Proceedings of the International Conference of Mechatronics and Cyber-MixMechatronics - 2017

 
 
Springer (Verlag)
  • erschienen am 7. August 2017
  • |
  • IX, 246 Seiten
 
E-Book | PDF mit Adobe-DRM | Systemvoraussetzungen
E-Book | PDF mit Wasserzeichen-DRM | Systemvoraussetzungen
978-3-319-63091-5 (ISBN)
 

This first edition of conference Proceedings reflects the expansion of the field of Mechatronics, which has now taken its place in the world of newer transdisciplinary fields of Adaptronics, Integronics, and Cyber-Mix Mechatronics. It presents state-of-the art advances in Mechatronics, Adaptronics, Integronics and Cyber-Mix-Mechatronics.

The 1st International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME was organized by the National Institute of R&D in Mechatronics and Measurement Technique in Bucharest (Romania), on September 7th-8th, 2017 and attracted specialists from all over the world-including North America, South America, and Asia. In addition to presenting research results, ICOMECYME also offered a forum for exchange between R&D experts.

1st ed. 2018
  • Englisch
  • Cham
  • |
  • Schweiz
Springer International Publishing
  • 100
  • |
  • 189 s/w Abbildungen, 100 farbige Tabellen
  • |
  • 189 schwarz-weiße Abbildungen, 100 farbige Tabellen, Bibliographie
  • 40,13 MB
978-3-319-63091-5 (9783319630915)
10.1007/978-3-319-63091-5
weitere Ausgaben werden ermittelt
  • Intro
  • Preface
  • Contents
  • Fluctuation of Contact Voltage During Fretting Phases
  • Abstract
  • 1 Introduction
  • 1.1 Samples Used and Experimental Set-up
  • 2 Study of Contact Voltage During the Three Fretting Phases
  • 3 Study of Contact Area Worn Out by Friction During the Three Fretting Phases
  • 4 Conclusion
  • References
  • Mathematical Model for Determining the Contour of a New Type of Profiled Rotor
  • Abstract
  • 1 Introduction
  • 2 The Constructive Solution Description
  • 3 The Equations that Specifies the Curvilinear Contour of the Rotating Piston
  • 4 The Equations that Specifies the Circle Arc that Forms Part of the Rotor Contour
  • 5 The Equations that Specifies the Cavity Contour
  • 6 The Location of (Xi, Yi) on the Contour of the First Rotor Profile Quarter
  • 7 Conclusions
  • References
  • Reducing the Effects of Flooding Using Local Intelligent Systems
  • Abstract
  • 1 Introduction
  • 2 System Architecture
  • 3 Sensory System Implementation
  • 4 Use of the Fuzzy Model Mamdani Type for the Flood Warning
  • 5 Conclusions
  • Acknowledgements
  • References
  • Conceptual Model of Computerized Nationwide Scale Multiparameter Monitoring System for Drinking Water Quality
  • Abstract
  • 1 Introduction
  • 2 Model Description
  • 2.1 Image Processing Model
  • 2.2 Portable Metering Model
  • 2.3 Data Server Model
  • 3 Conclusion and Future Works
  • Acknowledgment
  • The Use of Microtehnologies Processing on Water Aeration Plants Construction
  • Abstract
  • 1 Introduction
  • 2 Construction of the Microbubbles Generator
  • 3 Numerical Integration of the Oxygen Transfer Rate to Water
  • 4 The Development of a Program for Calculating the Function C = F (?) for Different Compositions of the Gas Injected into the Water
  • 5 The Experimental Installation for the Injection of Air from the Atmosphere into the Water
  • 6 Comparison of the Theoretical Results with the Experimental Obtained Data
  • 7 Conclusions
  • References
  • Researches on the Use of Air Filtration Elements in the Creation of Microbubbles for Water Oxygenation
  • Abstract
  • 1 Introduction
  • 2 The Use of Micro Filters for the Production of Air Microbubbles
  • 3 The Use of Microbubbles Generators
  • 4 Determination of Pressure Losses at the Microbubbles Generator
  • 5 Conclusions
  • References
  • Direct Dynamics of Gough-Stewart Hexapod Platforms Using the Redundant Parameterisation of Rotations by Full Rotation Matrices
  • Abstract
  • 1 Introduction
  • 2 Single Hexapod Model
  • 3 Direct Dynamic Model of a Single Hexapod Using the "Rotationless Formulation"
  • 4 Single Hexapod Numerical Case Study
  • 5 Conclusions and Future Work
  • Acknowledgements
  • References
  • The Study of Pinion - Rack Mechanism Using Matlab and Spyder-Python
  • Abstract
  • 1 Introduction
  • 2 MATLAB Programming
  • 3 Python Programming
  • 4 Conclusions
  • References
  • Experimental Research Relating to the Manufacture of Parts by the Addition of Material
  • Abstract
  • 1 Introduction
  • 2 Camera Base Design
  • 3 3D Printing
  • 4 Printing Results
  • 5 Conclusions
  • References
  • Load-Based Generic Polca: Performance Assessement Using Simulation
  • Abstract
  • 1 Introduction
  • 2 Simulation Study
  • 3 Simulation Results
  • 4 Conclusions
  • Acknowledgements
  • References
  • Research on Implementation Orthopedic Prostheses Ankle by the Process Rapid Prototyping
  • Abstract
  • 1 Introduction
  • 2 Laser Sintering Processes
  • 3 Stages of a Total Ankle Prosthesis
  • 4 Conclusions
  • References
  • Some Problems Biocompatible Materials Used for Making Endoprostheses Ankle
  • Abstract
  • 1 Introduction
  • 2 The Major Components of Ankle
  • 3 Analysis of the Ankle Endoprosthesis Constructive
  • 4 Mechanisms of Wear
  • 5 The Importance of Choosing the Material for Making the Endoprosthesis Ankle
  • 6 Conclusions
  • References
  • Mathematical Modelling of the Induction Soldering Process for the Coils Connection
  • Abstract
  • 1 Introduction
  • 2 The Sextupole Magnet and the Magnetic Inductor
  • 3 The Mathematical Model
  • 4 Numerical Simulation Results
  • 5 Conclusions
  • Acknowledgements
  • References
  • Mechatronic System for Solar Energy Acquisition
  • Abstract
  • 1 Introduction
  • 2 Efficiency of Photovoltaic Systems
  • 3 Tracking Systems
  • 4 The Proposed Designed Solution
  • 5 Conclusions
  • References
  • Text Recognition for Objects Identification in the Industry
  • Abstract
  • 1 Introduction
  • 2 Methods and Procedures
  • 3 Experimental Results
  • 4 Conclusions
  • References
  • Load Forecasting in WiFi Access Points over the LTE Network
  • Abstract
  • 1 Introduction
  • 2 Methods and Procedures
  • 3 Experimental Results
  • 4 Conclusions
  • Acknowledgments
  • References
  • A New Approach for the Non-linear Analysis of the Deflection of Beams Using Lie Symmetry Groups
  • Abstract
  • 1 Introduction
  • 2 Nonlinear Deflection of Beams
  • 3 Lie Symmetry of Large Deflection of Beams
  • 4 Validation
  • 5 Conclusions
  • References
  • Coupling and Assembly Elements Using Microfabrication Technologies
  • Abstract
  • 1 Introduction
  • 2 Technical Solution
  • 3 Working Principle
  • 4 Connection Elements
  • 5 The Manufacturing Technology
  • 6 Practical Results
  • 7 The Measurement of the Coupling Structures
  • 8 Conclusions
  • Acknowledgements
  • References
  • Research Regarding the Design of a Closed-Loop Pneumatic Positioning System Without Using Proportional Equipment
  • Abstract
  • 1 Introduction
  • 2 The Proposed Solution
  • 3 The Experimental Model
  • 4 The Control Algorithms
  • 5 Conclusions
  • References
  • Pneumatic Linear Incremental Actuator
  • Abstract
  • 1 Introduction
  • 2 The Arrangement of the Proposed Actuator
  • 3 The Construction of the Actuator
  • 4 The Theoretical Determining of the Static Characteristic of the Actuator
  • 5 The Experimental Determining of the Static Characteristic of the Actuator
  • References
  • State of the Art Survey on Using Robots in Oil and Gas Industry
  • Abstract
  • 1 Introduction
  • 2 What Is a Robot?
  • 3 Technical Robotics Terms
  • 4 Specific Robot Classification
  • 4.1 Non-autonomous Robots
  • 4.2 Semi-autonomous Robots
  • 4.3 Fully Autonomous Robots
  • 5 Robot Classification in the Case of Oil and Gas Pipelines
  • 6 Pipelines
  • 7 Robotics for the Oil and Gas Industry
  • 8 Conclusions
  • References
  • Bond Graphs Modelling of Electromagnetic Actuators
  • Abstract
  • 1 Introduction
  • 2 Actuator Model
  • 3 Bond Graph Modelling
  • 4 Conclusion
  • References
  • Study on Inspection of Circular Parts Used in Mechatronics
  • Abstract
  • 1 Introduction
  • 2 Vision System
  • 3 Size Measurement Algorithm
  • 3.1 Filtering and Edge Detection
  • 3.2 Least Squares Fitting of Circles
  • 4 Experimental Results
  • 5 Conclusion
  • Acknowledgements
  • References
  • A New Method for Establishing the Performances of an Optoelectronic Sensor
  • Abstract
  • 1 Introduction
  • 2 The Optoelectronic Sensor Component of the Mini Robot Control System
  • 3 The Real Mini Robot with Autonomous Displacements
  • 3.1 Computing Relations for Movements Along Circle Arcs
  • 3.2 Computing Relations for Displacements Achieved by Rotations and Translations
  • 4 Mechanical System for Generating Standard Trajectories of a Reference Point
  • 5 Establishment of the Precision and Accuracy of the Optoelectronic Sensor for Different Speeds
  • References
  • Improving Productivity and Standard Time Updating in an Industrial Company - A Case Study
  • Abstract
  • 1 Introduction
  • 2 Literature Review
  • 3 Times and Methods
  • 4 Standard Working Time and Measurement
  • 5 Time Study
  • 6 Problem Description
  • 7 Setup Time Determination as a Standard Time
  • 8 Conclusions
  • Acknowledgements
  • References
  • Case Study Regarding Measurements Implemented with the Repair Entry a Hydrogregate Campela with Vibro Expert Diagnosis System
  • Abstract
  • 1 Introduction
  • 2 Data Acquisition and International Standards ISO 7919-1/5, 10816-1/5 10817-1
  • 2.1 The Professional VIBRO EXPERT Diagnosis System
  • 2.2 The Integrated Acquisition and VIBRO EXPERT
  • 2.3 The Accelerometer and Speed Transducers
  • 2.4 The Absolute and Relative Vibration Acquisition EXPERT VIBRO System
  • 2.5 The PROFISIGNAL Program for Data Acquisition, Processing, Presentation and Diagnosis
  • 3 Technical Conditions of Measurement According to ISO 7919-5 and ISO 10816-5
  • 4 Operating Regimes and Types of Measurements Carried Out
  • 5 Experimental Data
  • 6 Conclusions and Recommendations
  • References
  • Author Index

Dateiformat: PDF
Kopierschutz: Adobe-DRM (Digital Rights Management)

Systemvoraussetzungen:

Computer (Windows; MacOS X; Linux): Installieren Sie bereits vor dem Download die kostenlose Software Adobe Digital Editions (siehe E-Book Hilfe).

Tablet/Smartphone (Android; iOS): Installieren Sie bereits vor dem Download die kostenlose App Adobe Digital Editions (siehe E-Book Hilfe).

E-Book-Reader: Bookeen, Kobo, Pocketbook, Sony, Tolino u.v.a.m. (nicht Kindle)

Das Dateiformat PDF zeigt auf jeder Hardware eine Buchseite stets identisch an. Daher ist eine PDF auch für ein komplexes Layout geeignet, wie es bei Lehr- und Fachbüchern verwendet wird (Bilder, Tabellen, Spalten, Fußnoten). Bei kleinen Displays von E-Readern oder Smartphones sind PDF leider eher nervig, weil zu viel Scrollen notwendig ist. Mit Adobe-DRM wird hier ein "harter" Kopierschutz verwendet. Wenn die notwendigen Voraussetzungen nicht vorliegen, können Sie das E-Book leider nicht öffnen. Daher müssen Sie bereits vor dem Download Ihre Lese-Hardware vorbereiten.

Bitte beachten Sie bei der Verwendung der Lese-Software Adobe Digital Editions: wir empfehlen Ihnen unbedingt nach Installation der Lese-Software diese mit Ihrer persönlichen Adobe-ID zu autorisieren!

Weitere Informationen finden Sie in unserer E-Book Hilfe.


Dateiformat: PDF
Kopierschutz: Wasserzeichen-DRM (Digital Rights Management)

Systemvoraussetzungen:

Computer (Windows; MacOS X; Linux): Verwenden Sie zum Lesen die kostenlose Software Adobe Reader, Adobe Digital Editions oder einen anderen PDF-Viewer Ihrer Wahl (siehe E-Book Hilfe).

Tablet/Smartphone (Android; iOS): Installieren Sie die kostenlose App Adobe Digital Editions oder eine andere Lese-App für E-Books (siehe E-Book Hilfe).

E-Book-Reader: Bookeen, Kobo, Pocketbook, Sony, Tolino u.v.a.m. (nur bedingt: Kindle)

Das Dateiformat PDF zeigt auf jeder Hardware eine Buchseite stets identisch an. Daher ist eine PDF auch für ein komplexes Layout geeignet, wie es bei Lehr- und Fachbüchern verwendet wird (Bilder, Tabellen, Spalten, Fußnoten). Bei kleinen Displays von E-Readern oder Smartphones sind PDF leider eher nervig, weil zu viel Scrollen notwendig ist. Mit Wasserzeichen-DRM wird hier ein "weicher" Kopierschutz verwendet. Daher ist technisch zwar alles möglich - sogar eine unzulässige Weitergabe. Aber an sichtbaren und unsichtbaren Stellen wird der Käufer des E-Books als Wasserzeichen hinterlegt, sodass im Falle eines Missbrauchs die Spur zurückverfolgt werden kann.

Weitere Informationen finden Sie in unserer E-Book Hilfe.


Download (sofort verfügbar)

160,49 €
inkl. 7% MwSt.
Download / Einzel-Lizenz
PDF mit Adobe-DRM
siehe Systemvoraussetzungen
E-Book bestellen

160,49 €
inkl. 7% MwSt.
Download / Einzel-Lizenz
PDF mit Wasserzeichen-DRM
siehe Systemvoraussetzungen
E-Book bestellen