European Metallurgical Conference 2015 (EMC 2015)
Volume 2 / Precious Metals - Pyrometallurgy / Hydrometallurgy / Recycling / Waste Minor Metals - Hydro-metallurgy / Pyrometallurgy Recycling / Waste - Pyrometallurgy / Hydrometallurgy General Pyrometallurgy Process Control Poster Authors Index Keywords Index
GDMB Verlag
Published on 12. June 2015
Book
618 pages
978-3-940276-62-9 (ISBN)
Description
Table of Contents - Volume 2
Precious Metals - Pyrometallurgy
Characterization of Refractoriness of an Arsenical Silver Ore 565
Oktay Celep, Pelin Altinkaya, Ersin Y. Yazici, Haci Deveci
The New Development of Copper and Gold Smelting Together 575
Cui Zhixiang, Shen Dianbang, Wang Zhi, Bian Ruimin, Li Xiujun
Modern Vacuum Distillation Technology for Zinc Recovery in 583
Primary Silver Production
Knut Esser, Urban Meurer, Sebastian Maurell-Lopez, Ludwig Naas, Wilfried Schmitz
Precious Metals - Hydrometallurgy
Pre-treatment of a Copper-rich Gold Ore for Elimination of Copper Interference 601
Ersin Y. Yazici, Firat Ahlatci, Elif Koc, Oktay Celep, Haci Deveci
Precious Metals - Recycling / Waste
Ultrasound assisted leaching process for precious metals recovery 617
from solid municipal waste
K. Brunelli, P. Cerchier, G. Zanmarchi, M. Dabalà
Recovering Precious Metals & Base Metals from Wastes using 629
DC Plasma Arc Technology
Dr. Tim Johnson, Dr. David Deegan
Recovery of Platinum Group Metals from Wasted Automobile Catalyst 643
Using Perovskite-type Oxide
Hiroki Kumakura, Kohta Nagai, Shota Yanai, Takashi Nagai
Base and Precious Metal Losses in Magnetic Separation of 649
Waste Printed Circuit Boards
Ersin Y. Yazici, Haci Deveci, Ridvan Yazici, Ata Akcil
Minor Metals - Recycling / Waste
Electrodeposition of lanthanum from ionic liquids at room temperature 665
E. Bourbos, I. Giannopoulou, D. Panias, I. Paspaliaris, A. Karantonis
Separation of Lanthanides from NdFeB Magnets using 673
Alkyl Phosphonic Acid PC-88A
Dipl.-Ing. Tobias Elwert, Prof. Dr.-Ing. Daniel Goldmann, M. Sc. Felix Römer
Development and Research Trends of the Neodymium 689
Electrolysis - A Literature Review
Dipl.-Ing. H. Vogel; Prof. Dr.-Ing. Dr. h.c. B. Friedrich
Extraction of Rare Earth Elements from non-Chinese Ion Adsorption Clays 703
Dipl.-Ing. D. Voßenkaul, Prof. Dr.-Ing. Dr. h.c. B. Friedrich, Dipl.-Geol. N. B. Stoltz,
Prof. Dr. rer. nat. F.M. Meyer
Minor Metals - Recycling / Waste
Separation of semiconductor layers from thin film solar panels 715
using microwave radiation
Dipl.-Ing. M Bartosinski, D. Michaelis M.Sc., Prof. Dr-Ing. Dr. h.c. B Friedrich
Reuse of metal cutting tools by wet chemical decoating 725
Tamara Ebner, Gregor Kücher, Stefan Luidold, Holger Schnideritsch, Christoph Czettl,
Christian Storf, Helmut Antrekowitsch
LCD Screens - Indium Characterization 739
Msc. Adjanara Preis Gabriel, Priscila Hiromi Yamazaki, Dr. Hugo Marcelo Veit
Challenges in the field of extractive metallurgy of technological metals 747
Ass.-Prof. Stefan Luidold
Recycling of Indium from end-of-life LCDs 759
Dipl.-Ing. Kai Rasenack, Prof. Dr.-Ing. Daniel Goldmann
Oxidation kinetics of a molybdenum-tantalum-alloy 771
Karin Ratschbacher, Stefan Luidold
Recycling / Waste
Challenges regarding recycling of REEs from permanent magnets 785
in a WEEE-fraction
Dipl.-Ing. Laura Benedek, Priv.-Doz. Dipl.-Ing. Dr.mont. Stefan Luidold,
Univ.-Prof. Dipl-Ing. Dr.mont. Helmut Antrekowitsch
High recovery recycling route of WEEE: The potential of pyrolysis 799
F. Diaz, S. Florez, B. Friedrich
Effects of pyrolysis on the metallurgical processing of waste electrical 819
and electronic equipment
Dipl.-Ing. Christoph Sorger, Dipl.-Ing. Dr. mont. Philipp Stuhlpfarrer, Priv.-Doz. Dipl.-Ing. Dr.mont. Stefan Luidold, Univ.-Prof. Dipl.-Ing. Dr.mont. Helmut Antrekowitsch
Treatment of industrial waste 833
Marlis Zöhrer, Thomas Angerer, Helmut Antrekowitsch, Franz Duspiva
Recycling / Waste - Pyrometallurgy
Recycling of Process Arising's in Furnaces using Pneumatic Injected Feed 847
M. E. Coleman
Recovery of zinc, lead and copper from waste multi-phase slags in 863
oxidation-reduction smelting process in the pilot TSL furnace
Ryszard Prajsnar, Józef Czernecki
Time-Saving Moisture Measurement System at Aurubis Secondary Smelter 875
Dr. rer. nat. Thorsten Preiß, Dietrich Strobel, Ingmar Brauer
Influencing the Electroslag Remelting Process by varying Fluorine 887
Content of the utilized Slag
Dipl.-Ing. S. Radwitz, Dipl.-Ing. H. Scholz, Prof. Dr-Ing. Dr. h.c. B. Friedrich,
Dipl.-Ing. H. Franz
Recycling / Waste - Hydrometallurgy
The Effect of Operating Parameters on the Electrocoagulation-flotation 899
of a Graphitic Forging Effluent
Dr. Maria Beatriz Borsa, Dr. Andréa Moura Bernardes, Dr. Carlos Pérez Bergmann
Characterization and Recycling of Silicon PV Modules 911
Eng. Pablo Ribeiro Dias, Mariana Gonçalves Benevit, Dr. Hugo Marcelo Veit
Recycling of Nd2Fe14B-Magnets 925
Dipl.-Ing. Dr. mont. Philipp Stuhlpfarrer, Priv.-Doz. Dipl.-Ing. Dr. mont. Stefan Luidold,
Univ.-Prof. Dipl.-Ing. Dr. mont. Helmut Antrekowitsch
General Pyrometallurgy
Modelling the mechanical entrainment of metal droplets by solid 941
particles in liquid slags
Ir. Inge Bellemans, Prof. Dr. Ir. Kim Verbeken, Prof. Dr. Ir. Nele Moelans
Effect of ZnO on the Reaction between MgO and Fe-saturated 959
ZnO-containing Fayalite Slags
L. Chen, M. Guo, H. Shi, P.T. Jones, B. Blanpain, A. Malfliet
History and New milestones in submerged arc furnace technology 971
for ferro alloy and silicon production
Dr. Rolf Degel, Dr. Christian Fröhling, Martin Köneke, Erik Hecker,
Harmen Oterdoom, Andrew van Niekerk
Pyrometallurgical extraction of valuable metals from polymetallic 989
deep-sea nodules
M.Sc. David Friedmann; Dipl.-Ing. A.-K. Pophanken; Prof. Dr.-Ing. Dr. h.c. B. Friedrich
Recent Advances in Research for Non-ferrous Smelting and Recycling 997
Evgueni Jak, Taufiq Hidayat, Denis Shishin, Peter Hayes
Recovery of rare earth elements from NdFeB based grinding slurries 1015
Dipl.-Ing. S. Kruse; Prof. Dr.-Ing. Dr. h.c. B. Friedrich,
Dipl.-Ing. K. Raulf; Prof. Dr.-Ing. T. Pretz
Dry Slag Granulation with Energy Recovery: 1027
Operation of full scale pilot plant
MSc ETH Daniel Michels, Dr.-Ing. Horst Kappes
Chemical Vapour Deposition of Fe2O3(s): Fe-O-Cl-Te System 1041
Professor Y. K. Rao
Process Control
On-line analysis of process conditions in ilmenite smelting with 1055
optical emission spectrometry
Matti Aula, Timo Fabritius, Sauli Pisilä
Hybrid Artificial Neural Network and Genetic Algorithm Modelling 1071
of Slag Properties
Lesley J. Beyers, Abhishek Dutta, Sandip K. Lahiri, Bart Blanpain, Frederik Verhaeghe
Maximizing power generation from metallurgical sulphuric acid plants 1085
S. Mohsler, S. Brechtel, Dr. H. Storch
Poster
Development of a lead-free brass alloy 1094
Thomas Angerer, Sigurd Hofer
Synergistic extraction and separation of Fe (III) and Zn (II) using 1096
TBP and D2EHPA
Dipl.-Ing. Atefeh Azizi, Prof. Dr.-Ing. Fereshteh Rashchi, Dipl.-Ing. Ataollah Babakhani,
Dipl.-Ing. Mehdi Noori
Identification of permanent magnets 1098
Dipl.-Ing. Laura Benedek
Study of phase equilibria and freeze linings in novel 1100
high temperature processes
Tijl Crivits, Peter Hayes, Evgueni Jak
Characterization and Recycling of Silicon PV Modules 1102
Eng. Pablo Ribeiro Dias, Mariana Gonçalves Benevit, Dr. Hugo Marcelo Veit
Wet chemical decoating of metal cutting tools 1104
Tamara Ebner, Gregor Kücher
LCD Screens - Indium Characterization 1106
Msc. Adjanara Preis Gabriel, Priscila Hiromi Yamazaki, Dr. Hugo Marcelo Veit
Characterisation and Thermal Behaviour of Indonesian Copper Sulphides 1108
for Leaching Process
Imelda Hutabarat, MSc.
Alloying Elements and Heat Treatment on Wrought 7xxx Aluminium Alloys 1110
Dipl.-Ing. Gernot Kolb, Univ.-Prof. Dipl.-Ing. Dr. mont. Helmut Antrekowitsch
Solvent extraction and separation of cobalt and lithium using 1112
D2EHPA and Cyanex 272
Dipl.-Ing. Sara Mahmoodi, Prof. Dr.-Ing. Fereshteh Rashchi, Dipl.-Ing. Mehdi Noori,
Dipl.-Ing. Ataollah Babakhani
Optimization of Vanadium Recovery from Power Plants Fly Ash in 1114
Alkaline Media
Dipl.-Ing. H. Nourizadeh, Prof. Dr.-Ing. F. Rashchi, Dipl.-Ing. S. M. J. Mirazimi, Dipl.-Ing. S. M. M. Noori
Influence of Electrolysis Parameter on the Co-Deposition of Impurities 1116
during Silver Electrorefining
Dipl.-Ing. A. Pophanken; Prof. Dr.-Ing. Dr. h.c. B. Friedrich, Dr. Wolfgang Koch
Anodizing of Recycling Aluminium 1118
DI Carina Maria Schlögl, Univ.-Prof. DI Dr.mont. Helmut Antrekowitsch
Effects of pyrolysis on the metallurgical processing of waste electrical 1120
and electronic equipment
Dipl.-Ing. Christoph Sorger
Recycling of Residues from the Copper Industry 1122
Dipl.-Ing. Stephan Steinacker
Recycling of Nd2Fe14B-Magnets 1124
Dipl.-Ing. Philipp Stuhlpfarrer
Innovative utilization of steel mill dust for the creation of secondary 1126
raw materials-2sDR process
Dipl.- Ing. Stefan Wegscheider
Precious Metals - Pyrometallurgy
Characterization of Refractoriness of an Arsenical Silver Ore 565
Oktay Celep, Pelin Altinkaya, Ersin Y. Yazici, Haci Deveci
The New Development of Copper and Gold Smelting Together 575
Cui Zhixiang, Shen Dianbang, Wang Zhi, Bian Ruimin, Li Xiujun
Modern Vacuum Distillation Technology for Zinc Recovery in 583
Primary Silver Production
Knut Esser, Urban Meurer, Sebastian Maurell-Lopez, Ludwig Naas, Wilfried Schmitz
Precious Metals - Hydrometallurgy
Pre-treatment of a Copper-rich Gold Ore for Elimination of Copper Interference 601
Ersin Y. Yazici, Firat Ahlatci, Elif Koc, Oktay Celep, Haci Deveci
Precious Metals - Recycling / Waste
Ultrasound assisted leaching process for precious metals recovery 617
from solid municipal waste
K. Brunelli, P. Cerchier, G. Zanmarchi, M. Dabalà
Recovering Precious Metals & Base Metals from Wastes using 629
DC Plasma Arc Technology
Dr. Tim Johnson, Dr. David Deegan
Recovery of Platinum Group Metals from Wasted Automobile Catalyst 643
Using Perovskite-type Oxide
Hiroki Kumakura, Kohta Nagai, Shota Yanai, Takashi Nagai
Base and Precious Metal Losses in Magnetic Separation of 649
Waste Printed Circuit Boards
Ersin Y. Yazici, Haci Deveci, Ridvan Yazici, Ata Akcil
Minor Metals - Recycling / Waste
Electrodeposition of lanthanum from ionic liquids at room temperature 665
E. Bourbos, I. Giannopoulou, D. Panias, I. Paspaliaris, A. Karantonis
Separation of Lanthanides from NdFeB Magnets using 673
Alkyl Phosphonic Acid PC-88A
Dipl.-Ing. Tobias Elwert, Prof. Dr.-Ing. Daniel Goldmann, M. Sc. Felix Römer
Development and Research Trends of the Neodymium 689
Electrolysis - A Literature Review
Dipl.-Ing. H. Vogel; Prof. Dr.-Ing. Dr. h.c. B. Friedrich
Extraction of Rare Earth Elements from non-Chinese Ion Adsorption Clays 703
Dipl.-Ing. D. Voßenkaul, Prof. Dr.-Ing. Dr. h.c. B. Friedrich, Dipl.-Geol. N. B. Stoltz,
Prof. Dr. rer. nat. F.M. Meyer
Minor Metals - Recycling / Waste
Separation of semiconductor layers from thin film solar panels 715
using microwave radiation
Dipl.-Ing. M Bartosinski, D. Michaelis M.Sc., Prof. Dr-Ing. Dr. h.c. B Friedrich
Reuse of metal cutting tools by wet chemical decoating 725
Tamara Ebner, Gregor Kücher, Stefan Luidold, Holger Schnideritsch, Christoph Czettl,
Christian Storf, Helmut Antrekowitsch
LCD Screens - Indium Characterization 739
Msc. Adjanara Preis Gabriel, Priscila Hiromi Yamazaki, Dr. Hugo Marcelo Veit
Challenges in the field of extractive metallurgy of technological metals 747
Ass.-Prof. Stefan Luidold
Recycling of Indium from end-of-life LCDs 759
Dipl.-Ing. Kai Rasenack, Prof. Dr.-Ing. Daniel Goldmann
Oxidation kinetics of a molybdenum-tantalum-alloy 771
Karin Ratschbacher, Stefan Luidold
Recycling / Waste
Challenges regarding recycling of REEs from permanent magnets 785
in a WEEE-fraction
Dipl.-Ing. Laura Benedek, Priv.-Doz. Dipl.-Ing. Dr.mont. Stefan Luidold,
Univ.-Prof. Dipl-Ing. Dr.mont. Helmut Antrekowitsch
High recovery recycling route of WEEE: The potential of pyrolysis 799
F. Diaz, S. Florez, B. Friedrich
Effects of pyrolysis on the metallurgical processing of waste electrical 819
and electronic equipment
Dipl.-Ing. Christoph Sorger, Dipl.-Ing. Dr. mont. Philipp Stuhlpfarrer, Priv.-Doz. Dipl.-Ing. Dr.mont. Stefan Luidold, Univ.-Prof. Dipl.-Ing. Dr.mont. Helmut Antrekowitsch
Treatment of industrial waste 833
Marlis Zöhrer, Thomas Angerer, Helmut Antrekowitsch, Franz Duspiva
Recycling / Waste - Pyrometallurgy
Recycling of Process Arising's in Furnaces using Pneumatic Injected Feed 847
M. E. Coleman
Recovery of zinc, lead and copper from waste multi-phase slags in 863
oxidation-reduction smelting process in the pilot TSL furnace
Ryszard Prajsnar, Józef Czernecki
Time-Saving Moisture Measurement System at Aurubis Secondary Smelter 875
Dr. rer. nat. Thorsten Preiß, Dietrich Strobel, Ingmar Brauer
Influencing the Electroslag Remelting Process by varying Fluorine 887
Content of the utilized Slag
Dipl.-Ing. S. Radwitz, Dipl.-Ing. H. Scholz, Prof. Dr-Ing. Dr. h.c. B. Friedrich,
Dipl.-Ing. H. Franz
Recycling / Waste - Hydrometallurgy
The Effect of Operating Parameters on the Electrocoagulation-flotation 899
of a Graphitic Forging Effluent
Dr. Maria Beatriz Borsa, Dr. Andréa Moura Bernardes, Dr. Carlos Pérez Bergmann
Characterization and Recycling of Silicon PV Modules 911
Eng. Pablo Ribeiro Dias, Mariana Gonçalves Benevit, Dr. Hugo Marcelo Veit
Recycling of Nd2Fe14B-Magnets 925
Dipl.-Ing. Dr. mont. Philipp Stuhlpfarrer, Priv.-Doz. Dipl.-Ing. Dr. mont. Stefan Luidold,
Univ.-Prof. Dipl.-Ing. Dr. mont. Helmut Antrekowitsch
General Pyrometallurgy
Modelling the mechanical entrainment of metal droplets by solid 941
particles in liquid slags
Ir. Inge Bellemans, Prof. Dr. Ir. Kim Verbeken, Prof. Dr. Ir. Nele Moelans
Effect of ZnO on the Reaction between MgO and Fe-saturated 959
ZnO-containing Fayalite Slags
L. Chen, M. Guo, H. Shi, P.T. Jones, B. Blanpain, A. Malfliet
History and New milestones in submerged arc furnace technology 971
for ferro alloy and silicon production
Dr. Rolf Degel, Dr. Christian Fröhling, Martin Köneke, Erik Hecker,
Harmen Oterdoom, Andrew van Niekerk
Pyrometallurgical extraction of valuable metals from polymetallic 989
deep-sea nodules
M.Sc. David Friedmann; Dipl.-Ing. A.-K. Pophanken; Prof. Dr.-Ing. Dr. h.c. B. Friedrich
Recent Advances in Research for Non-ferrous Smelting and Recycling 997
Evgueni Jak, Taufiq Hidayat, Denis Shishin, Peter Hayes
Recovery of rare earth elements from NdFeB based grinding slurries 1015
Dipl.-Ing. S. Kruse; Prof. Dr.-Ing. Dr. h.c. B. Friedrich,
Dipl.-Ing. K. Raulf; Prof. Dr.-Ing. T. Pretz
Dry Slag Granulation with Energy Recovery: 1027
Operation of full scale pilot plant
MSc ETH Daniel Michels, Dr.-Ing. Horst Kappes
Chemical Vapour Deposition of Fe2O3(s): Fe-O-Cl-Te System 1041
Professor Y. K. Rao
Process Control
On-line analysis of process conditions in ilmenite smelting with 1055
optical emission spectrometry
Matti Aula, Timo Fabritius, Sauli Pisilä
Hybrid Artificial Neural Network and Genetic Algorithm Modelling 1071
of Slag Properties
Lesley J. Beyers, Abhishek Dutta, Sandip K. Lahiri, Bart Blanpain, Frederik Verhaeghe
Maximizing power generation from metallurgical sulphuric acid plants 1085
S. Mohsler, S. Brechtel, Dr. H. Storch
Poster
Development of a lead-free brass alloy 1094
Thomas Angerer, Sigurd Hofer
Synergistic extraction and separation of Fe (III) and Zn (II) using 1096
TBP and D2EHPA
Dipl.-Ing. Atefeh Azizi, Prof. Dr.-Ing. Fereshteh Rashchi, Dipl.-Ing. Ataollah Babakhani,
Dipl.-Ing. Mehdi Noori
Identification of permanent magnets 1098
Dipl.-Ing. Laura Benedek
Study of phase equilibria and freeze linings in novel 1100
high temperature processes
Tijl Crivits, Peter Hayes, Evgueni Jak
Characterization and Recycling of Silicon PV Modules 1102
Eng. Pablo Ribeiro Dias, Mariana Gonçalves Benevit, Dr. Hugo Marcelo Veit
Wet chemical decoating of metal cutting tools 1104
Tamara Ebner, Gregor Kücher
LCD Screens - Indium Characterization 1106
Msc. Adjanara Preis Gabriel, Priscila Hiromi Yamazaki, Dr. Hugo Marcelo Veit
Characterisation and Thermal Behaviour of Indonesian Copper Sulphides 1108
for Leaching Process
Imelda Hutabarat, MSc.
Alloying Elements and Heat Treatment on Wrought 7xxx Aluminium Alloys 1110
Dipl.-Ing. Gernot Kolb, Univ.-Prof. Dipl.-Ing. Dr. mont. Helmut Antrekowitsch
Solvent extraction and separation of cobalt and lithium using 1112
D2EHPA and Cyanex 272
Dipl.-Ing. Sara Mahmoodi, Prof. Dr.-Ing. Fereshteh Rashchi, Dipl.-Ing. Mehdi Noori,
Dipl.-Ing. Ataollah Babakhani
Optimization of Vanadium Recovery from Power Plants Fly Ash in 1114
Alkaline Media
Dipl.-Ing. H. Nourizadeh, Prof. Dr.-Ing. F. Rashchi, Dipl.-Ing. S. M. J. Mirazimi, Dipl.-Ing. S. M. M. Noori
Influence of Electrolysis Parameter on the Co-Deposition of Impurities 1116
during Silver Electrorefining
Dipl.-Ing. A. Pophanken; Prof. Dr.-Ing. Dr. h.c. B. Friedrich, Dr. Wolfgang Koch
Anodizing of Recycling Aluminium 1118
DI Carina Maria Schlögl, Univ.-Prof. DI Dr.mont. Helmut Antrekowitsch
Effects of pyrolysis on the metallurgical processing of waste electrical 1120
and electronic equipment
Dipl.-Ing. Christoph Sorger
Recycling of Residues from the Copper Industry 1122
Dipl.-Ing. Stephan Steinacker
Recycling of Nd2Fe14B-Magnets 1124
Dipl.-Ing. Philipp Stuhlpfarrer
Innovative utilization of steel mill dust for the creation of secondary 1126
raw materials-2sDR process
Dipl.- Ing. Stefan Wegscheider