International Conference on Semiconductor Materials and Technology (ICoSeMT 2019, 29-30 April 2019, Penang, Malaysia) was an inaugural event organized by the Institute of Nano Optoelectronics Research and Technology (INOR) and Universiti Sains Malaysia (USM) in conjunction with the 50th Anniversary of USM. This volume presents for readers the collection of papers that were represented on this event and reflects the modern trends in the area of materials science and technologies for opto- and microelectronics, photovoltaic systems, and photocatalysis, in analyze properties of modern functional materials, polymers, and composites. This collection will be useful for specialists from many branches of modern manufacture.
International Conference on Semiconductor Materials and Technology (ICoSeMT 2019, 29-30 April 2019, Penang, Malaysia) was an inaugural event organized by the Institute of Nano Optoelectronics Research and Technology (INOR) and Universiti Sains Malaysia (USM) in conjunction with the 50th Anniversary of USM. This volume presents for readers the collection of papers that were represented on this event and reflects the modern trends in the area of materials science and technologies for opto- and microelectronics, photovoltaic systems, and photocatalysis, in analyze properties of modern functional materials, polymers, and composites. This collection will be useful for specialists from many branches of modern manufacture.
Reihe
Sprache
Verlagsort
Zielgruppe
Illustrationen
Illustrations, unspecified
Maße
Höhe: 240 mm
Breite: 170 mm
Dicke: 13 mm
Gewicht
ISBN-13
978-3-0357-1681-8 (9783035716818)
DOI
Copyright in bibliographic data and cover images is held by Nielsen Book Services Limited or by the publishers or by their respective licensors: all rights reserved.
Schweitzer Klassifikation
<ul><li>Preface</li><li>Chapter 1: Materials and Technologies for Production in Opto- and Microelectronics</li><li>Morphological, Structural and Optical Characteristics of Porous GaN Fabricated by UV-Assisted Electrochemical Etching</li><li>Porosification Analysis on the Effect of Resistivity Dependence on N-Type Pulsed Porous Silicon</li><li>The Effect of Needle Diameter on Optical Properties and Morphological Structure of La<sub>2</sub>O<sub>3</sub>- PVA Phosphor Nanofibers Prepared by Electrospinning Method</li><li>The Effect of Hydrogen Concentration on Chemical Vapour Deposition Synthesis of <i>?</i>-Ga<sub>2</sub>O<sub>3</sub> Nanostructures</li><li>Morphological and Structural Properties of Sol-Gel Derived ZnO Thin Films Spin-Coated on Different Substrates</li><li>Spin Coated CuO with Different Additives (PEG) Value Thin Film: Physical, Structural, Optical and Electrical Characteristics of CuO/PEG</li><li>UV_Blue Light Conversion Using Dyes Polymeric Materials</li><li>Study of the Effect of Injection Currents on White Light Emission of Ce-Doped YAG Phosphor Powder Prepared by Microwave Combustion</li><li>Synthesis and Characterization of YAG:Ce Phosphor by Microwave Induced Combustion Synthesis with Different Fuel Sources</li><li>Chromaticity Properties of Curcuminoids Dye Nanofibers Prepared by Electrospinning for White Light Down-Conversion</li><li>Chapter 2: Materials for Sensing Technologies and Planar Unipolar Devices</li><li>Agarose-Chitosan Based Hydrogel Waveguide Matrix: Comparison Synthesis and Performance for Optical Leaky Waveguide (OLW) Biosensor</li><li>Effect of Li Substitution in MgO Nanostructured on Band Gap Energy via Combustion Synthesis Method</li><li>Fabrication of SiNWs-FET Nanostructure Via Atomic Force Microscopy Lithography</li><li>Improved Rectification Performance and Terahertz Detection in Hybrid Structure of Self-Switching Device (SSD) and Planar Barrier Diode (PBD) Using Two-Dimensional Device Simulation</li><li>Photometric Detection of Heavy Metals Using Biosynthesized Gold Nanoparticles</li><li>Preparation of Novel Commercial Polyaniline Composites for Ammonia Detection</li><li>Chapter 3: Materials in Photovoltaics and Photocatalytic Technologies</li><li>Application of Conjugated Chlorophyll from Natural Dye (<i>Imperata cylindrica</i>) to Apply in Hybrid DSSC as Third Generation Solar Energy</li><li>Boron Nitride Doped Polypyrrole Hybrid Composites for Photocatalytic Degradation of 2-Chlorophenol from Aqueous Solution</li><li>Effect of Ultrasonic Agitation and Spin Coating Speed on the Photovoltaic Properties of Inverted Organic Solar Cell Using Solution-Dispersed Copper Iodide as Anode Buffer Layer</li><li>A Simplest, Cheapest and Most Efficienct Technique to Enhance the Performance of Solid State Dye-Sensitized Solar Cell: Deposition of Purple Seaweed as a Photosensitizer</li><li>Broadband Anti-Reflection in Black Silicon Fabricated by Two-Step Silver-Assisted Wet Chemical Etching for Photovoltaics</li><li>Photocatalytic Fuel Cell Based on Zinc Oxide Loaded Carbon Plate Photoanode for Simultaneous Photocatalytic Degradation of Azo Dyes and Electricity Generation</li><li>Ray Tracing of Light Trapping Schemes in Thin Crystalline Silicon for Photovoltaics</li><li>Chapter 4: Functional and Special Materials</li><li>Electrochemical Performance of Mn and Fe Substitution in LiCo<sub>0.9</sub>X<sub>0.1</sub>O<sub>2 </sub>Cathode Materials</li><li>Impact of Eu Nanoparticles Substitution for Ca Site in Bi(Pb)-2223 Cuprates Superconductor</li><li>Long Chain Imidazolium Ionic Liquids as Templates in the Formation of Mesoporous Silica Nanospheres</li><li>Chapter 5: Polymeric and Composite Materials</li><li>Effect of Acetylation Contact Time to the Physical and Mechanical Properties of Jack Fruit Rind Cellulose Acetate (JR-CA) Reinforced Gelatine Film</li><li>Study on Effect of Fiber Orientation on Flexural Properties of Glass Fiber Reinforced Epoxy Composite Laminates for Structural Applications</li></ul>
