CMOS Analog Circuit Design
3rd Edition
Published on 6. October 2016
Book
Hardback
816 pages
978-0-19-976507-2 (ISBN)
Description
Respected authors Phil Allen and Doug Holberg bring you the third edition of their popular textbook, CMOS Analog Circuit Design. Working from the forefront of CMOS technology, Phil and Doug have combined their expertise as engineers and academics to present a cutting-edge and effective overview of the principles and techniques for designing circuits. Their two main goals are:
* to mix the academic and practical viewpoints in a treatment that is neither superficial nor overly detailed
* to teach analog integrated circuit design with a hierarchically organized approach
Most of the circuits, techniques, and principles presented in CMOS Analog Circuit Design come directly from the authors' industrial experience, making the book a valuable resource for both practicing engineers and students taking courses in analog electronics or CMOS analog design.
The trademark approach of Phil and Doug's textbook is its design recipes, which take readers step-by-step through the creation of real circuits, explaining and demystifying complex design problems. The book provides detailed coverage of often-neglected areas and deliberately leaves out bipolar analog circuits, since CMOS is the dominant technology for analog integrated circuit design. Appropriate for advanced undergraduates and graduate students with background knowledge in basic
electronics-including biasing, modeling, circuit, analysis, and frequency response-CMOS Analog Circuit Design, Third Edition, presents a complete picture of design (including modeling, simulation, and testing) and enables readers to undertake the design of an analog circuit that can be implemented by CMOS
technology.
New to This Edition
* An updated Chapter 2 that reflects the latest technology on twin-well shallow-trench-isolation CMOS
* Expanded coverage of such topics as frequency response, feedback, distortion, noise, bootstrapped voltage references, and photosensitivity
* A new appendix on layout techniques
* to mix the academic and practical viewpoints in a treatment that is neither superficial nor overly detailed
* to teach analog integrated circuit design with a hierarchically organized approach
Most of the circuits, techniques, and principles presented in CMOS Analog Circuit Design come directly from the authors' industrial experience, making the book a valuable resource for both practicing engineers and students taking courses in analog electronics or CMOS analog design.
The trademark approach of Phil and Doug's textbook is its design recipes, which take readers step-by-step through the creation of real circuits, explaining and demystifying complex design problems. The book provides detailed coverage of often-neglected areas and deliberately leaves out bipolar analog circuits, since CMOS is the dominant technology for analog integrated circuit design. Appropriate for advanced undergraduates and graduate students with background knowledge in basic
electronics-including biasing, modeling, circuit, analysis, and frequency response-CMOS Analog Circuit Design, Third Edition, presents a complete picture of design (including modeling, simulation, and testing) and enables readers to undertake the design of an analog circuit that can be implemented by CMOS
technology.
New to This Edition
* An updated Chapter 2 that reflects the latest technology on twin-well shallow-trench-isolation CMOS
* Expanded coverage of such topics as frequency response, feedback, distortion, noise, bootstrapped voltage references, and photosensitivity
* A new appendix on layout techniques
More details
Edition
3rd edition
Language
English
Place of publication
Oxford
United Kingdom
Publishing group
Oxford University Press
Target group
Professional and scholarly
Dimensions
Height: 235 mm
Width: 191 mm
Weight
10 gr
ISBN-13
978-0-19-976507-2 (9780199765072)
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Classification
Other editions
Previous edition
P.E. Allen
CMOS Analog Circuit Design
Book
02/2002
2nd Edition
Oxford University Press Inc
€65.60
Article exhausted; check for reprint
Persons
Phillip E. Allen is Professor Emeritus of Electrical and Computer Engineering at Georgia Tech.
Douglas R. Holberg is a Technical Consultant.
Douglas R. Holberg is a Technical Consultant.
Content
Chapter 1 - Introduction and Background
1.1 Analog Integrated Circuit Design
1.2 Notation, Symbology and Terminology
1.3 Analog Signal Processing
1.4 Example of Analog VLSI Mixed-Signal Circuit Design
Chapter 2 - CMOS Technology
2.1 Basic MOS Semiconductor Fabrication Processes
2.2 The PN Junction
2.3 The MOS Transistor
2.4 Passive Components
2.5 Other Considerations of CMOS Technology
Chapter 3 - CMOS Device Modeling
3.1 Simple MOS Large-Signal Model (SPICE LEVEL 1)
3.2 Other MOS Large-Signal Model Parameters
3.3 Small-Signal Model for the MOS Transistor
3.4 Computer Simulation Models
3.5 Subthreshold MOS Model
3.6 SPICE Simulation of MOS Circuits
Chapter 4 - Analog CMOS Subcircuits
4.1 MOS Switch
4.2 MOS Diode/Active Resistor
4.3 Current Sinks and Sources
4.4 Current Mirrors
4.5 Current and Voltage References
4.6 Bandgap Reference
Chapter 5 - CMOS Single Stage Amplifiers
5.1 Inverters
5.2 Differential Amplifiers
5.3 Cascode Amplifiers
5.4* Current Amplifiers
5.5* Output Amplifiers/Buffers
Chapter 6 - Simple Operational Amplifiers*
6.1 Design of CMOS Op Amps
6.2 Compensation of Op Amp
6.3 Design of Two-Stage Op Amps
6.4 Power-Supply Rejection Ratio of Two-Stage Op Amps
6.5 Cascode Op Amps
6.6 Simulation and Measurement of Op Amps
6.7 Macromodels for Op Amps
Chapter 7 - Complex Operational Amplifiers*
7.1 Buffered Op Amps
7.2 High-Speed/Frequency Op Amps
7.3 Differential-Output Op Amps
7.4 Micropower Op Amps
7.5 Low Noise Op Amps
7.6 Low Voltage Op Amps
Chapter 8 - Comparators
8.1 Characterization of a Comparator
8.2 Two-Stage, Open-Loop Comparator Design
8.3 Other Open-Loop Comparators
8.4 Improving the Performance of Open-Loop Comparators
8.5 Discrete-Time Comparators
8.6 High-Speed Comparators
Chapter 9 - Digital-Analog and Analog-Digital Converters
9.1 Introduction and Characterization of Digital-Analog Converters
9.2 Current, Voltage and Charge Scaling Digital-Analog Converters
9.3 Extending the Resolution of Parallel Digital-Analog Converters
9.4 Serial Digital-Analog Converters
9.5 Introduction and Characterization of Analog-Digital Converters
9.6 Serial Analog-Digital Converters
9.7 Medium Speed Analog-Digital Converters
9.8 High Speed Analog-Digital Converters
9.9 Oversampling Converters
Appendix A Circuit Analysis for Analog Circuit Design
Appendix B Integrated Circuit Layout
Appendix C CMOS Device Characterization
Appendix D Time and Frequency Domain Relationship for Second-Order Systems
Appendix E Switched Capacitor Circuits
1.1 Analog Integrated Circuit Design
1.2 Notation, Symbology and Terminology
1.3 Analog Signal Processing
1.4 Example of Analog VLSI Mixed-Signal Circuit Design
Chapter 2 - CMOS Technology
2.1 Basic MOS Semiconductor Fabrication Processes
2.2 The PN Junction
2.3 The MOS Transistor
2.4 Passive Components
2.5 Other Considerations of CMOS Technology
Chapter 3 - CMOS Device Modeling
3.1 Simple MOS Large-Signal Model (SPICE LEVEL 1)
3.2 Other MOS Large-Signal Model Parameters
3.3 Small-Signal Model for the MOS Transistor
3.4 Computer Simulation Models
3.5 Subthreshold MOS Model
3.6 SPICE Simulation of MOS Circuits
Chapter 4 - Analog CMOS Subcircuits
4.1 MOS Switch
4.2 MOS Diode/Active Resistor
4.3 Current Sinks and Sources
4.4 Current Mirrors
4.5 Current and Voltage References
4.6 Bandgap Reference
Chapter 5 - CMOS Single Stage Amplifiers
5.1 Inverters
5.2 Differential Amplifiers
5.3 Cascode Amplifiers
5.4* Current Amplifiers
5.5* Output Amplifiers/Buffers
Chapter 6 - Simple Operational Amplifiers*
6.1 Design of CMOS Op Amps
6.2 Compensation of Op Amp
6.3 Design of Two-Stage Op Amps
6.4 Power-Supply Rejection Ratio of Two-Stage Op Amps
6.5 Cascode Op Amps
6.6 Simulation and Measurement of Op Amps
6.7 Macromodels for Op Amps
Chapter 7 - Complex Operational Amplifiers*
7.1 Buffered Op Amps
7.2 High-Speed/Frequency Op Amps
7.3 Differential-Output Op Amps
7.4 Micropower Op Amps
7.5 Low Noise Op Amps
7.6 Low Voltage Op Amps
Chapter 8 - Comparators
8.1 Characterization of a Comparator
8.2 Two-Stage, Open-Loop Comparator Design
8.3 Other Open-Loop Comparators
8.4 Improving the Performance of Open-Loop Comparators
8.5 Discrete-Time Comparators
8.6 High-Speed Comparators
Chapter 9 - Digital-Analog and Analog-Digital Converters
9.1 Introduction and Characterization of Digital-Analog Converters
9.2 Current, Voltage and Charge Scaling Digital-Analog Converters
9.3 Extending the Resolution of Parallel Digital-Analog Converters
9.4 Serial Digital-Analog Converters
9.5 Introduction and Characterization of Analog-Digital Converters
9.6 Serial Analog-Digital Converters
9.7 Medium Speed Analog-Digital Converters
9.8 High Speed Analog-Digital Converters
9.9 Oversampling Converters
Appendix A Circuit Analysis for Analog Circuit Design
Appendix B Integrated Circuit Layout
Appendix C CMOS Device Characterization
Appendix D Time and Frequency Domain Relationship for Second-Order Systems
Appendix E Switched Capacitor Circuits