Problems of Emergency Situations: Materials and Technologies II

<ul><li>Preface</li><li>Chapter 1: Properties and Processing Technologies of Structural Metals</li><li>Low Cycle Fatigue of Structural Alloys</li><li>Planning an Experiment for Low-Cycle Fatigue under Conditions Deep Cooling</li><li>Repeatability of Sheet Material Formation Results and Interchangeability of Processing Modes at Multi-Pass Laser Formation</li><li>Stress-Strain State and Structural-Phase Transformations of Metal Articles Obtained by Laser Shaping</li><li>Investigation of the Properties of Powder Materials Using Computer Modeling</li><li>Analysis of the Effect of Mechanical Oscillations Generated during Welding on the Structure of Ductile Constituent of Products Made of Steel 10G2FB</li><li>Chapter 2: Coatings and Surface Treatment</li><li>Electrochemical Synthesis of Crystalline Niobium Oxide</li><li>Research of the Influence of Silicate Fillers on Water Absorption and Microstructure of Styrene-Acrylic Dispersion Coatings</li><li>Alternative Strengthening of Jewelry Tools Using Chemical-Thermal and Local Surface Treatments</li><li>Electrochemical Formation of Oxide Films on the Titanium Alloy of Ti6Al4V in Ethylene Glycol-Water Electrolytes to Produce Bioinert Coatings and Increase the Corrosion Resistance of Medical Implants</li><li>Research of the Microstructure of the Deposited Layer during Electric Arc Surfacing with Control Impacts</li><li>Application of Thermo-Frictional and Chemical-Thermal Methods Treatments for Surface Strengthening of Materials</li><li>Investigation of the Heat-Affected Zone Properties During Cladding of Power Equipment with Austenitic Materials Using Control Mechanical Impacts on the Strip Electrode</li><li>Studying the Effect of Fuel Elements Structural Materials Corrosion on their Operating Life</li><li>Chapter 3: Polymers and Composites</li><li>Research of Safe Technology of Impregnation of Heated Reinforcing Materials with Binder</li><li>Use of Silicone Materials in Modern Structures of Highly Functional Technical Means of Rehabilitation</li><li>The Thermal Destruction and Coke Formation Intensity Influence on the Delamination and Destruction of Fiber Reinforced Plastics with a Unidirectional Filler under High Temperature Conditions</li><li>The Deformable and Strength Characteristics of Nanocomposites Improving</li><li>Experimental Substantiation of Antimicrobial Efficiency of a New Composite Polymeric Material Based on Poly(2-Hydroxyethyl Methacrylate) under the Action of Low-Intensity Current without External Power Supplies</li><li>An Experimental Study on Elastic and Strength Properties of Addictively-Manufactured Plastic Materials</li><li>Sorption Resistance Studying of Environmentally Friendly Polymeric Materials in Different Liquid Mediums</li><li>Chapter 4: Functional Materials and Chemical Technologies</li><li>Thermodynamics of Solid-Phase Exchange Reactions Limiting the Subsolidus Structure of the System MgO-Al₂O₃-FeO-TiO₂</li><li>Thiocarbamide-Citrate Electrolytes as an Alternative to Cyanide Electrolytes in Solving the Problems of Environmental Protection and Prevention of Emergency Situations</li><li>Influence of Basic Oxides Ratio Li₂O/Al₂O₃, SiO₂/Al₂O₃ and H₂O/Al₂O₃ on Physical, Rheological and Colloidal-Chemical Properties of Lithium Containing Alumosilicate Suspensions in the System xLi₂O-Al₂O₃-nSiO₂-mH₂O</li><li>Metal Hydride Technologies for Separation of Hydrogen Isotopes</li><li>Influence of ANO₃ and ANO₃?nH₂O Nitrates on the Deformation Properties of Aluminosilicate Adhesives for Wood Products and Structures</li><li>Research of Operational Properties of Household Fabrics for Production of Protective Masks</li><li>Chapter 5: Materials and Technologies for Environmental Engineering</li><li>Colloid-Chemical Regularities of Reagent Wastewater Treatment of Dairies</li><li>Use of PET Granules for Improving a Surface Runoff Treatment</li><li>Co-Mo-W Galvanochemical Alloy Application as Cathode Material in the Industrial Wastewater Treatment Processes</li><li>Treatment of Real Wastewater from Organic Contaminants by Using Biochar</li><li>Synthesis of ActivaTED Carbon from Plant Raw Materials by a Self-Activation Modified Method</li><li>Ecological Aspects of Clay Sorption Materials Usage in Leather and Fur Production Technologies</li><li>Utilization of Galvanic Enterprises Sewage</li><li>Ash-Slag Waste of the Coal-Fired Thermal Power Plant as a Resource for the Construction Industry</li><li>Technology Placement of Drilling Waste Storage with the Use of Soil Cement Screens</li><li>Research of Technical and Economic Properties of Material of Porous Fuel Briquettes from the Solid Combustible Waste Impregnated with Liquid Combustible Waste</li><li>Chapter 6: Building Materials</li><li>Fine-Grained Concrete for Repair and Restoration of Building Structures</li><li>Experimental Studies of Fiber-Reinforced Concrete under Axial Tension</li><li>Experiment Planning for Prospective Use of Barium-Containing Alumina Cement for Refractory Concrete Making</li><li>Influence of Temperature Fields on the Quality of Dried Wood Products</li><li>Investigation of the Limit of Fire Resistance of a Steel Beam at Loss of Integrity of a Fire-Resistant Lining</li><li>Development of a Bitumen-Polymer Composition, Resistant to Atmospheric Influences, Based on Petroleum Bitumen and their Properties Study</li><li>Chapter 7: Materials and Technologies for Preventing of Technogenic Emergencies</li><li>Research of the Chlorine Sorption Processes when its Deposition by Water Aerosol</li><li>Experimental Study of the Insulating Properties of a Lightweight Material Based on Fast-Hardening Highly Resistant Foams in Relation to Vapors of Toxic Organic Fluids</li><li>Influence of Cracks on the Safe Functioning of Building Structures</li><li>Solution of the Problem of Operational Reliability and Environmental Safety of Transport Pipeline Systems</li><li>Hydrogen Sulphide in Industrial Enterprises Water Management Infrastructure - The Factor of Chemical and Microbiological Corrosion Concrete Degradation of Water Facilities</li><li>Investigation of the Influence of the Physical Properties of Landfill Soils on the Stability of Slopes in the Context of Solving Civil Security Problems</li><li>Detection of Dangerous Defects and Damages of Steel Building Structures by Active Thermography</li><li>Applying Ultrasound Detection Devices to Examine P????rties of Concrete Structures</li><li>Numerical Evaluation of Safety Wall Bending Strength during Hydrogen Explosion</li><li>Chapter 8: Materials and Technologies of Fire Protection</li><li>Regarding the Formation of Wood Material Fire Protection and the Mechanism of its Action</li><li>Research of Pyrophoric Compounds in Order to Reduce their Hazard</li><li>Investigation of Gas Formation Processes in Cotton Fabrics Impregnated with Binary Compositions of Ethyl Silicate - Flame Retardant System</li><li>The Use of Sol-Gel Method for Obtaining Fire-Resistant Elastic Coatings on Cotton Fabrics</li><li>Investigation of the Processes of Formation of a Fire Retardant Coating</li><li>Thermodynamic Study of Fire-Protective Material</li><li>Features of Evaluation of Fire Resistance of Reinforced Concrete Ribbed Slab under Combined Effect "Explosion-Fire"</li><li>Enhancing the Fire Resistance of Concrete Structures by Applying Fire-Retardant Temperature-Resistant Metal Coatings</li><li>Research of Fire Resistance of Elements of Steel Frames of Industrial Buildings</li><li>Modeling of Non-Stationary Heating of Steel Plates with Fire-Protective Coatings in Ansys under the Conditions of Hydrocarbon Fire Temperature Mode</li><li>Determination of the Fire-Retardant Efficiency of Magnesite Thermal Insulating Materials to Protect Metal Structures from Fire</li><li>Research of Mechanism of Fire Protection with Wood Lacquer</li><li>Investigation of the Effect of Fillers on the Properties of the Expanded Coke Layer of Epoxyamine Compositions</li></ul>