Damage Assessment of Structures VIII

Preface
Conference Committee
Keynote Papers
Fault Damage Power and Self-Recovery System of Machinery
Acoustic Emission in Structural Health Monitoring
1. Damage Location and Quantification
Estimation of Crack Parameters through WFEM and Neural Network
Modal Approach for Forced Vibration of Beams with a Breathing Crack
The Experimental Research of Delamination Damage Location Based on FBG Sensors Network in Solid Rocket Motor Shell
Sensor Triangulation for Damage Localisation in Composite Plates
Identification of Small Crack in Beam Structures Using Anti-Resonant Frequency and Wavelet Analysis
Pseudo Strain Energy Density-Based Structural Damage Identification
Removing the Ambiguity in Lamb Wave-Based Damage Localization
Damage Localisation in Thin Panels Using Elastic Wave Propagation Method
Transmission and Reflection Coefficients for Damage Identification in 1D Elements
Probability of Fault Location in a Beam Structure Using the Spectral Element Method and the Spatial Wavelet Analysis
Semi-Quantitative Analysis of Defect in Pipelines through the Use of Technique of Ultrasonic Guided Waves
Identification of Crack Parameters in a Cantilever Beam under Uncertain End Conditions
Structural Damage Detection Accounting for Loss of Data in Wireless Network Sensors
2. Developments in Signal Processing and Algorithms
Investigation Frequency Resolution Effect on Hilbert Spectrum for Instantaneous Vibration Impact Signal Analysis
Crack Detection in Pipe Structures by Lifting Wavelet Finite Element Method
Feature Extraction from Spectral Data Using the Bayesian Evidence Framework
Application of Hilbert-Huang Transform Method on Fault Diagnosis for Wind Turbine Rotor
Ensemble Empirical Mode Decomposition for Machine Health Diagnosis
Gearbox Fault Diagnosis Based on Vibration Signals Measured Remotely
The Response Characteristics of Various Impact Patterns on the Smart Bumper of Automotives
Application of Rotational Measurements in Stiffness Reconstruction of Beams and Frames
Statistical Analysis of Frequency Estimation Methods of Vibration Signal
3.Damage Assessment
Implementation of Reliability-Based Criteria for Structural Integrity Assessment of Existing Structures
The Research of the Effective Moduli of Particle Reinforced Polymer Composites Based on Interface Debonding
Residual Life Assessment of Electricity Pylons - A Case Study
Development of Delamination in Cross-Ply Laminates: Effect of Microstructure
Damage Assessment of a Cracked Bar: Effect of Material Nonlinearity on Vibro-Impact Response
Enhanced Assessment of the Remaining Service Life of a Steel Railway Bridge
Numerical and Experimental Investigation of the Sensing Area of Piezoelectric Elements for Damage Detection with the E/M Impedance Method
Statistical Damage Detection in a Smart Structure under Different Temperatures via Vibration Testing: A Global Model Based Approach
Assessment of the Condition of a Beam Using a Static Loading Test
A Review on Advances of Damage Identification Methods Based on Vibration
Studies on Wavelet Packet-Based Crack Detection for a Beam under the Moving Load
Development of Many-Angular Pin Type Load Cell for a Overload Limiter of a Movable Crane
Spur Gear Crack Propagation Assessment Using Model-Based Analysis and Simulation
Crack Size Estimation Using a Combination of Cross Correlation and Phase Shift Correction in Ultrasonic Time-of-Flight Diffraction Method
Influence of Fatigue Loading on the Engineering Critical Assessment of Steel Catenary Risers in Sour Deepwater Oil and Gas Developments
The Effects of Blockage on the Propagation of Acoustic Waves in the Liquid-Shell Coupled System
Fractal Theory Based Damage Assessing Method of Acoustic Emission Test
Results of Nondestructive Inspection of Layered Composites Using IR Thermography and Ultrasonics
Bayesian Logic Applied to Damage Assessment of a Smart Precast Concrete Element
Assessment, Strengthening and Validation of Prestressed Damaged Beams
Detection of Various Damages Based on Piezoceramic Optical Fiber Sensor
Applicaton of Modal Filtration for Damage Detection of Rotating Shaft
4. Condition Monitoring
On Optimal Sensor Placement Criterion for Structural Health Monitoring with Representative Least Squares Method
FE Model Updating for Damage Detection - Application to a Welded Structure
Monitoring Vertical Loads on the Bearings of the High Coast Suspension Bridge
The Design of Piezoelectric Transducer for Structural Health Monitoring Using Longitudinal Vibration Modes
Particle Impact Damping in Two Dimensions
Smart Rotating Machines for Condition Monitoring
GA-SVR Based Bearing Condition Degradation Prediction
Harvesting Vibration Energy for Structural Health Monitoring in Aircraft
Condition Monitoring of Textiles Using Optical Techniques
Application of Compressive Sampling for Accelerometer Signals Used in Structural Health Monitoring
Research on Real-Time Process Monitoring Technology and System for High-Speed Turbopump
Gearbox Condition Estimation Using Cyclo-Stationary Properties of Vibration Signal
Analysis of the Response of a Rotor System Containing a Breathing Crack
Thermoelectric Energy Harvesting for Wireless Sensor Systems in Aircraft
Condition Monitoring of CI Engine Running on Biodiesel Using Transient Process
Bispectrum Analysis of Motor Current Signals for Fault Diagnosis of Reciprocating Compressors
Experimental Study on Rubbing Acoustic Emission for Rotor-Bearing System Based on Parameter Analysis
Investigation of Condition Monitoring of a Flap System
5. System Diagnostics and Prognosis
Non-Linear Identification of a RC Element Using Time-Frequency Instantaneous Estimators
A Steam Turbine Fault Diagnostic System Based on the Web and Database Technologies
Research on the Fault Diagnosis Technology of Diesel Engine Based on the Instantaneous Speed
Diagnose and Analysis of Coupling Faults on Nonlinear Rotor-Bearing-Seal System Prediction
Fault Recognition Method of Rolling Bearings Based on Volterra Series and HMM
A Novel Fault Diagnosis Method Using PCA and ART-Similarity Classifier Based on Yu's Norm
Wavelet Selection for Bearing Defect Diagnosis
Research on Nonlinear Process Monitoring and Fault Diagnosis Based on Kernel Principal Component Analysis
Shaft Crack Analysis and Diagnosis for the 600MW Steam Turbine Generator
Experimental Investigation of Pedestal Looseness in a Rotor-Bearing System
Fault Diagnostics Based on Pattern Spectrum Entropy and Proximal Support Vector Machine
Signal Processing by Energy Normalization Method Based on Wavelet Packet
Application of Cyclic Correlation Analysis to Gear Damage Detection
Feature Extraction for Damage Detection in Structures Based on Nonlinearity Analysis
Diagnosis of Rolling Elements Bearing Based on Inverse Autoregressive Filter
Time-Varying Output-Only Identification of a Cracked Beam
Defects Diagnosis of Bearing by Means of Acoustic Emission and Continuous Wavelet Transform
6. Damage Mechanisms
Particle Swarm vs. Evolutionary Optimization Techniques in a Multiobjective Framework for Damage Identification
Damage Identification Using Response Surface Methodology
Simulations of a Dual-Rotor System with Local Rub-Impacts Based on Rigid-Flexible Multi-Body Model
Spectral Element Modelling of Wave Propagation and Impedance Based SHM Systems
Numerical Study of Thickness Distribution of Stretch-Blow Bottles for Defects Prediction
Experimental Verification and Comparison of Mode Shape-Based Damage Detection Methods
Modal Identification of an Experimental Model of Masonry Arch Bridge
7. Fatigue Damage
Study and Application of Grey System Theory for Fatigue Life Prediction
Life Prediction of Stainless Steels under Creep-Fatigue
Dynamic Behaviour of Single Lap-Jointed Cantilevered Beams
Fatigue Damage Evaluation and Retrofit of Steel Orthotropic Bridge Decks
Fatigue Safety Evaluation of Existing Reinforced Concrete Bridges
Fatigue Properties Assessment of Corroded Cable
8. Structural Integrity and Advanced Methods of NDT
Influence of Disbond Defects on the Dispersion Properties of Adhesive Bonding Structures
Integrity Strain Response Analysis of a Long Span Cable-Stayed Bridge
Updating of Finite Element Model in Considering Mode Errors with Fuzzy Theory
A Method for Acoustic Emission Source Identification Based on Optimisation
Automatic Image Measurement Technology in Endoscopy NDT
Acoustic Emission Monitoring of Mechanical Seals Using MUSIC Algorithm Based on Higher Order Statistics