Advanced Structural Materials III

<ul><li>High-Entropy Alloys - A New Era of Exploitation</li><li>Synthesis of Si₃N₄ from Na₂SiF₆ as a Solid Precursor: Thermodynamic Study</li><li>Thixotropic Behaviour of a Cu - Eutectic Sn-Pb Slurry</li><li>Effect of Plastic Deformation on the Isothermal FCC/HCP Phase Transformation during Aging of Co-27Cr-5Mo-0.05C Alloy</li><li>Effect of Fast Annealing on Microstructure and Mechanical Properties of Non-Oriented Al-Si Low C Electrical Steels</li><li>In Vitro Bioactivity Assessment of Ceramics in the SiO₂-CaO-MgO System</li><li>Self-Affine Quasi-Static Fracture of Soda-Lime Glass</li><li>Thermal Analysis and Microstructure Comparison Between A356 Aluminum Alloy and A356/15%vol. SiC_P Cast Composite Modified with Strontium</li><li>WC / Stainless Steel Joints Produced by Direct Diffusion Bonding Using a Ni-Foil Interlayer</li><li>Development of Instrumented Composite Cylinders</li><li>Composite Coatings Elaborated by Plasma Spraying of Dry Coated Particles </li><li>Prediction of Microstructure and Distribution of Solute in Al-Zn-Mg Non-Dilute Alloys</li><li>Austenite-Ferrite Transformation in Hot Rolled Mn-Cr-Mo Dual Phase Steels</li><li>Austenite-Ferrite Transformation in Non-Oriented Electrical Steels</li><li>Self-Affine Analysis of Fractures Surfaces of an Aluminum Alloy Using Fractographic Techniques</li><li>The Role of Ti Inoculation of Al-Zn-Si Coating Alloys on the Formation of Intermetallic Compounds by Interaction with Solid Steel</li><li>Effect of Deformation Temperature on the Hot Ductility of Non-Oriented Electrical Steels</li><li>Synthesis of Si₃N₄ from Na₂SiF₆ as a Solid Precursor: Microstructural Evolution</li><li>Microstructure and Mechanical Properties of Al/Sic_p Composites with Multimodal Size Distribution of Reinforcements</li><li>Sintering + HIP of Ultrafine WC-Co Hardmetals</li><li>Biomimetic Coating on Zirconia Composites Induced by Chemical Treatment</li><li>Microstructural Mechanisms of Fatigue Failure in PA66 Fibers</li><li>Degradation of Al/SiCp Composites Processed with Fly Ash via Reactive Infiltration</li><li>On the Fluid Flow and Mixing Phenomena in Ladles Equipped with Impeller and Gas Purging for Degassing of Al-Based Alloys</li></ul>