Advanced Materials Research V

Preface, Committees and Sponsor
Chapter 1: Composites and Specialized Composites
Investigation of Thermal and Rheological Properties of Polypropylene and Montmorillonite (MMT) Nanocomposites
Mechanical and Tribological Behavior of Bio Polymer Matrix Composites for Biomedical Prosthesis Applications
Properties of the Ti Void Metal Composites Prepared with Saccharose as a Space Holder and Coated by Hydroxyapatite
MoS2: Advanced Nanofillers for Polymer Nanocomposites
Durability Performance of Cement Composites Containing Ground Granulated Blast Furnace Slag
Possibilities of Using Alternative Materials as a Substitute Binder or Filler into Composites
Finite Element Analysis of the Mechanical Behaviour of a Reinforced PMMA-Based Hip Spacer
A Comparison Study of Bonded Composite Repairs of Through-Wall Cracks in Pipes Subjected to Traction, Bending Moment and Internal Pressure
Polyethylene/Clay Nanocomposites Prepared in an Internal Mixer: Effect of Processing Variable on Mechanical Properties
Fabrication and Characterization of Biocomposite Using Grewia Optiva Fibre (i.e. Bhimal) Reinforced Polyvinyl Alcohol (PVA)
Effect of Bentonite and Zinc Borate (ZB) Addition on Recycled Polypropylene Composites against Tensile and Burning Rate Properties
High and Low Speed Impact Characteristics of Nanocomposites
Chapter 2: Intelligent and Electronic Materials, Magnetic Materials
Monte Carlo Simulation Model for Magnetron Sputtering Deposition
Effects of Sputtering Pressure on Cu3N Thin Films by Reactive Radio Frequency Magnetron Sputtering
The Role of Twinned and Detwinned Structures on Memory Behaviour of Shape Memory Alloys
Energy Loss Analysis and Magnetic Properties of Non-Oriented Electrical Steel Cut through Different Technologies
Fabrication of Hierarchical Flower Shaped PbS Crystals via Hydrothermal and Microwave Routes
Effect of Cutting Parameters on the Quality of the Machined Surface of Cu-Zn-Al Shape Memory Alloy, SMA
Modeling of Sheet Carrier Density, DC and Transconductance of Novel InxAl1-XN/GaN-Based HEMT Structures
Evaporation of Thin Film of Polar Liquid in Presence of Soluble Surfactant
Anomalous Effect on the Phononic Thermal Conductivity of Silicene Nanoribbon by Hydrogenation
Chapter 3: Optics and Solar Materials
Solar Reflective Pigment of TiO2 Nanoparticle Coated on Mica and Thermal Property of its Isolation-Heat Paint
Influence of Substrate Temperature on the Optoelectronic Properties of CuPc Thin Film
CdTe/PbTe Superlattice Energy Bands Analysis Using k.p Method
Parametric Requirements for Optimum Performance of InGaP/GaAs Heterojonction Solar Cell
Design of a New-Type Electro-Optical Sensor Based on the Total-Internal Reflection Theory in Heterodyne Interferometry
Synthesis of Anatase and Rutile TiO2 Crystals for High-Performance Dye-Sensitized Solar Cells
Chapter 4: Novel Researches on Machining and Processing of Materials
Effect of Asymmetric Rolling with Cone-Shaped Rolls on Microstructure and Tensile Properties of Low-Carbon Steel
Obtaining and Trademark of Copper Molybdenum Oxide from the CuMoO4 Sample Using Carbon as a Reducing Agent
Influence of Spindle Speed on Exit Burr Height in Drilling Forging Brass
Grinding of Austempered Ductile Iron Grade 3 as Function of the Microcrystalline Al2O3 Grinding Wheels Composition
Effect of Addition of Some Grain Refiners to Zinc-Aluminum 22, ZA22, Alloy on its Grain Size, Mechanical Characteristics in the Cast and after Pressing by the Equal Channel Angular Pressing, ECAP
A Study on Mechanical Properties of Friction Stir Welded and Electron Beam Welded AA2195 Sheets
Investigation on the Effect of Geometrical Shape of Cold Direct Extrusion on Commercially Pure Aluminum Alloyed by 4% Cu
Electrospun Gelatin Fiber Bundles by Self-Bundling Electrospinning
Cube Texture Formation in Ni-8at.%W Alloy Substrates Effected by the Initial Grain Size of Ingot
Chapter 5: Synthesis and Characterization of Materials
Preparation and Characterization of Hydrogels Based on Chitsoan/Polyvinyl Alcohol Blends
An Experimental Investigation on Specific Heat Capacity and Enthalpy of Al 6061-SiC-Gr Hybrid Metal Matrix Composites Using Differential Scanning Calorimetry
Synthesis, Characterization, and Antimicrobial Activities of New Organic-Inorganic Hybird Compound Based on Polyoxovanadate and Metal-Schiff-Base Complex
The Synthesis and Structure of Anodized Titania Nanotubes for Energy Conversion Materials
UV-Assisted Synthesis of Silver Nanoparticles Using Poly(Acrylic Acid) for Colorimetric Ammonia Sensing
Synthesis and Characterization of Modified Polydimethylsiloxane Nanomembrane for Chiral Separation
Blunt V-Notch Brittle Fracture: An Improved Finite Fracture Mechanics Approach
Numerical Modelling of the Interaction Macro-Multimicrocracks in a Pipe under Tensile Stress
Chapter 6: Nanotechnologies: Nanofluids, Nanoribbon, Nano Thin Films
Heat Transfer and Pressure Drop in a Pin Fin Heat Sink Using Nanofluids as Coolant
Tilted Microlens Fabrication Using Nano-Magnetic Particles
Interfacial and Demulsification Properties of Janus Type Magnetic Nanoparticles
Size-Dependent Photoelectrochemical Properties of Nanostructured WO3 Thin Films Synthesized via Electrodeposition Method
Ultrananocrystalline Diamond/Amorphous Carbon Composite Films Prepared by Laser Ablation of Graphite in Nitrogen and Hydrogen Atmosphere
Thermal Conductivity of Silicon-Graphene Nanoribbon (SiGNR): An Equilibrium Molecular Dynamics (EMD) Simulation
Molecular Dynamics Simulation of the Thermal Conductivity of Silicon-Germanene Nanoribbon (SiGeNR): A Comparison with Silicene Nanoribbon (SiNR) and Germanene Nanoribbon (GeNR)
Chapter 7: Researches on Materials Science and Technology
2-(Methacryloyloxyethyl) Trimethyl Ammonium Chloride Grafted onto Natural Rubber in Latex State
Nonlinear Multiresponse Parameter Estimation Using Simplex Optimization Method
Effect of Biogas Volume Flow Rate and Burner Temperature on Moisture Content of Organic Fertilizer in a Rotary Drying Process
Electroactive Polymer Actuator Based on PVDF and Graphene through Electrospinning
Improvement of Geotechnical Characteristics of Clay Soils Using Lime
Physical Parameters Affecting on the Electrode Performance for Proton Exchange Membrane Fuel Cells (PEMFCs)
Plastic Waste in Cement Concrete, LDPE and PVC Introduction Effect
Wettability-Based Colorimetric Test Strips for Gasoline/Oil Mixture Differentiation
A New Organic-Inorganic Hybrid Based on L-Arginine and Polyoxoanion
Improvement and Control of Cement Slurry Formulation Resistant to the Critical Conditions HPHT
Fly Ash/Blast Furnace Slag Geopolymer Repair System as a Sustainable Solution for the Maintenance of an Existing Bridge: Materials Design and Influence on Shear Capacity under Seismic Conditions
Enhancement of Surface Properties on Films of Waterborne-Polyurethane Hybridized by Highly Dispersed and Aluminate-Modified Silica Sol
Utilization of Geosynthetic Material Interfaces for Reduction of Cyclic Motion Induced Accelerations
Use of Graphene Oxide as a Bitumen Modifier: An Innovative Process Optimization Study
Geometrically Non-Linear Free Vibration of Fully Clamped FGM Skew Plates Using Homogenization Technique
Notcheffect on J and Amplification of Anisotropic Stress Concentration Factor in a Laminated Plate Subjected to Tensile Load
Adobe Bricks: The Best Eco-Friendly Building Material
Evaluation of SEE on a 32-bit Microprocessor by Laser Test and Heavy Ion Test