Modeling and Dimensioning of Structures
An Introduction
1st Edition
Published on 6. June 2008
Book
Hardback
640 pages
978-1-84821-040-0 (ISBN)
Description
This book provides the main topics currently used for the calculus of structures. The reference establishes a link between the traditional approach on the strength of materials and the present finite element method, details the main aspects of practical modeling, and explores numerous case studies.
More details
Language
English
Place of publication
London
United Kingdom
Target group
Professional and scholarly
Product notice
sewn/stitched
Cloth over boards
Dimensions
Height: 231 mm
Width: 157 mm
Thickness: 46 mm
Weight
1202 gr
ISBN-13
978-1-84821-040-0 (9781848210400)
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
E-Book
03/2013
Wiley-ISTE
€266.99
Available for download
E-Book
01/2010
Wiley-ISTE
€266.99
Available for download
Persons
Daniel Gay was Director of the Laboratory of Mechanical Design at the University of Toulouse, France, for more than 15 years. He published numerous papers in international scientific journals and several books on composites materials. Jacques Gambelin is Professor of Mechanical Design at the University of Toulouse, France, and taught structural design andcalculus for aeronautical applications for more than 20 years.
Content
Preface xvii
Part 1. Level 1 1
Chapter 1. The Basics of Linear Elastic Behavior 3
1.1. Cohesion forces 4
1.2. The notion of stress 6
1.2.1. Definition 6
1.2.2. Graphical representation 7
1.2.3. Normal and shear stresses 8
1.3. Hooke's law derived from a uniaxially applied force 9
1.3.1. The stretch test 9
1.3.2. Linear mechanical behavior 12
1.3.3. Elastic mechanical behavior 12
1.3.4. Interpretation of the test at a macroscopic level 13
1.3.5. Interpretation of the test at a mesoscopic level 13
1.3.6. Interpretation of the test at a microscopic level 16
1.3.7. Summary 18
1.4. Plane state of stresses 20
1.4.1. Definition 20
1.4.2. Behavior relationships for state of plane stresses 22
1.4.3. Summary 35
1.5. Particular case of straight beams 36
1.5.1. Preliminary observations 36
1.5.2. Effects linked to the resultant forces and moments 38
Chapter 2. Mechanical Behavior of Structures: An Energy Approach 51
2.1. Work and energy 51
2.1.1. Elementary work developed by a force 51
2.1.2. Elementary work developed by a moment 52
2.2. Conversion of work into energy 53
2.2.1. Potential energy of deformation 53
2.2.2. Potential energy for a spring 55
2.3. Some standard expressions for potential deformation energy 58
2.3.1. Deformation energies in a straight beam 58
2.3.2. Deformation energy under plane stresses 74
2.4. Work produced by external forces on a structure 81
2.4.1. Beam under plane bending subjected to two forces 82
2.4.2. Beam in plane bending subject to "n" forces 99
2.4.3. Generalization to any structure 103
2.4.4. Summary 112
2.5. Links of a structure with its surroundings 113
2.5.1. Example 113
2.5.2. Generalization 118
2.6. Stiffness of a structure 119
2.6.1. Preliminary note 119
2.6.2. Stiffness matrix 121
2.6.3. Examples 121
2.6.4. Influence of the positioning 125
2.6.5. Deformation energy and stiffness matrix 139
Chapter 3. Discretization of a Structure into Finite Elements 143
3.1. Preliminary observations 143
3.1.1. Problem faced 143
3.1.2. Practical obtaining of the deformation energy for a complex structure 144
3.1.3. Local and global coordinates 147
3.2. Stiffness matrix of some simple finite elements 153
3.2.1. Truss element loaded under traction (or compression) 153
3.2.3. Beam element under plane bending 168
3.2.4. Triangular element for the plane state of stresses 178
3.3. Getting the global stiffness matrix of a structure 191
3.3.1. Objective 191
3.3.2. Mechanism of the assembly of elementary matrices 191
3.3.1. Introduction 201
3.4. Resolution of the system {F}={K}??{d} 203
3.4.1. Linkage conditions 203
3.4.2. Generalization of the method 205
3.5. Different types of finite elements available in industrial software 207
Chapter 4. Applications: Discretization of Simple Structures 209
4.1. Stiffness matrix of a spring 209
4.1.1. Helical spring 209
4.1.2. Spiral spring. 211
4.2. Assembly of elements 213
4.2.1. Example 1 213
4.2.2. Example 2 217
4.2.3. Example 3 222
4.2.4. Assembly of a truss element and a beam element under simple plane bending 228
4.3. Behavior in the global coordinate system 232
4.3.1. Plane assembly of two truss elements 232
4.4. Bracket 246
4.4.1. Objectives 246
4.4.2. Modelizing 247
4.4.3. Calculation of the elementary stiffness matrix in the global system 252
4.4.4. Assembly of the global stiffness matrix [K]str 256
4.4.5. Establishing the linkage and loading conditions 259
4.4.6. Resolution of the linear system Fstr = [K]strdstr 260
4.4.7. Additional study of the behavior of the bracket 262
4.4.8. Using computing software 267
Part 2. Level 2 269
Chapter 5. Other Types of Finite Elements 271
5.1. Return to local and global coordinate systems 271
5.1.1. Transfer matrix 271
5.1.2. Summary 273
5.2. Complete beam element (any loading case) 274
5.2.1. Preliminary comments 274
5.2.2. Obtaining the stiffness matrix in the local coordinate system 276
5.2.3. Improvement in performances of this beam element 283
5.2.4. Summary 288
5.3. Elements for the plane state of stress 291
5.3.1. Triangular element 291
5.3.2. Quadrilateral element in plane state of stress 295
5.4. Plate element 300
5.4.1. Preliminary notes 300
5.4.2. Resultant forces and moments for cohesion forces 302
5.4.3. Plate element in bending 305
5.4.4. Complete plate element 310
5.5. Elements for complete states of stresses 315
5.5.1. Preliminary notes 315
5.5.2. Solid tetrahedric element 318
5.5.3. Solid parallelepipedic element 321
5.6. Shell elements 327
5.6.1. Preliminaries 327
5.6.2. Specific case of axisymmetric shells 328
5.6.3. Axisymmetric shell element with axisymmetric boundaries 329
Chapter 6. Introduction to Finite Elements for Structural Dynamics 331
6.1. Principles and characteristics of dynamic study 332
6.1.1. Example 1 332
6.1.2. Example 2 338
6.2. Mass properties of beams 346
6.2.1. Finite beam element in dynamic bending plane 346
6.2.2. Discretization of a beam for dynamic bending 350
6.2.3. Other types of dynamic behaviors of a beam 357
6.3. Generalization 363
6.4. Summary 364
Chapter 7. Criteria for Dimensioning 365
7.1. Designing and dimensioning 365
7.2. Dimensioning in statics 370
7.2.1. The two types of criteria 370
7.2.2. Elasticity limit criterion 373
7.2.3. Non-rupture criterion 382
7.3. Dimensioning in fatigue 393
7.3.1. Fatigue phenomenon 393
7.3.2. Fatigue test 394
7.3.3. Modeling of the fatigue 397
7.3.4. Estimation of fatigue strength 399
Chapter 8. Practical Aspects of Finite Element Modeling 407
8.1. Use of finite element software 407
8.1.1. Introduction 407
8.1.2. Summary tables of the properties of elements 408
8.1.3. Connection between elements of different types 415
8.1.4. Other practical aspects 420
8.2. Example 1: machine-tool shaft 432
8.2.1. Simulation exercise 432
8.2.2. Data 433
8.2.3. Successive steps of modeling 434
8.3. Example 2: thin-walled structures 440
8.3.1. Model based on beam elements 441
8.3.2. Model in plate elements 448
8.3.3. Model in beam and plate elements 449
8.4. Example 3: modeling of a massive structure 450
8.4.1. Problem 450
8.4.2. Steps of modeling 451
8.4.3. Comments on the validity of the model 456
8.5. Summary of the successive modeling steps 457
8.5.1. Preliminary analysis 457
8.5.2. Model verification and validation 458
8.5.3. Corresponding use of the software 460
Part 3. Supplements 463
Chapter 9. Behavior of Straight Beams 465
9.1. The "straight beam" model 466
9.1.1. Definition 466
9.1.2. Main or "principal" axis of a cross-section 466
9.1.3. Applied loadings 468
9.1.4. Cohesion force and moment on a current cross-section 469
9.1.5. Hypothesis of the beam theory 474
9.1.6. Microscopic equilibrium 479
9.2. Mesoscopic equilibrium or equilibrium extended to a whole cross-section 482
9.3. Behavior relations and stresses 486
9.3.1. Normal resultant 486
9.3.2. Torsional loading 490
9.3.3. Pure bending 514
9.3.4. Plane bending with shear resultant 530
9.3.5. Any loading 549
9.4. Application: example of detailed calculation of the resultant forces and moments of cohesive forces
551
9.4.1. Preliminary static analysis 551
9.4.2. Resultant force and moment on every cross-section 553
Chapter 10. Additional Elements of Elasticity 563
10.1. Reverting to the plane state of stresses 563
10.1.1. Influence of the coordinate system 563
10.1.2. Principal directions and stresses 566
10.1.3. Mohr graphical representation 568
10.1.4. Summary 575
10.1.5. Some remarkable plane states of stresses with their Mohr representation 576
10.1.6. Experimental evaluation of deformations to define stresses 588
10.1.7. Deformation energy in principal axes 593
10.2. Complete state of stresses 593
10.2.1. Principal directions and stresses 593
10.2.2. Stresses in any x , y , z axes 594
10.2.3. Deformations 597
10.2.4. Behavior relations 599
10.2.5. Strain potential energy 604
10.2.6. Summary 609
10.2.7. Components of the strain potential energy 612
Chapter 11. Structural Joints 619
11.1. General information on connections by means of cylindrical fasteners 620
11.1.1. Contact pressure 620
11.1.2. General information on riveting 622
11.1.3. General information on bolted joints 624
11.1.4. Deterioration of riveted and bolted joints 626
11.2. Bolted joint 631
11.2.1. Simplified case where the tightening is neglected 631
11.2.2. Case of pre-tightening 654
11.3. Riveted joint 666
11.3.1. Hypotheses 666
11.3.2. Characteristics of the modeled joining interface 666
11.3.3. Forces on each attachment 667
11.3.4. Graphic representation of the shear stresses 668
11.3.5. Summary 670
11.4. Welded joints 671
11.4.1. Preliminary observations and hypotheses 671
11.4.2. Determination of the stresses in the weld bead cross-section 673
11.4.3. Summary 686
11.4.4. Example 688
Chapter 12. Mathematical Prerequisites 691
12.1. Matrix calculus 691
12.1.1. General information 691
12.1.2. Matrix operations 692
12.1.3. Quadratic form 696
12.1.4. Eigenvalues and eigenvectors of a matrix 697
12.2. Change in orthonormal coordinate system 698
12.2.1. Case of coplanar coordinate systems 698
12.2.2. Cases of any general coordinate systems 699
Appendix A. Modeling of Common Mechanical Joints 703
A.1. Definition 703
A.1.1. Monolithic unit 703
A.1.2. Joints 703
A.1.3. Perfect joints 704
A.2. Common standardized mechanical joints (ISO 3952) 704
Appendix B. Mechanical Properties of Materials 711
B.1. Mechanical properties of some materials used for structures 711
B.1.1. Steels and casting 711
B.1.2. Non-ferrous metals 712
Appendix C. List of Summaries 713
Bibliography 717
Part 1. Level 1 1
Chapter 1. The Basics of Linear Elastic Behavior 3
1.1. Cohesion forces 4
1.2. The notion of stress 6
1.2.1. Definition 6
1.2.2. Graphical representation 7
1.2.3. Normal and shear stresses 8
1.3. Hooke's law derived from a uniaxially applied force 9
1.3.1. The stretch test 9
1.3.2. Linear mechanical behavior 12
1.3.3. Elastic mechanical behavior 12
1.3.4. Interpretation of the test at a macroscopic level 13
1.3.5. Interpretation of the test at a mesoscopic level 13
1.3.6. Interpretation of the test at a microscopic level 16
1.3.7. Summary 18
1.4. Plane state of stresses 20
1.4.1. Definition 20
1.4.2. Behavior relationships for state of plane stresses 22
1.4.3. Summary 35
1.5. Particular case of straight beams 36
1.5.1. Preliminary observations 36
1.5.2. Effects linked to the resultant forces and moments 38
Chapter 2. Mechanical Behavior of Structures: An Energy Approach 51
2.1. Work and energy 51
2.1.1. Elementary work developed by a force 51
2.1.2. Elementary work developed by a moment 52
2.2. Conversion of work into energy 53
2.2.1. Potential energy of deformation 53
2.2.2. Potential energy for a spring 55
2.3. Some standard expressions for potential deformation energy 58
2.3.1. Deformation energies in a straight beam 58
2.3.2. Deformation energy under plane stresses 74
2.4. Work produced by external forces on a structure 81
2.4.1. Beam under plane bending subjected to two forces 82
2.4.2. Beam in plane bending subject to "n" forces 99
2.4.3. Generalization to any structure 103
2.4.4. Summary 112
2.5. Links of a structure with its surroundings 113
2.5.1. Example 113
2.5.2. Generalization 118
2.6. Stiffness of a structure 119
2.6.1. Preliminary note 119
2.6.2. Stiffness matrix 121
2.6.3. Examples 121
2.6.4. Influence of the positioning 125
2.6.5. Deformation energy and stiffness matrix 139
Chapter 3. Discretization of a Structure into Finite Elements 143
3.1. Preliminary observations 143
3.1.1. Problem faced 143
3.1.2. Practical obtaining of the deformation energy for a complex structure 144
3.1.3. Local and global coordinates 147
3.2. Stiffness matrix of some simple finite elements 153
3.2.1. Truss element loaded under traction (or compression) 153
3.2.3. Beam element under plane bending 168
3.2.4. Triangular element for the plane state of stresses 178
3.3. Getting the global stiffness matrix of a structure 191
3.3.1. Objective 191
3.3.2. Mechanism of the assembly of elementary matrices 191
3.3.1. Introduction 201
3.4. Resolution of the system {F}={K}??{d} 203
3.4.1. Linkage conditions 203
3.4.2. Generalization of the method 205
3.5. Different types of finite elements available in industrial software 207
Chapter 4. Applications: Discretization of Simple Structures 209
4.1. Stiffness matrix of a spring 209
4.1.1. Helical spring 209
4.1.2. Spiral spring. 211
4.2. Assembly of elements 213
4.2.1. Example 1 213
4.2.2. Example 2 217
4.2.3. Example 3 222
4.2.4. Assembly of a truss element and a beam element under simple plane bending 228
4.3. Behavior in the global coordinate system 232
4.3.1. Plane assembly of two truss elements 232
4.4. Bracket 246
4.4.1. Objectives 246
4.4.2. Modelizing 247
4.4.3. Calculation of the elementary stiffness matrix in the global system 252
4.4.4. Assembly of the global stiffness matrix [K]str 256
4.4.5. Establishing the linkage and loading conditions 259
4.4.6. Resolution of the linear system Fstr = [K]strdstr 260
4.4.7. Additional study of the behavior of the bracket 262
4.4.8. Using computing software 267
Part 2. Level 2 269
Chapter 5. Other Types of Finite Elements 271
5.1. Return to local and global coordinate systems 271
5.1.1. Transfer matrix 271
5.1.2. Summary 273
5.2. Complete beam element (any loading case) 274
5.2.1. Preliminary comments 274
5.2.2. Obtaining the stiffness matrix in the local coordinate system 276
5.2.3. Improvement in performances of this beam element 283
5.2.4. Summary 288
5.3. Elements for the plane state of stress 291
5.3.1. Triangular element 291
5.3.2. Quadrilateral element in plane state of stress 295
5.4. Plate element 300
5.4.1. Preliminary notes 300
5.4.2. Resultant forces and moments for cohesion forces 302
5.4.3. Plate element in bending 305
5.4.4. Complete plate element 310
5.5. Elements for complete states of stresses 315
5.5.1. Preliminary notes 315
5.5.2. Solid tetrahedric element 318
5.5.3. Solid parallelepipedic element 321
5.6. Shell elements 327
5.6.1. Preliminaries 327
5.6.2. Specific case of axisymmetric shells 328
5.6.3. Axisymmetric shell element with axisymmetric boundaries 329
Chapter 6. Introduction to Finite Elements for Structural Dynamics 331
6.1. Principles and characteristics of dynamic study 332
6.1.1. Example 1 332
6.1.2. Example 2 338
6.2. Mass properties of beams 346
6.2.1. Finite beam element in dynamic bending plane 346
6.2.2. Discretization of a beam for dynamic bending 350
6.2.3. Other types of dynamic behaviors of a beam 357
6.3. Generalization 363
6.4. Summary 364
Chapter 7. Criteria for Dimensioning 365
7.1. Designing and dimensioning 365
7.2. Dimensioning in statics 370
7.2.1. The two types of criteria 370
7.2.2. Elasticity limit criterion 373
7.2.3. Non-rupture criterion 382
7.3. Dimensioning in fatigue 393
7.3.1. Fatigue phenomenon 393
7.3.2. Fatigue test 394
7.3.3. Modeling of the fatigue 397
7.3.4. Estimation of fatigue strength 399
Chapter 8. Practical Aspects of Finite Element Modeling 407
8.1. Use of finite element software 407
8.1.1. Introduction 407
8.1.2. Summary tables of the properties of elements 408
8.1.3. Connection between elements of different types 415
8.1.4. Other practical aspects 420
8.2. Example 1: machine-tool shaft 432
8.2.1. Simulation exercise 432
8.2.2. Data 433
8.2.3. Successive steps of modeling 434
8.3. Example 2: thin-walled structures 440
8.3.1. Model based on beam elements 441
8.3.2. Model in plate elements 448
8.3.3. Model in beam and plate elements 449
8.4. Example 3: modeling of a massive structure 450
8.4.1. Problem 450
8.4.2. Steps of modeling 451
8.4.3. Comments on the validity of the model 456
8.5. Summary of the successive modeling steps 457
8.5.1. Preliminary analysis 457
8.5.2. Model verification and validation 458
8.5.3. Corresponding use of the software 460
Part 3. Supplements 463
Chapter 9. Behavior of Straight Beams 465
9.1. The "straight beam" model 466
9.1.1. Definition 466
9.1.2. Main or "principal" axis of a cross-section 466
9.1.3. Applied loadings 468
9.1.4. Cohesion force and moment on a current cross-section 469
9.1.5. Hypothesis of the beam theory 474
9.1.6. Microscopic equilibrium 479
9.2. Mesoscopic equilibrium or equilibrium extended to a whole cross-section 482
9.3. Behavior relations and stresses 486
9.3.1. Normal resultant 486
9.3.2. Torsional loading 490
9.3.3. Pure bending 514
9.3.4. Plane bending with shear resultant 530
9.3.5. Any loading 549
9.4. Application: example of detailed calculation of the resultant forces and moments of cohesive forces
551
9.4.1. Preliminary static analysis 551
9.4.2. Resultant force and moment on every cross-section 553
Chapter 10. Additional Elements of Elasticity 563
10.1. Reverting to the plane state of stresses 563
10.1.1. Influence of the coordinate system 563
10.1.2. Principal directions and stresses 566
10.1.3. Mohr graphical representation 568
10.1.4. Summary 575
10.1.5. Some remarkable plane states of stresses with their Mohr representation 576
10.1.6. Experimental evaluation of deformations to define stresses 588
10.1.7. Deformation energy in principal axes 593
10.2. Complete state of stresses 593
10.2.1. Principal directions and stresses 593
10.2.2. Stresses in any x , y , z axes 594
10.2.3. Deformations 597
10.2.4. Behavior relations 599
10.2.5. Strain potential energy 604
10.2.6. Summary 609
10.2.7. Components of the strain potential energy 612
Chapter 11. Structural Joints 619
11.1. General information on connections by means of cylindrical fasteners 620
11.1.1. Contact pressure 620
11.1.2. General information on riveting 622
11.1.3. General information on bolted joints 624
11.1.4. Deterioration of riveted and bolted joints 626
11.2. Bolted joint 631
11.2.1. Simplified case where the tightening is neglected 631
11.2.2. Case of pre-tightening 654
11.3. Riveted joint 666
11.3.1. Hypotheses 666
11.3.2. Characteristics of the modeled joining interface 666
11.3.3. Forces on each attachment 667
11.3.4. Graphic representation of the shear stresses 668
11.3.5. Summary 670
11.4. Welded joints 671
11.4.1. Preliminary observations and hypotheses 671
11.4.2. Determination of the stresses in the weld bead cross-section 673
11.4.3. Summary 686
11.4.4. Example 688
Chapter 12. Mathematical Prerequisites 691
12.1. Matrix calculus 691
12.1.1. General information 691
12.1.2. Matrix operations 692
12.1.3. Quadratic form 696
12.1.4. Eigenvalues and eigenvectors of a matrix 697
12.2. Change in orthonormal coordinate system 698
12.2.1. Case of coplanar coordinate systems 698
12.2.2. Cases of any general coordinate systems 699
Appendix A. Modeling of Common Mechanical Joints 703
A.1. Definition 703
A.1.1. Monolithic unit 703
A.1.2. Joints 703
A.1.3. Perfect joints 704
A.2. Common standardized mechanical joints (ISO 3952) 704
Appendix B. Mechanical Properties of Materials 711
B.1. Mechanical properties of some materials used for structures 711
B.1.1. Steels and casting 711
B.1.2. Non-ferrous metals 712
Appendix C. List of Summaries 713
Bibliography 717