Unmaking Waste in Production and Consumption
Towards The Circular Economy
Published on 13. September 2018
Book
Hardback
376 pages
978-1-78714-620-4 (ISBN)
Description
The legacies of a century of fossil-fuel based development and
overconsumption, of treating the environment as a waste sink for industry
and agriculture, have left devastating impacts on the earth's air, water and
land, and these are directly implicated in Climate Change. In response, a
number of global institutions and nations, including the European Union
and China, have committed themselves to the development of a 'circular
economy'. This will require a transformation of today's 'linear economy' of
'make, use and dispose' as the market dictates, into a Circular Economy.
The aim of the Circular Economy is to decouple economic growth from
resource and energy use through iterative, systemic social, economic and
technological reform. This book presents new theoretical and practical
insights into this concept, based on case studies from both the developing
and developed world, with an emphasis on economic and material
transformation, design for reuse and waste reduction, industrial 'symbiosis'
(the planned circulation of resources and energy within an industrial setting),
and social innovation and entrepreneurship.
Four central themes emerge through the essays presented here: the
importance of 'restorative design' in transforming resource flows through
both production and consumption, the value of understanding and
enumerating wastes in more detail to enable their reuse, the central role
of advancing technology and applied science to further this transformation
of materials for reuse, and finally, a reconfiguration of design, consumption
and retail, so that the present 'linear' economy of 'make, use and trash' can
be replaced with a more 'circular' model.
overconsumption, of treating the environment as a waste sink for industry
and agriculture, have left devastating impacts on the earth's air, water and
land, and these are directly implicated in Climate Change. In response, a
number of global institutions and nations, including the European Union
and China, have committed themselves to the development of a 'circular
economy'. This will require a transformation of today's 'linear economy' of
'make, use and dispose' as the market dictates, into a Circular Economy.
The aim of the Circular Economy is to decouple economic growth from
resource and energy use through iterative, systemic social, economic and
technological reform. This book presents new theoretical and practical
insights into this concept, based on case studies from both the developing
and developed world, with an emphasis on economic and material
transformation, design for reuse and waste reduction, industrial 'symbiosis'
(the planned circulation of resources and energy within an industrial setting),
and social innovation and entrepreneurship.
Four central themes emerge through the essays presented here: the
importance of 'restorative design' in transforming resource flows through
both production and consumption, the value of understanding and
enumerating wastes in more detail to enable their reuse, the central role
of advancing technology and applied science to further this transformation
of materials for reuse, and finally, a reconfiguration of design, consumption
and retail, so that the present 'linear' economy of 'make, use and trash' can
be replaced with a more 'circular' model.
Reviews / Votes
Environmental scientists, engineer, and activists analyze the concept of the circular economy, emphasizing the different contexts in which the circulation of materials through the economy takes place. They cover history, theory, and experience; consumption, design, and behavior; waste and resource recovery; and technology and systems innovation. Their topics include from Spaceship Earth to the circular economy: the problem of consumption, circular by design: a model for engaging small and medium fashion and textile companies with strategies for designed reuse, renewing materials: implementing three-dimensional printing and distributed recycling in Samoa, towards an agile circular economy for the building industry, and re-valuing construction materials and components through design for disassembly. -- Annotation (c)2018 * (protoview.com) *More details
Language
English
Place of publication
Bingley
United Kingdom
Target group
Professional and scholarly
Dimensions
Height: 235 mm
Width: 157 mm
Thickness: 25 mm
Weight
694 gr
ISBN-13
978-1-78714-620-4 (9781787146204)
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Additional editions
Robert Crocker | Christopher Saint | Guanyi Chen
Unmaking Waste in Production and Consumption
Towards The Circular Economy
E-Book
09/2018
1st Edition
Emerald Publishing Limited
€103.99
Available for download
Persons
Robert Crocker is Deputy Director of the China-Australia Centre for Sustainable Urban Development at the University of South Australia. Christopher Saint is the Director of the China-Australia Centre for Sustainable Urban Development, and Dean, Research and Innovation, of the Information Technology, Engineering and Environment Division at the University of South Australia.
Guanyi Chen is Chair and Professor of Bioenergy and Environment, Dean of the School of Environmental Science and Engineering Director of the China-Australia Centre for Sustainable Urban Development at Tianjin University.
Yindong Tong is Deputy Director of the China-Australia Centre for Sustainable Urban Development, and Associate Professor of Environmental Science at the School of Environmental Science and Engineering, Tianjin University.
Guanyi Chen is Chair and Professor of Bioenergy and Environment, Dean of the School of Environmental Science and Engineering Director of the China-Australia Centre for Sustainable Urban Development at Tianjin University.
Yindong Tong is Deputy Director of the China-Australia Centre for Sustainable Urban Development, and Associate Professor of Environmental Science at the School of Environmental Science and Engineering, Tianjin University.
Content
Preface: Professor Li'an Hou - Academic, Chinese Academy of Engineering Introduction. Robert Crocker, Christopher Saint, Guanyi Chen, and Yindong Tong
Part 1: History, Theory and Experience
1. From 'Spaceship Earth' to the Circular Economy: The Problem of Consumption; Robert Crocker
2. Can Economics assist the Transition to the Circular Economy?; Martin Shanahan
3. China's Policies for promoting a Circular Economy: Past-Decade Experiences, Future Plans and Success Stories; Xu Zhao
4. Biosolids: The Growing Potential for Use; Norman Goh, Michael P Short, Nanthi S Bolan, and Christopher P Saint
Part 2: Consumption, Design and Behaviour
5. Considering 'Waste Value' in the Circular Economy; Helene Cherrier, Meltme Tuere, and Nil OEzcaglar-Toulouse
6. Circular by design: A Model for engaging Fashion / Textile SMEs with Strategies for Designed Reuse; Jen Ballie and Mel Woods
7. The ByeBuy! Shop: Testing Shopping Scapes in a Circular Economy; Kirsty Mate
8. What role for Social Enterprises in the Circular Economy?; Ruth Lane and Wayne Gumley
9. Developing Measures for the Waste Management Hierarchy: A South Australian Case Study; Anne Sharp, Lara Stocchi, Vaughan Levitzke and Marcia Kreinhold
Part 3: Waste and Resource Recovery
10. Australian Regional Waste Footprints; Jacob Fry, Manfred Lenzen, Damien Giurco, and Stefan Pauliuk
11. Renewing Materials: Implementing 3D printing and Distributed Recycling in Samoa; Lionel Taito-Matamua, Simon Fraser, and Jeongbin Ok
12. The Current State of Scrap Utilization by Thai SMEs; Singh Intrachooto
13. Unmaking Waste in Construction in the EU and Asian Circular Economy: A Formal Institution Approach; Rita Yi Man Li, Li Meng, Tat Ho Leung, Jian Zuo, and Yuan Wang
14. Municipal Solid Waste Properties in China: A Comparison Study between Tibet, Beijing and Guangzhou; Wenchao Ma, Lina He, Zeng Dan, Guanyi Chen and Xuebin Lu
Part 4: Technology and Systems Innovation
15. Green Manufacturing - From Waste to Value Added Materials; Samane Maroufi, Claudia Echeverria, Farshid Pahlevani and Veena Sahajwalla
16. Towards an Agile Circular Economy for the Building Industry; Tim Mcginley
17. Research on the Sustainable Water Recycling System at Tianjin University's New Campus; Sen Peng, Huiping Cui, and Min Ji
18. Re-Valuing Construction Materials and Components through Design for Disassembly; Philip Crowther
19. Construction and the Circular Economy: Smart and Industrialised Prefabrication; Abbas Elmualim, Sherif Mostafa, Nicholas Chileshe, Rameez Rameezdeen, and Kerry London
Afterword: Vaughan Levitzke
Part 1: History, Theory and Experience
1. From 'Spaceship Earth' to the Circular Economy: The Problem of Consumption; Robert Crocker
2. Can Economics assist the Transition to the Circular Economy?; Martin Shanahan
3. China's Policies for promoting a Circular Economy: Past-Decade Experiences, Future Plans and Success Stories; Xu Zhao
4. Biosolids: The Growing Potential for Use; Norman Goh, Michael P Short, Nanthi S Bolan, and Christopher P Saint
Part 2: Consumption, Design and Behaviour
5. Considering 'Waste Value' in the Circular Economy; Helene Cherrier, Meltme Tuere, and Nil OEzcaglar-Toulouse
6. Circular by design: A Model for engaging Fashion / Textile SMEs with Strategies for Designed Reuse; Jen Ballie and Mel Woods
7. The ByeBuy! Shop: Testing Shopping Scapes in a Circular Economy; Kirsty Mate
8. What role for Social Enterprises in the Circular Economy?; Ruth Lane and Wayne Gumley
9. Developing Measures for the Waste Management Hierarchy: A South Australian Case Study; Anne Sharp, Lara Stocchi, Vaughan Levitzke and Marcia Kreinhold
Part 3: Waste and Resource Recovery
10. Australian Regional Waste Footprints; Jacob Fry, Manfred Lenzen, Damien Giurco, and Stefan Pauliuk
11. Renewing Materials: Implementing 3D printing and Distributed Recycling in Samoa; Lionel Taito-Matamua, Simon Fraser, and Jeongbin Ok
12. The Current State of Scrap Utilization by Thai SMEs; Singh Intrachooto
13. Unmaking Waste in Construction in the EU and Asian Circular Economy: A Formal Institution Approach; Rita Yi Man Li, Li Meng, Tat Ho Leung, Jian Zuo, and Yuan Wang
14. Municipal Solid Waste Properties in China: A Comparison Study between Tibet, Beijing and Guangzhou; Wenchao Ma, Lina He, Zeng Dan, Guanyi Chen and Xuebin Lu
Part 4: Technology and Systems Innovation
15. Green Manufacturing - From Waste to Value Added Materials; Samane Maroufi, Claudia Echeverria, Farshid Pahlevani and Veena Sahajwalla
16. Towards an Agile Circular Economy for the Building Industry; Tim Mcginley
17. Research on the Sustainable Water Recycling System at Tianjin University's New Campus; Sen Peng, Huiping Cui, and Min Ji
18. Re-Valuing Construction Materials and Components through Design for Disassembly; Philip Crowther
19. Construction and the Circular Economy: Smart and Industrialised Prefabrication; Abbas Elmualim, Sherif Mostafa, Nicholas Chileshe, Rameez Rameezdeen, and Kerry London
Afterword: Vaughan Levitzke