Advanced Structural Materials II

<ul><li>Multiscale Approach to Texture-Microstructure Coupling</li><li>EDS Assisted Phase Differentiation in Orientation Imaging Microscopy</li><li>Microstructural Evolution of a Commercial 0.04%C Steel During Batch Annealing </li><li>Characterization of Global and Local Textures in Hot Rolled CGO Fe3%Si </li><li>Mechanical Properties of Ultra Clean Low C/Cr Stabilized Annealed Sheets</li><li>Determination of the Work Hardening Exponent by the Hollomon and Differential Crussard-Jaoul Analyses of Cold Drawn Ferrite-Pearlite Steels</li><li>Microstructure and Self-Affine Fracture Surface Parameters in Steel</li><li>Dislocation Mechanisms and Plasticity of Quasicrystals: TEM Observations in Icosahedral AlPdMn </li><li>In Situ Deformation at 850 degreesC of Standard and Rafted Microstructures of Nickel Base Superalloys</li><li>Compressive Mechanical Properties of Nanostructured Intermetallic Alloys Al₃Ti-X (X = Mn or Fe)</li><li>The Effect of Hot Rolling on Room Temperature Ductility of a NiAl Intermetallic Compound</li><li>Grain Refinement during Superplastic Deformation of Coarse-Grained Al-Mg-Cu Alloys </li><li>Strain-Resistivity Behavior of a Ti-45Ni-5Cu Shape Memory Alloy during Superelastic and SATWME Cycling</li><li>Micro and Macromechanical Study of Stress-Induced Martensitic Transformation in a Cu-Al-Be Polycrystalline Shape Memory Alloy</li><li>Thermal Stability, Structure and Mechanical Properties of TiSiN Coatings Prepared by Reactive DC Magnetron Co-Sputtering</li><li>Joining of Silicon Nitride to Metal (Mo and Ti) Using a Cu-Foil Interlayer </li><li>Properties of AlN-Based Magnesium-Matrix Composites Produced by Pressureless Infiltration</li><li>High Temperature Chemical Interaction Between SSiC Substrates and Ag-Cu Based Liquid Alloys in Vacuo</li><li>High Temperature Chemical Interaction Between SiO₂ Substrates and Ag-Cu Based Liquid Alloys in Vacuo</li><li>Synthesis of Al₂O₃-Ni₃Al Cermets by Room-Temperature Ball Milling of Al, Ni and Al₂O₃ Mixtures</li><li>High Temperature Oxidation of Cr-ZrO₂-Al₂O₃ Composite Fabricated by Mechanical Alloying and Spark Plasma Sintering</li><li>The Transformation of Co-Rich Alloys Produced by Mechanical Alloying</li><li>Nanocrystalline Intermetallic Mg₂Ni Produced in a Batch Scale Mill</li><li>Use of Newton Thermal Analysis for the Prediction of the Amount of Microconstituents Formed during Solidification</li><li>Newton Thermal Analysis of Gray and Nodular Eutectic Cast Iron</li><li>Effect of Titanium and Strontium Addition on the Fluidity of A319 and A356 Aluminum Alloys</li><li>Microstructural and Mechanical Characterization of Nitinol GTAW and FB Welds of Titanium</li><li>Macro-Micro Modeling and Simulation of Solidification Kinetics of Pb-Sn Alloys</li><li>Time-Dependent Rheological Behavior of Liquid Crystalline Dispersions</li><li>Preparation of Size Controlled Nanometric Spheres of Colloidal Silica for Synthetic Opal Manufacture</li><li>Bioactive Zirconia Composites</li><li>Thermal Analysis and Evolution of Phases during the Synthesis of Cordierite with Kyanite and Talc</li><li>Direct Extrusion Production of Monolithic Ceramics with Different Cross Section</li><li>Biomimetic Process in Metals</li></ul>