Innovation in Testing and Evaluation of Structural Integrity

Preface, Committees, Sponsors
Chapter 1: Analysis and Testing of Mechanical Properties of Materials as Element of Assessment of the Structural Integrity
Study on the Prediction of the Maximum Crack Extension Location for Surface Cracks
Weight Functions and Stress Intensity Factors for Eccentric through Cracks in a 3-D Rectangular Plate Subjected to In-Plane Loading
Mode-II Fatigue Crack Growth Model from Shear-Type Low Cycle Fatigue Properties
Establishment of Unified Correlation of In-Plane and Out-of-Plane Constraints with Ductile Fracture Toughness of Steel
Effect of Maximum Temperature on the Thermal Fatigue Behavior of Superalloy GH536
Modification Strain-Based Failure Assessment Diagram for High Strength Pipeline Steel
A Prediction Model for Mode-III Fatigue Crack Growth
Effect of Various Side Grooves on 3D Crack-Front J-Integral for CT Specimens
Interaction between Local Plastic Strain and Multi-Scale Fatigue Crack Propagation Behavior in Titanium Alloy TC4
Mean Stress and Ratcheting Corrections in Fatigue Life Prediction of Metals
A Modified Cumulative Damage Model for Fatigue Life Prediction under Variable Amplitude Loadings
An Empirical Life Prediction Method of Cold-Stretched Austenitic Stainless Steel
Mechanical Behavior and Fatigue Performance of Carburized Steel Specimens
Multiaxial Fatigue of 6061-T6 Aluminum Alloy under Corrosive Environment
The Effects of Nonproportional Loading on the Elastic-Plastic Crack-Tip Fields
Ductile Crack Growth Modeling under Low Cycle Fatigue Loading Condition
The Combination of Probabilistic Method and Fracture Mechanics Model in Multiple Cracks Analysis
A Thermo-Mechanical Constitutive Model of Glassy Shape Memory Polymers
Study on 3D Edge Crack Extension Simulation in Cold Rolling with the Cohesive Zone Model
Experimental Studies on Deformation Behaviors of Rubbery Materials under Cyclic Loading
Ratcheting Simulation of Z2CN18.10 Austenitic Stainless Steel under Pre-Strain Conditions
A Novel Unified Dislocation-Density Based Model for Hot Deformation Behavior of a Nickel-Based Superalloy
Research on High Temperature Compression and Creep Properties of Porous Copper Alloy
Unified Constitutive Modeling towards Enhanced Structural Integrity
Cohesive Zone Modeling for 3D Ductile Crack Propagation
A Comparative Study on the Cyclic Behavior of Austenite/Ferrite Phases Characterized by the Nanoindentation
Three Dimensional Criterion for Creep Crack Propagation in C(T) Specimen
Long Time High Temperature Stress Rupture Strength Behavior and Structure Stability Study on Ni-Base Superalloy Nimonic 80A
Microstructural Evolution of Nuclear Power Steel A508-III in the Creep Process at 800 degreesC
Analysis on the Creep Mechanism of 12Cr-Mo-W-0.25V Steel Based on Long-Term Stress Relaxation Test Data
Investigation on Creep Behavior of Grade 91 Heat-Resistant Steel at 923K
Effects of Sensitization and Hydrogen on Stress Corrosion Cracking of 18-8 Type Stainless Steel
Stability of Residual Stresses in Ultrasonic Surface Deep Rolling Treated Ti-6Al-4V Alloy under Cyclic Loading
Influence of Plastic Pre-Strain on Low-Temperature Gas Carburization of 316L Austenitic Stainless Steel
Chapter 2: Analysis and Tests of the Structural Integrity of Machine Parts, Machines and Structures
Multiaxial Ratcheting Behavior of M5 Zirconium Alloys Tubes in Different Loading History
Creep Characteristic of Sn1.0Ag0.7Cu Lead-Free Solders with Element Addition
Study on the Non-Probabilistic Interval Damage of High Temperature Furnace Tube
Numerical Simulation and Experimental Investigation of Residual Stress in 06Cr19Ni10 Austenitic Stainless Steel Weld Joint with Effects of Strain-Strengthening
The Mitigation of Weld Residual Stress on 304L Stainless Steel by Post Weld Cool Treatment Process
Experimental Investigation on the Effect of Arm Length on Accuracy of Torque Wrench
The Numerical Analysis and Experimental Study of the Stress Intensity Factor and Outer Surface Strain of the Pressure Pipe with Internal Longitudinal-Cracks
Numerical Investigation on Plastic Strain Correction Factor in Simplified Elastic-Plastic Fatigue Analysis
Numerical Investigation on Creep Crack Growth of Brazed Joint Using Different Damage Models
Numerical Analysis of Wheel Cornering Test Incorporating the Stamping Effects
Fatigue Strength Check of Pressure Swing Adsorber Based on FEM
Uniaxial Ratcheting and Low-Cycle Fatigue Failure of U75V Rail Steel
Fracture Toughness of Different Locations in API X80 Pipeline Steel on Low Constraint SENT Specimens
Thermal-Mechanical Fatigue Behavior of P92 T-Piece Pipe
Changes of the Fracture Toughness of ZG40Cr25Ni20 Furnace Tube after Service and the Corresponding Change of the Microstructure of the Fracture Surface
Efficient Analysis of 3D Mixed-Mode Cracks of a Pressure Vessel Based on Schwartz-Neuman Alternating Method
Peak Load Response of a Concrete Beam in Mixed-Mode Fracture
Limit Load of Pressurized Cylinder-Nozzle Intersection Using Finite Element Method
Mismatch Effect on the Mixed Mode Type Creep Crack within Weldment
Mismatch Constraint Effect for Bimaterial Interfacial Creep Crack
Quantification of Stress Field for Mixed Mode Creep Crack Considering Mismatch Effect
Stress Analysis for Clad Steel Tube Sheet with Oval Tube Hole
Buckling Behaviour of Stainless Steel Square Hollow Sections
Weld Residual Stress in Tube to Tube Sheet Joints of a Heat Exchanger by Experimental and Finite Element Simulation
The Study on Degradation of Stainless Steel Clad Plate Used for a Shift Reactor in Coal Chemical Plant
Numerical Investigation of Stainless Steel Welded I-Sections Subjected to Lateral-Torsional Buckling
Ratcheting Behavior of Pressurized Elbow Pipe under Different Loading Modes
Effect of Gasket Compression Resilience on the Tightness of Bolted Flange System
The Analysis of Bolted Flange Joints under Internal Pressure at High Temperature
Discussion on the Implementation of the Primary Structure Method in Design by Analysis
Structural Integrity Analysis of Nuclear Power Plant Pressure Vessel Penetration Nozzle Repaired
Research on Full-Scale Hydrostatic Burst Testing of Different Pipeline Girth Weld Defects
Structural Analysis and Optimization of Transition Section of Convex Tube Sheet
Stress Corrosion Cracking of NiCrMoV Steel Welded Joint under Applied Load in Simulated Environment of Low Pressure Nuclear Steam Turbine
Creep Fatigue Life Assessment of a Pipe Intersection with Dissimilar Material Joint by Linear Matching Method
Strain Analysis of Oil and Gas Pipeline with Dents Based on ILI Data
Stress Analysis for the Orthotropic Pressurized Structure of Cylindrical Shell with Nozzle
The Significance of Thermo-Mechanical Fabrication on Long Term Creep Life of Type 316H Austenitic Stainless Steel Components
Characterization of High-Power COB LED Module Attached by Low-Temperature Sintered Nanosilver
Manufacturing Issues and the Resulting Complexity in Modeling of Additively Manufactured Metallic Microlattices
Effect of Temperature and Environmental Aging on the Mechanical Reliability of n- and p-Type Thermoelectric Couples
Semi-Open Thermal Protection Scheme of Electronics in Nuclear Rescue Robot
Numerical Study on the Influence of Cathode Flow Channel Baffles on PEM Fuel Cell Performance
Chapter 3: Coatings and Surface Engineering as Elements of the Structural Integrity
Plasma Sprayed Al2O3-SiCw Coatings Deposited under the Electrostatic Field
The Influence of Processing Parameters on the Surface Integrity of Ni60A Coatings Fabricated by Laser-High Frequency Induction Hybrid Cladding
Failure Analysis of the outside Coating on the Furnace Roller
Measurement of Young's Modulus of Thermal Barrier Coatings by Suspended Coupled Flexural Resonance Method
A Comparative Study on the Wear and Corrosion Resistance of Coatings
Chapter 4: Methods and Practice of Inspection, Monitoring and Assessment of Structural Integrity in Industry
HAZOP-LOPA-Based Corrosion Risk Identification and Control
Structural Integrity for the RPV of French NPP during the LRA
Maximum Likelihood Estimation Modeling of Welded Joints Based on Metal Magnetic Memory Parameters
Performance Monitoring Analysis of Liquid Ring Vacuum Pumps
Failure Analysis of the Gray Cast Iron Drain Valve of the Converter Gas Pipe
Effect of Surface Strengthening on Corrosion Property of Ti-6Al-4V in 3.5% NaCl
Reliability Assessment of Gas Pipelines with Corrosion Defects Based on In-Line Inspection
Progressive Failure Analysis of Pipeline Repaired by Composite Wrapping
Corrosion Diagnosis and Mechanism of Boiler Water-Cooled Wall Tubes in Alkaline Environment
Strain Monitoring via Self-Assembled Quantum Dots
Failure Assessment of the First Stage High Pressure Turbine Blades
Comparative Study on the Application of Two RBI Methods on Pipelines
QDs-Epoxy Resin for Strain Monitoring
Finite Element Analysis and Research on Corrosion Defect of Tank Floor
Simulation of Alloy Content Assessment in Fe-Si Alloy Steel by Eddy Current Testing
Fitness for Purpose Assessment of Girth Weld Defect Based on In-Line Inspection
Failure Analysis of Injection Pipe in Diesel-Hydrogenated Unit
Development of Bending and Torsion Fatigue Testing Machine for Multiaxial Non-Proportional Loading