PRICM 6

<ul><li>Improvements & Innovations in the Continuous Casting Process at POSCO</li><li>TiNi-Base and Ti-Base Shape Memory Alloys</li><li>The Recrystallization Behaviour of Nb Microalloyed Steels</li><li>Phase Transformation Rule, Microstructure and Properties of JG590 High Strength Steel</li><li>Effect of Initial Grain Size on the Dynamic Recrystallization Behaviours of Austenite</li><li>Microstructure and Mechanical Properties of Ni-Free High Nitrogen Austenite Stainless Steels Fabricated by Mechanical Alloying Method</li><li>Enhancement of Fatigue Strength of SAE 1045 Steel by Tempering Treatment and Shot Peening</li><li>Effect of Lower Final Rolling Temperature on Mechanical Properties of V-N Microalloyed Mild Steel</li><li>Effect of Reheating and End Cooling Temperature on Microstructure Refinement in a Low Carbon High Strength Nb-Ti Microalloyed Dual Phase Steel</li><li>The Comparative Effectiveness of Nb Solute and NbC Precipitates at Impeding Grain Boundary Motion in Nb-Steels</li><li>Microstructural Features of a Ultra Low Carbon High Strength Acicular Ferrite Steel Thick Plate</li><li>The Study of Inner Surface Crack Formation of Seamless Modified 9Cr-1Mo Tube Rolled on Mandrel Mill and Its Application</li><li>The Nanohardness of Acicular Ferrite and Bainitic Ferrite in Low Carbon Microalloying Steel</li><li>Crystallography of BCC Precipitates at Grain Boundary Corners in FCC Matrix</li><li>Slab Method Analysis and FEM Simulation on Rotating Compression Forming of Cylinder Considering Coulomb Friction</li><li>Effects of Ti and Nb Stabilization on the Recrystallization and the Pitting Potential in Fe-21%Cr Ferritic Stainless Steels</li><li>Effect of Intermittent Heating on Creep Behaviour of Advanced 9-12%Cr Power Plant Steels</li><li>Optimization of Residual Manganese in Molten Metal in Basic Oxygen Furnace (BOF)</li><li>Superplastic Deformation Behavior of Spray Formed High Speed Tool Steel at 820 degreesC</li><li>Effects of Addition of V and Nb on ? in High Cr Ferritic Steels</li><li>Microstructural Characterization of Oxide Scale Formed by Early Stage of Oxidation of 17%Cr-Mn-Ni Austenitic Stainless Steel</li><li>Study on Susceptibility of Hydrogen Embrittlement in a Tool Steel</li><li>High Speed Deformation of Ultrafine Grained TWIP Steel</li><li>Precipitation Hardening in Fe-1.03%Cu Structural Steel</li><li>Mechanics of Asymmetric Rolling of Thin Strip with Effect of Work Roll Edge Contact</li><li>The Role of Deformation Twinning on Creep of Titanium Alloys</li><li>Industrial Application in 2014 T6 Aluminum Alloys Having High Corrosion and Weather Resistant by Anionic Resin Coating with Mirror Luster</li><li>Formation of a Recrystallized and Recovered Multilayered Microstructure in a Hybrid Aluminium Alloy</li><li>Effects of Sb and RE on the Solutionized Microstructure and Microhardness of Mg-6A1-1Zn-0.7Si Magnesium Alloy</li><li>Improvements in Strength and Electrical Conductivity in 7B04 Aluminum Alloy Pre-Stretched Thick Plates Via Low-Temperature Retrogression and Re-Ageing Heat Treatments</li><li>Influence of Structure and Ionic Radius on Solubility Limit in the Mg-Re Systems</li><li>Study on the In Situ SEM Tension Observation of E-A356 Alloys</li><li>Characterization of Intermetallic Phases and Planar Defects in Mg-Y-Zn Alloys</li><li>A Constitutive Equation Coupling the Grain Size during the High Temperature Deformation of Ti-6.62Al-5.14Sn-1.82Zr Alloy</li><li>The Influence of Process Parameters during Machining of Ti6Al4V Alloy</li><li>Long Term Creep Properties of a Die-Cast Mg-Al-Ca Alloy</li><li>Fundamental Research on Fatigue Properties of Closed-Packed Hexagonal Lattice Metal under Biaxial Stress</li><li>Precipitation Hardening Behavior of Al-4wt.%Cu Alloys Aged at Low Temperature under High Magnetic Field</li><li>Microstructural Refinement and Mechanical Property Improvements of Ti-5Al-1Sn-1V-1Zr-0.76Mo Alloy by Equal Channel Angular Extrusion Processing</li><li>Mechanical Properties and Press Formability of Mg Alloy Processed by Cross-Roll Rolling</li><li>In Situ Investigation of Orientation Changes during Heating of Extruded AZ31</li><li>Influence of Extrusion Temperature on Microstructure, Texture and Fatigue Performance of AZ80 and ZK60 Magnesium Alloys</li><li>Development of New Types of Magnesium Alloys Containing Sr or RE Elements</li><li>Structure and Mechanical Properties of Mg-Zn-RE System Alloys</li><li>Hydrogen Evolution Behavior in an Al-Mg-Si Alloy Affected by Hydrogen Embrittlement</li><li>Tensile Properties and Deformation-Fracture Behavior of Ti-6Al-4V Alloy at Cryogenic Temperature</li><li>Study on Al Alloy Surfaces Treated by Ion Beams</li><li>Determination of Sr Content in Mg-Sr Alloys Using Faas</li><li>High Temperature Tensile Properties of a Mg-8%Li Alloy Shear-Strained by Torsion Working and ECAP</li><li>Recycling of Mg-Al-Ca Based Alloy by Vacuum Distillation</li><li>Laser Rapid Forming of Ti-Ni Functionally Graded Alloy</li><li>Microalloying Effects of Ca, Ag, Ni and Zn on Mechanical Properties in an Mg-3mass%Y Alloy</li><li>Improvement of Strength and Ductility by Controlling PFZ with Microalloying Elements in Al-Zn-Mg Alloys</li><li>The Effect of Ag-Addition on Precipitation Sequence in Al-1.0mass%Mg₂Si-Excess 0.4mass%Si Alloy</li><li>HRTEM Observation of Rod-Shape Precipitates in Al-Mg-Si-Ag Alloy Aged at 523 K</li><li>Research on Solution and Aging Treatment of Mg-7Zn-3Al Alloy</li><li>Effect of Processing Route on Microstructure and Texture Development in ECAP of Al-Ti Alloy</li><li>Effects of Homogenization Treatment on Mechanical Properties of Hot-Rolled AZ31 Magnesium Alloy</li><li>Fatigue in Ti-6Al-4V at Very High Cycles</li><li>3D Image-Based Modeling of Ductile Fracture in an Aluminum Alloy Using Synchrotron X-Ray CT Images</li><li>Fatigue Fracture Behavior of Mg-Zn-Y Alloys</li><li>Developments of Magnesium Alloys by Melt Stirring Method</li><li>HREM and HAADF Studies of Precipitates in the Mg-Y-Nd Alloy System</li><li>Microstructural Characterization and Temperature Analysis in Friction Stir Welding of A383/5052 Dissimilar Aluminum Alloys</li><li>First-Principles Calculation of Interaction Energies between Solutes and/or Vacancies for Predicting Atomistic Behaviors of Microalloying Elements in Aluminum Alloys</li><li>Influences of Rolling Conditions on Texture and Mechanical Properties of AZ31 Magnesium Alloy Processed by Differential Speed Rolling</li><li>Effect of Granule Size in Semi-Solid Slurry on Rheo-Extrusion of A7075 Aluminum Alloy</li><li>Influences of Hydrogenation on Microstructure and Microhardness of Ti6Al4V Alloy</li><li>Phase Analysis for Mg-Zn-Y Magnesium Alloys by Using Extraction Technology</li><li>HRTEM Observation of Precipitates at Early Stage of Aging in Mg-Gd-Zr Alloy</li><li>HRTEM Observation of the Age Hardening Precipitates in Mg-Gd-Sc Alloy</li><li>Changes in the Mechanical Properties and Microstructure of AZ91 Cast Mg Alloy Caused by Heat Treatment</li><li>Microstructure Sensitive Design and Quantitative Prediction of Effective Conductivity in Fuel Cell Design</li><li>Effects of Various Thermal and Environmental Exposure on the Mechanical Properties of Aluminum Alloys</li><li>Effect of Initial Microstructure under Different Solidification Conditions on Hot Working Behavior of AZ31 Alloy</li><li>Effect of TiH₂ on the Microstructures and Refining Performance of Al-Ti-C Master Alloy</li><li>Solute Content and the Tensile Behavior of High Pressure Die Cast Mg-Al Alloys</li><li>Electromagnetic Stirring Processing and its Influence on Mechanical Properties of ZL102(or Al-Si) Alloy</li><li>Investigation of Streaking Defects on Aluminium Extrusions</li><li>Integrating Process, Material and Business Strategies to Transform a Small-Medium Aluminium Products Manufacturer</li><li>On-Line Aging to Improve the Tensile Strength and Conductivity of Cold-Drawing AA6201 Wires</li><li>From Angel Food Cake to Porous Titanium - A Novel Powder Metallurgical Approach for Metallic Foam Utilizing Food Processing and Ceramic Processing Techniques</li><li>Resistance of Thin Al Foam Panels to Deep Indentation</li><li>Preparation of the Al-Cu-Co and Al-Cu-Ni Ternary Intermetallic Powders via a Solid-Liquid Reaction Ball Milling Technique</li><li>Preparation of Ti-Al Intermetallics by Aluminum Melt Infiltration-Diffusion Annealing Technique</li><li>Oxidation Behavior and Pack Siliconized Oxidation-Resistant Coatings of an Nb-Based Ultrahigh Temperature Alloy</li><li>Microstructure and Mechanical Properties of Dual Multi-Phase Intermetallic Alloys Composed of Geometrically Close Packed Ni₃X Structures</li><li>Development of a Second Generation TiAl Turbocharger</li><li>Microstructure and Deformation Behavior of Lamellar Ti-Rich TiAl Crystal with Lotus-Type Aligned Pores</li><li>Microstructures Evolution of a Ni-Base Superalloy after Long-Term Aging at 750 degreesC</li><li>Effect of Third Elements on Pseudoelastic Behavior in Fe₃Al Single Crystals</li><li>Strengthening and Ductilization of D0₃-Type Fe₃Al Intermetallic Alloys by Dispersion of Laves Phases Fe₂Zr and Fe₂Nb</li><li>Mechanical Properties of Zr-Added Fe-Al Intermetallic Alloys Containing Large Second Phase Particles</li><li>Influence of Electrical Parameter on the Size of Superalloy Powders Prepared by Spark Plasma Discharge Process</li><li>Microstructure and Plastic Deformation Behavior of Ni₃V Single Crystals</li><li>The Effects of Nb and Cr Addition on Mechanical and Chemical Properties of Cold-Rolled Ni₃(Si,Ti) Intermetallic Foils</li><li>Microstructure and Mechanical Properties of In718 Alloy Produced with Twin-Scanning Atomizer</li><li>Dependence of Strain Rate and Environment on the Mechanical Properties of the Ni-19Si-3Nb-1Cr-0.2B Intermetallic Alloy at High Temperature</li><li>Effect of Isothermal Forging on Microstructures and Mechanical Properties of Nb-Si In Situ Composite</li><li>High Temperature Oxidation Behavior of MoSi₂ under Low Pressure Atmosphere</li><li>Reliable Titanium Aluminide Texture Measurement Using EBSD</li><li>Phase Equilibria between ?-Fe (A1) and Fe₂Ti Laves (C14) Phases and Microstructure in Fe-Ti-Ni Ternary System at Elevated Temperatures</li><li>Mechanical and Physical Properties of Ni₃Al-Based Alloys with Cr Carbides Dispersion</li><li>Defect Generation in Some Transition-Metal Silicides in Accommodating the Deviation from the Stoichiometric Compositions</li><li>A 21st. Century Perspective on Molybdenum Powder Production by Hydrogen Reduction</li><li>Oxidation Behaviours of MoSi₂ Single Crystal at the Temperatures of 773K and 1473K</li><li>Plastic Deformations in L1₀-Ordered Single Crystals with their c/a Ratios Less than Unity</li><li>Thermoelectric Properties of Ru₂Si₃-Based Chimney-Ladder Phases</li><li>Hydrogen Permeation Properties of Nb-Based Two-Phase Compounds</li><li>Modification of Ni-Cr-Co-Mo-Nb-Ti-Al Superalloy for USC Power Plant Application at Temperature above 750 degreesC</li><li>Phase Equilibria and Atomic Diffusion in the Ir/CoAl System</li><li>Microstructures and Mechanical Properties of Ti-48Al-2Cr-2Nb-xW</li><li>Improvement of Strength, Weibull Modulus and Damage Tolerance of SiC</li><li>Hydrothermal Synthesis of Bi_1.5ZnNb_1.5O₇ Nanopowders</li><li>Study of the Preparation Technology and Properties of BaBi₄Ti₄O₁₅ Ceramics</li><li>Edge Effects in Sliding Wear Behavior of ZrO₂-WC Composites and WC-Co Cemented Carbides</li><li>Study of Water-Debinding for Ceramic Parts by Injection Molding</li><li>Millimeter-Wave Assisted Sintering of Polycrystalline Yttria for Laser Host Material</li><li>Barium Titanate Nanopowders Prepared from the Modified Oxalate Co-Precipitation Method</li><li>Fabrication of Bi_2-xSb_xTe₃ (x=0-1.5) Thick Film by Centrifugal Deposition</li><li>Synthesis of Ultra-Fine and High-Pure Zirconium Diboride Powders Using Solution-Based Processing</li><li>Simultaneous Synthesis and Consolidation of W-Added ZrB₂ by Pulsed Electric Current Pressure Sintering and their Mechanical Properties</li><li>Silicon Nitride/Boron Nitride Composite by Combustion Synthesis</li><li>Grain Growth Behavior of Al₂O₃-ZrO₂ with a Small Amount of Zirconia</li><li>Design of Mold Materials for Encapsulating Semiconductors Using Epoxy Molding Compounds</li><li>Fabrication Processes and Properties of Highly Pure MgAlON Materials</li><li>Development of Efficient Metal Catalyst Support</li><li>Microstructure and Electrical Properties of Calcium Copper Titanate Ceramics</li><li>Negative Thermal Expansion in Mn₃Ga(Ge,Si)N Anti-Perovskite Materials</li><li>Wear Characteristics of Bulk Ti₃AlC₂ under Current-Carrying Conditions</li><li>Depth Selective Electronic State Analysis of Implanted Nitrogen in Visible-Light Response TiO₂ Photocatalyst</li><li>Novel Aluminium Nitride Surface Coatings Formed on Aluminium</li><li>Densification and ?/? Phase Transformation of SHS Si₃N₄ Containing Al₂O₃ and Y₂O₃ during Sintering</li><li>Zinc Oxide Ceramics with High Mobility as n-Type Thermoelectric Materials</li><li>Preparation and Characterization of ?-SiAlON Ceramics from High Aluminium Fly Ash via Carbothermal Reduction-Nitridation</li><li>XRD and HRTEM Study of Zirconia Nanoparticles Synthesized by Laser Ablation</li><li>Effect of Oxygen Partial Pressure on Electrical Conductivity of Ca-Ru-O Compounds Prepared by Spark Plasma Sintering</li><li>Spark Plasma Sintering of ?SiAlON-cBN Composite</li><li>Fabrication of Alumina and Silicon Carbide Fibers from Carbon Fibers</li><li>Fabrication and Electrical Property of SiC-AlN Composites</li><li>Effect of Calcination on Mechanical Properties of Hydroxyapatite / Zirconia Composite Sintered by Spark Plasma Sintering</li><li>Dielectric Properties and Microstructure of Nearly Zero Temperature Coefficient ?_f of Forsterite Ceramics</li><li>Sintering and Performance of MgO-CaO Materials with Nano-Sized ZrO₂ Addition</li><li>High Volume Fraction Carbide Reinforced Copper Matrix Composites for Sliding Contact Applications</li><li>Preparation of Silica Microcapsules Containing Phase Change Paraffin Wax</li><li>Online Wear Monitoring of Polymer Matrix Composites</li><li>Frictional Behavior of Glass Fiber Reinforced Polyester under Different Loads</li><li>A Pressured Steam Jet Approach to Tool Wear Minimization in Cutting of Metal Matrix Composites</li><li>Mechanical Properties Variation with Test Temperature for Liquid Phase Sintered 95W-3.5Ni-1.5Fe Alloys</li><li>Influence of Secondary Electro-Conductive Phases on Sliding Wear Performance of Zirconia Based Ceramic Composites</li><li>Metal Coated Functionalized Single-Walled Carbon Nanotubes for Composites Application</li><li>Effects of SiO₂ Particles on Wear Behavior of Cu-SiO₂ Dispersion-Hardened Alloys</li><li>Fabrication of Polystyrene Fibers Containing Nanoparticles of TiO₂ and ZnO by Electrospinning</li><li>Surface Nano-Deformation Behavior in Particle-Reinforced Al Composite</li><li>Basalt Reinforced Plastics: Some Operating Properties</li><li>Effect of Boron on the WC Morphology in Sub Micron Tungsten Carbide-Aluminide Composites</li><li>Damping Capacities of B/Al Composite Subjected to Thermal-Mechanical Cycling</li><li>Synthesis of 1, 2-Aceanthrylenedione Catalyzed by Anhydrous AlCl₃</li><li>Oxidation Behavior of Ti3SiC2-SiC Ceramic Composites</li><li>Effects of the Morphology of Silicon Phase on the Properties of Zinc Based Composites</li><li>Damping Characteristics of a NiMnGa/Polymer Composite Material</li><li>Chemical In Situ Synthesis of Aluminum Alloy Composites</li><li>A Study on Manufacture of SiCp/Fe Composites by Specimen Current Heating Hot Press Sintering</li><li>Synthesis and Mechanical Properties of Advanced Polyimide/Silicon Dioxide Nanocomposites</li><li>Structure of Natural Nano-Laminar Composites: TEM Observation of Nacre</li><li>Measurement of Strain and Stress Distribution of Composite Materials by Electron Moire Method</li><li>Rapidly Solidified Thick Deposit of Fe-B-Cr Alloy by Plasma Spraying</li><li>A Relation between Laboratory and Full-Scale Testing of Polyester/Polyester Composites under Static and Dynamic Load</li><li>Electrical Conductivity of VGCF/ Aluminum Composites Fabricated by Electro Spark Sintering</li><li>Mechanical Properties of Nano-Laminar Glass/Metal Composite</li><li>Study on Toughening Mechanism of Nano-Composite Ceramics Prepared by Mixed Coagulative Method</li><li>Fabrication of Structural Composite Accompanied with a Function of Thermoelectric Conversion</li><li>Microstructure and Properties of Porous CMCs Prepared by HIPing the Pyrolyzed ZrO₂/ Si / Phenol Resin Composite</li><li>Study on In Situ Synthesized Titanium Matrix Composites</li><li>An Amendment Method for Stress and Strain of Double-Curved Laminated Composite</li><li>Tensile Behaviour of Nano-Particulate Reinforced Aluminium Matrix Composites at Elevated Temperatures</li><li>Effect of Aluminum Addition on Thermal Properties of Mg/SiC_P Composites</li><li>Microstructure Control of Ceramic-Intermetallic Composites by Heat-Treatment before Combustion Synthesis</li><li>Enhanced Wear Resistance of CFRP Laminates via Carbon Nano-Particles Dispersed Surfaces</li><li>Flexural/Twist Anisotropy Influence on Elastic Instability of a Plate Composite Laminate</li><li>Bacteria-Templated Synthesis of ZnO Hollow Spheres via a Facile Hydrothermal Method</li><li>In Situ Synthesis of Hierarchical Nanocomposites Utilizing Redox-Active Biofibers by a Novel Biogenic Technique</li><li>The Effect of Matrix on the Mechanical Properties of Squeeze Cast Al - 50 % SiC_p Composites</li><li>Dynamic Mechanical Thermal Properties of a New Metal/Polymer Composite for Fused Deposition Modelling Process</li><li>Strength Prediction for Jute Polyester Composite for Transverse Fiber Reinforcement</li><li>Numerical Analysis of Force and Power Parameters in Cold Ring Rolling</li><li>Microstructure and Mechanical Properties of the Spray-Deposited Al-10.8Zn-2.8Mg-1.9Cu Alloy at Various Aging Conditions</li><li>Subgrain Boundaries in ECAP Aluminium</li><li>Freeform Fabrication of Non-Metallic Objects by Selective Laser Sintering and Infiltration</li><li>Manufacturing Technologies for Small Lot Size, Short Cycle Time and Low Cost</li><li>Advanced Plastic Processing Techniques for the Densification of Spray Deposited Preforms</li><li>Effects of Friction on Precision Forging Process of Blade with a Damper Platform</li><li>Texture Aspects of Deformation Processes under Equal-Channel Angular Pressing of Metals</li><li>Development of Substructure Non-Uniformity under Equal-Channel Angular Pressing</li><li>Butt Joining of Dissimilar Sheets by Shot Peening</li><li>Formation of Ultrafine Grained Structure in SUS 304 Stainless Steel Produced by High Pressure Torsion (HPT)</li><li>Lining of Carbon Steel with Metal Foils by Shot Peening</li><li>Preparation of Homogeneous Fe-Al Intermetallic Compound Sheet by Multi-Layered Rolling and Subsequent Heat Treatment</li><li>A New Method to Produce Superfine and Nano-Sized Fe Powders: Spark Plasma Discharge Process</li><li>Preparing Semisolid Light Alloys by Vibrating Wavelike Sloping Plate Process and Thixoforming</li><li>Optimization of Particle Size and Distribution by Hydrostatic Extrusion</li><li>Synthesis of 3, 3-Biacenaphthene through Coupling Reaction of Acenaphthene Catalyzed by [Bmim]Cl/FeCl₃ Ionic Liquid</li><li>Microstructures and Phase Transformations of Ti-50.9at%Ni Alloy Processed by Equal Channel Angular Extrusion at Medium Temperature</li><li>Effect of Shear Deformation on Deformed Microstructures of Austenitic Grains</li><li>Research on the Blank Selection in the Power Spinning Process of Parts with Transverse Inner Rib</li><li>The Study on the Microstructure Characters of Pure Iron during Cold Rolling by High Energy X-Ray Diffraction</li><li>Distortion Analysis of Aluminum Alloy for Sheet Metal Forming after Solution Treatment</li><li>Influence of Microshot Peening on Surface Layer Characteristics of Cold Tool Steel</li><li>Mapping of the Granular Flow during the Irreversible Deformation Processes in Spatially Extended Polycrystalline Systems</li><li>Fine-Grained Structure in Extruded Magnesium Alloy with Long-Period Stacking Order Phase</li><li>Microstructure and Mechanical Properties of Titanium Severely Strained by Means of Friction Roll Processing</li><li>Fabrication of Nanostructured Materials by Hydrostatic Extrusion: Advantages and Limitations</li><li>X-Ray Study on Mg-Sm Alloy Produced by HPT</li><li>Study on Warm Flow Compacted Tungsten-Based Alloy Powder for Cross-Shape Part</li><li>Semisolid Forging of Cast Iron Using Rapid Resistance Heating</li><li>Analysis of Deformation Textures and Microstructure in ECAE Processed Copper Single Crystals via Route C</li><li>Surface Features in Honing Zirconia Ceramics Using Fine Grains with Ultrasonic Assistance</li><li>Ultrasonic Spectroscopy and X-Ray Diffraction Study for ARB Aluminum</li><li>An Investigation on the Microstructure and Mechanical Properties of Mg-3Al-1Zn Alloy via Spray Forming</li><li>Research on Properties of SiCp/AZ61 Magnesium Matrix Composites in Fabrication Processes</li><li>Measurement of Cutting Temperature Using Wireless Sensing System</li><li>Application of PEG/PMMA Binder for Powder Injection Moulding of Hardmetals</li><li>Microstructure and Properties of Al-Zn-Mg-Cu-Mn In Situ High Strength Alloy</li><li>Mechanical Properties of Equal Channel Angular Extruded Magnesium Boride (MgB₂) Powder in Tubes (PITs)</li><li>Relationship between Saturation Curve and Peening Parameters for Aerospace Shot Peening Process</li><li>Synthesis of Tin Oxide (SnO₂) by Precipitation</li><li>Synthesis of Tin Oxide (SnO₂) by the Oxalate Route: Effects of Addition Method and Ageing</li><li>Atomistic Studies of Deformation Mechanism of Nanocrystalline Al-Ti and Al-Fe Alloys from First-Principles</li><li>Coating with Supersonic Free-Jet PVD</li><li>Experimental Study of Grain Growth in Aluminium Melts under the Influence of Ultrasonic Melt Treatment</li><li>Unsteady-State Solidification under Forced Flow Conditions</li><li>Effect of Structure on Hot Tearing Properties of Aluminum Alloys</li><li>Microstructure and Mechanical Property of Al₂O₃/Y₃Al₅O₁₂ (YAG) Eutectic Ceramic In Situ Composite Prepared by Laser Zone Melting</li><li>A Model for Lamellar-Rod Eutectic Transition</li><li>Influence of Processing Parameters on Interfacial Heat Transfer Coefficient at the Metal-Die Interface of Die Cast AM50 Alloy</li><li>Fracture Analysis of Superplastic Diffusion Bonding Joints between Titanium Alloy and Stainless Steel</li><li>3D Microstructure Development during Unconstrained Solidification of Aluminum Alloys</li><li>Study on Process of Magnesium Alloy Investment Casting</li><li>Control of Carbides and Graphite in Ni-Hard Type Cast Iron for Hot Strip Mills</li><li>Welding of Fine Metal Particles by Using a Tungsten Needle and Measurement of the Strength of the Joints</li><li>Intensifying Smelting Synthesis Technique of 2500m³ Blast Furnace</li><li>A Study of hBN-Y₂O₃ Composite Investment for Casting Ti-6Al-4V Alloy</li><li>The Analysis of the Blowing Process with the Top Lance of the Argon Oxygen Decarburization (AOD) in Baosteel</li><li>Joining of Aluminium Alloy and Mild Steel Sheets Using Mechanical Clinching</li><li>Synthesis of Ultrafine Particles of Iron and Iron Nitride by Evaporation of Iron in Gas Mixtures of Argon and Ammonia or Argon and Nitrogen</li><li>The Effect of Heat Treatment on the Microstructure and Mechanical Properties of Laser Rapid Forming Ni-Based Alloy Rene88DT</li><li>Inhibition of Austenite Grain Growth by Particles and Solute Elements in Fe-0.05% C and Fe-10% Ni Alloys Deoxidized by Mn-Si, Ti, Mg, Zr and Ce</li><li>Microstructure and Mechanical Properties at the Unsteady Areas of Non-Linear Friction Stir Welding</li><li>Process and Practice of EAF with De-P Hot Metal Charging for Melting Stainless Steel</li><li>Rheological Transitions at Low Solid Fraction in Solidifying Magnesium Alloy AZ91</li><li>Liquid Metal Free Surface Motion Submerged in an AC Magnetic Field</li><li>Spray Forming of Al-Fe-Cr-Ti and Al-Si-Li Alloys</li><li>Enhanced Red Emission in Lithium Doped CaWO₄:Eu³⁺ and CaMoO₄:Eu³⁺ Phosphor</li><li>Microwave-Assisted Synthesis of Phase Pure YFeO₃ Nanocrystallite</li><li>Photodegradation of Formaldehyde over Doped TiO₂ Prepared by Hydrothermal Method under Visible Light Irradiation</li><li>Enhancement of Magnetocaloric Effects in Single Phase La_1-zNd_z(Fe_0.88S _0.12)₁₃</li><li>Characterization and Microwave Absorption of "Core/Shell"-Type Nanoparticles</li><li>Fabrication of Iron Oxide Nanostructures by Electron Beam-Induced Deposition</li><li>Effect of Mn Substitution on the Structure and Microwave Properties of Nd-Fe-B Nanocomposites</li><li>Onset Magnetic Field for Rearrangement of Martensite Variants in Ni₂MnGa</li><li>Thermal Behavior of Electron Irradiation Defects in CZ-Si</li><li>Large Linear and Volume Magnetostriction in Fe-Ga Alloys</li><li>Improvement of Magnetic Characteristic in Spheroidal Graphite Cast Iron</li><li>Nano-Order Structural Analysis of White Light-Emitting Silicon Oxide Prepared by Successive Thermal Carbonization/Oxidation of the Porous Silicon</li><li>Microstructure of Anisotropic Nd-Fe-B Film Magnets Prepared by Pulsed Laser Deposition</li><li>An Actuator Laser of Optical Disk Drive High-Frequency Electromagnetic Vibrations Characteristic Analysis</li><li>Structural, Electrical and Magnetic Properties of Ni₃₃Fe₆₇ and Ni₂₁Fe₇₉ Films Deposited on SiO₂/Si(100) at 633 K by DC Magnetron Co-Sputtering</li><li>Deposition of a Well-Adherent Nano-Crystalline Diamond Coating on Titanium Using CH₄-H₂ Gas Mixture</li><li>Nickel Metal Induced Lateral Crystallization of Patterned Amorphous Silicon Thin Film</li><li>Preparation of Chain-Like Carbon Nano-Tubes Film and its Field Emission Properties</li><li>Structural and Mechanical Properties of AlN Films by Pulsed Bias Arc Ion Plating</li><li>Structural Evolution Upon Annealing of Multi-Layer Si/Fe Thin Films Prepared by Magnetron Sputtering</li><li>Performance of Low Resistivity Electrode Prepared by Electroless Plated for Amorphous Silicon Thin-Film Transistors</li><li>A Splats Obtaining System for Thermal Spray Deposits</li><li>Investigation of Aluminum Content on the Properties of Sol-Gel-Derived Zinc Oxide Thin Films</li><li>Pulsed Closed Field Unbalanced Magnetron Sputtering (P-CFUBMS) Deposited TiC/a:C Thin Films</li><li>High-Performance Poly-Ge Thin-Film Transistor with NiGe Schottky Source/Drain</li><li>Investigation of Mechanical and Structural Properties of AlN Thin Films Prepared by Mid-Frequency Pulsed Magnetron Sputtering</li><li>A Study on Formability of a Polyimide Film by Using Visco-Elasticity Measurement and Hot-Embossing Tests</li><li>Growth and its Properties of GaMnN Film Based on ECR-PEMOCVD</li><li>Nanowire Fabrication of Silicon-Based Materials</li><li>Microstructure and Electrical Properties of Nano Ni-Cr Thin-Films Fabricated by Magnetron Co-Sputtering Techniques</li><li>Synthesis of Single-Walled Carbon Nanotube Networks on Silicon Nanowires</li><li>High Rate Growth of Highly-Crystallized Ge Films on Quartz from VHF Inductively-Coupled Plasma of GeH₄ + H₂</li><li>Characterization of Electronic Charged States of Nickel Silicide Nanodots Using AFM/ Kelvin Probe Technique</li><li>Effect of Reducing Thickness of TiN Buffer Layers on Epitaxial Growth of GaN Layes</li><li>Cracking of Aluminum Nitride Film on Stainless Steel Substrate at Elevated Temperature</li><li>Material Characteristics and Electrical Modeling of Ultra Thin Copper Oxides in ULSI Application</li><li>Polymer Thin Films Prepared by RF Magnetron Sputtering of PTFE on NiTi Alloys</li><li>Electrical Properties and Microstructures of Ultraviolet Transparent Ga₂O₃ Thin Films</li><li>Ultra-Large Area RF Plasma Sources Employing Multiple Low-Inductance Internal-Antenna Modules for Flat Panel Display Processing</li><li>Performance of Titanium-Tungsten-Silicon-Aluminum Based Coated Cutting Tools</li><li>XRR and SAXS Study of Hydrogenated Amorphous Silicon Oxycarbide (a-SiOC:H) Films</li><li>Microstructure of 430L Stainless Steel Powders during High-Energy Ball Milling</li><li>Size Controlled ZnO Nanoparticles Prepared by Water-in-Oil Microemulsion</li><li>Ab-Inito Data for Interatomic Interactions in Zr-Rich ZrCu Alloys and Embedded-Atom-Method Potentials</li><li>The Production and Elevated Temperature Properties of Ca₆₅Mg₁₅Zn₂₀ Bulk Metallic Glass</li><li>Ternary Sm-Al-Co Bulk Metallic Glass Formation Designed Using a Cluster Line Approach</li><li>Viscous Flow Behaviors of Supercooled Liquids of Pre-Annealed Zr₅₅Cu₃₀Al₁₀Ni₅ Bulk Metallic Glasses</li><li>Cluster-Based Bulk Metallic Glass Formation in Co (-Fe)-Si-B-Nb Alloy Systems</li><li>Environment-Assisted Cracking of Zr-Based Bulk Metallic Glass</li><li>Density and Enthalpy Relaxation Behavior in a Bulk Pd₄₀Ni₄₀P₂₀ Metallic Glass</li><li>Ultrasonic Attenuation Properties of Glassy Alloys in Views of Complex Viscoelasticity</li><li>Fabrication of Ni_52.5Nb₁₀Zr₁₅Ti₁₅Pt_7.5 Bulk Metallic Glassy Matrix Composite Containing Dispersed ZrO₂ Particulates by Spark Plasma Sintering</li><li>Plastic Deformation of Electrodeposited Nanocrystalline Ni-W Alloys at High Temperatures</li><li>Low Cycle Fatigue of Electrodeposited Pure Nanocrystalline Metals</li><li>Comparison of Mechanical Properties between As-Quenched and Annealed Metallic Glass Pd₄₄Cu₃₁Ni₈P₁₇</li><li>Small-Scale Resistance Spot Welding of Zr Based Glassy Alloys</li><li>Origin of Different Dependence of Apparent Glass-Forming Ability on Casting-Atmosphere-Pressure in Zr-Al-Ni-Cu-Pd Alloy System</li><li>Controlled Elasticity in Nano-Structured Metallic Glass by Ion Implantation Method</li><li>Hydrogen Production by Methanol Steam Reforming Using Amorphous Metal Membranes</li><li>Shear Banding Analyses of Amorphous Alloys with Crystalline Particles</li><li>Quasicrystallization of (Zr₆₅Al_7.5Cu_27.5)₉₅Ti₅ Glassy Alloy</li><li>Effects of Addition of Al, Ti and Ag on Glass-Forming Ability of Cu₅₀Zr₅₀ Alloy</li><li>Solid Solution Formation Criteria for High Entropy Alloys</li><li>Glass Forming Ability and Thermal Properties of a Cu-Based Bulk Metallic Glass Microalloyed with Silicon</li><li>Microstructure and Mechanical Properties in Friction Stir Processed Zr-Al-Ni-Cu Bulk Metallic Glass</li><li>Structure of Zr-Cu and Zr-Ni Liquid Alloys Studied by High-Energy X-Ray Diffraction</li><li>Defect Structures in Al-Ni-Rh Crystalline Approximants Studied by HREM and HAADF Techniques</li><li>Microstructure of Rapidly Solidified Co-Sn-Ti and Co-Sn-Si Alloys</li><li>Fe-Metalloid Metallic Glasses with High Magnetic Flux Density and High Glass-Forming Ability</li><li>Development of the Ni-Based Metallic Glassy Alloys for PEFC Separator</li><li>Ultrasonic Properties of a Ti_47.4Zr_5.3Ni_5.3Cu₄₂ Glassy Alloy during Progressive Devitrification</li><li>Fabrication of the Bulk Amorphous Ni-W Alloy by an Electroforming Process</li><li>Characterization and Modification of Nanocrystalline Iron Oxide Powders Prepared by an Inert Gas Condensation Technique</li><li>The Effects of Size of Catalysts on the Morphology of Carbon Fibers</li><li>Raman Spectroscopic Characterization of Carbon Nanofibers Obtained by Using Metal Chloride as Catalyst Precursor</li><li>Structural Stability and Elasticity in Zr-Based Bulk Metallic Glasses</li><li>Carbon Nanotube Nano Composites for Multifunctional Applications</li><li>Pinpoint Nano-Crystallization and Magnetization in Fe-Nd-B Metallic Glass by Electron Irradiation</li><li>Unique Nano-Crystalline Structure Formation in Zr-Pd Metallic Glass by Electron Irradiation Technique</li><li>SiC Nanowires Synthesized by Microwave Heating</li><li>A Study of Testing the Nanocatalyst Decomposition Efficiency of Methanol (CH₃OH) and Ethanol (C₂H₆O)</li><li>Synthesis of New Ni-Ta-Based Bulk Glassy Alloy with High Fracture Strength of over 3000 MPa</li><li>Synthesis and Consolidation of Nano-Sized NiCo Powder by Powder Technology Rout</li><li>Development of Amorphous and TiAl-Nb₂Al Intermetallic Nanocomposite Powders by Mechanical Alloying</li><li>Phase Constitution and Heat Treatment Behavior of Zr-Nb Alloys</li><li>Preparation and Characterization of Natural Hydroxyapatite: A Comparative Study of Bovine Bone Hydroxyapatite and Hydroxyapatite from Calcite</li><li>Stress-Induced Lattice Transit Behavior in a Cold-Rolled Cu-Al-Mn Two-Way Shape Memory Alloy</li><li>Change in Material and Structural Parameters of Bone Mechanical Function during Long-Bone Regeneration</li><li>pH-Sensitivity of N-Carboxyethyl Chitosan Hydrogel and Drug Controlled Release In Vitro</li><li>Polarisation Behaviour of 316L Stainless Steel in Cell Culture Environment</li><li>Behavior and Preparation of Single Crystal of Cu-Al-Ni-Be SMA</li><li>A New Concept of Biomaterials to Induce Tissue Regeneration</li><li>Mechanical Behaviors of Ti-29Nb-13Ta-4.6Zr-XO for Biomedical Applications Subjected to Cold Working and Various Heat Treatments</li><li>Effects of Cross-Linkage and Hydroxyl Groups on Bonding Strength between Titanium and Segmented Polyurethane through 3-(Trimethoxysilyl) Propyl Methacrylate</li><li>Effect of Rotation Speed on Transformation Behavior in Ti-48at%Ni Shape Memory Alloy Melt-Spun Ribbon</li><li>Experimental Study of Stress Induced Martensite Transformation under Plane State of Stress</li><li>Corrosion Behavior of Zirconium Based Alloys in Simulated Body Fluids</li><li>Effect of Heat Treatment Temperature on the Mechanical Property in Cast TiNi Shape Memory Alloy</li><li>Effect of Iron Addition on Co-29Cr-6Mo Alloys for Biomedical Applications</li><li>Effect of Nitrogen on Microstructure of Porous CoCrMo Alloy Compacts for Biomedical Applications</li><li>Change in Tensile and Fatigue Properties of Biomedical Ti-29Nb-13Ta-4.6Zr Alloy Fabricated by Various Processings</li><li>Hard-Ceramic Layer Formed on Ti-29Nb-13Ta-4.6Zr and Ti-6Al-4V ELI during Gas Nitriding</li><li>Hydroxyapatite Formation on Calcium Phosphate Coated Titanium</li><li>Rolling Texture of ?"-Phase in Ti-22mol%Nb-3mol%Al Biomedical Shape Memory Alloy</li><li>Surface Modification of Titanium with Hydrothermal Treatment</li><li>Decomposition of a Biocompatible Zr-Ta-Nb Alloy</li><li>Nano-HA Coating on Titanium Surface Fabricated by Modulation of Self-Assembled Monolayer and Bovine Serum Albumin</li><li>Orientation Dependent Internal Friction of Textured Ti-Nb-Al Shape Memory Alloy</li><li>Catalytic Combustion Synthesis of Carbon Nanofibers</li><li>Martensitic Transformation of TiAu Shape Memory Alloys</li><li>New Developments in Extruded Magnesium Alloys for Structural Applications</li><li>Silk as Substratum for Cell Attachment and Proliferation</li><li>Enhancing the Bonding Strength of Plasma-Sprayed HA Coating on Pure Ti</li><li>New Mathematical Models for Effective Drug Diffusivity Estimation in 2D</li><li>Effect of Small Amount of Dopant on Phase Stability of Zirconia Bioceramics</li><li>Structure Control of Hydroxyapatite Using a Magnetic Field</li><li>Novel Waste Processing by Means of Mechanochemical Treatment</li><li>Hydrogen Storage Properties of FCC Type Mg-Transition Metal Hydrides Prepared by GPa High Pressure Method</li><li>Comparison between Mg/Cu Super-Laminates and Mg₂Cu Powder in Microstructure and Hydrogen Storage Properties</li><li>Hydrogen Quasi-Chemically Trapped between Defective Graphene Layers in Nanostructured Graphite</li><li>Pt₄ZrO₂/C Cathode Catalyst with Excellent Durability for High Temperature PEMFC Based on H₃PO₄ Doped PBI</li><li>Phase Transition of Mg/Pd Laminate Composites during Hydrogenation/Dehydrogenation</li><li>Ammonia Synthesis Using Atomic Hydrogen Supplied From Silver-Palladium Alloy Membrane</li><li>Structural Characterization of D₂ in Cu₃(1,3,5-Benzenetricarboxylate)₂ Using Neutron Powder Diffraction</li><li>Synergetic Effect of Oxides on Hydrogen Reaction Kinetics of Magnesium Hydride</li><li>Hydrogenation Characteristics of Mg Based Alloy Prepared by Super Lamination Technique</li><li>Degradation Properties of Hydrogen Storage Alloys and Change of Microstructure during the Degradation</li><li>The Alloy Design of Metallic Interconnector of Solid Oxide Electrolyte Fuel Cell (SOFC)</li><li>In Situ High-Resolution Observation for Decomposition of NaAlH₄</li><li>Preparation and Hydrogen Storage Properties of Mg-Ni-B BCC Alloys</li><li>HRTEM Study of Nanostructures in Hydrogen-Absorbing Mg-Ni and Mg-Ni-La Alloys Prepared by Melt-Spinning</li><li>Thermoelectric Power Hydrogen Sensors for Reversible Hydrogen Storage Materials</li><li>Characteristics of Hydrogen Storage by Sn/MgH₂ Nanocomposite Obtained by Mechanical Milling of MgH₂ with Sn</li><li>Self-Propagating High-Temperature Synthesis of Porous Nickel-Titanium</li><li>Modeling of Mechanical Behavior of Porous Sintered Timing Wheel in Contact with Chain Wheels</li><li>Recycled Aluminum Alloy Matrix Composites with Artificial Pellets Made of Incineration Ashes</li><li>Processing of Nanoporous Gold by Dealloying and its Morphological Control</li><li>Influence of Density on the Compressive Properties in Porous Copper Produced by Spacer Method</li><li>Structural Analysis on Anisotropic Deformation Properties of Highly Porous Aluminum Material</li><li>Electro-Deposition for Foamed Zinc Material from Zinc Sulfate Solution</li><li>Fabrication of Low Temperature Foaming Glass Materials Using Hydrothermal Treatment</li><li>Three-Dimensional Zinc Mapping inside Aluminum Foams Using Synchrotron X-Ray Microtomography</li><li>Fatigue Strength of Lotus-Type Porous Magnesium</li><li>Whisker Initiation Behavior from Electrodeposited Sn/Cu Coating on Cu Leadframe</li><li>Processing and Mechanical Properties of Porous Titanium-Niobium Shape Memory Alloy for Biomedical Applications</li><li>Mechanical and Thermal Properties of Micro-Closed Cellular Materials Containing Different Materials from that of Cell Walls</li><li>Unusual Wetting Behavior of Liquid Metals on Porous Layer Formed at Surface of Iron Substrate Prepared by Oxidation-Reduction Process</li><li>Oxidation Behavior of Cu Nanoparticles and Formation of Hollow Cu₂O Spheres</li><li>The Production Practice on Digesting Solid Wastes in Blended Material for Sinter</li><li>Fabrication of Functionally Porous Structures by the Sheet Lamination Method</li><li>Room Temperature Superplastic Deformation of Closed-Cell Zinc Alloy Foams</li><li>Physicochemical Properties of Carbons Prepared from Physic Nut Waste by Phosphoric Acid and Potassium Hydroxide Activations</li><li>Degradation Mechanisms of Pressure Vessel Internal Steel (18Cr-10Ni-Ti) Irradiated with Heavy Ions</li><li>Formation of Al-Based Intermetallic Compound under Ion Implantation at Lower Temperature </li><li>Fabrication of Cermet Nuclear Fuels Designed for the Transmutation of Transuranic Isotopes</li><li>Characterization of High Strength Alloy Formed by Ion Irradiation of Metallic Glasses</li><li>Corrosion Behavior of CLAM in Liquid LiPb Alloy at 480 degreesC</li><li>Co Addition Effect on the Precipitation Behavior of Laves Phase in Fe-10Cr Ferritic Alloy</li><li>Application of Combustion Synthesis to the Production of Actinide Bearing Nitride Ceramic Nuclear Fuels</li><li>A Molecular Dynamics Study of Helium-Vacancy Clusters Production due to Cascades in ?-Iron</li><li>Formation of Defect Clusters in SrTiO₃ Crystals Implanted with Xenon Ions</li><li>EXAFS Study on Irradiated ODS Ferritic Steel</li><li>In Situ TEM Observation of Precipitation of Zirconium Hydrides in Zircaloy-4 under Hydrogen Ion Implantation</li><li>Localized Deformation in Neutron-Irradiated Zirconium and Zircaloy-4</li><li>Effects of Neutron Irradiation and Thermal Aging on Mechanical Properties of ODS Ferritic Steels for Advanced Nuclear Systems</li><li>Fabrication and Evaluation of Plasma-Sprayed Molybdenum for Plasma Facing Materials</li><li>Experiment and FEM Simulation on Residual Stress of Cold Expansion Hole</li><li>Numerical Modeling of Microstructure Evolution and Dendrite Growth for Al-Si Alloy Casting during Low Pressure Die Casting</li><li>Material Structure Simulation Techniques and Applications</li><li>A Simplified CA Method for Simulating the Microstructure of Magnesium Alloy Components</li><li>Numerical Simulation on the Liquid Metal Flow of the Acceleration Phase in the Shot Sleeve of Cold Chamber Die Casting Process</li><li>Phase Field Modeling of Recrystallization Grain Growth during Re-Aging Process in Cu-Ni-Si Alloy</li><li>An Anisotropic Model for the Plastic Response of Powder Compacts</li><li>Simulation of Cold Ring Rolling Based on Rate Dependent Crystal Plasticity</li><li>Gas Velocity Measurements of Close-Coupled Atomizers</li><li>New Expression of the Chemical Bond in Perovskite-Type Oxides</li><li>Numerical Modeling of Scale Dependent Mechanical Properties of Metal Polycrystals</li><li>Crack Tip Dislocations and its Shielding Effect</li><li>First-Principles Studies on Grain Boundary Energies of [110] Tilt Grain Boundaries in Aluminum</li><li>Study on Dynamic Measurement of Thermal Stress during Solidification of a Casting Specimen</li><li>Use of Taguchi Method to Study a Robust Design for H-Sectioned Porous Beams during Rolling</li><li>Experimental Investigation of Isotropic and Kinematic Hardening in Al-3Cu-0.05Sn (wt%)</li><li>The Effect of Transformation Plasticity on Prediction of Tooth Distortion of Heat-Treated Helical Gear</li><li>Iterative Modification of Lumped Heat Capacity Method on Predicting Residual Stress and Distortion of Still-Quenched S45C Steel Cylinder</li><li>Surface Energy of In-Doped ZnO Studied by PAW+U Method</li><li>The Motion of Dislocation in Iron Pinning by Carbon Interstitials</li><li>Parameter Identification of Thermal Visco-Plastic Model Considering Dynamic Recrystallization</li><li>Effect of the Guide-Roll Positional Angle to the Stability of Radial Ring Rolling</li><li>Numerical Simulation of Compacting Process of Green Sand Molding Based on Sand Filling</li><li>Precise Rolling Force Calculation for the Tandem Cold Mill</li><li>Study on the Simulation of Grinding Based on Virtual Reality Technology</li><li>Finite Element Modeling the Effect of Pressing Temperature and Temperature Rise on ECAE Process of CP-Ti</li><li>Improved FE Modeling of Center Crack Occurrence in Tube Rounds during Two-Roll Rotary Rolling Process</li><li>Thermodynamic Analysis of the Fe-Mn-P Ternary Phase Diagram by Combining the First-Principles and CALPHAD Methods</li><li>3-D FE Simulation and Analysis on Radial-Axial Large Ring Rolling</li><li>Ab Initio Lattice Dynamics and Thermodynamics of MgS and Related II-VI Semiconductors in Zincblende Structure</li><li>Numerical Simulation and Optimisation of Sheet Metal Forming for Auto-Body Panel Using AutoForm Software</li><li>Stacking Fault Energy of Cu-Ga Alloys from First Principles</li><li>Modeling and Experimental Observation of the Plastic Anisotropy and Damage of CP-Ti during Multi-Pass ECAE</li><li>Point Defects in L1₀ Phase FePt Alloy: A First Principle Study</li><li>Cosmic Micromechanics Connection with Irreversible Deformation Processes in Spatially Extended Crystalline Systems</li><li>The Thermal, Mechanical and Electronic Properties of Nanoscale Materials: Ab Initio Study</li><li>Phase Field Calculations with CVM Free Energy within Square Approximation</li><li>The Study of Undercooling of Homogeneous Nucleation for Metallic Melting</li><li>Study on the Wrinkling and Edge Irregularity during Bending of a Roll-Formed Plate</li><li>Optimization of Bending Process of Large Marine Crankthrow by Computer Simulation</li><li>Physical Modeling on Recrystallization of Austenite in Steels in Thermo-Mechanical Processing</li><li>Nonlinear Steady Temperature Fields in Non-Homogeneous Materials</li><li>Mathematical Simulation of Billet Profile during Spray Forming Process</li><li>The Effect of Solidification Models on the Prediction Results of the Temperature Change of the Aluminum Cylinder Head Estimated by FDM Solidification Analysis</li><li>First Principles Study of Point Defects in Uranium Dioxide</li><li>Modeling of Contact Pressure in Sheet Metal Forming</li><li>Stability of Crystallographic Orientations in Equal Channel Angular Extrusion of HCP materials: Application to Texture Analysis in Titanium</li><li>Atomic Simulations on the Grain Subdivision of a Crystalline Metal</li><li>Heat and Mass Transfer in the Process of EB Penetration</li><li>Numerical Modelling of Spray Formed Grain Size Evolution</li><li>Development and Application of the Finite Element Analysis Program of the Stress-Based Forming Limit Criterion for Sheet Metal Forming</li><li>Optimum Cooling Channels Design and Thermal Analysis of an Injection Moulded Plastic Part Mould</li><li>Extraction of Elastic Modulus and Hardness of the Soft Metallic Films on Hard Substrates by Nanoindentation</li><li>Characterization of Precipitates by Three-Dimensional Electron Tomography</li><li>Study of the Early Stages of Recrystallization in a Cold Rolled ELC Steel Using FIB-EBSD Tomography</li><li>Determining the Surface Properties and Inherent Properties of Solid Materials Using Material-Independent Indentation Technique</li><li>Direct Observation of Nanostructural Fluctuation during Radiation-Induced Amorphization</li><li>Reciprocating Friction and Wear Behavior of WC-Co Based Cemented Carbides Manufactured by Electro-Discharge Machining</li><li>Sulfide Precipitations in Steel and its Role of a Residual Level of Copper</li><li>Stress Distribution in Be Compact Tension Specimen</li><li>Effect of Structure and Morphology on Photo-Oxidation Degradation of Polyethylene</li><li>Physical Aging and Creep Behavior of Poly(Methyl Methacrylate)</li><li>Structural Characterization of Cu₅₀Zr₄₅Ti₅ Glassy Alloy under Thermal Annealing and Electron Irradiation</li><li>Effect of Mg Content on the Precipitation in Al-Mg-Ge Alloys</li><li>Effects of Transformation Stress and Deformation before Austenitization on Nucleation of Intragranular Bainite</li><li>Growth and Characterization of Pb(Mg_1/3Nb_2/3)O₃ Crystals by a Single-Step Low-Temperature Process</li><li>Creep Characterization of Power-Law Materials through Pseudo-Steady Indentation Tests</li><li>Variation of Hardness with Microstructure Evolutions in Metastable ? Titanium Alloy TIMETAL^(R)LCB</li><li>The Relationship between the Bending Direction and Burgers Vector of Threading Dislocations at a Coherent Heterointerface in AlGaN/AlN Layers</li><li>Electron Holography on Charging Effect in Non-Conductive Materials</li><li>Physical Properties of Li₂Pd₃B and Li₂Pt₃B Superconductors</li><li>Characterization of Nano-Scale Particles in Hot-Rolled, High Strength Low Alloy Steels (HSLA)</li><li>"In Situ-Tracking" Observation of Stainless Steel Microstructural Development during Elevated Service Using EBSD and SEM</li><li>Site-by-Site Electronic Structure Analysis of Al-Containing Complex Compounds Using Channeling EELS and First Principles Calculations</li><li>X-Ray Reflectivity Studies of Pt/AlN Multilayered Films</li><li>Stoichiometric Study of Iron Sulfide Prepared by Mechanochemical Reaction</li><li>Effect of Shot-Peening on Fine Grain Steel</li><li>A Study on the Microstructure of Ultra Low Carbon Bainitic Steels by RPC Technique</li><li>In Situ Analysis of Phase and Magnetic Transformation Process in Fe-Pt Nanoparticles</li><li>Effect of Isothermal Aging on the Growth and Morphology of the Intermetallic Compounds Formed at the Solder/Cu Interface of the Lead - Free Solder Joint</li><li>Microstructural Stability of Duplex Stainless Steel Weldments</li><li>Investigation of Phase Composition in Dense and Porous Gelcast Alumina Sintered under Argon Atmosphere</li><li>Thermal Degradation and Kinetic Characterizations of Jatropha Waste under Isothermal and Dynamic Experiments</li><li>A Characteristic of Spherical Indentation Curve and its Application in Measuring Material Properties</li><li>Transmission Electron Microscopy Studies of Oxidation of Single Crystal Silicon Carbide at High Temperature</li><li>Corrosion Behavior of Pure Titanium Produced by MIM Process under SSRT Condition</li><li>Electrochemical Dissolution Characteristics of Magnesium Alloy Produced by Roll Compaction Process</li><li>Evaluation of Corrosion Resistance of WC-Co Based Alloys inH₂SO₄</li><li>Crystallographic Analyses on Cracks Initiated by Rolling Contact Fatigue in High Carbon Chromium Bearing Steel</li><li>Particle Size Characterisation of Tin Oxide (SnO₂) Precipitated by Various Techniques: Consistency of Data</li><li>Preparation and Characterisation of TiO₂ Thick Films Fabricated by Anodic Oxidation</li><li>Preparation and Characterisation of TiO₂ Thick Films Fabricated by Electrophoretic Deposition</li><li>Preparation and Characterisation of TiO₂ Thick Films by Gel Oxidation</li><li>An Investigation of TiO₂ Thin Film in Dye Sesitized Solar Cells by Electrophoresis Method</li><li>A Study on Dynamic Stability of the Fe₃O₄ Magnetorheological Fluid</li><li>High Cycle Fatigue Behavior of Thermally Oxidized Ti6Al4V Alloy</li><li>Fast and Non Destructive Technique to Characterize Thin Film Porosity: Example on Cubic Mesoporous TiO2 Thins Films </li><li>Determination of Material Constants for Crack Size-Dependence Crack Growth Model</li><li>Acoustic Emission as Analyzing Tool for Wear Mechanisms of Composite Materials</li><li>Heating Effects in WC-Co Cemented Carbides as a Result of Reciprocative Dry Sliding Friction</li><li>Fatigue and Damage Testing Rubber with Steel Cord Materials Combined</li><li>Transition Method of Geometrically Similar Element to Calculate the Stress Concentration Factor of Notch</li><li>Multi-Scale Modeling of the Corrosion of Metals under Atmospheric Corrosion</li><li>Cyclic Deformation of Al-Mg Single Crystals with a Single Slip Orientation</li><li>Creep Damage Evaluation by Hardness in Advanced High Cr Ferritic Steels</li><li>Thermoelastic Analysis of Crack Propagation in AA6082 Friction Stir Welded Joints</li><li>The Method of Torsional Cylindrical Shaft with Annular Notch in Quadric Coordinate</li><li>Investigation of Deformation Gradients in Surface Zone of Mechanically Surface Treated CuZn30</li><li>Analysis of Creep Deformation Process of Heat Resistant Steels Using Positron Annihilation Lifetime</li><li>A Combination of Mathematical Morphology and Thermal Analysis of Wear Debris Explaining Polymer Sliding Mechanisms</li><li>An Investigation on Failure Analysis of Titanium Gas Turbine Compressor Blades</li><li>"In Situ-Tracking" Evaluation for Corrosion Progress at Fusion Boundary of Dissimilar Steel Welded Joints in H₂S Containing Solution</li><li>Characteristics of Electrical Discharge Pulse Sound for Hammering Test</li><li>The Influencing Factors and Assessment Rule of Fatigue Life of Shaft Based on Product Lifecycle Management</li><li>Safe Decomposition of Asbestos by Mechano-Chemical Reaction</li><li>Three-Dimensional Finite Element Modelling of Laser Shock Peening Process</li><li>Effect of Different Surface Treatments on Fatigue Life of NiTi Wires</li><li>Numerical Simulation of Microstructural Evolution during Aging of Cu-Ni-Fe Alloys</li><li>Precipitation in Aged N-Containing Austenitic Stainless Steels</li><li>A Theoretical Model for Digestive Ripening</li><li>Design of Structure, Composition and Heat Treatment Process for High Strength Steel</li><li>Phase-Field Simulation of ?"(D0₂₂) Precipitation in Ni Base Superalloys</li><li>Preparation and Thermal Property of Phase Change Material Microcapsules by Phase Separation</li><li>Metastable Precipitates and their Misfit Strains in a Cu-0.9wt%Be Single Crystal</li><li>Growth of Individual Austenite Grains Measured with 3DXRD Microscopy</li><li>HRTEM Observation of ?'-Phase in Cu-40.26 at.% Zn Alloy</li><li>Interfacial Structural Modification of Martensitic Transformations</li><li>Shape Memory Behavior of Ti-50.9at%Ni Alloy after ECAE Processes</li><li>A Study of the Microstructural Evolution and Strengthening Effects of Non-Spherical Precipitates in an Al-Cu-Based Alloy</li><li>Mechanical Properties of Cu-4.0wt%Ni-0.95wt%Si Alloys with and without P and Cr Addition</li><li>Specimen-Size Dependence of the Martensitic Transformation Temperature of Yttria Doped Zirconia</li><li>Phase Diagram and Precipitation Behaviour in Ni-Rich Region of Ni-Ta-Al Ternary System</li><li>Effect of Magnetic Field on Isothermal Martensitic Transformation in SUS304L Stainless Steel</li><li>Relation between Diffuse Scatterings and Fermi Surface Nesting in Iron Doped Ti-Ni Alloys</li><li>Textures in AZ31 Magnesium Alloy Induced by Repeated Cross Wavy Rolling</li><li>Influence of Repeated Quenching After Carburizing on Prior Austenite Grain Size</li><li>Femtosecond Laser Synthesis of Polymorphic Diamond from Highly Oriented Pyrolytic Graphite</li><li>Hydrogen Diffusivity and Permeability In Pd_50-xTi₅₀(Cr, Fe)_x Alloys</li><li>Two-Phase Microstructures Formed by Phase-Separations of Ordered Precipitates in Fe-Si-V Alloys</li><li>TEM Observations of Two-Phase Microstructure Formed by Phase Separation of Gamma-Prime Precipitates in Ni-Al-Si Alloys</li><li>TEM Observations of Precipitation of Coherent L1₂ and D0₂₂ Ordered Phases in Ni-V-Ge Alloys</li><li>Phase Transformations in the Metallic Materials Being Electrodeposited and their Application for the Development of Advanced Technologies for Anticorrosive Protection of Canned-Food Steel Sheet</li><li>Development of Nanocrystalline Copper-Refractory Metal Alloys</li><li>Surface Microstructure and Corrosion Resistance of 316L Stainless Steel after High Current Pulsed Electron Beam Treatment</li><li>Intergranular Corrosion of Ultrafine Grain Copper Fabricated by ECAP</li><li>Improvement of Surface Roughness on ABS 400 Polymer Using Design of Experiments (DOE)</li><li>Fatigue Life Enhancement by Surface Coating of Ni/Cu Multilayered Films</li><li>Dependence of Vickers Hardness on Annealing Temperature at Co/Cu Multilayered Films</li><li>Influence of Surface Finishing and Binder Phase on Friction and Wear of WC Based Hardmetals</li><li>Subsurface Microstructure Induced by Sliding Wear in a Copper Single Crystal</li><li>The Influence of PtFe and Nano Aluminium Particles on the Anticorrosive Performance of Waterborne Coating</li><li>Sensitivity to Fatigue Cracks Initiation of Symmetrical <110>Tilt Grain Boundaries in Pure Copper Bicrystals in 1M NaNO₂ Solution</li><li>An Overview of Cold Spray Technique</li><li>Structural and Electrical Properties of ZnO Films on Freestanding Thick Diamond Films</li><li>TEM Characterization of 2? Tilt Grain Boundary in Alumina</li><li>Effect of Surface on Recrystallization</li><li>First-Principle Study of Sulfur Adsorption on Ir(100) Surface</li><li>Thermodynamic Processes and Phenomena Induced by High Current Pulsed Electron Beam</li><li>Surface Characteristics and Corrosion Behavior of Ti-4Al-2V Alloy Implanted with Al and Nb</li><li>Study of Metal Coating on Lead-Free High Refractive Index Glass Prepared from Local Sand</li><li>Tribological Properties of Ni/Cu Multilayers</li><li>The Surface Analysis of Melted Arc Copper Beads</li><li>Characterization of Coating Morphology and Heat-Resistance in Plasma Electrolytic Oxidation of Magnesium Alloy</li><li>Dislocation Structure Analysis of Low Angle Tilt Grain Boundaries in Alumina by Elastic Theory</li><li>Atomic Force Microscopy of Sintered and Thermoplastic Polyimide Surfaces after Macroscopic Wear Tests</li><li>Effects of Laser Processing Parameters on Grain Boundary Character Distribution and Corrosion Resistance of Austenite Stainless Steel</li><li>Surface Layer Hardness of Austenitic Stainless Steel via Low Temperature Plasma Carburizing and/or Nitriding</li><li>Interfacial Microstructure of Titanium Nitride - Titanium Diboride Composite Synthesized by Hot Shock Compaction</li><li>Investigation on Fatigue Crack Growth Behaviour in S45C Steel by Water Cavitation Peening with Aeration</li><li>Deformation Induced Ferrite Transformation in Microalloyed Steels: Theory and Application</li></ul>