Advanced Mechanical Engineering

Sponsors and Committees
Preface
Research for an Automatic Measurement System for Centroidal Deviation of Projectiles Based on Three Points Method
Robust Method for Separation of Noisy Biomedical Signals
Application Research on New BOM Model and Algorithm Base on Path Correlation
Pure Public Goods Model and the Optimal Size of China's Fiscal Expenditure: 1978-2006
Life Cycle Cost Accessment of Thermal Power Project under Sustainable Development
Research on a Rapid Self-Localization Method for Robot Based on Information Fusion
Research on Dynamics Modeling and Simulation for Transportation Truck Based on ADAMS
The Nonlinear Dynamics Characteristics Recognition of Power Load under Electricity Market
Investigation on Application of Biomimetic Technology to the Conservation of Longmen Grottoes
Analysis of Characters of HSI Color Space and Its Application in Moving Robot
A Study on E-Government Applications Model Construction Based on Government Customer Relationship Management
Finite Element Simulation of Combined Forming of Selective Laser Sintering and Cold Isostatic Pressing
The Research on the Application of High-Speed Washer in Waste Paper Deinking System
Research on Fault Recognition for Centrifugal Compressor Based on Fuzzy Gray Relational Grade
Research on Intelligent Fault Diagnosis Method Based on Rough Set Theory and Fuzzy Petri Nets
Influence of ZrO2 Nanoparticle as Additive on Tribological Property of Lithium Grease
Chaotic Characteristic and Nonlinear Dynamic Performance of Rolling Bearing Friction Torque
The Deformation Analysis about Guide Way Contact of Large Span and Heavy Load Cross-Rail
Time Series Data Mining Implemented on Football Match
Study on Structure and Property of PAN//MWNTs Composite Fibers
Research on Dynamic Data Streams Clustering Algorithm -Pdstream Based on PCA and Density
Maximal Frequent Itemsets in Data Stream Mining Based on Orderly-Compound Policy
New Policy of Maximal Frequent Itemsets in Data Stream Mining
Electrical and Structural Analysis of ATO/PP Nanocomposites
Characterization of Poly (Vinyl Alcohol) /Silver Nanocomposites Prepared by Heat Treatment Method
B-Spline Surfaces Modified Geometry with Control Vertices of Weighted Constrained Optimization
Experimental Investigation on Varying Speed Control of Harmonic in Centreless Grinding
Calculation of Inverse Kinematics Problem of a 5-DOF Rehabilitation Robot for Upper Limb Based on Screw Theory
Effects of Nanoscale Patterns on the Spectral Absorptance of Wafers
Competitive Co-Ordination Mechanism in the Application of Collaborative Commerce
Pre-Judgment Model of Image Based on Gray Distribution Wave
Characterization and Morphology of Composites Prepared from Polyacrylonitrile and Silver Nitrate
A Game Theory Approach for Multiple Design Tasks Schedule
Analysis and Control of Fretting Wear for Blade Bearing in Wind Turbine
Design and Implement of Project Production Technique Preparation Cooperative Platform Based on Unified Modeling Language
Decision Process Knowledge Acquisition through Integration of Rough Set and Ontology Technology
Performance of Wood-Polymer Composite Prepared by In Situ Polymerization of Styrene
Intelligent Design of Internal Combustion Engine in Hybrid Genetic Algorithm
Chaos Prediction of Rolling Bearing Friction Torque
Modeling and Simulation of a Six-Leg-Wheel Hybrid Mobile Robot Based on ADAMS
Finite Element Analysis for Machine Joint
Quality Management Mode and Process in Concurrent Engineering
Study on State Identifying of Rotary Machine Torsional Oscillation Based on Wavelet Neural Network
Research on Trade Model of Transaction Costs Based on Ecommerce
Application of the AGST Method to the Vibration Analysis of the Diesel Engine Cylinder Head Cover
A Combined System of TiO2 Suspension and Platinum Electrodes Used for Photoelectrochemical Degradation of a Dye in NaCl Solution
Numerical Analysis and Test Study of Bolted Structure
Research on the Phase Space Reconstruction Method of Chaotic Time Series
Research and Application on 6D Integrated System in Metro Construction Based on BIM
Novel Radar Absorbing Materials with Broad Absorbing Band: Carbon Foams
Solving #QBF Using Extension Rule
Minimizing the Cost of Sampling Inspection by Adjusting Sample Size
The EBSD Investigation on Microstructure Evolution in Fe-32%Ni Alloy during Multi-Axial Forging
Algorithm Based on 5-Axis NC Flank Milling of Arbitrary Surfaces
A Novel Assessment Algorithm Based on Grey AHP
Modification of PP and Its Application
Improved ACO for Dimensional Cutting-Stock Problem
Preparation and Properties of Composite TiO2-HZSM-5 Used for Photocatalytic Degradation of Methyl Orange
Nonlinear Analysis of Piercing Rolling Process by Element-Free Galerkin Method
Improving the Qualified Rate of Flux Test about Scavenging Pump in Aeroengine by Applying Six Sigma Methodology
Improvement on Hardness of 6061 Al Alloy Using an Electroless Ni-P Coating
Simplification Model for Prediction of Pressure Drop in Wire Mesh Mist Eliminator by CFD
Research of Reinforce Plan for No. Zero Frame of TB200 Aircraft and Secondary Damage Prediction
A Effective Knowledge Integration Algorithm Based on Culture Algorithm Framework
Analyze and Design a New Type of Production Line
Coefficient of Friction for Aluminum Alloy Sheet in Contact with Polyurethane Rubber
Application of Supporting Vector Regression Model on Simultaneous Determination of Benzoic Acid and Salicylic Acid
Genetic Algorithm Based Analysis System for Gun Pipe Linearity
An Approximate Method via Coefficient of Variation for Strength Prediction of Self-Piercing Riveted Joints
Investigations on Incremental Forming of Low Carbon Steel Sheets
Knowledge Modeling of Product Data Based on Fuzzy Ontology
Analysis on Stress-Strain Distribution in Rapid Prototyping
Study on the Properties of Microwave Curing Epoxy Resin/Nano-Fe Composite Materials
The Parametric Design and Motion Analysis of Disc Cam Mechanism with Straight Motion and Deviation Roller Follower
Deformation of Skeletal Muscle Using Volume-Preserving B-Spline Solid
Three Dimensional Finite Element Analysis of Composite Laminates with Non-Penetrating Damage Repaired by Scarf Bonding Method
Regulation Thought of Auto Bidding Advertisement for Search Engine Keywords
Comparison among Turbulence Models for a Novel Static Circulating Jet Mixer
Study on the Temperature Distribution of a Combined Plasma Arc Based on Spectral Diagnostics of Plasma
Assembly Sequence Planning Utilizing Chaotic Adaptive Ant Colony Optimization Algorithm
A System for Data Processing on Supply-Chain Distributed Simulation Platform Based on Agent
Application of Current Gain Compensation Method in Quality Control of Resistance Spot Welding of Galvanized Steel Plate
Embedded Software Simulation Testing Virtual Machine: Design and Application
Research on the Model of Group Decision-Making in Manufacturing Enterprise Emergency Event
Automatic Measurement System for Vertical Tank Volume by Electro-Optical Distance-Ranging Method
The Judgement for M-Matrices in Signal Processing
Heterogeneous IS Resources Acquisition: A Case Study
Construction and Application of Evaluation Model for Efficient Operation of Supply Chain Systems
Experimental Investigation on Warm Deep Drawing of Stainless Steel AISI 304
The Strategy Study of the International Fire Fighting Robot Competition
Application of Similitude Theory for Welding Deformation Prediction of Large Hydraulic Excavator
Study on Removal of Humic Acid by Polyurethane Foam/ Activated Carbon Composites in Boiler Feedwater
Research of Enterprise Information System Based on SOA Architecture
Self-Regulation PID-Fuzzy Controller for Flume System
A Study on Radial Curtain Plybamboo Form
The Evaluation Model of Unascertained Measure on Operation Quality of Transit Equipment
Study of Gear Profile Curve Equation for Less-Teeth Gear Transmission
Study of Modification Coefficient for Less-Teeth Gear Transmission
Photoelectrocatalytic Degradation of Methyl Orange Using Suspended TiO2 and the Effects of Ammonium Salts
The Forming Limits Prediction Model for Tailor Welded Blank with Straight Seam
An Improved PBIL Algorithm for the Machine-Part Cell Formation
A Method to Compute Resource Circuits in a Class of Petri Nets
Two-Direction Green Wave Control of Traffic Signal Based on Particle Swarm Optimization
Research on Dynamic Behaviors for a Parallel Machine Tool Considering Elastic Component
Kinematics Analysis and Simulation of a Quadruped Robot
Heavy-Duty Commercial Vehicle Axle Rapid Development System Design and Implementation Based on Virtual Reality Technology
Design of Red High-Definition NVD Mecha and Vibration Analysis
A New Method to Determine the Periodicity of Time Series
3-D Coordinate Determination from 2-D Automotive Sketches: Part I
3-D Coordinate Determination from 2-D Automotive Sketches: Part II
The Research and Actualize of the Quality Management System's Effectiveness Evaluation
Influences of Inflow Mode on Nutrient Removal Efficiency in a New SBR System
The Application of Fuzzy Theory and Gray-Based Rough Set Theory in the Supplier Selection Decision Making
Degradation of Trace Oil by Nano-TiO2 Loaded on Hollow Float Beads
Influences of Welding Sequence on Residual Stress of Plate Butt Welding
A Novel Fiber-Optic Liquid Level Sensor with Adjustable Light Path Based on Principle of Light Refraction
Experimental Study on Bionic Surface Based on the Compound Eye of Ant
Engineering Achievement and Application of Unascertained Clustering Decision Algorithm Based on MATLAB
Analysis and Compensation Following Error of Feed Drive in CNC
On a Risk Model with Dependence between Claim Sizes and Claim Intervals under a Linear Dividend Barrier and Stochastic Interest
Finite Element Analysis and Calculation in Cracks of Stress Intensity Factor of Thick Walled Cylinder
Fire Protection Studies on Steel Staggered-Truss Structure Based on Analytic Hierarchy Process
Super Fuzzy Defect Classifier Based on Self-Adaptation
Research on Powder Spreading Property Improvement of Wood-Plastic Composite SLS Rapid Prototyping Process
An Improved Ant Colony Optimization Algorithm for Solving the TSP Problem
Relative Design Cost Estimation at Design Stage Based on Design Features
Photoelectrochemical Degradation of Procion Red MX-5B in TiO2 Suspension Using Na2SO4 as Electrolyte
Optimization of Process Parameters in Lead-Free Wave Soldering Based on Orthogonal Experiment and Analytic Hierarchy Process
Research Progress of Low-Frequency Vibration Cutting and Its Development Tendency
An Improved Noise Reduction Algorithm Based on Manifold Learning and Its Application to Signal Noise Reduction
An Improved Artificial Bee Colony Algorithm for Job Shop Problem
The Research of the CSR Appraisal to Bus Listed Companies Based on Factor Analysis
Effecting Factors Study for Powder Flow Characteristics
Development and Application of the Optimization Design of Progressive Die Based on Transfer Unit
A Fault Diagnosis Method of Rolling Bearing through Wear Particle and Vibration Analyses
Preparation and Characterization of Nanosized Barium-Strontium Titanate Immobilized on Aluminum Oxide and Its Application in Adsorption
Autonomous Intelligent System for Supply Chain Management on Mass Customization Manufacture
Customer Oriented Product Design by Adaptive Clustering Analysis
Modeling on the Ground Wafer Shape in Wafer Rotational Grinding
Green Laser Drilling Assisted with Neutral Salt Solution
An Adjustable Adaptive Subdivision Surface Modeling Based on Triangle Meshes
A Coupling Dynamic Model for Interfacial Reaction between Slag and Metal of Stainless Steelmaking by Chromium Ore Smelting Reduction in a Converter
Resource Allocation Problem in Manufacturing Grid Based on JADE
Virtual Maintenance Concepts and Methods
Polycrystal Synthesis and Single Crystal Growth of PbI2
A Differential Evolution with Scatter Search for Project Scheduling
The Internal Connection Study of Graphics, Image and Virtual Realism
Performance Estimate for Design of Storage-Type Domestic Electrical Water-Heaters Based on the CFD Simulation
Numerical Simulation and Experiment of a New Drive Device of High-Temperature Magnetic Pump
Research on the Model of Grid Marketing Management
An Improved Algorithm for X-Corner Detection
A Hybrid Approach Based on Artificial Neural Network (ANN) and Differential Evolution (DE) for Job-Shop Scheduling Problem
On the Modeling of Coupled Vibration of Rotating Thin-Walled Closed-Section Composite Beams
Study on Cutting Parameters Optimization Based on Uniform Design Method
Study on a Semi-Active Shock Isolation Technology with Magnetorheological Devices
Two-Stage Constructing Hyper-Plane for Each Test Node of Decision Tree
Distribution Network Planning Based on Entropy Fuzzy Comprehensive Method
The Wear Resistance of Pack-Boronizing of the Oilstone Forming Die
Uncertainty Propagation Analysis for Turbine Cooling Blade Multidisciplinary Design
Structural Design and Analysis on Frame of Blueberry Harvesters Based on ANSYS
Research on Flexible Cables Simulation Based on CATIA/DELMIA
Study on Nonlinear Dynamic Response of the Gear-Shaft-Housing Coupling System
Game Strategy in Multi-User Shared Virtual Environment Based on Internet
An Optimization Algorithm for a Class of Mathematical Model in Mechanical Engineering
The Modeling and Integrating Issues of EII- Oriented QMS in Manufacturing Enterprises
Study on Scheduling Optimization for Flexible Job Shop
Slagging Process Simulation Based on Improved BP Neural Network
Durability of Wood-PMMA Composite
Preparation and Characterization of Nano-Calcium Titanate-Based Coated Silica Gel G and the Application in Adsorption of Heavy Metals
Information Modeling Design in Product Development
Technology for Nanodiamond Electroless Composite Plating and Properties of Coating
A Bran-New Cross-Domain Authentication Model Based on Lattice
Zonal Compensation for Work-Piece Elastic Deformation through Fixture Layout Optimization
Architecture Design of Customer-Oriented Digital Enterprise Systems
Study on the Dynamics on the Brake of Vehicle after the Effects of Deicing Salt
A Machining Shop Scheduling Model Based on UML and IDEF
Study on Chip Morphology and Adiabatic Shear in High Speed Cutting of Alloy Steels with Different Hardness
Structure Design and Kinematic Analysis on the Walking Mechanism of Forestry Walking Robot
The Optimal Cost Model of Compound Maintenance for Multi-Component Systems
A Dynamically Reconfigurable Workflow System Based on Web Service Technology
Object-Oriented Modeling and Simulation of Railway Vehicle Systems
Vibration Control Using Shunted Electromagnetic Transducer
Global Path Planning for Mobile Robot Based on Improved Dijkstra Algorithm and Particle Swarm Optimization
A Novel ERP Framework Based on Service-Oriented Architecture
Synthesis of Al2O3/AlB12/Al Composite Ceramic Powders by Pulsed Nd:YAG Laser Igniting Method and a Study of their Mechanical Properties
Application and Implementation of Monte Carlo Method in Mechanical Engineering
3D Modeling and Simulation of a New Type of Globoidal Indexing Cam Mechanism
Correlation Analysis between Dynamic Young's Modulus and Static MOE of the Poplar LVL Reinforced with Multilayer Fiberglass Mesh
Linear Relationship between Dynamic Young's Modulus and MOR of the Poplar LVL Reinforced with Monolayer Fiberglass Mesh
Stiffness of Wood-FRP Bonding Interface with Ambient Curable Epoxy Adhesives
Stiffness of Fiber-Wood Bonding Interface with Wood Adhesives
Network Security Situation Awareness Adaptive Control Model Based on Cognitive Network
Multiple Objective Robust Optimization Design of the Web Press's Fold Mechanism
Study for the Method of Automobile Oil Consumption Measuring Based on Ultrasonic Wave
Trajectory Control in Automated Welding of Tubular Joints
Structure Characterization for Wood-PMMA Composite
Research on Cutter's Position and Pose for Chamfering Spiral Bevel Gear Addendum
Research on Tool-Path Generating Methods for NC Machining of Centrifugal Pump Vanes
Tool Wear of PVD Coated Carbide Inserts in High Speed Turning Inconel 718
An Analysis on Implementation of Activity-Based Cost Management in Chinese Manufacturing Industry
Calculation Algorithms for Automobiles' Acceleration Performance
An Explicit Analysis Method for Lifting Mechanisms
Performance Evaluation of Sustainable Supply Chain Based on AHP and Fuzzy Comprehensive Evaluation
An Explicit Analysis Method for Walking-Beam Oil Pumping Unit
Research on Quality Control Processes Management in Manufacturing Network Based on Workflow and Multi-Agent
Optimization of PEM Fuel Cell System Using Dynamic Model
Study of Wheat Straw Veneer on Weave Process
A Feasible Algorithm for a Class of Mathematical Problems in Mechanical System
Large Network Model of Complex Systems
Research on Knowledge Transfer and Sharing in the Implement of Manufacturing EPR
Solving Fuzzy U-Shaped Line Balancing Problem with Exact Method
Wear Characteristic and Life of Al2O3/(W,Ti)C Ceramic Tool in Turning Iron-Based P/M Composites
Preparation of Water-Resistance Plywood with UF Resin Modified by Emulsifiable Polyisocyanate
Study on Characteristic of Aqueous Polymer Isocyanate Curing Reaction
Preparation of Plywood Using Starch Adhesives Modified with Isocyanate
A Research on Destination Marketing System Evaluation: A Tourist Destination Image View
A New Ergonomics Manikin Generation Method from Real 3D Scanning Body
Optimal Production Scheduling for the Polyamide Fiber Plant Using Simulated Annealing
A Method for Jet Fuel Suppliers Evaluation Based on Agile Supply Chain
Piezoelectric Battery Design to Harvest Ambient Vibration Energy for Wireless Sensor Nodes
Application of Sanger Operator with Lateral Connection in Fitting Micro-Drill's Main Lips
Evolution Pattern Discovery and Case Study of Logistics Companies Based on Time Series Analysis
Studies on Regulator Experiment of a High-to-Float High-Ash Fine Coal
Development of Fuel Cell Hybrid Electric Vehicle Simulator and HCU
A Service Oriented Architecture for Collaborative Product Design
Research on the Relationships between Blade Angles and External Characteristics of a Centimeter Scale Pneumatic Turbine
Investigation of Belt Conveyor Transfer Chute Configurations to Reduce Dust Generation Using CFD Modeling
Experimental Study of Green High-Speed Turning Nickel-Based Superalloy GH4169
Time-Dependent Temperature Distribution of Sheets in the Stage of Storing
Production of Zinc Powder by Alkaline Hydrometallurgy
A Meta-Heuristic with Ant Colony Approach to Complex System
A Hybrid Swarm Optimization Algorithm for Complex Assignment Problem
A Hybrid Algorithm Based on PSO and DE and Its Application in Complexity System
A Dynamic Re-Configuration and Order Optimization Model and Optimization Algorithm in Complex System
Infrared Image Multi-Scale Recognition Based on Gabor Wavelet
Finite Element Analysis of Behavior of Bolted Flange Connections under Bending Loading
A Study on Manufacturing Efficiency and Quality of Thermoforming
Sensitivity Analysis on Effect of Parent Materials Parameter on Formability of Tailor Welded Blank
Study on Evaluation Method of Corroded Reinforcing Steel
CFD Simulation of Gas-Solid Flow in Dense Phase Bypass Pneumatic Conveying Using the Euler-Euler Model
Automatic Generation of NC Programs for Cylinder-Type Parts
The Narrow Pulse-Width Laser-Diode End-Pumped Nd:Yvo4/Lbo Green Laser
A Novel Optimal Design Method for Hybrid Vibration Isolation System
Research on Double Parameters Discharge Gap Detection of Gap Voltage and Charging Current in Micro-EDM
Achieving Flexible Reconfiguration via Mechatronic Modules
Combining Six Sigma with Kaizen Blitz for Enhancing Process Interaction
Super-Harmonic Resonance Analysis on Torsional Vibration of Misaligned Rotor Driven by Universal Joint
A Robust Design for a Complex System Based Satisfactory Optimization
Dynamic Analysis and Active Vibration Control of Flexible Beams Using Piezoelectric Materials: an Optimal Approach
The Basic Study of Dynamic Walking Aids Based on Gait Stability