
(TiB2)pNi/Ni3Al/Metals Graded Materials Prepared by the Field-Activated and Pressure-Assisted Combustion Process
Impact of Carbon Nanotube Aspect Ratio and Dispersion on Epoxy Nanocomposite Performance
Preparation and Characterization of Pt/YSZ Composite Electrode
Laser Cladding of Zr52.5Cu17.9Ni14.6Al10Ti5/TiC Composite Coating on AZ91D Magnesium Alloy for Improvement of Wear Resistance
A New Process for Highly Effective Utilization of Industrial Solid Wastes - Sialite Technology
Study on Low-Temperature Sintering of Microwave Dielectric Ceramics by Sol-Coating Method
Synthesis of Carboxylic Acids Intercalated Mg-Al Layered Double Hydroxides by a Modified Reconstruction Method
Effect of Hydrogen Peroxide on TiB2-Based Materials
Preparation and Characterization of the Coated ZrB2 @ ZrO2 Ceramic
Preparation and Characterization of Polyaniline/PMN Composite by In Situ Polymerization Method
Dielectric Properties of PMN/CB/CIIR Composites
The Effect of Particle Size on the Electromechanical Properties of PZT/PVDF
Preparation of TC4-LY12 Joint by Vacuum Diffusion Welding
Fabrication of Mg-W System FGM with Density Gradient by Hot-Press Sintering
Quasi-Isentropic Compression Characters of Flier-Plates with Graded Impedance
Influence of Buffer Layers on the Structure and Optical Properties of Na-Doped ZnO Thin Films Prepared by Sol-Gel Method
Preparation of ZrC Powder by Self-Propagating High-Temperature Synthesis
Preparation of Mg-Cu Composite by Tape Casting and Hot-Pressing
Numerical Simulation of Dominating Control Factors of Thermal Protection FGM's Effective Thermal Conductivity
Spark Plasma Sintering Process of Fe-6.5%Si Alloy from Fe and FeSi Powders
Study on Electrical Properties of Carbon Fiber Reinforced Cement Paste with CCCW
The Effect of Surface Hydroxyl Groups on the Properties of SR/Al2O3 Composites
Synthesis of Co2O4 Microspheres by Hydrothermal-Precipitation for Electrochemical Supercapacitors
Preparation and Characterization of Novel Functional Gradient Syntactic Foam
Effect of Sintering Schedule on the Microstructure of Carbon Nanotubes Reinforced Alumina Fabricated by SPS Method