Recent Development in Machining, Materials and Mechanical Technologies

Preface, Committees and Sponsors
Chapter 1: Materials Research and its Applications
A Dye Sensitized Solar Cell with ZnO-Coated TiO2 Electrode and Carbon Nanotubes Electrode for High Power Conversion Efficiency
Influences of MOS Device Characteristic under Different Oxygen-Dose Participations in the Silicon Substrate
The Estimation of the Mechanical Property of the Porous Material by Numerical Analysis
Acidic Treatment of CaO-Based Materials for Medium-High Temperature CO2 Capture
Characterization of Novel Sorbents for Mercury Removal at Elevated Temperature
Development of Recovery System for Extracting Silicon Carbide from Photovoltaic Industry Abrasive Slurry
Effect of Added Cr3C2 on the Microstructure and Mechanical Properties of WC-SiC Ceramics
Effect of Al Addition in Cast Nickel Base Superalloys, Inconel-738 on Microstructures and Oxidation Behaviors at 900 degreesC and 1000 degreesC
Effect of Sintering Condition on the Microstructure and Electrical Properties of Lead-Free (Na0.5K0.5)NbO3 - Bi0.5(Na0.95K0.05)0.5TiO3 Ceramics
Electroless Ni-P/Diamond/Graphene Composite Coatings and Characterization of their Wear and Corrosion Resistance in Sodium Chloride Solution
ESD-Reliability Analysis and Strategy of the GaN-Based Light-Emitting Diodes
Evaluation of Surface Properties and In Vitro Characterization of Surface Modified In Situ TiO2 Nanofibers
Preparation and Characterization of Protective LSM Coatings Produced by Atmospheric Plasma Spraying
Preparation of Electroless Nickel-Phosphorous-TiO2 Composite Coating for Improvement of Wear and Stress Corrosion Cracking Resistance of AA7075 in 3.5% NaCl
Preparation of Nanocrystalline Cubic Boron Nitride Coating by Magnetron Sputtering Method
Production Processes and Characteristics of Porous Alumina with Air Bubbles Introduced into Slurry
The Dependence of ECR-CVD Processing Parameters on Deposition Uniformity of Hydrogenated Amorphous Silicon (a-Si:H) Films
Thermodynamic Possibilities and Limits for Producer Gas Desulfurization and HCL Related Interferences for Zn, Mn, Ce and La Based Sorbents of Sulfur Compounds
Thin-Film Growth Rate Monitor by Normal-Incidence Reflectance
Efficiency Analysis of Gas Turbine Combined-Cycle Fed with Synthetic Natural Gas (SNG) and Mixture of Syngas and SNG
Optimization of Operating Conditions for an SOFC Stack
Oscillation Phenomenon of the Cell Performance for an Anode-Supported Solid Oxide Fuel Cell with a Low-Porosity/High-Thickness Anode Structure
Rate Effects on Dynamic Properties of Liquid under Nanoconfinement
The Thermal Image Analysis and Fuel Conversion Characteristics on Porous Media-Catalyst Hybrid Reactor in Dry Auto-Thermal Reforming
Viscosity Effects of Spray Characteristics in Air-Blast Atomizer
Chapter 2: Material Processing Technologies
A Numerical Simulation Study on Machining Performance for Front Face Circular Grooving Using Special Structure Milling Cutters - Part 1: Simulation Method and Examination of Machining Capacity
A Numerical Simulation Study on Machining Performance for Front Face Circular Grooving Using Special Structure Milling Cutters - Part 2: Simulation Results and Discussions for Machining a Groove with Rectangular Sectional Profile
A Study on Tool Damage of Threading Tap in Screw Cutting of Stainless Steel 15-5PH
Air Jet Assisted End Milling of Titanium Alloy Ti-6Al-4V ELI at High Cutting Speed
Assessment of Geometrical Deviations of Machined Part by Using Coordinate Measuring Machines
Basic Study on Thermo Chemical Turning Method for Metal Bonded Diamond Wheels
Characterization of Machining Damages Generated by a Piercing Process in CFRP Laminates
Damage of PVD-Coated Cutting Tools Due to Interrupted Cutting of Ni-Based Superalloys
A Novel Cutting Concept of CFRP Composites for Extending the Life of Tool
Development of the Local Polishing Technique for Single-Crystal SiC Wafer
Effect of Cutting Conditions on Tool Wear in Driven Rotary Cutting of Maraging Steel
Effect of Cutting Force Control on Cutting Characteristics of CFRP in Diamond Saw Cutting
Effect of Dry Ice Blasting on Removal of Loading Carbon Chips on Wheel Surface
Effect of High-Pressure Coolant Supply on Chip-Breaking and Tool Wear in Machining of Stainless Steel
Effect of Work Material's Hardness on Cutting Performance of TiAlN- and CrAlN-Coated Cutting Tools
Effects of Cooling Conditions on Thermal Crack Initiation of Brittle Cutting Tools during Intermittent Cutting
Effects of Cutting Fluid Application in the Performance of the Nimomic 80A Turning
Effects of Guide Groove Shape on Chip Controllability for Chip-Guiding Turning
Effects of Supplying Oil Mist and Water Mist with Cold Air on Cutting Force and Temperature in End Milling of Difficult-to-Cut Materials
Estimating the Cutting Characteristics of Spiral Tap - Tool Edge Temperature and Fluctuation of Cutting Forces
Evaluation of Grinding Performance by Mechanical Properties of Super Abrasive Wheel - Evaluation of Grade by Grinding Force
Evaluation of Machining Forces in Asymmetrical Face Milling of Cast Iron DIN GGG50
High Precision Turning of Hardened Steel by Use of PcBN Insert Sharpened with Short Pulse Laser
High-Efficient Regeneration of Grinding Performance Using Adhesive Films in Dry Grinding of Carbon
Improving the Polishing Effect of Stainless Tube by Magnetic Finishing with Gel Abrasive
Influence of the Cutting Fluid on Tool Edge Temperature in End Milling of Titanium Alloy
Influence of Tool Wear on Cutting Characteristics in Ultra-Precision Cutting
Investigation of Machinability in Milling of Difficult-to-Cut Materials Using Water Soluble and Water Insoluble Cutting Oil
L-Shaped Machining of Anisotropic Woods with a Fine Wire Cutting Tool
Machinability Evaluation of Inclined Planetary Motion Milling System for Difficult-to-Cut Materials
Machine Learning of Cutting Conditions in Drilling Using Artificial Neural Network
Machining Feasibility of a New Developed Medium in Electrical Discharge Machining
Near-Dry Machining of Titanium Alloy with MQL and Hybrid Mist Supply
Shear Cutting Behaviors in Thermosetting and Thermoplatic CFRP Laminates
Simulation Analysis and In-Process Measurement of the Workpiece Temperature Distribution in Large Surface Grinding
Size Effect in Machining on Initial Tool Wear in Heat-Resistant Alloy Cutting
Stability of Adhered Material to the Cutting Edge of a Cermet Insert in Turning of an Austenitic Stainless Steel
Study on Applicability of Large-Area EB Irradiation to Micro-Deburring
Study on Surface Characteristics of EDMed Surface with Nickel Powder Mixed Fluid
Study on Ultrasonic Cavitation-Assisted Micro-Endmill Milling
The Effect of Eccentricity of the Tool on the Surface Morphology of FSJ Joint
The Machinability of CFRP with Cutting Movement of End-Milling
The Research of FPGA-Based Short Current Protection for Micro Electrochemical Machining
Tool Wear Characteristics in Near-Dry Cutting of Ni-Based Superalloy
Wear Monitoring of Steel Ball of a CNC Machining Centre by Using Surface Roughness of Finished Test Pieces
A Novel Tape and Diamond Process Developed for Polishing Hard Substrates
Effects of Filler Compositions on Mechanical and Physical Properties of the Dissimilar Resistance Spot Welded between Aluminium Alloy and Carbon Steel
Electric Arc Furnace Dust Treatment Process by Iron Powder
Heat Treatment and Mechanical Testing of AISI H11 Steel
Mechanical Properties Evaluation of Metal Components Repaired by Direct Metal Lamination
Smoothing of GaN Substrate by Ultraviolet Assisted Polishing in KOH Solution
Study of Electroplated Nickel Layer Thickness and Saw Parameters on Cutting Performance in Diamond Wire Sawing of Sapphire Ingots
Design of Rotoformer Mechanism and Cooling Steel - Conveyor in Sulfur Granulation Systems
Effects of Focusing Condition on Micro-Welding Characteristics of Borosilicate Glass by Picosecond Pulsed Laser
Gloss Evaluation of Hairline-Finished Metal Surface Using Patterned Area Illumination Method: Reproduction of Gloss Evaluation by Ray Tracing
Investigation of Crack Generation in a Notch during Diameter-Enlargement Working Method Processing
Recommendation of a Measure for Enhancing the Precision of Dimensions of Foil Products in Single Point Incremental Forming Technology
Simulation of Cracking Behavior in Planar Solid Oxide Fuel Cell during Thermal Cycling
Tensile Strength and Metallurgical Analysis in Anodized Al/Cu Joint Using Friction Stir Welding
Viscous Dissipation Effects on the Coating Resin Flow Characteristics in High-Speed Optical Fiber Coating Process
Behavior of MnS on Belag Formation and Observation on Carbide Tool
Chapter 3: Applied Research in Materials Science
Development of a Computer Generation Holography for Generating Square Matrix Light Spots Applied to the Laser Patterning System
Numerical Analysis for the Growth of Epitaxy Layer in a Large-Size MOCVD Reactor
Modelling of Granular Solid-Structure Interaction: A Comparative Study Using Conventional FEM Approach and Linked DEM-FEM Approach
Simulation of the Effective of Friction on the Deformation in Equal Channel Angular Pressing (ECAP)
Simulation of Effective Stress and Temperature Field of the Die and Workpiece during ECAP of Pure Titanium at Different Ram Speeds by Finite Volume Method
A Parametric Study of Diesel Oxidation Catalyst Performance on CO Reduction in Diesel Dual Fuel Engine Exhaust
Application of Taguchi Method to Optimize the Operating Parameters for a Solid Oxide Fuel Cell
Combination of Au Dielectrophoresis Chip and Optical Tweezers for Cell Culture
Concentration Gradient Effect on the Capturing Ratio of Nanopore for DNA
Development of a Portable Optical Interferometry Microscope System
Nanopore Positive Pulse Detection of DNA with Salt Gradients
Kinetics of Microwave Vacuum Drying of "Cat Chu" Mango in Mekong Delta - Vietnam
Swelling Behavior of Soft and Biological Materials
Chapter 4: Applied Mechanics and Mechanical Technologies
A Novel Mechanical Design of Automatic Laser Target-Scoring Systems
A Double-Sided In-Plane Lateral Comb-Drive Actuator Fabricated by a Plaster-Based 3D-Printer
Controlling Wrinkling and Flatness during the Processing of the Bend Section of a Pipe by Applying Vibration to the Mandrel
Theoretical Modeling and Fabrication of Two-Dimensional Microstructures by Using Micro-Anode-Guided Electroplating with Real-Time Image Processing
An Analysis of the Lubrication Characteristics of Mechanical Seals with Parallel Sealing Faces Using an Average Flow Model
Analysis of Dynamic Contact and Carrying Capacity Factors for Super-Modulus Pinion and Rack
Concentrated Photovoltaic System with Multi-Curvature Fresnel Concentrator
Consideration of Interlock System Applicable to Pneumatic Driving Systems as the Safety System (BS/EN764-7)
Design Calculation for Wedge Cam of Small Roller Centering Three-Jaw Jig
Design of Shielding System for Impulse Ground Penetrating Radar Applications
Development of Herringbon-Grooved Aerodynamic Journal Bearing Systems for Ultra-High-Speed Rotations
Dynamic Analysis of Offset Printing Press Gear-Cylinder-Bearing System under Time-Varying Meshing Stiffness Effect
Fault Diagnosis Research for Mine Fan Based on the CFD
Gradient Force of Electromagnetic Strength to Drive Precisely the Small Mass
Implementation and Validation of the Jet Flame Model Using C++ Open Source Codes Computational Fluid Dynamics Software
Investigation of Optimum Assembly Tolerance for a Machine Tool Spindle
Investigations of Cylindrical and Conical Whirl Instabilities on Hydrodynamic Journal Bearings
Non-Linear Analysis and Modeling of the Structure with Bolted Joints
Optimization of Low-Noise and Large Air Volume Blower Based on Load Characteristic
Research on Acoustic Radiation Characteristic for Cylindrical Structure with Elastic Plate Cap in Mid-Frequency Region
Researching and Calculating the Effect of the Slides and the Nozzles' Structural Positions of "Rice Sorting Machine"
Testing and Improvement of Static Performance of Proximity Sensor for a Mobile Robot
The Data Combining Method and the Forming Control Algorithm from the 3D Scanning Machine and Processing in the SLS Machine
The Effects of High Pressure Gas Burner Parameters on Thermal Efficiency for 2014 International Conference on Machining, Materials and Mechanical Technology (IC3MT)
The Point-Array Coupling Algorithm in 3D Scanning Machine by Laser Ray
Thermal Conduction Measurement and Analysis for a Spaceborn Sensor
Thermal-Structural Analysis for the Optimization of a Low Beam Projector Headlight Design
Chapter 5: Measurements and Monitoring
Micro-Hole Diameter Inspection Using Audible Sound
On the Development of Virtual Inner Loops for Feature Recognition
Accuracy of Three-Dimensional Shape Measurement Using a Triangulation Method Sensor with Optical Skid
Comprehensive Calibration of Structured Light Measurement System Using Planar Chessboard
Designing and Implementing the Remote-Environmental-Parameters-Monitoring-by-Internet KIT
On the Development of Blend Faces and Holes Recognition Algorithm for CAE Applications