e-Engineering & Digital Enterprise Technology VII

Preface
Conference Organizers
A New Design Method-Deep-Layer Synthesized Design Method of Full Functions and Full Performances of Product
Effects of Residual Stress on Interfacial Bonding Strength of WC Coating
Global Manufacturing: Reconfiguration of Machines in Addressing Changing Customer Requirement Scenarios
A Web-Based Customization Product Design System
Technology for Locating System of the Laying Pipe Manipulator
Parametric Oscillation Model of Crane with Lifting Motor Reducing Load Swing
Study on the Integrated Development System for Carbody of Multiple Unit Based on Digital Prototype Technology
Dynamic Response Analysis of Working Device of Hydraulic Excavator under Working Impact Loading
The Numerical Simulation of Horizontal Straightening for 60 kg/m Heavy Rail with Original Curvature
Research on Capacity Balancing Model in Iron & Steel Enterprise
The Optimal Structure Design of Mold in Powder Injection Molding Based on the Numerical Simulation
Experimental Study on the Belt Grinding Mechanism for Aluminum Alloys
3D Mechanical Models Retrieval Based on Combined Histograms for Rapid Product Design
Research on CNC Turning System Based on STEP-NC
An Intelligent Control System for Digital Workshop Production
Study on Vibration Friction Mechanism and Vibration Response Analysis Based on Vibration Compaction System
Service-Driven Networked Collaborative Manufacturing Execution Platform for Extended Enterprises
Research on Fuzzy-PID Control for a Tension System of Rotary Magnetorheological Damper
The Research of Electronical Control System Based on OSEK/VDX
Monitoring of Drill Wear State Using Wavelet Packet Decomposition (WPD) and Welch Spectrum
Numerical Design and Analysis of a Certain White Bodywork
Dynamics Analysis of Rotor Systems in Large Centrifugal Compressor
Processing Micro-Gear Based on Bio-Etching Method
Numerical Simulation of Whole Impeller for 5-Axis Machining Based on UG
Generation of Optimized Assembly Sequences Based on Priority Rules Screening
Design of Step Motor Fuzzy Control System and its Application
Design of Self-Regulating Fuzzy Control System for Vacuum Sintering Furnace
Application of Compound PID Control in the DC Servo Motor
Design of Compound Fuzzy Controller for Multivariable Systems
Design System Development of Tool Magazine for CNC Machine Tools
Research on Vibration and Instability of the Double-Span Beam Base on Transfer Matrix
A Dynamic Group Service Recommender System in Migrating Workflows
Security Solution of Mobile E-Commerce Based on WAP
Application of the Back Propagation Neural Network Model on the Supplier Evaluation in E-Manufacturing Environment
Car Seat Backrest Static Strength Experiment and Simulation
Multi-Agent Approach for E-Commerce Negotiation
Study a Fuzzy Inference System on the Supplier Evaluation in E-Manufacturing
An Engine Dynamic Signal Testing System Based on Virtual Instrument Technology
The Collaborative Design and Manufacture of Injection Molds Based on the CSCW
Dimension Parameter Transfer Method Based on Constraint Satisfaction Priority in Variant Design
Study of Water Temperature Control Strategies for Fuel Cell Electric Vehicle Engine System
Process Interoperability Framework Based on PSL for Collaborative Product Design
Research of Workflow Modeling System for Business Process Management
Research and Application on Vibrating Style Drier with Conduction and Heat Transfer
Design Object Planning of Vehicle NVH Performance Improvement Based on HOQ
A HLA-Enabling Method in Collaborative Simulation Environment for Complex Product Development
Dynamic Analysis of Vibration Compaction System Base on Transfer Matrix Method
Development of Compliant Tool System of Digitalized Precision Polishing for Aspheric Surfaces
Study on Speed Control System of Fluid-Driven In-Pipe Robot
Numerical Analysis on Starved Elastohydrodynamic Lubrication Characteristics of Spiral Bevel Gears
The Study of Meshing Performance for Single Screw Compressor Based on Contact Analysis
Vibration Analysis of Aeroengine Compressor Blade-Disc Coupling System
Finite Element Analysis of the Effect of the Compressive Loading on Fatigue Crack Growth under Different Loading
A New De-Noising Arithmetic in the Output Signal of FOG
Dynamic Simulation and Control Strategy of Centrifugal Flying Shear
The Application of Reverse Engineering in the Design of Electric Vehicle Panel
An Access Control Model for Workflow in Service Oriented Environment
A Ring Type Standing Wave Ultrasonic Motor Using Cantilever Type Bending Transducer
Geometric Modeling for Unitary Rotor of TMP by UG NX CAD
Effects of Lubricant Properties on Lubricating Performance of Tripod Sliding Universal Joints under Thermal Condition
Motorcycle Dynamics Modeling and Simulation Based on Road Simulation
Research on Impact Mechanism of Hydraulic Rock Drill
Motorcycle Dynamics Simulation Based on Real Road Load
Actuating Mechanism and Analysis of a Square-Type Rotary Ultrasonic Stator Using Longitudinal Vibration Transducers
The Modeling and Simulation for Numerical Control Lathe's Feed System Based on MATLAB
Reliability Sensitivity Analysis of Sliding Bearing Based on Virtual Simulation Technology
Foot Shape Reconstruction Based on a Monocular System Using Structured Light Projection
On the Flatness Uncertainty Estimation Based on Data Elimination
Analysis of the Sharp Resonance Control Synchronization for Dual Motors Exciting Nonlinear System Based on Sliding Mode
Design and Implementation of a MEMS Design Process Description Language- MDPDL
The Method of Analyzing the Reliability of Tooth Surface Contact Strength Based on Finite Element Method and Weibull Distribution
Research on Parameterized Modeling Method of Parts and Components Library for Rapid Response System
The Tension Control Model Based on MRF Damper
On the Generation of the Specification Surface Model of Planar Feature with Flatness
Modeling and Simulating of Bending Rolling Valve Controlling Cylinder System
Research and Application of Workflow Technology in Vibration Roller Development
Product Configuration Knowledge Modeling Using Extend Object Model
3D Parametric Modeling of Numerical Simulation on Oblique Cutting
Manufacturing Execution System Based on a Production Process Modeling
The Thermal Error Prediction of NC Machine Tool Based on LS-SVM and Grey Theory
The Research of Dynamic Optimization Method on Automobile Shock Absorption Twist Bar Spring Design
Feature Line Extraction of the Triangular Mesh Model Based on Curvature and PCA
A Revised Critical Chain Method and Optimization Model
Additive Consistent Fuzzy Complementary Judgment Matrix's Euclidean Space Distance Weighting Ranking Method
Modeling and Optimizing for Flexibility in Business Processes
Cold Extrusion Forming of Copper/Aluminum Clad Composite
Study on 7D Planning Model of Synthesized Design Method Based on Systems Engineering
Theoretical Modeling and Experimental Verification of Surface Roughness in Abrasive Jet Finishing
Effect of Non-Uniform Temperature Field on Piece Rolled by Three-Roll Cross Wedge Rolling
Numerical Simulation of Non-Circular Hole Joint Precision Forming
Applications of BPNN in Analyzing LHM Elemental Basic Structure
Determination of Chip Velocity Field in Metal Cutting
Numerical Simulation of the Temperature Distribution during the Metal Laser Sintering of Parts
Investigation of Dynamic Performance of Super-High Speed CBN Grinding Wheel
Some Phenomenological Characteristics of Medium-Thick Sheet Metal Extrusion Process
Assessment and Improvement of Force Computations for Sheet Metal Extrusion
Research on Fine Blanking Process with Stepped-Edge Punch
Finite Element Analysis of Double Curvature and Large-Area Workpiece in Hot Gas Bulge-Forming of Polycarbonate (PC) Sheet
Manufacturing Errors Effects on Disturbing Torque of Aerostatic Bearings
Modeling and Calculation of Dynamic Performances of NC Machine Tool Considering Linear Rolling Guideway
Research on Influence of Process Parameters on Sheet Metal Extrusion Force
Neural Networks Control of the MH/Ni Power Battery Positive Mill
Study on Kinematics of Shape-Adaptive Tool for Free-Form Surfaces Compliantly Polishing
Impact Stress Field Simulation on Solenoid Valve during the Impulsive Load
Process Optimization of Large Turbine Blade Casting Base on Numerical Simulation
Wear Mechanism and Preventive Measure of Electrode in Micro-EDM
Vehicle Dynamics Control for Tractor Semitrailer Lateral Stability
Modeling of Dimensional Errors in Slender Bar Turning Process Using Artificial Neural Networks
Dimensional Synthesis of a 2UPS-UPR Parallel Machine Tool
Application of FEM Simulation to the Effects of Working Parameters on Isothermal Forging of 7075 Aluminum Alloy
The Rapid Metal Tooling Process Based on Layered Manufacturing
Forming 3D Sheet Metals by Means of Continuous Rolling Method
Finite Element Analysis of Temperature and Crown of Rolls in Hot Strip Rolling
Optimization of Structural Parameter of Shape-Adaptive Tool for Compliant Polishing of Aspheric Parts
YAG Laser Cutting of Multi-Layer Soda-Lime Glasses
Thermal Simulation of Peel Grinding Process
Analysis of Dynamic Stiffness and Damping of Partial Porous Aerostatic Thrust Bearings
A Study of Formation Mechanism of the Spiral Mark Defect in Cone-Type Rotary Piercing Process
System of Networked Technical Service Oriented Product Lifecycle
Analytical Modeling of Shear Band Spacing of Serrated Chip in High Speed Cutting of Aluminum Alloys
Construction of Orthogonal and Symmetric Multi-Wavelets with Vanishing Moments
The Determination and Simulation of Boom's Reasonable Derricking Acceleration
Parametric Design and Development of Standard Mould Part Library Based on UG
Study on Enterprise Integration Platform Based on Web Services
Modeling of e-Manufacturing Information Integration Platform
A New Implementation for Ontology Mapping Based Enterprise Semantic Interoperation
Research and Implement of Visual Simulation System for Automobile Gearbox Assembling Line
Pedestal Looseness Fault Analysis of Overhanging Dual-Disc Rotor-Bearing
Service-Oriented Manufacturing Execution Systems Supported by IPSS
A Framework for Configuring Service-Oriented Manufacturing Executive System
Research on the 3D Model's Setup of Diamond Manufacturing Center with Fifteen Shafts
Research of Micro-Stereolithography System with Dynamic Pattern Generator
Static Balance Method for a Special Gyroscope Rotor with a Spherical Cavity
STEP-Compliant NC Simulation System Modeling
Research on Knowledge Base System for Semantic SOA
Performance Analysis of Spindle System of NC Machine Tools
Research on Product Shared Information Semantic Model in Digital Design
Supporting Complex Access Control Policy in PDM System
Modeling of Nutation Drive with Rolling Teeth
Experimental Study on Micro-End Lapping Mechanism
Robot Surfacing System for Flexible Remanufacturing Based on Off-Line Programming
Analysis of the Influence of the Restraining Chain on the Posture Error of Movable Platform of Hybrid Machine Tools
Modeling and Simulation of Dynamic Alliance Task Scheduling
Erection of Upper Ontology and Enrichment of Knowledge Base of Production Workshop in Manufacturing Enterprises
A Two-Stage Cell Formation Approach with Machine Performance
Research of Flexible Dynamic Scheduling Problem Based on Genetic Algorithm
Study and Execution of Advanced Batch Production Planning System for an Aerospace Industry
Constructing a Web-Based Fuzzy Expert System for Aeroengine Fault Diagnosis
Study on Knowledge Base Construction for the Network Teaching Resource Based on Semantic Web
Research on Modeling and Reasoning Framework of Ontology-Based Equipment Selection and Matching Expert System in Fully Mechanized Caving Face
Development of a Digital Mockup for Tunnel Boring Machine
Virtual Prototyping of Belt Conveyor Based on Recurdyn
Study of Toleranced Products Modeling Based on Virtual Reality
Stiffness Analysis of 3-RPR Planar Parallel Mechanism to the Stiffness Control
Analysis and Optimization on Impeller Assembly Structure
A Human-Centered Virtual Assembly System
Analysis of Key Technologies for Aeroengine Maintenance Based on Virtual Reality
Multi-Body Dynamic PD Control of Concrete Pump Truck Arm System
Initiative Design of Tooth Profiles with Small Sliding Coefficients
Calculation Method of Mechanical Structure Complex Time-Dependent Reliability with Blind Number Theory and its Implementation
Research on New Numerical Calculation Method for Reliability of Mechanical Strength Based on Blind Number Theory
A New Modeling Method for Mechanical Friction Based on Data Mining
A Sort-First Parallel Rendering System for CRH3 Virtual Assembly
The Static and Dynamic Stiffness Analysis and Strengthening Design of Internal Grinder Sharper Based on the CAE
Mandibular Virtual Reconstruction Surgery Guided by Mimics
The Case Study on Model Reconstruction Method for Inner Un-Measurable Parts
Study on the Nonlinear Characteristic of a Rotor-Bearing System between the Continuum Model and Discrete Model
TBM Motion Simulation: System Configuration, Motion Analysis and OpenGL Performer Based Realization
Aerodynamic Numerical Simulation in the Process of Car Styling
Nonlinear Finite Element Analysis and Test of Lateral Loading for Two-Post ROPS
Research of the Virtual Prototyping Technology Based on Laser Processing
Vehicle Dynamics Control Based on Linear Quadratic Regulator
Network Security Prevention Model Based-Immune
Fault Diagnosis of Roller Bearing Conditions Using ANFIS
A Novel Approach to Hand Gesture Recognition for Virtual System Based on Adaptive Background Model
A Framework of New Generation Intelligent CNC System
Research on the Application of Secondary Regulating Technique in Loader Transmission System
Robot System to Detect Line Based on ARM9
Adaptive Fuzzy PID Designed for Solenoid Valve Test System
Intelligent Control of CNC System Based on STEP-NC
Vision Monitoring Algorithm for Work Condition of NC Processing
Chord Error Closed-Loop Controlled NURBS Interpolator and Trajectory Planning
Simulation of Splicing Cavity Shape Based on FLUENT
Controller Design of Output Feedback MIMO Networked Control Systems with Multiple Packet Transmission
A Multi-Agent-Based Automatic Negotiation for Distributed Manufacturing
Design of Battlefield Weather Environment Automatic Collection and Processing System
Based on WLAN for Tower Crane Fleet Communication System
Determination of Material Parameters in the Chaboche Unified Viscoplasticty Model
Research on Tool Cutting Monitoring System Based on Cutting Force and Workpiece Surface Image Texture
Design and Research on the Mechanical Adaptive In-Pipe Robot Drive Unit
Garbage Crusher Fault Diagnosis Based on RBF Neural Network
The Research on Blunting Control Strategy of Throttle Signal during Auto-Shifting Process
The Application of Optical Rotation Principle in Density of Oil Mist Measuring
Quality Control in the Fabrication of Hanging File Stent Components of Automotive Transmission
The Promotion of Software Reliability for Vehicle Navigation System
Research into the Quality Control Technology in Machining Process of Enterprise Alliances Based on Procedure Oriented Parameter
Identify Steel Ball Surface Defect Based on Combination of Dynamic and Static RBF Neural Network
The Research of Automatic Measuring System on Stone Milling Force
The Application of SPC in the Quality Management System of the Working Procedure in the Production Shop
Design and Implementation of a Data Processing and Visualization System for STEP-NC Programs
An Improved Representation for Object Tracking Algorithm
Design and Realization of Roughness Measurement System Based on DM642
Research on Measurement of Viscosity Based on Cylinder Rotation
Dynamic Simulation of the Drill Grinder Based on the Tripod Parallel Universal Wrist
A Low Volume Production Process Capability Analysis
Query Processing of RFID Data with Object Trajectory in Manufacture and Logistics
Two-Echelon Supply Chain Coordination with Vendor Managed Inventory
Techniques for Micromachining Using Thiobacillus Ferrooxidans Based on Different Culture Medium
Analysis Model for Energy Consumption in Manufacturing Enterprises Based on Input-Output Theory and its Applications
Analysis and Estimation of Processes Capacity Based on Quality Control
Virtual Force Field Integrated with Human Avoiding Obstacles Strategies for Robot
An Outsourcing E-Maintenance System for Improving Maintenance of an Industrial Product Service System
Dynamics of Multi-Disk Rotor System with Rub-Impact Fault
An Interactive 3D Assembly Process Model
Plant Refurbishment Options Based on the Life Cycle Assessment
Study on Kinematical Characteristics of 2PTT-TPT Parallel Machine Tool Based on Virtual Prototype
Thermal Stress of Blast Furnace Hearth Linings under Erosion State
Research on Sketch Contour Generation in Reverse Engineering
Modeling and Simulation of Implant-Supported Fixed Partial Dentures Prosthodontic
Research of the Semicircle Trench Belt Conveyer
Pipeline Design and Layout in Virtual Environment
The Model Analysis of Molding Sand's Removal and Mechanism Research Using High Pressure Water-Jet Technique
Localization and Control System of Mobile Robot Based on Wireless Sensor Network
Research on Multi-Actuators Speed Control System in Large-Scale Ship
Mechanisms for Sawing of Refractory Bricks with Diamond Blades
The CAE Analysis of Fork Truck Frame System Based on ADAMS and ANSYS
Application of Diamond Tools on Finish Turning Al-Si Alloy
Finite Element Simulation and Analysis of Size Effect in Micro-Milling Process
Research on the Properties of Coaxality Error Objective Function
Generation and Suppression of Weld Joint Offset for Tailor-Welded Blank in Multi-Point Forming
Research on Workpiece Machining Precision PID Control Model in Closed-Loop Manufacturing Systems
Research on Dynamic Characteristics of Electro-Mechanical Control Type CVT
Virtual Design of Controlled Five-Bar Mechanism
Technological Study on the 3D Collaborative Design System Oriented Project Management
Research on a Three-Dimensions Micro-EDM System
The Fitting Formula of Outflow Coefficient for the V-Cone Flow Meter Based on FLUENT
The Research of Big Internal Cooled Backup Roll with Numbers of Sleeves Assembled Together
Reliability Design of Double Circular-Arc Cylindrical Gear Transmission
Modal Analysis of a Biglide parallel NC Grinder for Helical Drill Point Machines System Based on ANSYS
Study on Misalignment of Focus Position in Laser Metal Deposition Shaping Processing
Design of Storage Management Information System and Analysis of the Information Flow
An Particle Swarm Optimization Approach for Assembly Sequence Planning
A Two-Phase New Product Introduction Model
Target Locating Technology and System Exploitation Based on the GPS Technology
Evaluation Method and Simulation Analysis of Gap Roundness Error
Finite Element Analysis of the Forging Process for Half-Shaft Bushing
Study on Virtual Simulation Machining of Double Circular Arc Profile Spiral Bevel Gear
Wear Rate Prediction and Analysis of Metal-Matrix of Ni-Based Super Alloy onto Cast Iron by Laser Cladding
Monitor of Remote Semi-Autonomous Robots in WLAN
Application and Key Technique Research of Monitoring and Control System for Drawing and Coving Workshop
Study on Fractal Characteristic of Surface Micro-Topography of Micro-WEDM
Computerized Tooth Profile Generation and Undercut Analysis of Gears Manufactured With Pre-Shaving Hobs
Numerical Simulation of Granite Sawing by Discrete Element Method
Simulation and Experiment Study for Spindle of Numerical Control Machine Tool
A New Type of Parallel Robot Manipulator Kinematics Simulation and Analysis of Movement Characteristics
Safety Characteristic of HSS in Car Side Impact
Research and Realization of a New Curve Grinding Method
Fault Diagnosis of Engine Based on Improved Dempster-Shafer Information Fusion Method
Research on Automobile Panel Case Retrieval Methodology
Job Shop Scheduling Problem Based on Requirement Forecasting Aiming at Instant Customerization
Study on the Kinematics of 3-TPS Hybrid Machine Tool
Application of 3D Optical Measuring System in Auto Shock Absorber's Quality Inspection
Experimental Study and Simulation of Cutting Forces during the Deep Sawing of Granite
A Study on Dynamic Process Quality Control Method into Supply Chain
Manipulability Analyses of the 3-DOF Parallel Machine Tool
Research on Data Processing in Network Supported Collaborative Design
Research on the Lean Six Sigma Supplier Surveillance Process Management
Numeric Analysis for Resonant Frequency of Rotating Blade
Study on System Design and Control Methods of Polishing Robot System
Key Technology and System Implementation of Distributed Collaborative Design in Hydraulic System
Fuzzy Synthesized Evaluation of Product Quality of Machine Tool Based on Harmonious Design Method
Design and Simulation for Multi-Axis HS-WEDM System
Virtual Design and Structural Optimization of Dry Twin Screw Vacuum Pump with a New Rotor Profile