20th Symposium on Composites

Preface and Committee
Chapter 1: Polymer Matrix Composites
Fast Curing of Carbon Fiber Reinforced Plastics Using the Integration of Nanoparticles
Mechanical Properties of Structural Paper-Polypropylene Composite Laminates
Short Glass Fiber Reinforced PA6 Materials for Automotiv Applications - Assessment Aging Behavior with Methods of Polymer Diagnostics
Influence of Different Thawing Salts on the Material Properties of PA66GF30
Influence of the Impregnation Velocity on Impregnation Quality and Mechanical Properties of Vacuum Assisted Resin Transfer Moulding (VARTM) Materials
Cost-Effective Microfibrillar Reinforced Composites for Lightweight Applications
Toughening of Photopolymers for Stereolithography (SL)
PPS-Polymer-Composites for High Performance Rubber Components
Preparing of Heatable, CNT-Functionalized Polymer Membranes for Application in Textile Composites
Thermal Debinding of Ceramic-Filled Photopolymers
Chapter 2: Metal Matrix Composites and Interpenetrating Materials
Influence of In Situ Formed Tribolayer on Abrasive Wear Reduction
High Temperature Squeeze Casting of Nickel Based Metal Matrix Composites with Interpenetrating Microstructure
Innovative Aluminum Based Metallic Glass Particle Reinforced MMCs Produced by Gas Pressure Infiltration
Interpenetrating Freeze Cast Composites: Correlation between Structural and Mechanical Characteristics
Novel Metal-Matrix Composites Prepared by Paper Manufacturing Technology
Powder Metallurgical Tungsten Fiber-Reinforced Tungsten
Interface Characterization of Hybrid Composite Extrusions
Influence of the Diamond Surface Termination on the Thermal Conductivity of Al/Diamond- and Ag/Diamond MMCs
Influence of Reinforcement Geometry on the Very High-Cycle Fatigue Behavior of Aluminium-Matrix-Composites
Analysis and Evaluation of Different Influencing Factors in Processing of Hollow and Full Beads by Alginate Gelation Based on Zirconia and TRIP Steel
Efficient Processing of Metal-Matrix-Composites by Combining Direct Pressure Sintering and Subsequent Thixoforging
Influence of Mg-PSZ Particle Size on the Fatigue Behaviour of a High Alloy Steel Matrix Composite
Spark Plasma Sintering and Strength Behavior under Compressive Loading of Mg-PSZ/Al2O3-TRIP-Steel Composites
Synthesis of Copper/Silicon-Carbide Composites in a Thermodynamic Disequilibrium
Thermal Conductivity Behaviour of Al/Diamond and Ag/Diamond Composites in the Temperature Range 4 K < T < 293 K
The Influence of Stress and Heat on the Transformation Behaviour of NiTi for Actuator Applications in Extruded Aluminium Matrix Composites
Chapter 3: Ceramic Matrix Composites
Development and Characterisation of Phenolic Resin Moulding Materials for the Production of New Short Fibre-Reinforced C/C-SiC Composites
Development and Characterisation of Phenolic Resin Based Liquid Silicon Infiltrated SiC/SiC Composites with SiNx Fibre Coating
The Evaluation of Thermoplastic Precursors for C/C-SiC Manufactured by Liquid Silicon Infiltration (LSI)
Investigation of Different Phenolic Resins and their Behavior during Pyrolysis to Form SiC/C-Composites
Influence of Specimen Geometry and Surface Quality on the Bending Strength of Short Fiber-Reinforced C/SiC
Development of a SiNx-Based Barrier Coating for SiC Fibres
Development of a Silicon-Infiltrated Silicon Carbide (SiSiC) Friction Layer by the Doctor-Blade Technique Using a Computer-Optimized Calculation for the Packing Density
Damage Evaluation of CMCs after Drilling with Geometrically Defined Cutting Edges
Adhesive Bonding of Oxide Ceramics for Complex Ceramic Parts in High Temperature Furnaces
Chapter 4: Hybrid Structures, Laminates
Interface Phenomena of Co-Sintered Steel-Zirconia Laminates
Thermophysical Properties of Molybdenum Copper Multilayer Composites for Thermal Management Applications
Fundamental Studies and Development on an Innovative Ceramic/Polymer Material Compound
"Smart Multi Material Joint" - Hybrid Joint of Steel and FRP
Textile Reinforced Lightweight Shells
Surface and Fracture Surface Analysis of Thermally Bonded Metal/FRP Joints
Workpiece Shape Deviations in Face Milling of Hybrid Structures
Specific Mechanical Properties of New Hybrid Laminates with Thermoplastic Matrix and a Variable Metal Component
Smart Material Composites Substitute Monolithic Structures
Sandwich Structures: Analysis of Bonding Techniques between Faces and Core and the Effect of Internal Pressure
Residual Stresses in Intrinsic UD-CFRP-Steel-Laminates - Experimental Determination, Identification of Sources, Effects and Modification Approaches
Requirements for a Process Chain for Manufacturing of Piezoceramic-Aluminum Sandwiches
Mechanical Requirements of Tailored Joining Technologies for Spring Elements in Multi-Material-Design
Joining of Aluminum Matrix Composites and Stainless Steel by Arc Brazing
Intrinsic Lightweight Steel-Composite Hybrids for Structural Components
Influence of Material Properties on the Bond Strength of a Hybrid Part Consisting of Composite Sheet and Short-Fiber Thermoplastic
Increasing the Structural Integrity of Hybrid Plastics-Metal Parts by an Innovative Mechanical Interlocking Effect
Carbon Fiber Reinforced Composite - Toughness and Structural Integrity Enhancement by Integrating Surface Modified Steel Fibers
Experimental Investigation of the Shear Cutting Behaviour of Sandwich Panels
Evaluation of Corrosion Mechanisms of Hybrid Light Metal Structures by High Pressure Die Casting
Metal/FRP Connection Module - A Powder Metallurgical Approach
Optimization of Friction Stir Welded, Spring Steel Wire Reinforced EN AW-6082 Profile Joints
Spin-Blind-Riveting - A New Joining Technology for Hybrid Components
Evaluation of Different Hybrid Material Systems and Systematic Analysis of their Physical Mechanisms in Terms of Fatigue
Lightweight Hybrid Composites of CFRP and Aluminum Foam
The Consequence on Structural Adhesive Bonding of Humid Thermoplastic Composites and Possibilities of Prevention
Joining of Zirconia Reinforced Metal-Matrix Composites
Characterization of Metal Inserts Embedded in Carbon Fiber Reinforced Plastics
Combined Detachable Joints for Textile Reinforced Thermoplastic Composites with Embedded Sensor Networks
Process Combination of Hydroforming and Injection Moulding for the In Situ Manufacturing of Metal and Plastic Composite Structures
Chapter 5: Structural Health Monitoring
Analyses of Boundary Conditions for Process Integration of Sensor Elements in Complex Fibre-Reinforced Thermoplastic Spacer Structures
Laser Assisted Electrical Contacting in Multifunctional GF/PP Composites
Preparation of Ni-C Thin Films for Strain Sensor Applications in New Hybrid Laminates with Thermoplastic Matrix
Experimental and Numerical Studies on Integration Thermoplastic Composite Compatible Piezoelectric Ceramics for Actuatory Application of Cylindrical Hollow Structures
Process-Integrated Manufacturing and Embedding of Novel Piezoelectric Sensor Modules into Glass Fibre-Reinforced Polyurethane Composite Structures
Integrative Manufacturing of Textile-Based Sensors for Spatially Resolved Structural Health Monitoring Tasks of Large-Scaled Composite Components
Highly-Sensitive Humidity Sensors for Condition Monitoring of Hybrid Laminates
Integration Methods of Sensors in FRP Components
Chapter 6: Coatings
Nanostructured Coatings for Tooling Applications
Diamond Coatings on Carbon Based Substrates
Al-Mn Thermally Sprayed Coatings as Replacement of Cd-Based Coatings
Solvothermal Modified Layers against High Temperature Corrosion
Oxidation and Decomposition of Ti2AlN MAX Phase Coating Deposited on Nickel-Based Super Alloy IN718
Anodic Oxidation of AMCs: Influence of Process Parameters on Coating Formation
Preparation of Polymer-Derived Ceramic Coatings by Dip-Coating
Chapter 7: Modelling, Simulation
Coupling of Mold Flow Simulations with Two-Scale Structural Mechanical Simulations for Long Fiber Reinforced Thermoplastics
Surface Structuring of Sheet Moulding Compounds (SMC) for Process Reliable Coatings
Virtual Composite Manufacturing Simulation Chain
pvT-Behavior of Polymers under Processing Conditions and Implementation in the Process Simulation
Chapter 8: Manufacturing Technology, Components/Products/Applications
Continuous Winding Technology for Specific Closed Structural Components
Spinning of Staple Hybrid Yarn from Carbon Fiber Wastes for Lightweight Constructions
Support Structures in Lightweight Design for the Construction of Resource Efficient Bridges
Tool Life Experiments and Vibration Assistance in Regard to the Machining of CFRP
Innovative Concepts for the Use of Composite Material Solutions in the Production of Automotive Cylinder Heads
High Volume Production Technology for Corrosive Resistant Long-Fiber-Reinforced Plastic Extinguishers
Experimental and Numerical Analyses of the Lightweight Potential for Hybrid Thin-Walled Members
Energy and Time Efficient Microwave Curing for CFRP Parts Manufactured by Filament Winding
Braiding of Branches for the Fibre Composite Technology
Applications of Variable-Axial Fibre Designs in Lightweight Fibre Reinforced Polymers
Application of Polymer Plaster Composites in Additive Manufacturing of High-Strength Components
Application of a Composite Hot Shearing Tool Manufactured by Co-Spray Forming
Reinforcement Elements Aligned with the Direction of Forces for Load Transfer Areas of Long-Fiber-Reinforced Thermoplastic Components
Online Poling of Thermoplastic-Compatible Piezoceramic Modules during the Manufacturing Process of Active Fiber-Reinforced Composites
Chapter 9: Testing and Characterization
New Sandwich Structures Consisting of Aluminium Foam and Thermoplastic Hybrid Laminate Top Layers
The Edge Shear Test - An Alternative Testing Method for the Determination of the Interlaminar Shear Strength in Composite Materials
X-Ray Refraction Techniques for Fast, High-Resolution Microstructure Characterization and Non-Destructive Testing of Lightweight Composites
Process-Oriented Determination of Preform Permeability and Matrix Viscosity during Mold Filling in Resin Transfer Molding
Morphological Impact on the Fatigue Behaviour of Short Fibre Reinforced Polypropylene
Morphology of Sintered Cr-Mo Porous Materials
Identification of Bearing Defects in Hybrid Thrust Ball Bearings by Vibration Analysis
Characterisation of Steel Composites Produced by the Damascus Technique
Assembly Injection Molding of a Hard Component with Integrated Rubberlike Shaft Seal and Investigation of its Quality
Characterisation of Anisotropic Fibre Orientation in Composites by Means of X-Ray Grating Interferometry Computed Tomography
Characterization of the Mechanical and Fatigue Behavior of Braided Composites Made of Twisted Yarns
Composite-Composite Joining with through the Thickness Reinforcements for Enhanced Damage Tolerance

Failure Analysis of High-Strength Fiber Ropes
Fracture Mechanics Characterization of Sintered 30 Vol.-% Al2O3/TRIP Steel Composites Using SENB Miniature Samples
Consideration of Accuracy of Quantitative X-Ray CT Analyses for Short-Glass-Fibre-Reinforced Polymers
Fatigue Delamination Growth in CFRP Composites: From Pure Mode I and Mode II to Mixed Mode I/II
Method to Quantify the Surface Roughness of Circular Reinforcing Fibres
Micro Test Specimens for Compound Engineering with Minimum Material Needs
Online Process Monitoring and Control by Dielectric Sensors for a Composite Main Spar
Phase Change Detection in Neat and Fiber Reinforced Polyamide 6 Using Dielectric Analysis
Practical Results to the Long Term Behaviour of Fibre Reinforced Polymers under Constant Load
Stiffness and Strength Based Models for the Fatigue-Life Prediction of Continuously Fiber Reinforced Composites
Strength and Stiffness Degradation of Carbon Fiber Reinforced Plastic under Cyclic Loading under Membran-, Shear- and Bending Loading
New Approaches in Nondestructive Characterisation of Defects in Metal - CFRP Hybrids
Cyclic Deformation Behaviour of Cu Multilayered Films on Si Substrates
Chapter 10: Cemented Carbides, Cermets, Wear and Abrasion Materials
3D-FIB Characterization of Wear in WC-Co Coated Composites
Bimodal Particle Reinforcement for Wear Resistant Powder Metallurgy Steels
Control of the Cobalt Surface Layer Formation on Cemented Carbides
Gigacycle Fatigue Behaviour of Sintered WC-Co Hardmetals Investigated by Ultrasonic Resonance Testing
Chapter 11: Bio-Composites
Production of 3D Parts from Wood Chips in a Closed Mold Process
Bio-Pultrusion of Fac?ade-Profiles from Sustainable Materials
Processing and Characterization of Wood Plastic Composites from Bio-Based Polyamide 11 and Chemically Modified Beech Fibers
Impact Resistance Bio Compound
New Biocomposites for Lightweight Structures and their Processes
Bacterial Cellulose Reinforced Flax Fibre Composites: Effect of Nanocellulose Loading on Composite Properties
Chapter 12: Recycling & Sustainability, Building Materials
Sandwich Elements from Renewable Resources as a Structural Component in the Architecture
Knowledge Based Technologies for Promoting Innovation in Material Science
Damage Behaviour of Fibre Reinforced Materials Induced by High Temperature Oxidation for Optimisation of Thermal Recycling Routes
Integration of Mineral Fiber Semi-Finished Products in Bituminous Matrices