Intelligent Systems in Production Engineering and Maintenance

 
 
Springer (Verlag)
  • erschienen am 31. Juli 2018
  • |
  • XIX, 785 Seiten
 
E-Book | PDF mit Adobe-DRM | Systemvoraussetzungen
E-Book | PDF mit Wasserzeichen-DRM | Systemvoraussetzungen
978-3-319-97490-3 (ISBN)
 

The book presents a collection of 103 peer-reviewed articles from the Second International Conference on Intelligent Systems in Production Engineering and Maintenance (ISPEM 2018). The conference was organized by the Faculty of Mechanical Engineering and CAMT (Centre for Advanced Manufacturing Technologies), Wroclaw University of Science and Technology and was held in Wroclaw (Poland) on 17-18 September 2018.

The conferences topics included the possibility of using a wide range of intelligent methods in production engineering, presenting and discussing new solutions for innovative plants, research findings and case studies demonstrating advances in production and maintenance from the point of view of Industry 4.0 - particularly applications of intelligent systems, methods and tools in production engineering, maintenance, logistics, quality management, information systems and product development.

The book is divided into two parts: the first includes papers related to intelligent systems in production engineering, while the second is dedicated to special sessions focusing on:

1. Computer Aided methods in Production Engineering

2. Mining 4.0 and Intelligent Mining Transportation

3. Modelling and Simulation of Production Processes

4. Multi-Faceted Modelling of Networks and Processes

5. Product Design and Product Manufacturing in Industry 4.0

This book is an excellent source of information for scientists in the field of manufacturing engineering and for top managers in production enterprises.


1st ed. 2019
  • Englisch
  • Cham
  • |
  • Schweiz
Springer International Publishing
  • 354 s/w Abbildungen
  • |
  • 354 schwarz-weiße Abbildungen, Bibliographie
  • 131,53 MB
978-3-319-97490-3 (9783319974903)
10.1007/978-3-319-97490-3
weitere Ausgaben werden ermittelt
  • Intro
  • Preface
  • Organization
  • Executive Committee
  • Honorary Chair
  • General Chairs
  • Co-chairs
  • Program Committee
  • Organizing Committee
  • Organized by
  • Contents
  • Intelligent Systems in Production Engineering and Maintenance
  • 3D Geometry Recognition for a PMI-Based Mixed Reality Assistant System in Prototype Construction
  • Abstract
  • 1 Introduction
  • 2 Aims and Requirements
  • 3 Concept
  • 4 Prototype Implementation and Validation
  • 4.1 Module 1: Image Acquisition
  • 4.2 Module 2: Part Recognition
  • 4.3 Evaluation
  • 5 Conclusion
  • References
  • A Computer Application for Drone Parametrization: Developing Solution for Drone Manufacturing
  • Abstract
  • 1 Introduction
  • 2 A Brief Framework of Drone
  • 3 Methodological Approach
  • 4 Case Study
  • 5 Discussion and Conclusions
  • Acknowledgement
  • References
  • A New Approach to Design of a Cyberphysical System Exemplified by Its Use in the Electro-Hydraulic H ...
  • Abstract
  • 1 Introduction
  • 2 Description of Process-Oriented Approach to a Design of a Hybrid Drive CPS
  • 3 Experimental Investigation
  • 4 Conclusions
  • Acknowledgments
  • References
  • An Analysis of the Efficiency of a Parallel-Serial Manufacturing System Using Simulation
  • Abstract
  • 1 Introduction
  • 2 The Model of the Manufacturing System
  • 3 Results of Simulation Experiments
  • 4 Conclusions
  • References
  • Aperiodic Surface Topographies Based on High Precision Grinding Processes: Analysis of Cutting Fluid ...
  • Abstract
  • 1 Introduction
  • 2 Goal of Research Study
  • 3 Base of Operations
  • 3.1 Manufacturing and Cleaning of Cutlery Samples
  • 3.2 Measurement Systems and Key Characteristics Describing Surface Topology
  • 3.3 Non-parametric Statistics
  • 3.4 Measurement Strategy
  • 4 Case Study "Grinding Surfaces": Application and Results
  • 5 Summary
  • Acknowledgements
  • References
  • Application of a Multidimensional Scaling Method to Identify the Factors Influencing on Reliability of Deep Wells
  • Abstract
  • 1 Introduction
  • 2 Survival and Hazard Functions
  • 3 Comparison of Reliability of Objects
  • 4 Analysis of Well Reliability
  • 5 Conclusions
  • References
  • Case Study of Production Planning Optimization with Use of the Greedy and Tabu Search Algorithms
  • Abstract
  • 1 Introduction
  • 2 Differences Between Algorithms
  • 2.1 Methodology
  • 2.2 Greedy Algorithm
  • 2.3 Tabu Search
  • 3 Case Study
  • 3.1 Description of the Company's Technological Process
  • 3.2 Problem Description
  • 3.3 Chosen Parameters
  • 4 Case Study Algorithms
  • 4.1 Solutions of the Greedy Algorithm
  • 4.2 Solutions of the Tabu Search Algorithm
  • 4.3 Comparison of Algorithm Results
  • 5 Summary
  • References
  • Collaborative Network Planning Using Auction Parallel to Pool-Based Energy Market with Shifting Bids
  • Abstract
  • 1 Introduction
  • 2 Production-Distribution Planning Model
  • 2.1 Traditional Integrated Production-Distribution Planning Model
  • 2.2 Auction-Based Production-Distribution Planning Model
  • 3 Pricing Production-Distribution Auction
  • 3.1 Idea of Uplift Minimizing Pricing Scheme
  • 3.2 Uplifts Required for Individual Producers
  • 3.3 Uplifts Required for Individual Distributors
  • 4 Illustrative Example
  • 5 Conclusions
  • References
  • Combination of the Earned Value Method and the Agile Approach - A Case Study of a Production System Implementation
  • Abstract
  • 1 Introduction
  • 2 Earned Value Method
  • 3 Agile Approach and Its Combination with the Earned Value Method
  • 4 Case Study
  • 5 Conclusions
  • References
  • Computer Simulation of the Operation of a Longwall Complex Using the "Process Flow" Concept of FlexS ...
  • Abstract
  • 1 Introduction
  • 2 Overview of Software for the Modeling and Simulation
  • 3 Modeling and Simulation in Mining
  • 3.1 Mining of Hard Coal with a Longwall Complex
  • 3.2 FlexSim Software
  • 3.3 "Process Flow" Concept
  • 4 Simulation Model of a Longwall Complex
  • 4.1 3D Model of a Longwall Shearer
  • 4.2 Model Operation Logic - Process Flow
  • 4.3 Parameters to Be Analyzed
  • 5 Conclusions
  • Acknowledgments
  • References
  • Concept of Power Grid Resiliency to Severe Space Weather
  • 1 Introduction
  • 2 Principles of Space Weather Impact on Power Grids
  • 3 Properties of Resiliency and Its Implication
  • 4 Discussion and Conclusions
  • References
  • Promoting Cross-Border Cooperation Between Science and Small Businesses as a Source of Innovation
  • Abstract
  • 1 Introduction
  • 2 Theoretical Framework of the Study
  • 3 Influencing Factors, Research Subjects and Course of the Study
  • 4 Empirical Findings
  • 4.1 1st Sub-study: Companies
  • 4.2 2nd Sub-study: Intermediary Actors and Organisations
  • 5 Summary
  • 6 Conclusions and Strategic Recommendations
  • 7 Limitations of the Studies and Future Research
  • References
  • Definition of Characteristic Values for the Efficient and Safe Implementation of Electronic Cam Gears
  • Abstract
  • 1 Introduction
  • 2 Parameter Identification
  • 2.1 Modeling
  • 2.2 Extension for the Feedback Control Technology
  • 2.3 Transfer to a Test Bench
  • 3 Conclusions
  • References
  • Design of Performance Indicators Based on Effective Time and Throughput Variability. Case Study in Mining Industry
  • Abstract
  • 1 Introduction and Problem Statement
  • 2 Historical Analysis and Design of Performance Indicators
  • 2.1 Methodology to Increase the Understanding of the System
  • 2.2 Design of the Indicators
  • 3 Case Study
  • 4 Discussion and Conclusions
  • References
  • Development of an Intelligent Drainage-Humidifying Control System Based on Neo-Fuzzy Neural Networks
  • Abstract
  • 1 Introduction
  • 2 The Mathematical Models of Moisture Transfer in Unsaturated Zone of the Module Soil Area
  • 3 Control Methods of the Moisture Content of Agricultural Crops
  • 4 Software and Hardware of the Automated Control System
  • 5 Summary
  • References
  • Evolution of Technical Systems Maintenance Approaches - Review and a Case Study
  • Abstract
  • 1 Introduction
  • 2 The Main Definitions and Scope of Maintenance
  • 3 Maintenance Approaches Evolution
  • 4 Case Study
  • 5 Summary
  • References
  • Forecasting the Mountability Level of a Robotized Assembly Station
  • Abstract
  • 1 Introduction
  • 2 Description of a Neural Model
  • 3 Training of the Artificial Neural Network
  • 4 Mathematical Modeling
  • 5 Results
  • 6 Summary
  • References
  • Identification of Challenges to be Overcome in the Process of Enhancing Innovativeness Based on Impl ...
  • Abstract
  • 1 Introduction
  • 2 Methodology
  • 3 The Introduction of Projects
  • 3.1 Introduction to NUCLEI Project
  • 3.2 Introduction to TRANS3net Project
  • 4 Analysis of Project Implementation Effectiveness
  • 5 Identified Problems in Projects Implementation
  • 6 Recommendations and Conclusions
  • References
  • Improvement of Production Process Scheduling with the Use of Heuristic Methods
  • Abstract
  • 1 Introduction
  • 2 Case Study
  • 2.1 Example Used in Algorithms
  • 3 Methods Used in Studied Company
  • 3.1 Accepted Parameters
  • 3.2 Greedy Algorithm
  • 3.3 Solutions of the Greedy Algorithm
  • 3.4 Tabu Search
  • 3.5 Solutions of the Tabu Search Algorithm
  • 3.6 Comparison of Results
  • 4 Conclusion
  • References
  • Intuitive Methods of Industrial Robot Programming in Advanced Manufacturing Systems
  • Abstract
  • 1 Introduction
  • 2 Conventional Approaches to Industrial Robot Programming
  • 3 Intuitive Programming of Industrial Robots
  • 4 Summary and Conclusions
  • References
  • Manufacturing Activities Modelling for the Purpose of Machining Process Plan Generation
  • Abstract
  • 1 Introduction
  • 2 The Idea of Process Planning with Semi-generative Method
  • 2.1 Definition and Formal Description of Manufacturing Activities
  • 2.2 The Machining Process Template and Manufacturing Knowledge
  • 3 Formal Description of Automated Manufacturing System State
  • 4 Process Plan Definition as a Set of Manufacturing Activities
  • 5 Practical Use of Manufacturing Activities Models
  • 6 Summary
  • Acknowledgements
  • References
  • Model of Application of Cluster Analysis in Storage Area Designing
  • Abstract
  • 1 Introduction
  • 2 Model of Application of Cluster Analysis in Storage Area Designing
  • 3 Example of the Application of Cluster Analysis in Storage Area Designing
  • 3.1 Preparatory Stage
  • 3.2 Realisation Stage - Cluster Analysis
  • 3.3 Evaluation and Proposition Stage
  • 4 Conclusion
  • Acknowledgements
  • References
  • Module for Prediction of Technological Operation Times in an Intelligent Job Scheduling System
  • Abstract
  • 1 Introduction
  • 2 Variable Processing Times as the Source of Production Process Uncertainty
  • 3 Processing Times Uncertainty in the Literature
  • 4 Module for Prediction of Variable Processing Times
  • 5 Technological Operations Times as Time Series
  • 5.1 Mathematical Description of the Problem
  • 5.2 Implementation of ARMA/ARIMA Models for Prediction Processing Times
  • 6 Preliminary Tests
  • 7 Conclusions
  • References
  • Pricing and Ordering Decisions in a JELS-Model for Items with Imperfect Quality
  • 1 Introduction
  • 2 Problem Definition and Notation
  • 3 Mathematical Model Formulation
  • 3.1 Buyer's Profit Function
  • 3.2 Vendor's Cost Function
  • 3.3 Joint Profit Function
  • 4 Model Solution
  • 4.1 Independent Policy
  • 4.2 Integrated Policy
  • 5 Numerical Example and Conclusion
  • References
  • Probabilistic Fuzzy Approach to Assessment of Supplier Based on Delivery Process
  • Abstract
  • 1 Introduction
  • 2 Related Works
  • 2.1 Inference System with Probabilistic Fuzzy Knowledge Base
  • 2.2 Identification of the MISO System with Probabilistic Fuzzy Knowledge Base and Inference Parametr ...
  • 3 Assessment of the Supplier Based on Delivery Process
  • 3.1 Problem Statement
  • 3.2 The Assumptions of the System
  • 3.3 Data Collection
  • 3.4 Results and Discussion
  • 4 Conclusions
  • References
  • Processing of Design and Technological Data Due to Requirements of Computer Aided Process Planning S ...
  • Abstract
  • 1 Introduction
  • 2 Process Planning in CAPP - Identification of a Problem
  • 3 Data Exchange Between CAD and CAPP Systems
  • 4 Process Planning in CAPP Systems Based on PMI Annotations Saved in CAD Systems
  • 5 Conclusion
  • References
  • Rationalization of Decision-Making Process in Selection of Suppliers with Use of the Greedy and Tabu Search Algorithms
  • Abstract
  • 1 Introduction
  • 2 Case Study
  • 2.1 Decision-Making Problem
  • 2.2 Basic Example
  • 2.3 Parameters
  • 3 Optimization Methods
  • 3.1 Selected Algorithms
  • 3.2 Greedy Algorithm
  • 3.3 Tabu Search
  • 3.4 Comparison of Algorithms Results
  • 4 Summary
  • References
  • Risk Assessment for Potential Failures During Process Implementation Using Production Process Preparation
  • Abstract
  • 1 Introduction
  • 2 Practical Aspects of 3P Application
  • 3 Identification of Critical Risks for the Basic Steps During Implementation of New Production Process
  • 3.1 Methodology of Research
  • 3.2 Research Findings
  • 4 Conclusion
  • References
  • Strategy of Improving Skills of Innovation Managers in the Area of Advanced Manufacturing Technologies
  • Abstract
  • 1 Introduction
  • 2 Innovation Based Industry Development
  • 2.1 Management of Innovations
  • 2.2 Implementation of Innovations
  • 2.3 Development Strategies of Companies Oriented Toward Innovations and New Technologies
  • 3 Specificity of New Technologies Within Advanced Manufacturing Technologies
  • 4 Evaluation of Knowledge and Application of Solutions Within Advanced Manufacturing Methods in Lowe ...
  • 4.1 Method
  • 4.2 Results
  • 4.3 Detailed Results for Lower Silesia in Reference to Whole Sample
  • 5 Summary and Conclusions
  • Acknowledgment
  • References
  • SYNERGY Project: Open Innovation Platform for Advanced Manufacturing in Central Europe
  • Abstract
  • 1 Introduction
  • 2 Defining Open Innovation
  • 2.1 Crowdsourcing
  • 2.2 Crowdfunding
  • 2.3 Social Product Development
  • 2.4 Microworking
  • 2.5 Living Labs
  • 3 Open Innovation 2.0
  • 4 SYNERGY Project as a Step Towards the Quadruple Helix Innovation Model
  • 4.1 SYNERGY Aims and Methodology
  • 4.2 SYNERGY Work Plan
  • 5 Summary
  • References
  • The Application of Augmented Reality Technology in the Production Processes
  • Abstract
  • 1 Introduction
  • 2 Augmented Reality Technology in the Support and Monitoring of Production Processes
  • 3 Structure and Operating Principles of a System Using Augmented Reality Technology
  • 4 Method for Supporting the Assembly Process
  • 5 An Example of the Application of Augmented Reality Technology in the Assembly of Control Cabinets
  • 6 Summary
  • Acknowledgments
  • References
  • The Application of Software Tecnomatix Jack for Design the Ergonomics Solutions
  • Abstract
  • 1 Introduction
  • 1.1 Importance, Aims and Benefits of Ergonomics in Business Logistics
  • 1.2 Ergonomic Risks in the Work Process of Business Logistics
  • 1.3 Tecnomatix Jack Description
  • 2 Case Study of Implementation of Tx Jack in Selected Company
  • 2.1 Short Characteristic of Selected Company
  • 2.2 Creating a Simulation Model of Workplace
  • 3 Application of Analysis RULA and LBA in Software Tx Jack
  • 4 Proposal of a New Workplace Layout
  • 4.1 Design of a New Workplace Layout
  • 4.2 Design of Improvement the Workplace from the Ergonomic Point of View
  • 5 Conclusion
  • Acknowledgements
  • References
  • The Concept of an Integrated Company Management System Combining the Results in Favour of Sustainable Development with the Company Indicator System
  • Abstract
  • 1 Introduction
  • 2 Sustainable Development Strategy in the Company
  • 3 Integrated Company Management System
  • 4 Operational Activity in the Integrated Management System
  • 5 Summary
  • References
  • The Concept of Intelligent Chlorine Dosing System in Water Supply Distribution Networks
  • Abstract
  • 1 Introduction
  • 2 The Goals and Assumptions of the Numerical Experiment
  • 3 The Concept of the Chlorine Concentration Control System
  • 4 Optimization Method and Obtained Results
  • 5 Discussion of the Obtained Results
  • References
  • The Framework of IT Tool Supporting Layout Redesign in a Selected Industrial Company
  • Abstract
  • 1 Introduction
  • 2 Research Design and Methodology
  • 3 Literature Review
  • 3.1 Facility Layout Design
  • 4 The Framework of Tool Supporting Facility Layout Design
  • 4.1 Brief Characteristic of a Company
  • 4.2 Framework of the Solution
  • 5 Functional Requirements of the Developed Tool
  • 6 Conclusions and Outlook
  • References
  • Virtual Commissioning as the Main Core of Industry 4.0 - Case Study in the Automotive Paint Shop
  • Abstract
  • 1 Introduction
  • 2 Virtual Engineering and Commissioning
  • 2.1 Virtual Engineering
  • 2.2 Virtual Commissioning
  • 3 Case Study
  • 3.1 Structure of Simulation Station
  • 3.2 Virtual Commissioning Environment
  • 3.3 3D Plant Visualization
  • 3.4 SCADA/HMI
  • 4 Experimental Research
  • 4.1 Case Study Assumptions
  • 4.2 Experimental Results and Discussion
  • 5 Conclusions
  • Acknowledgements
  • References
  • Computer Aiding in Production Engineering
  • Computer Aiding Simulation of the Mechatronics Function of an Intelligent Building
  • Abstract
  • 1 Introduction
  • 1.1 Mechatronics Function
  • 1.2 Buildtronics Concept
  • 2 Virtual Analysis of an Intelligent Building
  • 2.1 Concept of the Mechatronics Function of a Building
  • 2.2 Operation of Particular Systems
  • 2.3 Activators Modeling
  • 2.4 Central Control Module
  • 2.5 Buildings Modeling
  • 3 Conclusions
  • References
  • Practical Approach of Flexible Job Shop Scheduling Using Costs and Finishing Times of Operations
  • Abstract
  • 1 Introduction
  • 2 Production Planning
  • 3 Example
  • 4 Conclusion
  • References
  • The Evolution of the Robotized Workcell Using the Concept of Cobot
  • Abstract
  • 1 Introduction
  • 2 Integration and Safety
  • 3 Conclusion
  • References
  • Petri Nets in Modelling and Simulation of the Hierarchical Structure of Manufacturing Systems
  • Abstract
  • 1 Introduction
  • 2 Petri Nets
  • 2.1 Introduction
  • 2.2 The Characteristic of the Selected Petri Net Extensions
  • 2.3 Synthesis of the Petri Nets as a Method of Modelling of Complex Manufacturing Systems
  • 3 The Petri Nets Formalism in Context of Computer Simulation of Manufacturing Systems
  • 3.1 The Draft of the Alternative Method of the System's Hierarchy Representation
  • 4 Conclusions
  • References
  • Virtual Activating of a Robotized Production Cell with Use of the Mechatronics Concept Designer Modu ...
  • Abstract
  • 1 Introduction
  • 2 Description of the Analyzed Technological Process
  • 3 Preparation of the Manufacturing Workcell Model for Virtual Activating
  • 4 Virtual Activating of the Manufacturing Workcell Model Using the OPC Server
  • 5 Conclusions
  • References
  • Modelling and Simulation of Production Processes
  • A Declarative Modelling Framework for Routing of Multiple UAVs in a System with Mobile Battery Swapping Stations
  • Abstract
  • 1 Introduction
  • 2 Routing of Mobile Battery Swapping Stations
  • 2.1 An Illustrative Example
  • 2.2 Problem Statement
  • 3 Declarative Modelling
  • 3.1 Constraints Satisfaction Problem Refinement
  • 4 Computational Results
  • 5 Conclusions
  • Acknowledgements
  • References
  • Competence-Based Workforce Allocation for Manual Assembly Lines
  • Abstract
  • 1 Introduction
  • 2 Competence Modeling
  • 3 Workforce Allocation Algorithm
  • 4 Case Study - Manual Assembly Line
  • 5 Simulation Results
  • 6 Conclusions
  • References
  • Development of a Simulation Platform for Robots with Serial and Parallel Kinematic Structure
  • Abstract
  • 1 Introduction
  • 2 Development of Simulation Software for Robots with Serial Kinematic Structure
  • 2.1 SLR1500 Simulation Program - Version 2004
  • 2.2 RoboSim Simulation Program - Version 2015
  • 3 Adjustment and Testing of Simulation Software for Mechanisms with Parallel Kinematic Structure
  • 4 Conclusions
  • Acknowledgement
  • References
  • Interactive Layout in the Redesign of Intralogistics Systems
  • Abstract
  • 1 Introduction
  • 2 Intralogistics Design and Redesign
  • 3 Problem Definition and Motivation
  • 4 The Concept of Interactive Layout
  • 5 Implementation of Interactive Layout
  • 6 Conclusion and Futher Research
  • Acknowledgements
  • References
  • Technical Diagnostics at the Department of Automation and Production Systems
  • Abstract
  • 1 Introduction
  • 2 Diagnostics of Machine Tools
  • 2.1 Measurement of Machine Tools with a Laser Interferometer
  • 2.2 Measurement of Machine Tools with Ballbar
  • 2.3 Machine Tool Monitoring
  • 3 Diagnostics of Industrial Robots
  • 3.1 Industrial Robot Measurements with a Laser Interferometer
  • 3.2 Industrial Robot Measurements with a Ballbar
  • 4 Diagnostics of Production Lines
  • 4.1 Machine Learning in Technical Diagnostics
  • Acknowledgement
  • References
  • Use of Dynamic Simulation in Warehouse Designing
  • Abstract
  • 1 Introduction
  • 2 Digital Factory and Warehousing
  • 2.1 Detailed Design in a Digital Factory Environment
  • 2.2 Dynamic Verification of Proposed Solution in the Digital Factory Concept
  • 2.3 Software Solution Implementation into a Warehouse Operation
  • 2.4 Proposed Methodology Conclusion
  • 3 Implementation Example of Dynamic Simulation Methodology When Deciding About Storing Process and Picking
  • 3.1 Experiment Results
  • 3.2 Experiment Result Assessment
  • 4 Conclusion
  • Acknowledgements
  • References
  • Using Modern Ergonomics Tools to Measure Changes in the Levels of Stress Placed on the Psychophysiological Functions of a Human During Load Manipulations
  • Abstract
  • 1 Measuring Psychophysiological Functions Using CAPTIV
  • 1.1 CAPTIV Sensor System
  • 1.2 Material Manipulation as the Most Hazardous Logistics Activity
  • 1.3 T-Sens HRM Sensor for Measuring Heart Rate Variability
  • 1.4 Slovak Laws as They Relate to Heart Rate
  • 1.5 T-Sens GSR Sensor for Measuring Galvanic Skin Conductivity
  • 1.6 Slovak Laws as They Relate to GSR
  • 2 Influence of Increased Physical Stress on a Person's Health
  • 2.1 The Psychophysiological Functions Monitored During Manual Material Manipulation
  • 2.2 The Process of Measuring Psychophysiological Functions
  • 2.3 Laboratory Testing of Heart Rate Changes During Manual Load Manipulation
  • 3 Conclusion
  • Acknowledgement
  • References
  • Yamazumi Analysis in Milk-Run Intralogistics Systems Using Simulation Tools
  • Abstract
  • 1 Introduction
  • 2 Optimization of Milk-Run System and Yamazumi Analysis in Literature
  • 3 Yamazumi Analysis in Simulation
  • 3.1 Analysis of Activities Performed by Logistics Train Operator
  • 3.2 Definition of Yamazumi Classes and Its Assignment to Operator Activities
  • 3.3 Simulation Experiment and Analysis of Charts in Simulation Model
  • 4 Simulation Experiments and Analysis
  • 5 Conclusions
  • Acknowledgments
  • References
  • Product Design and Product Manufacturing in Industry 4.0
  • Automation and Digitization of the Material Selection Process for Ecodesign
  • Abstract
  • 1 Introduction
  • 2 Literature Review
  • 3 Methods
  • 4 Author's Expert System for Material Selection in Ecodesign Using Decision Tree Induction Method
  • 4.1 Data Preparation
  • 4.2 A Decision Tree for Material Selection
  • 4.3 Operation of Expert System for Material Selection
  • 5 Summary
  • Acknowledgements
  • References
  • Automation of the Ecodesign Process for Industry 4.0
  • Abstract
  • 1 Introduction
  • 2 Industry 4.0 Concept and Ecodesign
  • 3 Research Methodology
  • 4 Automation of the Analysis of Recycling Properties of the Product
  • 5 Example of Method Application
  • 6 Final Remarks
  • References
  • Efficiency of Automatic Design in the Production Preparation Process for an Intelligent Factory
  • Abstract
  • 1 Introduction
  • 2 SmartFactory Laboratory at PUT
  • 3 Aim of the Work
  • 4 Automated Design System for SmartFactory Laboratory
  • 4.1 Description of the CAD Solution
  • 4.2 Automatic Design System Preparation
  • 4.3 Integration of Configuration and Design Process
  • 5 Efficiency Evaluation of Automatic Design System
  • 6 Conclusions
  • Acknowledgements
  • References
  • Low-Cost 3D Printing in Innovative VR Training and Prototyping Solutions
  • Abstract
  • 1 Introduction
  • 2 Materials and Methods
  • 2.1 Case and Problem Definition - VR Application for Training and Prototyping
  • 2.2 Manipulation Idea - A Tracking System
  • 2.3 Interactable Object Preparation
  • 2.4 Manufacturing of Ultrasound Heads
  • 3 Results and Discussion
  • 4 Summary
  • Acknowledgements
  • References
  • Safety Improvement of Industrial Drives Manual Control by Application of Haptic Joystick
  • Abstract
  • 1 Introduction
  • 2 Design of Joysticks with Force Generation
  • 3 Modelling and Simulation of the Haptic Control Systems
  • 4 Experimental Tests
  • 5 Conclusion
  • Acknowledgment
  • References
  • Scanp - Integration and Adaptation of Scanning and Rapid Prototyping Device Prepared for Industry 4.0
  • Abstract
  • 1 Introduction
  • 2 Device Development
  • 2.1 Simplified Electronics Schematic
  • 2.2 Scanp Device Design
  • 2.3 FDM Printer Integration
  • 2.4 3D Scanner Design and Implementation
  • 3 Internet of Things Integration
  • 3.1 REST Server
  • 3.2 3D Models Storage
  • 3.3 3D Models and Status Information Database
  • 4 Measurements and Tests
  • 5 Conclusion
  • References
  • The Application of a Vision System to Detect Trajectory Points for Soldering Robot Programming
  • Abstract
  • 1 Introduction
  • 2 PCB Image Processing Algorithm
  • 3 Results of Processing of Different PCB Sample Images
  • 4 Conclusion
  • Acknowledgment
  • References
  • The Idea of "Industry 4.0" in Car Production Factories
  • Abstract
  • 1 Introduction
  • 2 The Main Features of "Industry 4.0" Concept
  • 3 Industry 4.0 in the Car Production Sector
  • 4 Conclusion
  • Acknowledgment
  • References
  • Mining 4.0 and Intelligent Mining Transportation
  • Process-Oriented Approach for Analysis of Sensor Data from Longwall Monitoring System
  • Abstract
  • 1 Introduction
  • 2 Process Mining
  • 3 Problem Description
  • 4 Creation of an Event Log of Shearer Operation Process
  • 4.1 Process Stages Definition
  • 4.2 Creation of an Event Log
  • 5 Conclusions
  • Acknowledgements
  • References
  • Analysis of Moving Averages of BWEs Actual Capacity
  • Abstract
  • 1 Utilization of BWEs Theoretical Capacity in Lignite Mines
  • 2 BWE Actual Volume Capacities as a Time Series
  • 3 Belts and Conveyors Dimensioning
  • 4 Time Series of Amount of Material on a Conveyor Belt
  • 5 Moving Averages of BWE Actual Volume Capacity
  • 6 Conclusions
  • References
  • Application of the Discrete Element Method (DEM) for Simulation of the Ore Flow Inside the Shaft Ore ...
  • Abstract
  • 1 Introduction
  • 2 Discrete Element Method - Theoretical Grounds
  • 3 Preparation of the Simulation Environment
  • 4 Simulation Summary and Discussion
  • 5 Conclusion
  • Acknowledgements
  • References
  • Conveyor Belt 4.0
  • Abstract
  • 1 The Fourth Industrial Revolution
  • 2 Mining 4.0
  • 3 Belt Conveying 4.0
  • 4 Conveyor Belt 4.0
  • 5 Conclusions
  • Acknowledgements
  • References
  • Probabilistic Modeling of Mining Production in an Underground Coal Mine
  • Abstract
  • 1 Introduction
  • 2 Stochastic Networks, GERTS Method
  • 3 Modeling and Optimization Method of Mining Operations with an Application of Stochastic Networks
  • 3.1 Main Definitions and Assumptions
  • 3.2 Characteristics of Mining Operations (Network Activities)
  • 4 An Example of the Production Modelling in a Coal Mine
  • 5 Conclusions
  • Acknowledgements
  • References
  • Random Loading of Blasted Ore with Regard to Spatial Variations of Its Actual Lithological Compound
  • Abstract
  • 1 Introduction
  • 2 Computational Details
  • 3 Results and Discussion
  • 4 Conclusions
  • Acknowledgements
  • References
  • Multi-faceted Modelling of Networks and Processes
  • BPMN Update Proposal for Non-expert Users
  • Abstract
  • 1 Introduction
  • 2 Methodology
  • 3 Related Works
  • 3.1 Proposals and Limitations of Selecting the Dynamic Process Modeling Notation
  • 3.2 Changes in the Functionality of Systems Supporting Process Management
  • 3.3 Proposals of Expanding the BPMN Notation in Accordance with Its Standard
  • 4 Proposal of a BPMN Notation Update
  • 4.1 Dedicated Process Views
  • 4.2 The Subprocess Checklist - an Additional Standard Form of an Ad Hoc Process
  • 5 Conclusion and Future Works
  • References
  • Envisioning Spread Page Applications: Network-Based Computing Documents for Decision Support in Operations Management
  • Abstract
  • 1 Introduction
  • 2 Ishikawa Diagrams and Bayesian Belief Networks
  • 2.1 Ishikawa-BBN Diagrams as Interactive Documents
  • 3 Feature-Rich Framework for Teamwork Decision Making
  • 3.1 Multi-role Divide and Conquer
  • 3.2 Scenario-Based What-if Analyses
  • 3.3 Fully Documented Reasoning and Judgment
  • 4 An Illustrative Example: Medium Term Capacity Planning
  • 5 Conclusions
  • References
  • Security and Risk as a Primary Feature of the Production Process
  • Abstract
  • 1 Introduction
  • 2 Risk of the Production Process and Classic Risk Assessment Models
  • 3 The Safety Model of the Production Process in the Aspect of Risk Analysis
  • 4 Conclusions
  • References
  • Spread Page Challenges for Accessibility in Business Modeling
  • Abstract
  • 1 Introduction
  • 2 Operating System and Standard Applications Accessibility
  • 3 Web Content Accessibility
  • 4 Math Notation Accessibility
  • 5 UML Diagrams Accessibility
  • 6 Electronic Circuit Scheme Accessibility
  • 7 Geographical Maps Accessibility
  • 8 Production Engineering Models' Accessibility
  • 9 Spread Page in Business Modeling Accessibility Assurance
  • 10 Conclusions
  • References
  • The Essence of Reflexive Control and Diffusion of Information in the Context of Information Environment Security
  • Abstract
  • 1 Introduction
  • 2 The Essence of Reflexive Control
  • 2.1 Reflexion
  • 2.2 Reflexive Control
  • 2.3 The Framework of Reflexive Control Processes
  • 2.4 Reflexive Control in Modern Strongly Connected World
  • 3 Modelling Social Media and Diffusion of (Dis)Information
  • 3.1 Diffusion and Standard Approach for Modelling This Process
  • 3.2 Importance of Connections Patterns
  • 3.3 Modelling of Social Media
  • 3.4 Identifying the Roles of Agents in Social Media
  • 3.5 Modelling Behavior of Agents Within Social Media
  • 4 Summary
  • References
  • The Supply Chain of the Future - Intelligent and Sustainable Supply Chain Management
  • Flexibility Strategy in Delayed Differentiation Model of Steel Products
  • Abstract
  • 1 Introduction
  • 2 Flexibility of Distribution System in Delayed Product Differentiation Model
  • 3 The Concept of Distribution System Flexibility Research
  • 4 Assumptions of Flexible Implementation Strategy Modeling of Steel Pipes Orders in Delayed Product ...
  • 5 Strategy of Flexible Reaction to Demand Changes
  • 6 Conclusions
  • References
  • Key Competencies of Supply Chain Managers - Comparison of the Expectations of Practitioners and Theoreticians' Vision
  • Abstract
  • 1 Introduction
  • 2 Supply Chains of the Future - Intelligent and Sustainable
  • 3 Competencies of Future Managers
  • 4 The Research Results
  • 5 Conclusion
  • References
  • Logistical Aspects of Transition from Traditional to Additive Manufacturing
  • Abstract
  • 1 Introduction
  • 1.1 AM Technologies
  • 1.2 Areas of Application
  • 2 Effects of AM Implementation in Logistics
  • 2.1 Analyzed Areas
  • 2.2 Processes and Procedures
  • 3 Conclusions
  • References
  • Reconfiguration to Renovation in a Sustainable Supply Chain
  • Abstract
  • 1 Introduction
  • 2 Sustainable Supply Chain
  • 3 A Brief Description of the Industry and Product Harmfulness
  • 4 Supply Chain Characteristics
  • 5 Renovation
  • 6 Conclusion
  • References
  • The Framework of Logistics 4.0 Maturity Model
  • Abstract
  • 1 Motivation
  • 2 Research Design and Methodology
  • 3 Literature Review
  • 3.1 Logistics 4.0 and Smart Supply Chain Management
  • 3.2 Overview on Maturity Models and Tools
  • 4 The Framework of Logistics 4.0 Maturity Model
  • 4.1 Dimensions
  • 4.2 Maturity Levels
  • 5 Conclusions and Outlook
  • References
  • Author Index

Dateiformat: PDF
Kopierschutz: Adobe-DRM (Digital Rights Management)

Systemvoraussetzungen:

Computer (Windows; MacOS X; Linux): Installieren Sie bereits vor dem Download die kostenlose Software Adobe Digital Editions (siehe E-Book Hilfe).

Tablet/Smartphone (Android; iOS): Installieren Sie bereits vor dem Download die kostenlose App Adobe Digital Editions (siehe E-Book Hilfe).

E-Book-Reader: Bookeen, Kobo, Pocketbook, Sony, Tolino u.v.a.m. (nicht Kindle)

Das Dateiformat PDF zeigt auf jeder Hardware eine Buchseite stets identisch an. Daher ist eine PDF auch für ein komplexes Layout geeignet, wie es bei Lehr- und Fachbüchern verwendet wird (Bilder, Tabellen, Spalten, Fußnoten). Bei kleinen Displays von E-Readern oder Smartphones sind PDF leider eher nervig, weil zu viel Scrollen notwendig ist. Mit Adobe-DRM wird hier ein "harter" Kopierschutz verwendet. Wenn die notwendigen Voraussetzungen nicht vorliegen, können Sie das E-Book leider nicht öffnen. Daher müssen Sie bereits vor dem Download Ihre Lese-Hardware vorbereiten.

Bitte beachten Sie bei der Verwendung der Lese-Software Adobe Digital Editions: wir empfehlen Ihnen unbedingt nach Installation der Lese-Software diese mit Ihrer persönlichen Adobe-ID zu autorisieren!

Weitere Informationen finden Sie in unserer E-Book Hilfe.


Dateiformat: PDF
Kopierschutz: Wasserzeichen-DRM (Digital Rights Management)

Systemvoraussetzungen:

Computer (Windows; MacOS X; Linux): Verwenden Sie zum Lesen die kostenlose Software Adobe Reader, Adobe Digital Editions oder einen anderen PDF-Viewer Ihrer Wahl (siehe E-Book Hilfe).

Tablet/Smartphone (Android; iOS): Installieren Sie die kostenlose App Adobe Digital Editions oder eine andere Lese-App für E-Books (siehe E-Book Hilfe).

E-Book-Reader: Bookeen, Kobo, Pocketbook, Sony, Tolino u.v.a.m. (nur bedingt: Kindle)

Das Dateiformat PDF zeigt auf jeder Hardware eine Buchseite stets identisch an. Daher ist eine PDF auch für ein komplexes Layout geeignet, wie es bei Lehr- und Fachbüchern verwendet wird (Bilder, Tabellen, Spalten, Fußnoten). Bei kleinen Displays von E-Readern oder Smartphones sind PDF leider eher nervig, weil zu viel Scrollen notwendig ist. Mit Wasserzeichen-DRM wird hier ein "weicher" Kopierschutz verwendet. Daher ist technisch zwar alles möglich - sogar eine unzulässige Weitergabe. Aber an sichtbaren und unsichtbaren Stellen wird der Käufer des E-Books als Wasserzeichen hinterlegt, sodass im Falle eines Missbrauchs die Spur zurückverfolgt werden kann.

Weitere Informationen finden Sie in unserer E-Book Hilfe.


Download (sofort verfügbar)

255,73 €
inkl. 5% MwSt.
Download / Einzel-Lizenz
PDF mit Adobe-DRM
siehe Systemvoraussetzungen
E-Book bestellen

255,73 €
inkl. 5% MwSt.
Download / Einzel-Lizenz
PDF mit Wasserzeichen-DRM
siehe Systemvoraussetzungen
E-Book bestellen