Proceedings of the Third International Conference on Theoretical, Applied and Experimental Mechanics

 
 
Springer (Verlag)
  • erschienen am 18. Mai 2020
  • |
  • XII, 341 Seiten
 
E-Book | PDF mit Adobe-DRM | Systemvoraussetzungen
E-Book | PDF mit Wasserzeichen-DRM | Systemvoraussetzungen
978-3-030-47883-4 (ISBN)
 

This book presents the proceedings of the 3rd edition of the International Conference on Theoretical, Applied and Experimental Mechanics.

The papers focus on all aspects of theoretical, applied and experimental mechanics, including biomechanics, composite materials, computational mechanics, constitutive modeling of materials, dynamics, elasticity, experimental mechanics, fracture mechanics, mechanical properties of materials, micromechanics, nanomechanics, plasticity, stress analysis, structures, wave propagation.


1st ed. 2020
  • Englisch
  • Cham
  • |
  • Schweiz
Springer International Publishing
  • 100
  • |
  • 96 farbige Abbildungen, 64 s/w Abbildungen, 100 farbige Tabellen
  • |
  • 64 schwarz-weiße und 96 farbige Abbildungen, 100 farbige Tabellen, Bibliographie
  • 39,52 MB
978-3-030-47883-4 (9783030478834)
10.1007/978-3-030-47883-4
weitere Ausgaben werden ermittelt
  • Intro
  • Preface
  • Contents
  • Materials: Properties, Manufacturing, Modelling
  • High-Speed Mode-I Delamination
  • Abstract
  • 1 Introduction
  • 2 Analytical Theory for DCBs Under High Rates of Loading
  • 2.1 ERR Solution for a Stationary Crack
  • 2.2 ERR Solution for a Propagating Crack
  • 2.3 Limiting Speed of Crack Propagation
  • 3 Experimental and Finite Element Method Verification
  • 4 Conclusion
  • References
  • Characterization of Dynamic Fractures for Compressed PMMA Material
  • Abstract
  • 1 Introduction
  • 2 Size Effects on Dynamic Fractures
  • 3 Discussion and Conclusion
  • References
  • Tensile Behavior of a Titanium Alloy Additively Manufactured via Selective Electron Beam Melting
  • Abstract
  • 1 Introduction
  • 2 Materials and Experimental Procedure
  • 2.1 Additive Manufacturing Processing
  • 2.2 Experimental Procedure
  • 3 Results and Discussion
  • 3.1 Phase Constitution and Microstructure
  • 3.2 Tensile Properties
  • 3.3 Fractography
  • 4 Conclusions
  • Acknowledgements
  • References
  • The Rule of Mixtures on the Elastic Buckling Response of Rectangular GLARE FML Plates Under Shear Stresses
  • Abstract
  • 1 Introduction
  • 2 Problem Definition and Finite Element Modeling Procedure
  • 3 Rule of Mixtures versus FEM Results
  • 4 Conclusions
  • References
  • Evaluating Bonding Characteristics of Joggled Lap CFRP Using Acoustic Emission Techniques
  • Abstract
  • 1 Introduction
  • 2 Materials and Methods
  • 2.1 Materials
  • 2.2 Testing Methods
  • 2.3 Unsupervised Pattern Recognition Technique
  • 2.4 Wavelet Packet Transform
  • 3 Results and Discussions
  • 3.1 Mechanical Test Results
  • 3.2 Acoustic Emission Test Results
  • 3.3 Wavelet Packet Transform Results
  • 4 Conclusions
  • References
  • Experimental Study of Low Concentration Diffusible Hydrogen Effect on Mechanical Behaviour of Carbon Steel
  • Abstract
  • 1 Introduction
  • 2 Experimental Procedure
  • 3 Results and Discussion
  • 4 Conclusions
  • References
  • Effects of Temperature on Tensile and Fracture Behavior of Dissimilar Metal Welded Joint for Nuclear Safe-End
  • Abstract
  • 1 Introduction
  • 2 Experimental Procedures
  • 3 Results and Discussions
  • 4 Conclusions
  • References
  • A Multi-attribute Information Based Method of Material Strength Distribution Fitting
  • Abstract
  • 1 Introduction
  • 2 On the Shape Parameter of Material Strength Distribution
  • 3 On the Location Parameter
  • 4 Weibull Scale Parameter Estimation by ML Method
  • 5 Monte Carlo Verification
  • 6 Conclusions
  • Acknowledgement
  • References
  • Performance of a Carburizing Bearing Steel After Surface Nanosized
  • Abstract
  • 1 Introduction
  • 2 Experimental Procedure
  • 3 Results and Discussions
  • 3.1 Microstructures of the Surfaces of the Experimental Steels After Carburizing
  • 3.2 WRP and RCF Performance of the Surfaces After Carburizing
  • 4 Conclusions
  • Acknowledgement
  • References
  • Residual Strength and Toughness of Nano and Micro Scale Fiber Reinforced Cementitious Composites
  • Abstract
  • 1 Introduction
  • 2 Experimental Work
  • 2.1 Materials and Specimens
  • 2.2 Experimental Determination of First Crack Strength, Residual Strength and Post-crack Toughness
  • 3 Results and Discussion
  • 4 Conclusions
  • References
  • Experimental and Numerical Strategy for the Determination of Mechanical Properties Related to Human Cortical Bone Fracture
  • Abstract
  • 1 Introduction
  • 2 Experimental Test
  • 3 Numerical Simulations of the Experiment
  • 3.1 Determination of the Longitudinal Modulus of Elasticity
  • 3.2 Determination of the Fracture Energy
  • 4 Results, Discussions and Conclusion
  • References
  • Effect of External Field Treatment on the Microstructure and Deformation Behavior of Nickel-Base Superalloy
  • Abstract
  • 1 Introduction
  • 2 Experimental Procedures
  • 3 Results and Discussions
  • 4 Conclusions
  • References
  • Dynamic Speckle Contrast Imaging for Surface Defect Detection
  • Abstract
  • 1 Introduction
  • 2 Dynamic Speckle Contrast Imaging
  • 3 Results
  • 4 Conclusion
  • References
  • Experimental Investigation of the Elastic Modulus of Timber by Using Density and Fiber Orientation
  • Abstract
  • 1 Introduction
  • 2 Material Species and the Specimen
  • 3 Prediction Model for the Modulus of Elasticity
  • 4 Results and Discussions
  • 5 Conclusions
  • References
  • Effect of pH on Microstructure and Properties of Ultrasonic-Assisted Electroless Ni-P Coatings
  • Abstract
  • 1 Introduction
  • 2 Experimental Details
  • 2.1 Specimen Preparation
  • References
  • Tailoring the Toughness and Electrochemical Capacitance of CNT Reinforced Mortars
  • Abstract
  • 1 Introduction
  • 2 Results
  • 3 Conclusions
  • References
  • Fracture
  • The Creep Resistance of Short-Fibre Reinforced Metal Matrix Composites
  • Abstract
  • 1 Introduction
  • 2 Experimental
  • 3 Creep Strengthening of the Composite
  • 4 Results and Discussion
  • 4.1 Creep in Monolithic and Fibre-Reinforced AZ 91 and QE 22 Alloys
  • 4.2 Direct Strengthening Due to a Load Transfer
  • 4.3 Indirect Strengthening Due to a Threshold Stress s0
  • 4.4 Matrix/Reinforcement Bonding
  • 5 Conclusions
  • Acknowledgement
  • References
  • Adhesive Joint Fracture Under Combined Pulsed and Vibrational Loading
  • Abstract
  • 1 Introduction
  • 2 Incubation Time Criterion
  • 3 Adhesive Zone Models
  • 3.1 Membrane Approximation
  • 3.2 Beam Approximation
  • 4 Conclusion
  • References
  • Study on the Fracture Mechanism of the P91 Steel During Small Punch Tensile Testing
  • Abstract
  • 1 Introduction
  • 2 Material and Experimental Procedure
  • 3 Mechanical Behaviour
  • 3.1 Load-Displacement Curves
  • 3.2 Physical Characterization of the Deformation Process
  • 4 Deformation and Facture Mechanisms
  • 5 Conclusions
  • References
  • Damage Accumulation and Growth Models for the Creep-Fatigue Interaction
  • Abstract
  • 1 Introduction
  • 2 Damage Accumulation Model
  • 3 Mechanical Properties and Finite Element Modeling
  • 4 Results and Discussion
  • 5 Conclusions
  • References
  • Crack Growth and Plastic, Fracture Process and Damage Zones Behavior Under Mixed Mode Loading
  • Abstract
  • 1 Introduction
  • 2 Material Properties and Loading Conditions
  • 3 Plastic, Cyclic Fracture Process and Damage Zones Behavior
  • References
  • Miscellaneous (Computational Mechanics, Dynamics, Nanomaterials, Plasticity, Wave Propagation)
  • Parametric Resonance of a Micro-beam with Flexible Support Under Fringing Field Excitation
  • Abstract
  • 1 Introduction
  • 2 Problem Formulation
  • 3 Dynamic Analysis
  • 4 Conclusions
  • References
  • Measurement of Elastic Nonlinearities Using the Fundamental Edge Wave Mode
  • Abstract
  • 1 Introduction
  • 2 Mechanics of Higher-Harmonic Generation
  • 3 Experimental Methodology
  • 4 Results
  • 5 Conclusion
  • Acknowledgment
  • References
  • Unsteady Axisymmetric Electro-Magneto-Elastic Oscillations of a Continuous Cylinder Under the External Displacement Field
  • Abstract
  • 1 Problem Statement
  • 1.1 Basic Equations
  • 1.2 Initial and Boundary Conditions
  • 2 Solution Methods
  • References
  • Development of Micro-mechanical Models of Fatigue Damage
  • Abstract
  • 1 Introduction
  • 2 Theoretical Framework
  • 3 Selected Results
  • 4 Conclusion
  • Acknowledgement
  • References
  • Research on Springback of 5A02 Aluminum Alloy Considering Thickness Normal Stress in Hydroforming
  • Abstract
  • 1 Introduction
  • 2 Theoretical Analysis of Springback in Hydraulic Bulging Process
  • 3 Finite Element Simulation Analysis of Hydraulic Bulging
  • 4 Conclusion
  • References
  • On the Friction Test for Metal Forming Applications
  • Abstract
  • 1 Introduction
  • 2 Conventional Ring Compression Test
  • 3 New Ring Compression Test
  • 4 Conclusions
  • Acknowledgments
  • References
  • From the Linear Theory of Elasticity to Bending Equations for Beams with Variable Cross-Section
  • Abstract
  • 1 Statement of the Problem
  • References
  • On Different Representations of Equations for Beam with Variable Cross-Section
  • Abstract
  • 1 Beam Equations
  • Acknowledgments
  • References
  • Shear Residual Stresses Induced by Torsional Loading
  • Abstract
  • 1 Motivation
  • 2 Experimental and Numerical Methods
  • References
  • Elastoplastic Analysis of Re-entrant Cell Formation in Auxetic Foams Under Compression and Heat Treatment
  • Abstract
  • 1 Introduction
  • 2 Results and Discussion
  • References
  • Analytical Modeling of the Thermo-Mechanical Behavior of a Friction-Pendulum Seismic Isolator
  • Abstract
  • 1 Introduction
  • 2 Equations of Motion
  • 3 Response of the Sliding Interface
  • References
  • Symposium on Theoretical and Experimental Approaches in Mechanics of Solids with Nonhomogeneities and Defects, by Roman Kushnir
  • Damage Accumulation and Limit State of Welded Pipelines with Corrosion-Erosion Metal Loss Due to Ultra-Low-Cycle Fatigue
  • Abstract
  • 1 Introduction
  • 2 Numerical Procedure for Prediction of Limit State of Welded Pipeline with Corrosion-Erosion Metal Loss Under Ultra-Low-Cycle Loading
  • 2.1 Main Assumptions and Material Model
  • 2.2 Finite-Element Description of Physical-Mechanical Processes in Ultra-Low-Cycle Loading of Welded Pipeline with Local Corrosion-Erosion Metal Loss
  • 3 Results and Discussion
  • References
  • Unsteady Elastic-Diffusion Oscillations of a Simply Supported Kirchhoff Plate Under the Distributed Transverse Load Action
  • Abstract
  • 1 Problem Formulation
  • 2 Solution Method
  • Reference
  • A Dynamic Contact Problem of Torsion that Reduces to the Singular Integral Equation with Two Fixed Singularities
  • Abstract
  • 1 Introduction
  • 2 Statement of the Problem and Its Reduction to a Singular Integral Equation
  • 3 The Numerical Solution of Integral Equation
  • 4 Results of Numerical Analysis and Conclusions
  • References
  • Some Dynamic Problems for Layered Composites
  • Abstract
  • 1 Introduction
  • 2 Mathematical Formulation of the Problem
  • 3 The Theoretical Results
  • 4 An Example of Applying Theoretical Results
  • 5 Conclusions
  • References
  • The Influence of Geometric Parameters on the Bearing Capacity of Transformable-Volume Structure
  • Abstract
  • 1 Features of the Formation of Geometry TVS
  • 2 Determination of the Influence of TVS Geometric Parameters on the Bearing Capacity
  • 2.1 Natural Frequencies of Smooth Conical Sections
  • 2.2 Natural Frequencies of Corrugated Conical Elements
  • 2.3 TVS Stress Strain State Determination
  • 3 Conclusions
  • References
  • The Influence of Mixed Conditions on the Stress Concentration in the Neighborhood of Interfacial Inclusions in an Inhomogeneous Transversely Isotropic Space
  • Abstract
  • 1 Formulation of the Problem
  • 2 The Solution of the SIE
  • References
  • On an Approach to the Thermoelastic Analysis of Nonhomogeneous Solids
  • Abstract
  • 1 Introduction
  • 2 Analysis of Thermal Stresses in Nonhomogeneous Solids
  • 2.1 The Idea of the Method
  • 2.2 A One-Dimensional Problem
  • 2.3 A Two-Dimensional Problem
  • 2.4 An Axisymmetric Problem
  • Acknowledgement
  • References
  • The Stress State Near the Corner Point of the Interface of Piecewise Homogeneous Plane in the Presence of Interfacial Shear Cracks
  • Abstract
  • 1 Formulation of the Problem
  • 2 Solution of the Wiener - Hopf Equation
  • 3 Investigation of the Behavior of Stresses in the Vicinity of a Corner Point
  • References
  • Coupled Non-stationary Longitudinal Vibrations of an Infinite Electromagnetoelastic Rod
  • Abstract
  • 1 Problem Statement
  • 2 The Solution in the Image Space
  • 3 Originals of the Influence Functions and Solutions
  • 4 Examples for the Calculation
  • 5 Conclusion
  • References
  • The Effect of Cracks Interaction in Materials Under Loading Along Cracks
  • Abstract
  • 1 Introduction
  • 2 Problems Formulations
  • 3 Fredholm Integral Equations. Stress Intensity Factors
  • 4 Numerical Results
  • 5 Conclusions
  • References
  • Safe Loading of the Orthotropic Plate with Periodic System of Collinear Cracks
  • Abstract
  • 1 Limiting State of an Orthotropic Plate with Periodic System of Collinear Cracks
  • 2 Safe Loading of a Viscoelastic Orthotropic Plate, Weakened by a Periodic System of Collinear Cracks
  • 3 Conclusions
  • References
  • Boundary Element Analysis of Partially Debonded Shell-Like Rigid Inclusions in Anisotropic Medium
  • Abstract
  • 1 Introduction
  • 2 Modelling of Partially Debonded Rigid Shell-Like Inclusions
  • 2.1 Boundary Integral Equations of Anisotropic Thermoelasticity
  • 2.2 Inclusion Model and Boundary Conditions
  • 3 Boundary Element Approach
  • 4 Discussion and Further Studies
  • References
  • The Transmission of an Acoustic Wave Through a Composite Plate with Energy Dissipation in a Material Taken into Account Based on Three-Dimensional Equations of Elasticity Theory
  • Abstract
  • 1 Introduction
  • 2 Statement of the Problem and the Construction of its Solution
  • 3 Calculation Results and Their Analysis
  • Acknowledgment
  • References
  • Vibration of the Plate with Integral Layer Damping: Experimental and Theoretical Studies
  • Abstract
  • 1 Introduction
  • 2 Experimental Studies
  • 3 Refined Finite Element Model of an Elongated Plate with Integral Layer Damping
  • Acknowledgment
  • References
  • Thermomagnetoelectroelasticity of Bimaterial Solids with High Temperature Conducting Interface and Thin Internal Inhomogeneities
  • Abstract
  • 1 Introduction
  • 2 Governing Equations of Thermomagnetoelectroelasticity
  • 3 Problem Statement
  • 4 Numerical Examples
  • 5 Conclusions
  • References
  • Fracture of Composite Materials Under Compression Along Cracks
  • Abstract
  • 1 Compression Along Cracks
  • 1.1 Problem Formulation
  • 1.2 Exploratory Procedure
  • 1.3 Results
  • References
  • Development of Welded Elements of the Railway Freight Car Bogie with Increased Characteristics of Fatigue Resistance and Survivability
  • Abstract
  • 1 Conclusions
  • References
  • Electron Beam Additive Technology Optimization Using Mathematical Modeling
  • Abstract
  • 1 Introduction
  • 2 Microstructure
  • 3 Mathematical Model
  • 3.1 Mathematical Model for Temperature Fields
  • 3.2 Comparing of 2D and 3D Thermal Field Models
  • 3.3 Results for Residual Stresses and Distortions
  • 4 Optimization of Technology, Varying Time ?t and Temperature
  • 5 Comparing with Experiment
  • References
  • Non-stationary Contact Problems for Thin Shells and Solids
  • Abstract
  • 1 Problem Formulation
  • 2 Calculation Examples
  • Acknowledgments
  • References
  • Shear Buckling Mode and Failure of Sandwich Specimen Facing Layer Under Four-Point Bending
  • Abstract
  • 1 Introduction
  • 2 Statement of the Problem
  • 3 Results of Numerical Experiments
  • Acknowledgments
  • References
  • Model of Low-Cycle Deformation of Stainless Steel Under Soft Loading
  • Abstract
  • 1 Introduction
  • 2 Constitutive Equations of the Plasticity Model
  • 3 Results of the Experiment and Numerical Simulation
  • 4 Conclusion
  • Acknowledgements
  • References
  • Creep and Long-Term Strength of Structures
  • Abstract
  • 1 Introduction
  • 2 Technique and Numerical Results
  • 3 Conclusion
  • Acknowledgements
  • References
  • Mathematical Modeling of Nonlinear Dynamic Deformation and Failure of Metal-Plastic Shells of Revolution
  • Abstract
  • References
  • Impact of Transient Pressure on a Half-Space with Membrane Type Coating
  • Abstract
  • 1 Problem Formulation
  • 2 Method of Solution of Problem
  • Acknowledgment
  • References
  • Fracture Nanomechanics, Fatigue and Fracture at Small Scales (experiments and simulations) by Pasquale Gallo
  • Some Considerations on Stress Intensity Factor at Atomic Scale
  • Abstract
  • 1 Introduction
  • 2 Review of Recent Molecular Statistics Simulations on Cracked Samples
  • 3 Results and Discussion
  • References
  • Initial Intergranular Cracking of Ni-Base Superalloys Due to the Degradation of the Crystallinity of Grain Boundaries Under Creep-Fatigue Loading
  • Abstract
  • 1 Introduction
  • 2 Experimental Methods
  • 3 Degradation of the Crystallinity of Alloy 617
  • Acknowledgments
  • References
  • Characterization of Microstructurally Small Fatigue Crack Behavior
  • 1 Extended Abstract
  • References
  • An Atomic-Level Unified Criterion for Brittle Fracture
  • Abstract
  • 1 Introduction
  • 2 Results and Discussion
  • 3 Conclusions
  • Acknowledgments
  • References
  • Fatigue of Micro/Nano Metals
  • Abstract
  • Acknowledgments
  • References
  • Author Index

Dateiformat: PDF
Kopierschutz: Adobe-DRM (Digital Rights Management)

Systemvoraussetzungen:

Computer (Windows; MacOS X; Linux): Installieren Sie bereits vor dem Download die kostenlose Software Adobe Digital Editions (siehe E-Book Hilfe).

Tablet/Smartphone (Android; iOS): Installieren Sie bereits vor dem Download die kostenlose App Adobe Digital Editions (siehe E-Book Hilfe).

E-Book-Reader: Bookeen, Kobo, Pocketbook, Sony, Tolino u.v.a.m. (nicht Kindle)

Das Dateiformat PDF zeigt auf jeder Hardware eine Buchseite stets identisch an. Daher ist eine PDF auch für ein komplexes Layout geeignet, wie es bei Lehr- und Fachbüchern verwendet wird (Bilder, Tabellen, Spalten, Fußnoten). Bei kleinen Displays von E-Readern oder Smartphones sind PDF leider eher nervig, weil zu viel Scrollen notwendig ist. Mit Adobe-DRM wird hier ein "harter" Kopierschutz verwendet. Wenn die notwendigen Voraussetzungen nicht vorliegen, können Sie das E-Book leider nicht öffnen. Daher müssen Sie bereits vor dem Download Ihre Lese-Hardware vorbereiten.

Bitte beachten Sie bei der Verwendung der Lese-Software Adobe Digital Editions: wir empfehlen Ihnen unbedingt nach Installation der Lese-Software diese mit Ihrer persönlichen Adobe-ID zu autorisieren!

Weitere Informationen finden Sie in unserer E-Book Hilfe.


Dateiformat: PDF
Kopierschutz: Wasserzeichen-DRM (Digital Rights Management)

Systemvoraussetzungen:

Computer (Windows; MacOS X; Linux): Verwenden Sie zum Lesen die kostenlose Software Adobe Reader, Adobe Digital Editions oder einen anderen PDF-Viewer Ihrer Wahl (siehe E-Book Hilfe).

Tablet/Smartphone (Android; iOS): Installieren Sie die kostenlose App Adobe Digital Editions oder eine andere Lese-App für E-Books (siehe E-Book Hilfe).

E-Book-Reader: Bookeen, Kobo, Pocketbook, Sony, Tolino u.v.a.m. (nur bedingt: Kindle)

Das Dateiformat PDF zeigt auf jeder Hardware eine Buchseite stets identisch an. Daher ist eine PDF auch für ein komplexes Layout geeignet, wie es bei Lehr- und Fachbüchern verwendet wird (Bilder, Tabellen, Spalten, Fußnoten). Bei kleinen Displays von E-Readern oder Smartphones sind PDF leider eher nervig, weil zu viel Scrollen notwendig ist. Mit Wasserzeichen-DRM wird hier ein "weicher" Kopierschutz verwendet. Daher ist technisch zwar alles möglich - sogar eine unzulässige Weitergabe. Aber an sichtbaren und unsichtbaren Stellen wird der Käufer des E-Books als Wasserzeichen hinterlegt, sodass im Falle eines Missbrauchs die Spur zurückverfolgt werden kann.

Weitere Informationen finden Sie in unserer E-Book Hilfe.


Download (sofort verfügbar)

255,73 €
inkl. 5% MwSt.
Download / Einzel-Lizenz
PDF mit Adobe-DRM
siehe Systemvoraussetzungen
E-Book bestellen

255,73 €
inkl. 5% MwSt.
Download / Einzel-Lizenz
PDF mit Wasserzeichen-DRM
siehe Systemvoraussetzungen
E-Book bestellen