Machining and Machine-tools
Research and Development
Published on 10. May 2013
Book
Hardback
280 pages
978-0-85709-154-3 (ISBN)
Description
This book is the third in the Woodhead Publishing Reviews: Mechanical Engineering Series, and includes high quality articles (full research articles, review articles and case studies) with a special emphasis on research and development in machining and machine-tools. Machining and machine tools is an important subject with application in several industries. Parts manufactured by other processes often require further operations before the product is ready for application. Traditional machining is the broad term used to describe removal of material from a work piece, and covers chip formation operations including: turning, milling, drilling and grinding. Recently the industrial utilization of non-traditional machining processes such as EDM (electrical discharge machining), LBM (laser-beam machining), AWJM (abrasive water jet machining) and USM (ultrasonic machining) has increased. The performance characteristics of machine tools and the significant development of existing and new processes, and machines, are considered. Nowadays, in Europe, USA, Japan and countries with emerging economies machine tools is a sector with great technological evolution.
More details
Series
Language
English
Place of publication
Cambridge
United Kingdom
Publishing group
Elsevier Science & Technology
Target group
College/higher education
Dimensions
Height: 234 mm
Width: 156 mm
Weight
560 gr
ISBN-13
978-0-85709-154-3 (9780857091543)
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
E-Book
05/2013
Woodhead Publishing
€165.00
Available for download
Person
Prof. (Dr.) J. Paulo Davim is a Full Professor at the University of Aveiro, Portugal, with over 35 years of experience in Mechanical, Materials, and Industrial Engineering. He holds multiple distinguished academic titles, including a PhD in Mechanical Engineering and a DSc from London Metropolitan University. He has published over 300 books and 600 articles, with more than 36,500 citations. He is ranked among the world's top 2% scientists by Stanford University and holds leadership positions in numerous international journals, conferences, and research projects. J. Paulo Davim received the Ph.D. degree in Mechanical Engineering in 1997, the M.Sc. degree in Mechanical Engineering (materials and manufacturing processes) in 1991, the Mechanical Engineering degree (5 years) in 1986, from the University of Porto (FEUP), the Aggregate title (Full Habilitation) from the University of Coimbra in 2005 and the D.Sc. from London Metropolitan University in 2013. He is Eur Ing by FEANI-Brussels and Senior Chartered Engineer by the Portuguese Institution of Engineers with a MBA and Specialist title in Engineering and Industrial Management. Currently, he is Professor at the Department of Mechanical Engineering of the University of Aveiro, Portugal. He has more than 30 years of teaching and research experience in Manufacturing, Materials and Mechanical Engineering with special emphasis in Machining & Tribology. He has also interest in Management & Industrial Engineering and Higher Education for Sustainability & Engineering Education. He has guided large numbers of postdoc, Ph.D. and masters students as well as coordinated & participated in several research projects. He has received several scientific awards. He has worked as evaluator of projects for international research agencies as well as examiner of Ph.D. thesis for many universities. He is the Editor in Chief of several international journals, Guest Editor of journals, books Editor, book Series Editor and Scientific Advisory for many international journals and conferences. Presently, he is an Editorial Board member of 25 international journals and acts as reviewer for more than 80 prestigious Web of Science journals. In addition, he has also published as editor (and co-editor) more than 100 books and as author (and co-author) more than 10 books, 80 book chapters and 400 articles in journals and conferences (more than 200 articles in journals indexed in Web of Science core collection/h-index 45+/6000+ citations and SCOPUS/h-index 52+/8000+ citations).
Content
List of figures and tables
List of abbreviations
Preface
About the contributors
Chapter 1: Analysis of acoustic emission signal evolution for monitoring diamond-coated tool delamination wear in machining
Abstract:
1.1 Introduction
1.2 Experimental set-up and methods
1.3 Results and discussion
1.4 Conclusions
Chapter 2: High-performance machining of austenitic stainless steels
Abstract:
2.1 Introduction
2.2 Properties of austenitic stainless steels
2.3 Machining study of austenitic stainless steels at high performance conditions
2.4 Conclusions
Chapter 3: Forces monitoring in shape grinding of complex parts
Abstract:
3.1 Introduction
3.2 Generality of screw rotors
3.3 Workpiece holder
3.4 Experimental tests
3.5 Results and discussion
3.6 Conclusions
Acknowledgements
Chapter 4: Optimization of minimum quantity lubrication in grinding with CBN wheels
Abstract:
4.1 Introduction
4.2 Literature review
4.3 Wheel cleaning
4.4 Conclusions
Chapter 5: Electrical discharge machining: study on machining characteristics of WC/Co composites
Abstract:
5.1 Introduction
5.2 Principles of the EDM process
5.3 Machining experiments
5.4 Response surface modelling using Box-Behnken design
5.5 Response surface model for MRR and surface roughness
5.6 Results and discussion
5.7 Summary
Acknowledgements
Chapter 6: Conventional and unconventional hole making in metal matrix composites
Abstract:
6.1 Introduction
6.2 Development of the secondary processes for MMCs: 'need of the hour'
6.3 Classification of MMCs based on the matrix material
6.4 Fabrication processes for MMCs
6.5 Conventional and unconventional machining processes
6.6 Conventional secondary processing of MMCs
6.7 Hole making in MMCs
6.8 Unconventional machining of MMCs
Chapter 7: A laboratory machine for micro electrochemical machining
Abstract:
7.1 Introduction
7.2 Development of the laboratory machine
7.3 Experimental work plan
7.4 Results and discussion
7.5 Conclusions
Chapter 8: Cam-driven electromagnetic mechanical testing machine
Abstract:
8.1 Introduction
8.2 Design and fabrication of the testing machine
8.3 Experimental workplan
8.4 Results and discussion
8.5 Conclusions
Acknowledgment
Index
List of abbreviations
Preface
About the contributors
Chapter 1: Analysis of acoustic emission signal evolution for monitoring diamond-coated tool delamination wear in machining
Abstract:
1.1 Introduction
1.2 Experimental set-up and methods
1.3 Results and discussion
1.4 Conclusions
Chapter 2: High-performance machining of austenitic stainless steels
Abstract:
2.1 Introduction
2.2 Properties of austenitic stainless steels
2.3 Machining study of austenitic stainless steels at high performance conditions
2.4 Conclusions
Chapter 3: Forces monitoring in shape grinding of complex parts
Abstract:
3.1 Introduction
3.2 Generality of screw rotors
3.3 Workpiece holder
3.4 Experimental tests
3.5 Results and discussion
3.6 Conclusions
Acknowledgements
Chapter 4: Optimization of minimum quantity lubrication in grinding with CBN wheels
Abstract:
4.1 Introduction
4.2 Literature review
4.3 Wheel cleaning
4.4 Conclusions
Chapter 5: Electrical discharge machining: study on machining characteristics of WC/Co composites
Abstract:
5.1 Introduction
5.2 Principles of the EDM process
5.3 Machining experiments
5.4 Response surface modelling using Box-Behnken design
5.5 Response surface model for MRR and surface roughness
5.6 Results and discussion
5.7 Summary
Acknowledgements
Chapter 6: Conventional and unconventional hole making in metal matrix composites
Abstract:
6.1 Introduction
6.2 Development of the secondary processes for MMCs: 'need of the hour'
6.3 Classification of MMCs based on the matrix material
6.4 Fabrication processes for MMCs
6.5 Conventional and unconventional machining processes
6.6 Conventional secondary processing of MMCs
6.7 Hole making in MMCs
6.8 Unconventional machining of MMCs
Chapter 7: A laboratory machine for micro electrochemical machining
Abstract:
7.1 Introduction
7.2 Development of the laboratory machine
7.3 Experimental work plan
7.4 Results and discussion
7.5 Conclusions
Chapter 8: Cam-driven electromagnetic mechanical testing machine
Abstract:
8.1 Introduction
8.2 Design and fabrication of the testing machine
8.3 Experimental workplan
8.4 Results and discussion
8.5 Conclusions
Acknowledgment
Index