
Fluoropolymer Additives
William Andrew Publishing
2nd Edition
Published on 16. April 2019
Book
Hardback
304 pages
978-0-12-813784-0 (ISBN)
Description
Fluoropolymer Additives, Second Edition provides practical information on this group of additives, along with their applications and proper and safe handling. Chapters cover how commercial additives have been updated, providing a starting point where readers can begin the process of selection of additives for their own applications. Fully updated sections on applications provide the readers with a step-by-step description of the techniques necessary to select and incorporate these additives in various products. This book is the only practical guide available on the selection and use of fluoropolymer additives. It will help readers optimize existing fluoropolymer applications and implement new initiatives.
In recent years, the application of fluoropolymer additives has expanded significantly, with even the meaning of 'fluoropolymer additives' expanding from the relatively narrow definition of PTFE powder fillers to a wide variety of fluoropolymer elastomers used as processing aids for plastics processing techniques in extrusion, injection molding, and film blowing. In addition, fluropolymer additives are being increasingly used in inks, lubricants, and coatings.
In recent years, the application of fluoropolymer additives has expanded significantly, with even the meaning of 'fluoropolymer additives' expanding from the relatively narrow definition of PTFE powder fillers to a wide variety of fluoropolymer elastomers used as processing aids for plastics processing techniques in extrusion, injection molding, and film blowing. In addition, fluropolymer additives are being increasingly used in inks, lubricants, and coatings.
More details
Series
Edition
2nd edition
Language
English
Place of publication
Norwich
United States
Target group
Professional and scholarly
Dimensions
Height: 276 mm
Width: 216 mm
Weight
1030 gr
ISBN-13
978-0-12-813784-0 (9780128137840)
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions

Sina Ebnesajjad | Richard Morgan
Fluoropolymer Additives
E-Book
04/2019
2nd Edition
William Andrew
€215.00
Available for download
Previous edition

Sina Ebnesajjad | Richard Morgan
Fluoropolymer Additives
Book
12/2011
1st Edition
William Andrew Publishing
€273.35
Article exhausted; check for reprint
Persons
Sina Ebnesajjad is the series editor of Plastics Design Library (PDL) published in the William Andrew imprint of Elsevier. This Series is a unique series, comprising technology and applications handbooks, data books and practical guides tailored to the needs of practitioners. Sina was the editor-in-chief of William Andrew Publishing from 2005 to 2007, which was acquired by Elsevier in 2009. He retired as a Senior Technology Associate in 2005 from the DuPont fluoropolymers after nearly 24 years of service. Sina founded of FluoroConsultants Group, LLC in 2006 where he continues to work. Sina earned his Bachelor of Science from the School of Engineering of the University of Tehran in 1976, Master of Science and PhD from the University of Michigan, Ann Arbor, all in Chemical Engineering. He is author, editor and co-author of fifteen technical and data books including five handbooks on fluoropolymers technology and applications. He is author and co-author of three books in surface preparation and adhesion of materials, two of which are in their second editions. Sina has been involved with technical writing and publishing since 1974.His experiences include fluoropolymer technologies (polytetrafluoroethylene and its copolymers) including polymerization, finishing, fabrication, product development, failure analysis, market development and technical service. Sina holds six patents.
Editor
Fluoroconsultants Group, Chadds Ford, PA, USA
formerly President, Morgan Associates, DuPont
Content
Part 1: Introduction1. Introduction2. Description of Fluoropolymer Additives
Part 2: Manufacturing and Properties3. Manufacturing and Properties of High Molecular Weight Fluoropolymer Additives4. Manufacturing and Properties of Low Molecular Weight Fluoropolymer Additives5. Manufacturing and Properties of Fluoroelastomer-based Additives
Part 3: Applications6. Applications of Fluorinated Additives in Lubricants7. Applications of Fluorinated Additives in Plastics8. Applications of Fluorinated Additives in Inks9. Applications of Fluorinated Additives in Coatings10. Applications of Fluorinated Additives in Rubbers11. Applications of Fluorinated Additives as a Processing Aid
Part 4: Compliance and Economics12. Compliance with Regulations and Standards13. Economics, Safety, Environment and Health
Part 2: Manufacturing and Properties3. Manufacturing and Properties of High Molecular Weight Fluoropolymer Additives4. Manufacturing and Properties of Low Molecular Weight Fluoropolymer Additives5. Manufacturing and Properties of Fluoroelastomer-based Additives
Part 3: Applications6. Applications of Fluorinated Additives in Lubricants7. Applications of Fluorinated Additives in Plastics8. Applications of Fluorinated Additives in Inks9. Applications of Fluorinated Additives in Coatings10. Applications of Fluorinated Additives in Rubbers11. Applications of Fluorinated Additives as a Processing Aid
Part 4: Compliance and Economics12. Compliance with Regulations and Standards13. Economics, Safety, Environment and Health