Advanced Ceramics and Novel Processing

Preface, Committees and Sponsors
Advanced Ceramics
Synthesis and Characterization of Hafnium Carbide Based Ceramics
Grain Boundary Segregation-Induced Phase Transformation and Grain Growth in Y2O3-Stabilized ZrO2 Polycrystals
A Model for Estimating Internal Stress during Sintering of Ceramic Multiphase Laminates
Fabrication of Nitride Ceramics by Electric Current Assisted Sintering
Effect of Initial Alpha-SiC Content on Thermal Conductivity of Silicon Carbide Ceramics
Fabrication of Carbon Nanotube Reinforced Boron Carbide Composite by Hot-Pressing Following Extrusion Molding
Consolidation of SiC Powder Coated with SiO2 Nanolayer by Spark Plasma Sintering
High-Speed Deposition of SiC Thick Film by Halide Precursor
Lamellar and Rod-Like Eutectic Growth of TiB2-TiC-TiN Composites by Arc-Melting
Preparation of Zirconium Phosphate Bonded Silicon Nitride Ceramic Coatings by Cold Spray and Presureless Sintering
Consolidation of Titanium Carbide with Zirconium Carbide by Spark Plasma Sintering
Influence of the Process Temperature of Spark Plasma Sintering on Micorsturcture and Nanoindentation Hardness/Young's Modulus of WC-8wt%Co
Effect of pH on the Microstructure and Purity of Copper-Coated Tungsten Composite Powders Prepared by Electroless Plating
Fabrication and Properties of W-Cu Functionally Graded Material by Tape-Casting
Synthesis of S and N Co-Doped Mesoporous Titanium Oxideby Anodization Processs
A Wettability Tunable Surface of Nafion (R) with Controlling the Flip-Flop Property by DC Applied Voltage
Interlayer Surface Modification of Layered Perovskite HLaNb2O7?xH2O with Diol Compounds Possessing Ethylene Oxide Chains
TL Properties of Pure Al2O3 Grown by the Micro-Pulling down Method
Optical and Scintillation Properties of Cr Doped Y3Ga5O12 Crystal for Infra-Red Scintillators
Growth and Luminescence Properties of Ce and Ca Co-Doped LiGdF4-LiF Eutectic Scintillator
Effect of Annealing Temperature on Structure and Mechanical Property of Magnetron Sputtered c-BN Films
Electroceramics
Engineering of Lead-Free Piezoelectrics in Alkali Niobate Ceramic System: Improvement in Density by Two-Step Mixing Process
Iron Composite Anodes for Fabricating All-Solid-State Iron-Air Rechargeable Batteries
Chemical Reactivity and Cathode Properties of LaCoO3 on Lanthanum Silicate Oxyapatite Electrolyte
Preparation of Layered Double Hydroxide and its Graphene Composite Films as Electrodes for Photoelectrochemical Cells
Mesoporous Hollow Carbon Derived from Soft-Templated Hydrothermal Process for Supercapacitor Electrode
Highly (004)-Oriented Texture of ?-LiAlO2 Films by Laser Chemical Vapor Deposition
Effects of ZnO Addition and Sintering Temperature on Dielectric Properties of MgTiO3 Ceramic
Dielectric Properties and Optical Absorption of Single-Crystalline BaTi2O5 Synthesized Using High-Purity BaCO3 as Source Material
Preparation and Electrical Property of Calcia Stabilized Zirconia Ceramics
Preparation and Study of (1-m)(Mg0.8Zn0.2)TiO3?m{Ba4Nd28/3Ti18O54?0.18Bi2O3} Microwave Dielectric Ceramics
Enhanced Thermoelectric Properties of Mg2Si0.3Sn0.7 Compounds by Bi Doping
Effect of Oxygen Flow Rate on Electrical and Optical Properties of ATO Thin Films Prepared by RF Magnetron Sputtering
Novel Processing
Synthesis of A-Type Zeolite from Flat Glass Recycle by Hydrothermal Treatments and its Evaluation

In Situ Observation of Diamagnetic Fluid Flow in High Magnetic Fields
Spark Plasma Sintering and Characterization of WC-Co-cBN Composites
Fabrication of Porous Al with Controlled Pore Size by Spark Plasma Sintering
Densification of Nanocrystalline Ceramics by Combustion Reaction and Quick Pressing
Microstructure and Properties of Aluminum-Copper Composites Prepared by Hot-Pressure Sintering
Effect of Al2O3 on Microstructure and Ionic Conductivity of Li7La3Zr2O12 Solid Electrolytes Prepared by Plasma Activated Sintering
Microstructure of LiAl5O8 and LiAlO2 Films Prepared by Laser CVD
Effects of C/Si Ratio on the Structure of ?-SiC Film by Halide CVD
Surface Modification of Silicon Carbide Powder with Silica Coating by Rotary Chemical Vapor Deposition
Synthesis and Evaluation of Fe Nanowire and Nanorod by Electro-Chemical Process
Preparation and Density Control of PMMA Microcellular Foams via Supercritical Carbon Dioxide Foaming
Perpendicular Magnetic Anisotropy in Pt/Co/AlO Trilayer Structures Depending on AlO Thickness and Fabrication Method
Materials Characterization
Synthesis and Characterization of Dense Mesoporous Alumina
Precipitate Phases and Mechanical Properties of Heat-Treated ASTM F 90 Co-Cr-W-Ni Alloy
Microstructural Analysis of Biomedical Co-Cr-Mo Alloy Subjected to High-Pressure Torsion Processing
Effect of Subsurface Deformation on Sliding Wear Behavior of Ti-29Nb-13Ta-4.6Zr Alloys for Biomedical Applications
Effect of Al Thin Film on Microstructure and Mechanical Properties of Diffusion-Bonded LY12/TC4 Joints
Effect of Holding Time on Microstructure and Mechanical Properties of Diffusion-Bonded Mg1/Pure Ag Foil/1060Al Joints
Diffusion Mechanism and Kinetics of Diffusion Bonded Mg/Ni/Al Joint
Dynamical Structure Factor of Magnetic Excitation in Underdoped La1.90Sr0.10CuO4 Measured by Chopper Neutron Spectrometer
Effects of Oxygen Reduction and Ce-Doping on Magnetic Order in T'-Pr1.40-xLa0.60CexCuO4+??? Studied by ?SR Measurement
Investigation of Excitation Mechanism of Cu II Lines under Different Atmospheres
Effect of Cryomilling on Microstructure and Bonding Mechanism of Mg/B Composite Powders
Pyrolysis Behavior of Boron-Containing Phenol-Formaldehyde Resin (BPFR) Modified by B2O3